Download or read book Numerical Software with Guaranteed Results written by Hongtao Wang and published by . This book was released on 1991 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Software with Result Verification written by René Alt and published by Springer Science & Business Media. This book was released on 2004-03-12 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-proceedings of the Dagstuhl Seminar 03041 on Numerical Software with Result Verification held at Dagstuhl Castle, Germany, in January 2003. The 18 revised full papers presented were selected during two rounds of reviewing and improvements. The papers are organized in topical sections on languages, software systems and tools, new verification techniques based on interval arithmetic, applications in science and engineering, and novel approaches to verification.
Download or read book Numerical Software Verification written by Sergiy Bogomolov and published by Springer. This book was released on 2017-02-14 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 9th InternationalWorkshop on Numerical Software Verification, NSV 2016, held in Toronto, ON, Canada in July 2011 - colocated with CAV 2016, the 28th International Conference on Computer Aided Verification. The NSV workshop is dedicated to the development of logical and mathematical techniques for the reasoning about programmability and reliability.
Download or read book Numerical Software Verification written by Alessandro Abate and published by Springer. This book was released on 2017-07-11 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 10th International Workshop on Numerical Software Verification, NSV 2017, held in Heidelberg, Germany, in July 2017 - colocated with the International Workshop on Formal Methods for Rigorous Systems Engineering of Cyber-Physical Systems, RISE4CPS 2017, a one-time, invited-only event.The 3 full papers presented together with 3 short papers, 2 keynote abstracts and 4 invited abstracts were carefully reviewed and selected from numerous submissions.The NSV 2017 workshop is dedicated to the development of logical and mathematical techniques for the reasoning about programmability and reliability.
Download or read book Proceedings of the Army Numerical and Computers Analysis Conference written by and published by . This book was released on 1981 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings written by and published by . This book was released on 1981 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Software Verification written by Majid Zamani and published by Springer. This book was released on 2019-08-02 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 12th International Workshop on Numerical Software Verification, NSV 2019, held in New York City, NY, USA, in July 2019 - colocated with the International Conference on Computer Aided Verification, CAV 2019. The 5 full papers presented together with 2 short papers, 3 abstracts of invited talks, and 2 tutorial papers were carefully reviewed and selected from numerous submissions. The NSV 2017 workshop is dedicated to the development of logical and mathematical techniques for the reasoning about programmability and reliability.
Download or read book Reliable Implementation of Real Number Algorithms Theory and Practice written by Peter Hertling and published by Springer. This book was released on 2008-08-06 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: A large amount of the capacity of today’s computers is used for computations that can be described as computations involving real numbers. In this book, the focus is on a problem arising particularly in real number computations: the problem of veri?edor reliablecomputations. Since real numbersare objects c- taining an in?nite amount of information, they cannot be represented precisely on a computer. This leads to the well-known problems caused by unveri?ed - plementations of real number algorithms using ?nite precision. While this is t- ditionally seen to be a problem in numerical mathematics, there are also several scienti?c communities in computer science that are dealing with this problem. This book is a follow-up of the Dagstuhl Seminar 06021 on “Reliable Imp- mentation of Real Number Algorithms: Theory and Practice,” which took place January 8–13, 2006. It was intended to stimulate an exchange of ideas between the di?erent communities that deal with the problem of reliable implementation of real number algorithms either from a theoretical or from a practical point of view. Forty-eight researchers from many di?erent countries and many di?erent disciplines gathered in the castle of Dagstuhl to exchange views and ideas, in a relaxed atmosphere. The program consisted of 35 talks of 30 minutes each, and of three evening sessions with additional presentations and discussions. There were also lively discussions about di?erent theoretical models and practical - proaches for reliable real number computations.
Download or read book Software Engineering Artificial Intelligence Networking and Parallel Distributed Computing 2011 written by Roger Lee and published by Springer. This book was released on 2011-06-12 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of the 12th Conference Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing (SNPD 2011) held on July 6-8, 2011 in Sydney, Australia was to bring together scientists, engineers, computer users, and students to share their experiences and exchange new ideas and research results about all aspects (theory, applications and tools) of computer and information sciences, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them. The conference organizers selected 14 outstanding papers from SNPD 2011, all of which you will find in this volume of Springer’s Studies in Computational Intelligence.
Download or read book Software Engineering for Science written by Jeffrey C. Carver and published by CRC Press. This book was released on 2016-11-03 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software Engineering for Science provides an in-depth collection of peer-reviewed chapters that describe experiences with applying software engineering practices to the development of scientific software. It provides a better understanding of how software engineering is and should be practiced, and which software engineering practices are effective for scientific software. The book starts with a detailed overview of the Scientific Software Lifecycle, and a general overview of the scientific software development process. It highlights key issues commonly arising during scientific software development, as well as solutions to these problems. The second part of the book provides examples of the use of testing in scientific software development, including key issues and challenges. The chapters then describe solutions and case studies aimed at applying testing to scientific software development efforts. The final part of the book provides examples of applying software engineering techniques to scientific software, including not only computational modeling, but also software for data management and analysis. The authors describe their experiences and lessons learned from developing complex scientific software in different domains. About the Editors Jeffrey Carver is an Associate Professor in the Department of Computer Science at the University of Alabama. He is one of the primary organizers of the workshop series on Software Engineering for Science (http://www.SE4Science.org/workshops). Neil P. Chue Hong is Director of the Software Sustainability Institute at the University of Edinburgh. His research interests include barriers and incentives in research software ecosystems and the role of software as a research object. George K. Thiruvathukal is Professor of Computer Science at Loyola University Chicago and Visiting Faculty at Argonne National Laboratory. His current research is focused on software metrics in open source mathematical and scientific software.
Download or read book Solving Fault Diagnosis Problems written by Andreas Varga and published by Springer. This book was released on 2017-02-14 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses fault detection and isolation topics from a computational perspective. Unlike most existing literature, it bridges the gap between the existing well-developed theoretical results and the realm of reliable computational synthesis procedures. The model-based approach to fault detection and diagnosis has been the subject of ongoing research for the past few decades. While the theoretical aspects of fault diagnosis on the basis of linear models are well understood, most of the computational methods proposed for the synthesis of fault detection and isolation filters are not satisfactory from a numerical standpoint. Several features make this book unique in the fault detection literature: Solution of standard synthesis problems in the most general setting, for both continuous- and discrete-time systems, regardless of whether they are proper or not; consequently, the proposed synthesis procedures can solve a specific problem whenever a solution exists Emphasis on the best numerical algorithms to solve the synthesis problems for linear systems in generalized state-space form (also known as descriptor systems) Development of general synthesis procedures relying on new computational paradigms, such as factorization-based design based on filter updating techniques and nullspace-based synthesis Availability of a comprehensive set of free accompanying software tools for descriptor systems, which allows readers to easily implement all synthesis procedures presented in the book and ensures that all results are reproducible This book is primarily intended for researchers and advanced graduate students in the areas of fault diagnosis and fault-tolerant control. It will also appeal to mathematicians with an interest in control-oriented numerics.
Download or read book Analysis and Synthesis of Singular Systems with Time Delays written by Zheng-Guang Wu and published by Springer. This book was released on 2013-04-10 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Singular time-delay systems are very suitable to describe a lot of practical systems such as manufacturing systems, networked control systems, power systems and electrical circuits. Thus, the past two decades have witnessed a significant progress on the theory of singular time-delay systems, and many fundamental and important topics have been successfully investigated including stability analysis, stabilization, guaranteed cost control, filtering, observer design, sliding mode control and so on. The main objective of this book is to present the latest developments and references in the analysis and synthesis of singular time-delay systems with or without Markov jumping parameters in a unified framework. The materials adopted in this book are mainly based on research results of the authors. This book will be of interest to academic researchers working in singular systems, time-delay systems and Markov jump systems and to graduate students interested in systems and control theory.
Download or read book Progress in Industrial Mathematics at ECMI 2008 written by Alistair D. Fitt and published by Springer Science & Business Media. This book was released on 2010-07-23 with total page 1060 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 15th European Conference on Mathematics for Industry was held in the agreeable surroundings of University College London, just 5 minutes walk from the British Museum in the heart of London, over the ?ve warm, sunny days from 30 June to 4 July 2008. Participants from all over the world met with the commonaimofreinforcingthe roleofmathematics asanoverarching resource for industry and business. The conference attracted over 300 participants from 30 countries, most of them participating with either a contributed talk, a minisymposium pres- tation or a plenary lecture. ‘Mathematics in Industry’ was interpreted in its widest sense as can be seen from the range of applications and techniques described in this volume. We mention just two examples. The Alan Tayler Lecture was given by Mario Primicerio on a problem arising from moving oil through pipelines when temperature variations a?ect the shearing properties of wax and thus modify the ?ow. The Wacker Prize winner, Master’s student Lauri Harhanen from the Helsinki University of Technology, showed how a novel piece of mathematics allowed new software to capture real-time images of teeth from the data supplied by present day dental machinery (see ECMI Newsletter 44). The meeting was attended by leading ?gures from government, bu- ness and science who all shared the same aim – to promote the application of innovative mathematics to industry, and identify industrial sectors that o?er the most exciting opportunities for mathematicians to provide new insight and new ideas.
Download or read book Quality of Numerical Software written by Ronald F. Boisvert and published by Springer. This book was released on 2016-01-09 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical software is central to our computerized society. It is used to control aeroplanes and bridges, operate manufacturing lines, control power plants and refineries, and analyse financial markets. Such software must be accurate, reliable, robust, efficient, easy to use, maintainable and adaptable. Quality assessment and control of numerical software is still not well understood. Although measurement is a key element, it remains difficult to assess many components of software quality and to evaluate the trade-offs between them. Fortunately, as numerical software is built upon a long established foundation of mathematical and computational knowledge, there is great potential for dramatic breakthroughs. This volume will address enabling techniques and tools such as benchmarks, testing methodologies, quality standards, metrics, and accuracy control mechanisms, and their application to software for differential equations, linear algebra, data analysis, as well as the evaluation of integrals, derivatives and elementary and special functions.
Download or read book Advances in Software Tools for Scientific Computing written by Hans P. Langtangen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: To make full use of the ever increasing hardware capabilities of modern com puters, it is necessary to speedily enhance the performance and reliability of the software as well, and often without having a suitable mathematical theory readily available. In the handling of more and more complex real-life numerical problems in all sorts of applications, a modern object-oriented de sign and implementation of software tools has become a crucial component. The considerable challenges posed by the demand for efficient object-oriented software in all areas of scientific computing make it necessary to exchange ideas and experiences from as many different sources as possible. Motivated by the success of the first meeting of this kind in Norway in 1996, we decided to organize another International Workshop on Modern Software Tools for Scientific Computing, often referred to as SciTools'98. This workshop took place in Oslo, Norway, September 14-16, 1998. The ob jective was again to provide an open forum for exchange and discussion of modern, state-of-the-art software techniques applied to challenging numerical problems. The organization was undertaken jointly by the research institute SINTEF Applied Mathematics, the Departments of Mathematics and Infor matics at the University of Oslo, and the company Numerical Objects AS.
Download or read book Mathematical Software written by John R. Rice and published by Academic Press. This book was released on 2014-05-27 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Software deals with software designed for mathematical applications such as Fortran, CADRE, SQUARS, and DESUB. The distribution and sources of mathematical software are discussed, along with number representation and significance monitoring. User-modifiable software and non-standard arithmetic programs are also considered. Comprised of nine chapters, this volume begins with a historical background in the form of a chronological list of events that trace the development of computing in general and mathematical software in particular. The next chapter examines where and how mathematical software is being created and how it is being disseminated to eventual consumers. A number of important shortcomings are identified. The future of mathematical software and the challenges facing mathematical software are then discussed. Subsequent chapters focus on the point of view of people outside the professional community of mathematical software; the monitoring of significance in computation and its relation to number representation; libraries of mathematical software; and the automation of numerical analysis. Eleven algorithms for numerical quadrature are also compared. This book should be of considerable interest to students and specialists in the fields of mathematics and computer science.
Download or read book Software Verification written by Roderick Bloem and published by Springer Nature. This book was released on 2022-02-21 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 13th International Conference on Verified Software, VSTTE 2021, and the 14th International Workshop on Numerical Software Verification, NSV 2021, held online, in July/ October 2021. Due to COVID-19 pandemic the conference was held virtually. There were 10 papers presented in this volume were carefully reviewed and selected from 20 submissions. The papers focuses on challenges of the verification of cyber-physical systems with machine learning components and making large-scale verified software a practical reality and much more.