Download or read book Numerical study of the stimulation related thermo hydro mechanical processes in tight gas and deep geothermal reservoirs written by Wentao Feng and published by Cuvillier Verlag. This book was released on 2020-03-05 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing in combination with horizontal well is playing a key role in the efficient development of unconventional gas/oil reservoirs and deep geothermal resources. However, the integral operation, especially from the perspective of THM (Thermal-Hydraulic-Mechanic) interactions have not been studied systematically. In this thesis, targeted improvements were achieved through developing a series of mathematical/physical models, and their implementation into the existing numerical tools (FLAC3Dplus and TOUGH2MP-FLAC3D), including: (a) a new thermal module for FLAC3Dplus based entirely on the finite volume method (FVM), which is especially developed for the fracturing process and can also achieve the modeling of gel breaking; (b) a rock damage module of TOUGH2MP-FLAC3D, which also considers the impacts of rock damaging process on evolution of permeability; (c) an in-depth improved FLAC3Dplus simulator that obtains the ability to simulate a 3D fracture propagation with arbitrary orientation. After the corresponding verifications, the improved tools were applied in different case studies to reveal: a) influences of the fluid’s viscosity on the fracturing results in tight sandstone reservoirs; b) the induced seismicity during the fracturing operation and the reactivation of the natural faults; and c) the fracture propagation with arbitrary orientation.
Download or read book Science of Carbon Storage in Deep Saline Formations written by Pania Newell and published by Elsevier. This book was released on 2018-09-06 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science of Carbon Storage in Deep Saline Formations: Process Coupling across Time and Spatial Scales summarizes state-of-the-art research, emphasizing how the coupling of physical and chemical processes as subsurface systems re-equilibrate during and after the injection of CO2. In addition, it addresses, in an easy-to-follow way, the lack of knowledge in understanding the coupled processes related to fluid flow, geomechanics and geochemistry over time and spatial scales. The book uniquely highlights process coupling and process interplay across time and spatial scales that are relevant to geological carbon storage. Includes the underlying scientific research, as well as the risks associated with geological carbon storage Covers the topic of geological carbon storage from various disciplines, addressing the multi-scale and multi-physics aspects of geological carbon storage Organized by discipline for ease of navigation
Download or read book Thermo Hydro Mechanical THM coupled simulations of innovative enhanced geothermal systems for heat and electricity production as well as energy storage written by Muhammad Haris and published by Cuvillier Verlag. This book was released on 2022-08-05 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enhanced geothermal systems (EGSs) evolved from the hot dry rock can provide a significant amount of energy while shifting towards negligible carbon emission. In order to investigate some important issues related to EGS, several scenarios have been analyzed using powerful numerical tools (FLAC3Dplus and TOUGH2MP-TMVOC). While conducting multiple hydraulic fracturing, it is observed that the newly created successive fracture’s configuration highly depends on the previous one under the influence of stress shadow. Therefore, the assumption of using similar multiple fracture geometries and shapes for energy exploitation may lead to erroneous estimations. A case study has been performed further using the engineering data of the GeneSys project in the North German Basin. Numerous scenarios have been investigated, and the optimized EGS project is proposed, whose installed power capacity of one side of the injection well declines from 7.17 MW to 5.08 MW over 30 years. Moreover, the Levelized cost of electricity is calculated at 5.46 c$/kWh, which is quite economical compared to the current electricity price. Finally, an innovative concept of regenerative EGS is proposed by storing surplus renewable energy in multiple hydraulic fractures that can reduce the reservoir temperature reduction rate. The results of continuous injection/production cycles depicted that a regenerative EGS could be achieved in reality.
Download or read book Coupled Thermo Hydro Mechanical Processes in Fractured Rock Masses written by Fengshou Zhang and published by Springer Nature. This book was released on 2023-09-11 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of thermo-hydro-mechanical coupled processes in fractured rock masses has close relevance to energy-related deep earth engineering activities, such as enhanced geothermal systems, geological disposal of radioactive waste, sequestration of CO2, long-term disposal of waste water and recovery of hydrocarbons from unconventional reservoirs. Despite great efforts by engineers and researchers, comprehensive understanding of the thermo-hydro-mechanical coupled processes in fractured rock mass remains a great challenge. The discrete element method (DEM), originally developed by Dr. Peter Cundall, has become widely used for the modeling of a rock mass, including its deformation, damage, fracturing and stability. DEM modeling of the coupled thermo-hydro-mechanical processes in fractured rock masses can provide some unique insights, to say the least, for better understanding of those complex issues. The authors of this book have participated in various projects involving DEM modeling of coupled thermo-hydro-mechanical processes during treatment of a rock mass by fluid injection and/or extraction and have provided consulting services to some of the largest oil-and-gas companies in the world. The breadth and depth of our engineering expertise are reflected by its successful applications in the major unconventional plays in the world, including Permian, Marcellus, Bakken, Eagle Ford, Horn River, Chicontepec, Sichuan, Ordos and many more. The unique combination of the state-of-the-art numerical modeling techniques with state-of-the-practice engineering applications makes the presented material relevant and valuable for engineering practice. We believe that it is beneficial to share the advances on this subject and promote some further development.
Download or read book Numerical study of physico chemical interactions for CO2 sequestration and geothermal energy utilization in the Ordos Basin China written by Hejuan Liu and published by Cuvillier Verlag. This book was released on 2014-11-10 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this dissertation, three simulators (i.e. TOUGH2MP, TOUGHREACT and FLAC3D) were used to simulate the complex physical and chemical interactions induced by CO2 sequestration. The simulations were done instages, ranging from the two phase (water and CO2) fluid flow (H2), through coupled hydro-mechanical effects (H2M) and geochemical responses (i.e. CO2-water-rock interactions (H2C)), to the extension of CCS to CCUS by the application of combined geothermal production and CO2 sequestration technologies. The findings of this study are essential for a thorough understanding of the complex interactions in the multiphase, multicomponent porous media controlled by different physical and chemical mechanisms. Furthermore, the simulation results will provide an invaluable reference for field operations in CCS projects, especially for the full-integration pilot scale CCS project launched in the Ordos Basin. Subsequently, a preliminary site selection scheme for the combined geothermal production and CO2 sequestration was set up, which considered various factorsinvolved in site selection, ranging from safety, economical, environmental and technical issues. This work provides an important framework for the combined geothermal production and CO2 sequestration project. However, further numerical and field studies are still needed to improve on a series of criteria and related parameters necessary for a better understanding of the technology.
Download or read book Understanding Faults written by David Tanner and published by Elsevier. This book was released on 2019-10-08 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding Faults: Detecting, Dating, and Modeling offers a single resource for analyzing faults for a variety of applications, from hazard detection and earthquake processes, to geophysical exploration. The book presents the latest research, including fault dating using new mineral growth, fault reactivation, and fault modeling, and also helps bridge the gap between geologists and geophysicists working across fault-related disciplines. Using diagrams, formulae, and worldwide case studies to illustrate concepts, the book provides geoscientists and industry experts in oil and gas with a valuable reference for detecting, modeling, analyzing and dating faults. Presents cutting-edge information relating to fault analysis, including mechanical, geometrical and numerical models, theory and methodologies Includes calculations of fault sealing capabilities Describes how faults are detected, what fault models predict, and techniques for dating fault movement Utilizes worldwide case studies throughout the book to concretely illustrate key concepts
Download or read book Numerical study of coupled THM C processes related to geo energy production written by Yang Gou and published by Cuvillier Verlag. This book was released on 2018-06-20 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis a parallel simulation platform, namely TOUGH2MP-FLAC3Dplus, was further developed by linking the multiphase multicomponent flow code TOUGH2MP and the further developed geomechanical code FLAC3Dplus for large-scale simulation of the coupled THM/C processes related to geo-energy production. A series of mathematical/physical models were developed and implemented in this platform, including (1) an improved equation of state for CO2-CH4-H2O-NaCl system which considers the effect of salt on phase partition and fluid properties in gas reservoirs; (2) a modified coupling approach for the simulation of hydraulic fracturing in tight geo-reservoirs, which considers the multiphase multicomponent leakoff effects; (3) a thermo-hydro-mechanical model based on a crack tensor for naturally fractured rock masses and faults. All these verified models have been applied in three different case studies, including CO2 enhanced gas recovery (EGR) in the Altmark natural gas field; (2) Hydraulic fracturing in three different types of geo-reservoirs (tight gas, oil and geothermal reservoir); (3) Geothermal energy utilization induced seismicity in Unterhaching. The developed models and the numerical platform can be used to predict the coupled THM/C behavior of rock formations, to optimize the CO2-EGR and hydraulic fracturing in tight geo-reservoirs, as well as reduce the geo-risks related to geo-energy production.
Download or read book Harmonising Rock Engineering and the Environment written by Qihu Qian and published by CRC Press. This book was released on 2011-09-14 with total page 2048 pages. Available in PDF, EPUB and Kindle. Book excerpt: Harmonising Rock Mechanics and the Environment comprises the proceedings (invited and contributed papers) of the 12th ISRM International Congress on Rock Mechanics (Beijing, China, 18-21 October 2011). The contributions cover the entire scope of rock mechanics and rock engineering, with an emphasis on the critical role of both disciplines in sustai
Download or read book Petroleum Abstracts Literature and Patents written by and published by . This book was released on 1989 with total page 1528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Crustal Permeability written by Tom Gleeson and published by John Wiley & Sons. This book was released on 2016-10-18 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Permeability is the primary control on fluid flow in the Earth’s crust and is key to a surprisingly wide range of geological processes, because it controls the advection of heat and solutes and the generation of anomalous pore pressures. The practical importance of permeability – and the potential for large, dynamic changes in permeability – is highlighted by ongoing issues associated with hydraulic fracturing for hydrocarbon production (“fracking”), enhanced geothermal systems, and geologic carbon sequestration. Although there are thousands of research papers on crustal permeability, this is the first book-length treatment. This book bridges the historical dichotomy between the hydrogeologic perspective of permeability as a static material property and the perspective of other Earth scientists who have long recognized permeability as a dynamic parameter that changes in response to tectonism, fluid production, and geochemical reactions.
Download or read book Petroleum Abstracts written by and published by . This book was released on 1993 with total page 1752 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermo Hydro Mechanical Modeling of Working Fluid Injection and Thermal Energy Extraction in Egs Fractures and Rock Matrix written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Development of enhanced geothermal systems (EGS) will require creation of a reservoir of sufficient volume to enable commercial-scale heat transfer from the reservoir rocks to the working fluid. A key assumption associated with reservoir creation/stimulation is that sufficient rock volumes can be hydraulically fractured via both tensile and shear failure, and more importantly by reactivation of naturally existing fractures (by shearing), to create the reservoir. The advancement of EGS greatly depends on our understanding of the dynamics of the intimately coupled rock-fracture-fluid-heat system and our ability to reliably predict how reservoirs behave under stimulation and production. Reliable performance predictions of EGS reservoirs require accurate and robust modeling for strongly coupled thermal-hydrological-mechanical (THM) processes. Conventionally, these types of problems have been solved using operator-splitting methods, usually by coupling a subsurface flow and heat transport simulators with a solid mechanics simulator via input files. An alternative approach is to solve the system of nonlinear partial differential equations that govern multiphase fluid flow, heat transport, and rock mechanics simultaneously, using a fully coupled, fully implicit solution procedure, in which all solution variables (pressure, enthalpy, and rock displacement fields) are solved simultaneously. This paper describes numerical simulations used to investigate the poro- and thermal- elastic effects of working fluid injection and thermal energy extraction on the properties of the fractures and rock matrix of a hypothetical EGS reservoir, using a novel simulation software FALCON (Podgorney et al., 2011), a finite element based simulator solving fully coupled multiphase fluid flow, heat transport, rock deformation, and fracturing using a global implicit approach. Investigations are also conducted on how these poro- and thermal-elastic effects are related to fracture permeability evolution.
Download or read book Volcanic Unrest written by Joachim Gottsmann and published by Springer. This book was released on 2018-12-18 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book summarizes the findings of the VUELCO project, a multi-disciplinary and cross-boundary research funded by the European Commission's 7th framework program. It comprises four broad topics: 1. The global significance of volcanic unrest 2. Geophysical and geochemical fingerprints of unrest and precursory activity 3. Magma dynamics leading to unrest phenomena 4. Bridging the gap between science and decision-making Volcanic unrest is a complex multi-hazard phenomenon. The fact that unrest may, or may not lead to an imminent eruption contributes significant uncertainty to short-term volcanic hazard and risk assessment. Although it is reasonable to assume that all eruptions are associated with precursory activity of some sort, the understanding of the causative links between subsurface processes, resulting unrest signals and imminent eruption is incomplete. When a volcano evolves from dormancy into a phase of unrest, important scientific, political and social questions need to be addressed. This book is aimed at graduate students, researchers of volcanic phenomena, professionals in volcanic hazard and risk assessment, observatory personnel, as well as emergency managers who wish to learn about the complex nature of volcanic unrest and how to utilize new findings to deal with unrest phenomena at scientific and emergency managing levels. This book is open access under a CC BY license.
Download or read book Petroleum Related Rock Mechanics written by Erling Fjær and published by Elsevier. This book was released on 2008-01-04 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers and geologists in the petroleum industry will find Petroleum Related Rock Mechanics, 2e, a powerful resource in providing a basis of rock mechanical knowledge - a knowledge which can greatly assist in the understanding of field behavior, design of test programs and the design of field operations. Not only does this text give an introduction to applications of rock mechanics within the petroleum industry, it has a strong focus on basics, drilling, production and reservoir engineering. Assessment of rock mechanical parameters is covered in depth, as is acoustic wave propagation in rocks, with possible link to 4D seismics as well as log interpretation. Learn the basic principles behind rock mechanics from leading academic and industry experts Quick reference and guide for engineers and geologists working in the field Keep informed and up to date on all the latest methods and fundamental concepts
Download or read book Efficient Simulation of Thermal Enhanced Oil Recovery Processes written by Zhouyuan Zhu and published by Stanford University. This book was released on 2011 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulating thermal processes is usually computationally expensive because of the complexity of the problem and strong nonlinearities encountered. In this work, we explore novel and efficient simulation techniques to solve thermal enhanced oil recovery problems. We focus on two major topics: the extension of streamline simulation for thermal enhanced oil recovery and the efficient simulation of chemical reaction kinetics as applied to the in-situ combustion process. For thermal streamline simulation, we first study the extension to hot water flood processes, in which we have temperature induced viscosity changes and thermal volume changes. We first compute the pressure field on an Eulerian grid. We then solve for the advective parts of the mass balance and energy equations along the individual streamlines, accounting for the compressibility effects. At the end of each global time step, we account for the nonadvective terms on the Eulerian grid along with gravity using operator splitting. We test our streamline simulator and compare the results with a commercial thermal simulator. Sensitivity studies for compressibility, gravity and thermal conduction effects are presented. We further extended our thermal streamline simulation to steam flooding. Steam flooding exhibits large volume changes and compressibility associated with the phase behavior of steam, strong gravity segregation and override, and highly coupled energy and mass transport. To overcome these challenges we implement a novel pressure update along the streamlines, a Glowinski scheme operator splitting and a preliminary streamline/finite volume hybrid approach. We tested our streamline simulator on a series of test cases. We compared our thermal streamline results with those computed by a commercial thermal simulator for both accuracy and efficiency. For the cases investigated, we are able to retain solution accuracy, while reducing computational cost and gaining connectivity information from the streamlines. These aspects are useful for reservoir engineering purposes. In traditional thermal reactive reservoir simulation, mass and energy balance equations are solved numerically on discretized reservoir grid blocks. The reaction terms are calculated through Arrhenius kinetics using cell-averaged properties, such as averaged temperature and reactant concentrations. For the in-situ combustion process, the chemical reaction front is physically very narrow, typically a few inches thick. To capture accurately this front, centimeter-sized grids are required that are orders of magnitude smaller than the affordable grid block sizes for full field reservoir models. To solve this grid size effect problem, we propose a new method based on a non-Arrhenius reaction upscaling approach. We do not resolve the combustion front on the grid, but instead use a subgrid-scale model that captures the overall effects of the combustion reactions on flow and transport, i.e. the amount of heat released, the amount of oil burned and the reaction products generated. The subgrid-scale model is calibrated using fine-scale highly accurate numerical simulation and laboratory experiments. This approach significantly improves the computational speed of in-situ combustion simulation as compared to traditional methods. We propose the detailed procedures to implement this methodology in a field-scale simulator. Test cases illustrate the solution consistency when scaling up the grid sizes in multidimensional heterogeneous problems. The methodology is also applicable to other subsurface reactive flow modeling problems with fast chemical reactions and sharp fronts. Displacement front stability is a major concern in the design of all the enhanced oil recovery processes. Historically, premature combustion front break through has been an issue for field operations of in-situ combustion. In this work, we perform detailed analysis based on both analytical methods and numerical simulation. We identify the different flow regimes and several driving fronts in a typical 1D ISC process. For the ISC process in a conventional mobile heavy oil reservoir, we identify the most critical front as the front of steam plateau driving the cold oil bank. We discuss the five main contributors for this front stability/instability: viscous force, condensation, heat conduction, coke plugging and gravity. Detailed numerical tests are performed to test and rank the relative importance of all these different effects.
Download or read book Renewable Energy Resources written by John Twidell and published by Taylor & Francis. This book was released on 2006-01-16 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the years between the first and this second edition, renewable energy has come of age; it makes good sense, good government and good business. This book considers the unchanging principles of renewable energy technologies alongside modern application and case studies. In this second edition, the presentation of the fundamentals has been improved throughout, and chapters on economics and institutional factors have been added. Likewise, sections on environmental impact have been added to each technology chapter. Renewable Energy Resources supports multi-disciplinary.
Download or read book Unconventional Reservoir Geomechanics written by Jingshou Liu and published by Frontiers Media SA. This book was released on 2023-02-15 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt:
