Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 32 (thesis year 1987) a total of 12,483 theses titles from 22 Canadian and 176 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 32 reports theses submitted in 1987, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Download or read book The Proceedings of the International Offshore and Polar Engineering Conference written by and published by . This book was released on 1991 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Papers Presented at the International Conference on Numerical and Hydraulic Modelling of Ports and Harbours written by and published by . This book was released on 1985 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Wave Run up on Beaches written by M. C. Shen and published by . This book was released on 1962 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: The motion of water on a uniformly sloping beach, just after a bore reaches the shore, is studied. The shllow-water equations are used to fomulate a singular hyperbolic problem, which is solved by the help of RIEMANN'S Method and of the trutural theory of quasilinear hyperbolic equations developed in gas dynmics. The shore line is found to advance suddenly with non-zero velocity and then to move up and down the beach with constant, negative acceleration. The solution s shown to contain limit lines indiating a rather unexpeted, secondary bore in the back-wsh. (Author).

Download or read book Water Wave Forces written by Lennart Rundgren and published by . This book was released on 1958 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Modeling of Water Waves written by Pengzhi Lin and published by CRC Press. This book was released on 2008-04-30 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling large-scale wave fields and their interaction with coastal and offshore structures has become much more feasible over the last two decades with increases in computer speeds. Wave modelling can be viewed as an extension of wave theory, a mature and widely published field, applied to practical engineering through the use of computer tools. Information about the various wave models which have been developed is often widely scattered in the literature, and consequently this is one of the first books devoted to wave models and their applications. At the core of the book is an introduction to various types of wave models. For each model, the theoretical assumptions, the application range, and the advantages and limitations are elaborated. The combined use of different wave models from large-scale to local-scale is highlighted with a detailed discussion of the application and matching of boundary conditions. At the same time the book provides a grounding in hydrodynamics, wave theory, and numerical methods which underlie wave modelling. It presents the theoretical background and also shows how to use these models for achieving different engineering tasks, illustrated and reinforced with case study examples.

Download or read book Coastal Engineering 2002 Solving Coastal Conundrums Proceedings Of The 28th International Conference In 3 Vols written by Jane Mckee Smith and published by World Scientific. This book was released on 2003-03-14 with total page 4007 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains more than 300 papers presented at the 28th International Conference on Coastal Engineering, held in Cardiff, Wales, in July 2002. It is divided into five parts: coastal waves; nearshore currents, swash, and long waves; coastal structures; sediment transport; and coastal morphology, beach nourishment, and coastal management. The papers cover a broad range of topics, including theory, numerical and physical modeling, field measurements, case studies, design, and management. Coastal Engineering 2002 provides engineers, scientists, and planners with state-of-the-art information on coastal engineering and coastal processes.

Download or read book Die K ste Archiv F r Forschung und Technik an Der Nord und Ostsee written by and published by . This book was released on 2007 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Seawalls and Breakwaters written by Ira Augustus Hunt and published by . This book was released on 1958 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Coastal Structures 2003 written by Jeffrey A. Melby and published by . This book was released on 2004 with total page 1420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection contains 110 papers presented at Coastal Structures 2003, held in Portland, Oregon, August 26-30, 2003.

Download or read book A Guide to Modeling Coastal Morphology written by Dano Roelvink and published by World Scientific. This book was released on 2012 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process-based morphodynamic modelling is one of the relatively new tools at the disposal of coastal scientists, engineers and managers. On paper, it offers the possibility to analyse morphological processes and to investigate the effects of various measures one might consider to alleviate some problems. For these to be applied in practice, a model should be relatively straightforward to set up. It should be accurate enough to represent the details of interest, it should run long enough and robustly to see the real effects happen, and the physical processes represented in such a way that the sediment generally goes in the right direction at the right rate. Next, practitioners must be able to judge if the patterns and outcomes of the model are realistic and finally, translate these colour pictures and vector plots to integrated parameters that are relevant to the client or end user. In a nutshell, this book provides an in-depth review of ways to model coastal processes, including many hands-on exercises.

Download or read book Proceedings of the Institution of Civil Engineers written by and published by . This book was released on 1994 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Numerical Method of Lines written by William E. Schiesser and published by Elsevier. This book was released on 2012-07-27 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book on the numerical method of lines, a relatively new method for solving partial differential equations. The Numerical Method of Lines is also the first book to accommodate all major classes of partial differential equations. This is essentially an applications book for computer scientists. The author will separately offer a disk of FORTRAN 77 programs with 250 specific applications, ranging from "Shuttle Launch Simulation" to "Temperature Control of a Nuclear Fuel Rod."

Download or read book Numerical Modeling of Tsunami Waves written by Juan J. Horrillo and published by World Scientific Publishing Company. This book was released on 2021-10-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This solutions manual is a companion to the workbook, Practical Numerical Mathematics with MATLAB: A workbook. It is intended for use by individual students independently studying the workbook and provides complete MATLAB code and numerical results for each of the exercises in the workbook and will be especially useful for those students without previous MATLAB programming experience. It is also valuable for classroom instructors to help pinpoint the author's intent in each exercise and to provide a model for graders.

Download or read book Marine Technology Society Journal written by Marine Technology Society and published by . This book was released on 1999 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Dock and Harbour Authority written by and published by . This book was released on 1991 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook Of Coastal And Ocean Engineering Expanded Edition In 2 Volumes written by Young C Kim and published by World Scientific. This book was released on 2017-12-21 with total page 1775 pages. Available in PDF, EPUB and Kindle. Book excerpt: The handbook contains a comprehensive compilation of topics that are at the forefront of many of the technical advances in ocean waves, coastal, and ocean engineering. More than 110 internationally recognized authorities in the field of coastal and ocean engineering have contributed articles in their areas of expertise to this handbook. These international luminaries are from highly respected universities and renowned research and consulting organizations around the world.