Download or read book Numerical Simulation of Unsteady Flows Transition to Turbulence and Combustion written by Olivier Pironneau and published by . This book was released on 1992 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Simulation of Unsteady Flows and Transition to Turbulence written by O. Pironneau and published by Cambridge University Press. This book was released on 1992-07-31 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The workshop concentrated on the following turbulence test cases: T1 Boundary layer in an S-shaped duct; T2 Periodic array of cylinders in a channel; T3 Transition in a boundary layer under the influence of free-stream turbulence; T4 & T5: Axisymmetric confined jet flows.
Download or read book Numerical Simulation of Unsteady Flows and Transition Turbulence written by Olivier Pironneau and published by . This book was released on 2008 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simulation of Turbulent Flows with and without Combustion with Emphasis on the Impact of Coherent Structures on the Turbulent Mixing written by Cunha Galeazzo, Flavio Cesar and published by KIT Scientific Publishing. This book was released on 2016-10-14 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The analysis of turbulent mixing in complex turbulent flows is a challenging task. The effective mixing of entrained fluids to a molecular level is a vital part of the dynamics of turbulent flows, especially when combustion is involved. The work has shown the limitations of the steady-state simulations and acknowledged the need of applying high-fidelity unsteady methods for the calculation of flows with pronounced unsteadiness promoted by large-scale coherent structures or other sources.
Download or read book Recent Results in Laminar Turbulent Transition written by Siegfried Wagner and published by Springer Science & Business Media. This book was released on 2004 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methodic investigations of laminar-turbulent transition in wall-bounded she ar flows under controlled conditions are essential for untangling the various complex phenomena of the transition process occurring in flows at practical conditions. They allow understanding of the instability processes of the la minar flow, and thus enable the development of tools for flow control. On the one hand the laminar flow regime can be extended by delaying transition to reduce viscous drag, and on the other hand large-scale flow disturbances or transition can be forced in order to enhance momentum and mass ex change. Thus flow separation can be prevented, or mixing of fuel and air in combustion engines enhanced, for instance. The "DFG Verbund-Schwerpunktprogramm Transition" - a cooperative priority research program of universities, research establishments and indu stry in Germany - has been launched in April 1996 with the aim to explore transition by a coordinated use, development and validation of advanced experimental techniques and theoretical/numerical simulation methods, bin ding together all the appropriate resources available in Germany. At the very beginning of the six-year research period specifically selected test problems were to be investigated by various theoretical and experimental methods to identify and possibly rule out inadequate numerical or experimental methods. With respect to experiments it was planned to use multi-sensor-surface measuring techniques, the infrared measuring technique, and particle image velocimetry (PlV) in addition to hot-wire techniques to get instantaneous images of flows in sections, on surfaces, or within the complete flow field.
Download or read book Engineering Turbulence Modelling and Experiments 5 written by W. Rodi and published by Elsevier. This book was released on 2002-08-21 with total page 1029 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence is one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends increasingly on the performance of the turbulence models. This series of symposia provides a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. The papers in this set of proceedings were presented at the 5th International Symposium on Engineering Turbulence Modelling and Measurements in September 2002. They look at a variety of areas, including: Turbulence modelling; Direct and large-eddy simulations; Applications of turbulence models; Experimental studies; Transition; Turbulence control; Aerodynamic flow; Aero-acoustics; Turbomachinery flows; Heat transfer; Combustion systems; Two-phase flows. These papers are preceded by a section containing 6 invited papers covering various aspects of turbulence modelling and simulation as well as their practical application, combustion modelling and particle-image velocimetry.
Download or read book Turbulent Combustion Modeling written by Tarek Echekki and published by Springer Science & Business Media. This book was released on 2010-12-25 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent combustion sits at the interface of two important nonlinear, multiscale phenomena: chemistry and turbulence. Its study is extremely timely in view of the need to develop new combustion technologies in order to address challenges associated with climate change, energy source uncertainty, and air pollution. Despite the fact that modeling of turbulent combustion is a subject that has been researched for a number of years, its complexity implies that key issues are still eluding, and a theoretical description that is accurate enough to make turbulent combustion models rigorous and quantitative for industrial use is still lacking. In this book, prominent experts review most of the available approaches in modeling turbulent combustion, with particular focus on the exploding increase in computational resources that has allowed the simulation of increasingly detailed phenomena. The relevant algorithms are presented, the theoretical methods are explained, and various application examples are given. The book is intended for a relatively broad audience, including seasoned researchers and graduate students in engineering, applied mathematics and computational science, engine designers and computational fluid dynamics (CFD) practitioners, scientists at funding agencies, and anyone wishing to understand the state-of-the-art and the future directions of this scientifically challenging and practically important field.
Download or read book Transition Turbulence and Combustion Modelling written by A. Hanifi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: This single-volume work gives an introduction to the fields of transition, turbulence, and combustion modeling of compressible flows and provides the physical background for today’s modeling approaches in these fields. It presents basic equations and discusses fundamental aspects of hydrodynamical instability.
Download or read book Modeling and Simulation of Turbulent Combustion written by Santanu De and published by Springer. This book was released on 2017-12-12 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review of state-of-the-art models for turbulent combustion, with special emphasis on the theory, development and applications of combustion models in practical combustion systems. It simplifies the complex multi-scale and nonlinear interaction between chemistry and turbulence to allow a broader audience to understand the modeling and numerical simulations of turbulent combustion, which remains at the forefront of research due to its industrial relevance. Further, the book provides a holistic view by covering a diverse range of basic and advanced topics—from the fundamentals of turbulence–chemistry interactions, role of high-performance computing in combustion simulations, and optimization and reduction techniques for chemical kinetics, to state-of-the-art modeling strategies for turbulent premixed and nonpremixed combustion and their applications in engineering contexts.
Download or read book Transition Turbulence and Combustion written by M.Y. Hussaini and published by Springer. This book was released on 1994 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: These two volumes are concerned with current technologically important issues of transition, turbulence and combustion. Topics covered in transition include linear and nonlinear stability, direct and large-eddy simulation and phenomenological modelling of the transition zone. In turbulence, interest was focused on second-order closures and the formulation of near-wall corrections to existing high Reynolds number models, and closure model development based on turbulent flow structures and RNG theory. Topics covered in combustion include counterflow diffusion flames, development of novel mixing enhancement techniques for non-premixed combustion, and methods of modelling the interaction between turbulence and chemical kinetics. This collection of papers from leading researchers represents as yet unpublished state-of-the-art research, resulting in a very valuable tool for scientists and students working in areas of turbulence, transition and combustion.
Download or read book Numerical Simulation of Unsteady Three dimensional Turbulent Structures in Boundary Layer Flows written by Nan-Suey Liu and published by . This book was released on 1985 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Simulation of Turbulent Flows and Noise Generation written by Christophe Brun and published by Springer. This book was released on 2009-08-29 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Large Eddy Simulation (LES) is a high-fidelity approach to the numerical simulation of turbulent flows. Recent developments have shown LES to be able to predict aerodynamic noise generation and propagation as well as the turbulent flow, by means of either a hybrid or a direct approach. This book is based on the results of two French/German research groups working on LES simulations in complex geometries and noise generation in turbulent flows. The results provide insights into modern prediction approaches for turbulent flows and noise generation mechanisms as well as their use for novel noise reduction concepts.
Download or read book Engineering Turbulence Modelling and Experiments 4 written by D. Laurence and published by Elsevier. This book was released on 1999-04-14 with total page 975 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain the papers presented at the 4th International Symposium on Engineering Turbulence Modelling and Measurements held at Ajaccio, Corsica, France from 24-26 May 1999. It follows three previous conferences on the topic of engineering turbulence modelling and measurements. The purpose of this series of symposia is to provide a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. Turbulence is still one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends more and more on the performance of the turbulence models. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation.
Download or read book Numerical Simulations of Turbulent Combustion written by Andrei Lipatnikov and published by Mdpi AG. This book was released on 2020-07 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent burning of gaseous fuels is widely used for energy conversion in stationary power generation, e.g., gas turbines, land transportation, piston engines, and aviation, and aero-engine afterburners. Nevertheless, our fundamental understanding of turbulent combustion is still limited, because it is a highly non-linear and multiscale process that involves various local phenomena and thousands (e.g., for gasoline-air mixtures) of chemical reactions between hundreds of species, including several reactions that control emissions from flames. Therefore, there is a strong need for elaborating high fidelity, advanced numerical models, and methods that will catch the governing physical mechanisms of flame-turbulence interaction and, consequently, will make turbulent combustion computations an efficient predictive tool for applied research and, in particular, for development of a new generation of ultra-clean and highly efficient internal combustion engines that will allow society to properly respond to current environmental and efficiency challenges. Accordingly, papers published in this Special Issue (i) contribute to our fundamental understanding of flame-turbulence interaction by analyzing results of unsteady multi-dimensional numerical simulations and (ii) develop and validate high-fidelity models and efficient numerical methods for computational fluid Dynamics research into turbulent combustion in laboratory burners and engines.
Download or read book Turbulence Modelling Approaches written by Konstantin Volkov and published by BoD – Books on Demand. This book was released on 2017-07-26 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accurate prediction of turbulent flows remains a challenging task despite considerable work in this area and the acceptance of CFD as a design tool. The quality of the CFD calculations of the flows in engineering applications strongly depends on the proper prediction of turbulence phenomena. Investigations of flow instability, heat transfer, skin friction, secondary flows, flow separation, and reattachment effects demand a reliable modelling and simulation of the turbulence, reliable methods, accurate programming, and robust working practices. The current scientific status of simulation of turbulent flows as well as some advances in computational techniques and practical applications of turbulence research is reviewed and considered in the book.
Download or read book Numerocal Simulation of Unsteady Flows and Transition to Turbulence written by Olivier Pironneau and published by . This book was released on 1992 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Workshop on Engineering Turbulence Modeling written by and published by . This book was released on 1992 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
