Download or read book Crystal Growth Technology written by Hans J. Scheel and published by John Wiley & Sons. This book was released on 2009-07-31 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume deals with the technologies of crystal fabrication, of crystal machining, and of epilayer production and is the first book on industrial and scientific aspects of crystal and layer production. The major industrial crystals are treated: Si, GaAs, GaP, InP, CdTe, sapphire, oxide and halide scintillator crystals, crystals for optical, piezoelectric and microwave applications and more. Contains 29 contributions from leading crystal technologists covering the following topics: * General aspects of crystal growth technology * Silicon * Compound semiconductors * Oxides and halides * Crystal machining * Epitaxy and layer deposition Scientific and technological problems of production and machining of industrial crystals are discussed by top experts, most of them from the major growth industries and crystal growth centers. In addition, it will be useful for the users of crystals, for teachers and graduate students in materials sciences, in electronic and other functional materials, chemical and metallurgical engineering, micro-and optoelectronics including nanotechnology, mechanical engineering and precision-machining, microtechnology, and in solid-state sciences.
Download or read book Single Crystal Growth of Semiconductors from Metallic Solutions written by Sadik Dost and published by Elsevier. This book was released on 2006-11-17 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Single Crystal Growth of Semiconductors from Metallic Solutions covers the four principal growth techniques currently in use for the growth of semiconductor single crystals from metallic solutions. Providing an in-depth review of the state-of-the-art of each, both experimentally and by numerical simulations. The importance of a close interaction between the numerical and experimental aspects of the processes is also emphasized. Advances in the fields of electronics and opto-electronics are hampered by the limited number of substrate materials which can be readily produced by melt-growth techniques such as the Czochralski and Bridgman methods. This can be alleviated by the use of alternative growth techniques, and in particular, growth from metallic solutions. The principal techniques currently in use are: Liquid Phase Epitaxy; Liquid Phase Electroepitaxy; the Travelling Heater Method, and; Liquid Phase Diffusion. Single Crystal Growth of Semiconductors from Metallic Solutions will serve as a valuable reference tool for researchers, and graduate and senior undergraduate students in the field of crystal growth. It covers most of the models developed in recent years. The detailed development of basic and constitutive equations and the associated interface and boundary conditions given for each technique will be very valuable to researchers for the development of their new models.* Describes the fundamentals of crystal growth modelling* Providing a state-of-the art description of the mathematical and experimental growth processes * Allows reader to gain clear insight into the practical and mathematical aspects of the topic
Download or read book Numerical Simulations of Crystal Growth written by Bayard K. Johnson and published by . This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Simulations of Czochralski Growth of Single Crystals written by Qiang Xiao (author) and published by . This book was released on 1994 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Flow Simulation III written by Ernst Heinrich Hirschel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains eighteen reports on work, which is conducted since 2000 in the Collaborative Research Programme 'Numerical Flow Simulation' of the Centre National de la Recherche Scientifique (CNRS) and the Deutsche Forschungsgemeinschaft (DFG). French and German engineers and mathematicians present their joint research on the topics 'Development of Solution Techniques', 'Crystal Growth and Melts', 'Flows of Reacting Gases, Sound Generation' and 'Turbulent Flows'. In the background of their work is the still strong growth of the performance of super-computer architectures, which, together with large advances in algorithms, is opening vast new application areas of numerical flow simulation in research and industrial work. Results of this programme from the period 1996 to 1998 have been presented in NNFM 66 (1998), and NNFM75 (2001).
Download or read book 2019 20 MATRIX Annals written by Jan de Gier and published by Springer Nature. This book was released on 2021-02-10 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: MATRIX is Australia’s international and residential mathematical research institute. It facilitates new collaborations and mathematical advances through intensive residential research programs, each 1-4 weeks in duration. This book is a scientific record of the ten programs held at MATRIX in 2019 and the two programs held in January 2020: · Topology of Manifolds: Interactions Between High and Low Dimensions · Australian-German Workshop on Differential Geometry in the Large · Aperiodic Order meets Number Theory · Ergodic Theory, Diophantine Approximation and Related Topics · Influencing Public Health Policy with Data-informed Mathematical Models of Infectious Diseases · International Workshop on Spatial Statistics · Mathematics of Physiological Rhythms · Conservation Laws, Interfaces and Mixing · Structural Graph Theory Downunder · Tropical Geometry and Mirror Symmetry · Early Career Researchers Workshop on Geometric Analysis and PDEs · Harmonic Analysis and Dispersive PDEs: Problems and Progress The articles are grouped into peer-reviewed contributions and other contributions. The peer-reviewed articles present original results or reviews on a topic related to the MATRIX program; the remaining contributions are predominantly lecture notes or short articles based on talks or activities at MATRIX.
Download or read book Technology of Gallium Nitride Crystal Growth written by Dirk Ehrentraut and published by Springer Science & Business Media. This book was released on 2010-06-14 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the important technological aspects of the growth of GaN single crystals by HVPE, MOCVD, ammonothermal and flux methods for the purpose of free-standing GaN wafer production.
Download or read book Crystal Growth Processes Based on Capillarity written by Thierry Duffar and published by John Wiley & Sons. This book was released on 2010-03-30 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystal Growth Processes Based on Capillarity closely examines crystal growth technologies, like Czochralski, Floating zone, and Bridgman. The up-to-date reference contains detailed technical and applied information, especially on the difficulty of crystal shape control. Including practical examples and software applications, this book provides both theoretical and experimental sections. Edited by a well-respected academic with over twenty-five years of experience in this field, the text is an excellent resource for professionals in crystal growth as well as for students in understanding the fundamentals and the technology of crystal growth.
Download or read book Statistical Physics of Crystal Growth written by Yukio Saito and published by World Scientific. This book was released on 1996 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a systematic overview on the scientific fundamentals of crystal growth from the classical phenomenological description to the recent theoretical contributions of statistical physics such as studies on surface roughening and on the pattern formation in the diffusion-limited growth.The book emphasizes physical concepts as well as mathematical details, and is intended to serve as lecture notes for postgraduate courses.
Download or read book Crystal Growth From Fundamentals to Technology written by Georg Müller and published by Elsevier. This book was released on 2004-07-07 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains 5 chapters with 19 contributions form internationally well acknowledged experts in various fields of crystal growth. The topics are ranging from fundamentals (thermodynamic of epitaxy growth, kinetics, morphology, modeling) to new crystal materials (carbon nanocrystals and nanotubes, biological crystals), to technology (Silicon Czochralski growth, oxide growth, III-IV epitaxy) and characterization (point defects, X-ray imaging, in-situ STM). It covers the treatment of bulk growth as well as epitaxy by anorganic and organic materials.
Download or read book Dynamics of Curved Fronts written by Pierre Pelce and published by Academic Press. This book was released on 1988-11-28 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, much progress has been made in the understanding of interface dynamics of various systems: hydrodynamics, crystal growth, chemical reactions, and combustion. Dynamics of Curved Fronts is an important contribution to this field and will be an indispensable reference work for researchers and graduate students in physics, applied mathematics, and chemical engineering. The book consist of a 100 page introduction by the editor and 33 seminal articles from various disciplines.
Download or read book Computational Science ICCS 2003 Part 1 written by Peter Sloot and published by Springer Science & Business Media. This book was released on 2003-05-22 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: The four-volume set LNCS 2657, LNCS 2658, LNCS 2659, and LNCS 2660 constitutes the refereed proceedings of the Third International Conference on Computational Science, ICCS 2003, held concurrently in Melbourne, Australia and in St. Petersburg, Russia in June 2003. The four volumes present more than 460 reviewed contributed and invited papers and span the whole range of computational science, from foundational issues in computer science and algorithmic mathematics to advanced applications in virtually all application fields making use of computational techniques. These proceedings give a unique account of recent results in the field.
Download or read book International School on Crystal Growth of Technologically Important Electronic Materials written by K. Byrappa and published by Allied Publishers. This book was released on 2003 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Photovoltaic Science and Engineering written by Antonio Luque and published by John Wiley & Sons. This book was released on 2011-03-29 with total page 1172 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most comprehensive, authoritative and widely cited reference on photovoltaic solar energy Fully revised and updated, the Handbook of Photovoltaic Science and Engineering, Second Edition incorporates the substantial technological advances and research developments in photovoltaics since its previous release. All topics relating to the photovoltaic (PV) industry are discussed with contributions by distinguished international experts in the field. Significant new coverage includes: three completely new chapters and six chapters with new authors device structures, processing, and manufacturing options for the three major thin film PV technologies high performance approaches for multijunction, concentrator, and space applications new types of organic polymer and dye-sensitized solar cells economic analysis of various policy options to stimulate PV growth including effect of public and private investment Detailed treatment covers: scientific basis of the photovoltaic effect and solar cell operation the production of solar silicon and of silicon-based solar cells and modules how choice of semiconductor materials and their production influence costs and performance making measurements on solar cells and modules and how to relate results under standardised test conditions to real outdoor performance photovoltaic system installation and operation of components such as inverters and batteries. architectural applications of building-integrated PV Each chapter is structured to be partially accessible to beginners while providing detailed information of the physics and technology for experts. Encompassing a review of past work and the fundamentals in solar electric science, this is a leading reference and invaluable resource for all practitioners, consultants, researchers and students in the PV industry.
Download or read book Engineering Turbulence Modelling and Experiments 5 written by W. Rodi and published by Elsevier. This book was released on 2002-08-21 with total page 1029 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence is one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends increasingly on the performance of the turbulence models. This series of symposia provides a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. The papers in this set of proceedings were presented at the 5th International Symposium on Engineering Turbulence Modelling and Measurements in September 2002. They look at a variety of areas, including: Turbulence modelling; Direct and large-eddy simulations; Applications of turbulence models; Experimental studies; Transition; Turbulence control; Aerodynamic flow; Aero-acoustics; Turbomachinery flows; Heat transfer; Combustion systems; Two-phase flows. These papers are preceded by a section containing 6 invited papers covering various aspects of turbulence modelling and simulation as well as their practical application, combustion modelling and particle-image velocimetry.
Download or read book Manufacturing Techniques for Materials written by T.S. Srivatsan and published by CRC Press. This book was released on 2018-04-09 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.
Download or read book High Performance Computing in Science and Engineering 99 written by E. Krause and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains reports about the most significant projects from science and engineering of the Federal High Performance Computing Center Stuttgart (HLRS). They were carefully selected in a peer-review process and are showcases of an innovative combination of state-of-the-art modeling, novel algorithms and the use of leading-edge parallel computer technology. The projects of HLRS are using supercomputer systems operated jointly by university and industry and therefore a special emphasis has been put on the industrial relevance of results and methods.
