Download or read book Direct Numerical Simulations of Gas Liquid Multiphase Flows written by Grétar Tryggvason and published by Cambridge University Press. This book was released on 2011-03-10 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accurately predicting the behaviour of multiphase flows is a problem of immense industrial and scientific interest. Modern computers can now study the dynamics in great detail and these simulations yield unprecedented insight. This book provides a comprehensive introduction to direct numerical simulations of multiphase flows for researchers and graduate students. After a brief overview of the context and history the authors review the governing equations. A particular emphasis is placed on the 'one-fluid' formulation where a single set of equations is used to describe the entire flow field and interface terms are included as singularity distributions. Several applications are discussed, showing how direct numerical simulations have helped researchers advance both our understanding and our ability to make predictions. The final chapter gives an overview of recent studies of flows with relatively complex physics, such as mass transfer and chemical reactions, solidification and boiling, and includes extensive references to current work.

Download or read book Numerical Methods and Simulations of Complex Multiphase Flows written by Peter Brady (Ph.D.) and published by . This book was released on 2011 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase flows are an important part of many natural and technological phenomena such as ocean-air coupling (which is important for climate modeling) and the atomization of liquid fuel jets in combustion engines. The unique challenges of multiphase flow often make analytical solutions to the governing equations impossible and experimental investigations very difficult. Thus, high-fidelity numerical simulations can play a pivotal role in understanding these systems. This dissertation describes numerical methods developed for complex multiphase flows and the simulations performed using these methods. First, the issue of multiphase code verification is addressed. Code verification answers the question "Is this code solving the equations correctly?" The method of manufactured solutions (MMS) is a procedure for generating exact benchmark solutions which can test the most general capabilities of a code. The chief obstacle to applying MMS to multiphase flow lies in the discontinuous nature of the material properties at the interface. An extension of the MMS procedure to multiphase flow is presented, using an adaptive marching tetrahedron style algorithm to compute the source terms near the interface. Guidelines for the use of the MMS to help locate coding mistakes are also detailed. Three multiphase systems are then investigated: (1) the thermocapillary motion of three-dimensional and axisymmetric drops in a confined apparatus, (2) the flow of two immiscible fluids completely filling an enclosed cylinder and driven by the rotation of the bottom endwall, and (3) the atomization of a single drop subjected to a high shear turbulent flow. The systems are simulated numerically by solving the full multiphase Navier-Stokes equations coupled to the various equations of state and a level set interface tracking scheme based on the refined level set grid method. The codes have been parallelized using MPI in order to take advantage of today's very large parallel computational architectures. In the first system, the code's ability to handle surface tension and large temperature gradients is established. In the second system, the code's ability to simulate simple interface geometries with strong shear is demonstrated. In the third system, the ability to handle extremely complex geometries and topology changes with strong shear is shown.

Download or read book Numerical Simulations of Complex Multiphase Flows written by Judy Hweina Che and published by . This book was released on 1999 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Simulation of Complex and Multiphase Flows written by and published by . This book was released on 2006 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Simulation of Multiphase Reactors with Continuous Liquid written by Chao Yang and published by Academic Press. This book was released on 2014-06-13 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical simulation of multiphase reactors with continuous liquid phase provides current research and findings in multiphase problems, which will assist researchers and engineers to advance this field. This is an ideal reference book for readers who are interested in design and scale-up of multiphase reactors and crystallizers, and using mathematical model and numerical simulation as tools. Yang and Mao's book focuses on modeling and numerical applications directly in the chemical, petrochemical, and hydrometallurgical industries, rather than theories of multiphase flow. The content will help you to solve reacting flow problems and/or system design/optimization problems. The fundamentals and principles of flow and mass transfer in multiphase reactors with continuous liquid phase are covered, which will aid the reader's understanding of multiphase reaction engineering. Provides practical applications for using multiphase stirred tanks, reactors, and microreactors, with detailed explanation of investigation methods. Presents the most recent research efforts in this highly active field on multiphase reactors and crystallizers. Covers mathematical models, numerical methods and experimental techniques for multiphase flow and mass transfer in reactors and crystallizers.

Download or read book Computational Experimental Methods in Multiphase Complex Flow IX written by P. Vorobieff and published by WIT Press. This book was released on 2017-10-11 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 9th book from this successful conference series, on Computational & Experimental Methods in Multiphase & Complex Flow, presents the latest research in one of the most challenging, yet most universally applicable areas of technology. Multiphase flows are found in all areas of technology and the range of related problems of interest is vast, including astrophysics, biology, geophysics, atmospheric process, and many areas of engineering. Recently multiphase fluid dynamics have generated a great deal of attention, leading to many notable advances in experimental, analytical and numerical studies. It is perhaps, however, work on numerical solutions which is the most noticeable owing to the continuing improvements in computer software tools. Progress in numerical methods has permitted the solution of many practical problems, helping to improve our understanding of the physics involved. The presented papers illustrate the close interaction between numerical modellers and researchers working to gradually resolve the many outstanding issues in our understanding of multiphase flow. They cover such topics as: Multiphase flow simulation; Bubble and drop dynamics; Interface behaviour; Experimental measurements; Energy applications; Compressible flows; Flow in porous media; Turbulent flow; Image processing; Heat transfer; Atomization; Hydromagnetics; Plasma; Fluidised beds; Cavitation; Multiphase chemical reactions.

Download or read book Numerical Methods for the Simulation of Multi phase and Complex Flow written by T. M. M. Verheggen and published by Lecture Notes in Control and I. This book was released on 1992 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nine review articles contained here introduce the techniques required touse lattice gas methods for numerical simulations of complex flows. Furthermore, lattice Boltzmann models are studied together with classical numerical techniques. The editors have written an extensive introductionto this exciting new approach to solving practical problems in modelling andsimulating flows. The book addresses numerical analysts and engineers in fluid mechanics, but also graduate students.

Download or read book Numerical Methods for the Simulation of Multi Phase and Complex Flow written by T.M.M. Verheggen and published by Springer. This book was released on 2014-10-09 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nine review articles contained here introduce the techniques required touse lattice gas methods for numerical simulations of complex flows. Furthermore, lattice Boltzmann models are studied together with classical numerical techniques. The editors have written an extensive introductionto this exciting new approach to solving practical problems in modelling andsimulating flows. The book addresses numerical analysts and engineers in fluid mechanics, but also graduate students.

Download or read book Multiphase reacting flows modelling and simulation written by Daniele L. Marchisio and published by Springer Science & Business Media. This book was released on 2007-10-16 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the most widely applicable modeling approaches. Chapters are organized in six groups covering from fundamentals to relevant applications. The book covers particle-based methods and also discusses Eulerian-Eulerian and Eulerian-Lagrangian techniques based on finite-volume schemes. Moreover, the possibility of modeling the poly-dispersity of the secondary phases in Eulerian-Eulerian schemes by solving the population balance equation is discussed.

Download or read book Introduction to Multiphase Flow written by George Yadigaroglu and published by Springer. This book was released on 2017-08-19 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the maiden volume in a new series devoted to lectures delivered through the annual seminars “Short Courses on Multiphase Flow,” held primarily at ETH Zurich continuously since 1984. The Zurich short courses, presented by prominent specialists in the various topics covered, have attracted a very large number of participants. This series presents fully updated and when necessary re-grouped lectures in a number of topical volumes. The collection aims at giving a condensed, critical and up-to-date view of basic knowledge on multiphase flows in relation to systems and phenomena encountered in industrial applications. The present volume covers the background of Multiphase Flows (MPF) that introduces the reader to the particular nature and complexity of multiphase flows and to basic but critical aspects of MPFs including concepts and the definition of the quantities of interest, an introduction to modelling strategies for MPFs, flow regimes, flow regime maps and tr ansition criteria. It also deals with the ubiquitous needs of the multiphase-flow modeller, namely pressure drop and phase distribution, i.e., the void fraction and the topology of the phases that determines the flow regimes.

Download or read book Direct Numerical Simulations of Gas liquid Multiphase Flows written by Grétar Tryggvason and published by . This book was released on 2011 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to direct numerical simulations of multiphase flows for researchers and graduate students in various fields.

Download or read book Computational Methods in Multiphase Flow VII written by C. A. Brebbia and published by WIT Press. This book was released on 2013-07-03 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase flows are found in all areas of technology, at all length scales and flow regimes and can involve compressible or incompressible linear or nonlinear, fluids. However, although they are ubiquitous, multiphase flows continue to be one of the most challenging areas of computational mechanics, with numerous problems as yet unsolved. Advanced computational and experimental methods are often required to solve the equations that describe such complex problems. The many challenges that must be faced in solving them include modelling nonlinear fluids, modelling and tracking interfaces, dealing with multiple length scales, characterising phase structures, and treating drop break-up and coalescence. It is important to validate models, which calls for the use of expensive and difficult experimental techniques.This book presents contributions on the latest research in the techniques for solving multiphase flow problems, presented at the seventh in a biennial series of conferences on the subject that began in 2001. Featured topics include: Flow in porous media; Turbulent flow; Multiphase flow simulation; Image processing; Heat transfer; Atomization; Interface behaviour; Oil and gas applications; Experimental measurements; Energy applications; Biological flows; Micro and macro fluids; Compressible flows.

Download or read book Computational Methods in Multiphase Flow VI written by Andrea Alberto Mammoli and published by WIT Press. This book was released on 2011 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase flows, which can involve compressible or incompressible linear or nonlinear, fluids, Are found in all areas of technology, at all length scales and flow regimes. In spite of their ubiquitousness, however multiphase flow continues to be one of the most challenging areas of computational mechanics and experimental methods, with numerous problems remaining unsolved to date. Because the multiphase flow problems are so complex, advanced computational and experimental methods are often required to solve the equations that describe them. The many hhallenges include modelling nonlinear fluids, modelling and tracking interfaces, dealing with multiple length scales, characterizing phase structures, and treating drop breakup and coalescence. Models must be validated, which requires the use of expensive and difficult experimental techniquess. This book presents contributions on the latest research in these techniques, presented at the sixth in a biennial series of conferences on the subject that begain in 2001. Featured topics include: Bubble and drop dynamics, Flow in porous media, Turbulent flow, Multiphase flow simulation, Image processing, Heat transfer, Interaction of gases, liquids and solids, Interface behaviour, Small scale phenomena, Atomization processes, and Liquid film behaviour.

Download or read book Multiphase Flows with Droplets and Particles Third Edition written by Efstathios E. Michaelides and published by CRC Press. This book was released on 2022-12-30 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase Flows with Droplets and Particles provides an organized, pedagogical study of multiphase flows with particles and droplets. This revised edition presents new information on particle interactions, particle collisions, thermophoresis and Brownian movement, computational techniques and codes, and the treatment of irregularly shaped particles. An entire chapter is devoted to the flow of nanoparticles and applications of nanofluids. Features Discusses the modelling and analysis of nanoparticles. Covers all fundamental aspects of particle and droplet flows. Includes heat and mass transfer processes. Features new and updated sections throughout the text. Includes chapter exercises and a Solutions Manual for adopting instructors. Designed to complement a graduate course in multiphase flows, the book can also serve as a supplement in short courses for engineers or as a stand-alone reference for engineers and scientists who work in this area.

Download or read book Computational Methods in Multiphase Flow V written by Andrea Alberto Mammoli and published by WIT Press. This book was released on 2009 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Together with turbulence, multiphase flow remains one of the most challenging areas of computational mechanics and experimental methods and numerous problems remain unsolved to date. Multiphase flows are found in all areas of technology, at all length scales and flow regimes. The fluids involved can be compressible or incompressible, linear or nonlinear. Because of the complexity of the problems, it is often essential to utilize advanced computational and experimental methods to solve the complex equations that describe them. Challenges in these simulations include modelling and tracking interfaces, dealing with multiple length scales, modelling nonlinear fluids, treating drop breakup and coalescence, characterizing phase structures, and many others. Experimental techniques, although expensive and difficult to perform, are essential to validate models. This book contains papers presented at the Fifth International Conference on Computational Methods in Multiphase Flow, which are grouped into the following topics: Multiphase Flow Simulation; Interaction of Gas, Liquids and Solids; Turbulent Flow; Environmental Multiphase Flow; Bubble and Drop Dynamics; Flow in Porous Media; Heat Transfer; Image Processing; Interfacial Behaviour.

Download or read book Computational Techniques for Multiphase Flows written by Guan Heng Yeoh and published by Elsevier. This book was released on 2009-10-07 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed or multiphase flows of solid/liquid or solid/gas are commonly found in many industrial fields, and their behavior is complex and difficult to predict in many cases. The use of computational fluid dynamics (CFD) has emerged as a powerful tool for the understanding of fluid mechanics in multiphase reactors, which are widely used in the chemical, petroleum, mining, food, beverage and pharmaceutical industries. Computational Techniques for Multiphase Flows enables scientists and engineers to the undertand the basis and application of CFD in muliphase flow, explains how to use the technique, when to use it and how to interpret the results and apply them to improving aplications in process enginering and other multiphase application areas including the pumping, automotive and energy sectors. - Understandable guide to a complex subject - Important in many industries - Ideal for potential users of CFD

Download or read book Computational Methods in Multiphase Flow IV written by A.A. Mammoli and published by WIT Press. This book was released on 2007-05-11 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid Dynamics is one of the most important topics of applied mathematics and physics. Together with complex flows and turbulence, multiphase flows remains one of the most challenging areas of computational mechanics, and even seemingly simple problems remain unsolved to date. Multiphase flows are found in all areas of technology, at all length scales and flow regimes. The fluids involved can be compressible or incompressible, linear or nonlinear. Because of the complexity of the problem, it is often essential to utilize advanced computational and experimental methods to solve the complex equations that describe them. Challenges in these simulations include nonlinear fluids, treating drop breakup and coalescence, characterizing phase structures, and many others.This volume brings together work presented at the Fourth International Conference on Computational and Experimental Methods in Multiphase and Complex Flows. Featured topics include: Suspensions; Bubble and Drop Dynamics; Flow in Porous Media; Interfaces; Turbulent Flow; Injectors and Nozzles; Particle Image Velocimetry; Macroscale Constitutive Models; Large Eddy Simulation; Finite Volumes; Interface Tracking Methods; Biological Flows; Environmental Multiphase Flow; Phase Changes and Stochastic Modelling.