Download or read book Gas Turbine Blade Cooling written by Chaitanya D Ghodke and published by SAE International. This book was released on 2018-12-10 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas turbines play an extremely important role in fulfilling a variety of power needs and are mainly used for power generation and propulsion applications. The performance and efficiency of gas turbine engines are to a large extent dependent on turbine rotor inlet temperatures: typically, the hotter the better. In gas turbines, the combustion temperature and the fuel efficiency are limited by the heat transfer properties of the turbine blades. However, in pushing the limits of hot gas temperatures while preventing the melting of blade components in high-pressure turbines, the use of effective cooling technologies is critical. Increasing the turbine inlet temperature also increases heat transferred to the turbine blade, and it is possible that the operating temperature could reach far above permissible metal temperature. In such cases, insufficient cooling of turbine blades results in excessive thermal stress on the blades causing premature blade failure. This may bring hazards to the engine's safe operation. Gas Turbine Blade Cooling, edited by Dr. Chaitanya D. Ghodke, offers 10 handpicked SAE International's technical papers, which identify key aspects of turbine blade cooling and help readers understand how this process can improve the performance of turbine hardware.

Download or read book Proceedings of the 26th National Conference on Fluid Mechanics and Fluid Power written by B. Maiti and published by Allied Publishers. This book was released on 1999 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Research Abstracts written by and published by . This book was released on 1988 with total page 1344 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Paper written by and published by . This book was released on 2001 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Elements of Transitional Boundary Layer Flowlements written by Robert Edward Mayle and published by Logos Verlag Berlin GmbH. This book was released on 2018 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Second Enhanced Edition Suitable for advanced-level courses or an independent study in fluid mechanics, this text by an expert in the field provides the basic aspects of laminar-to-turbulent flow transition in boundary layers. Logically organized into three major parts, the book covers pre- and post-transitional flow, transitional flow, and several advanced topics in periodically disturbed transitional flow. Some of the subjects covered within the book include high-frequency unsteady laminar flow, turbulent flow, natural transition, bypass transition, turbulent spot theory, turbulent spot kinematics and production, correlations for the onset and rate of transition, global and conditional averaging, transitional flow models, wakeinduced transition, multimode transition, and separated-flow transition. Containing some 202 figures (all drawn by the author), 28 tables, 12 appendices, a supplement on tensors, and an extensive bibliography, the 415 page book provides a wealth of data and information about the subject.

Download or read book International Conference of Computational Methods in Sciences and Engineering ICCMSE 2004 written by Theodore Simos and published by CRC Press. This book was released on 2019-04-29 with total page 1192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference of Computational Methods in Sciences and Engineering (ICCMSE) is unique in its kind. It regroups original contributions from all fields of the traditional Sciences, Mathematics, Physics, Chemistry, Biology, Medicine and all branches of Engineering. The aim of the conference is to bring together computational scientists from several disciplines in order to share methods and ideas. More than 370 extended abstracts have been submitted for consideration for presentation in ICCMSE 2004. From these, 289 extended abstracts have been selected after international peer review by at least two independent reviewers.

Download or read book Gas Turbine Heat Transfer and Cooling Technology Second Edition written by Je-Chin Han and published by CRC Press. This book was released on 2012-11-27 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference for engineers and researchers, Gas Turbine Heat Transfer and Cooling Technology, Second Edition has been completely revised and updated to reflect advances in the field made during the past ten years. The second edition retains the format that made the first edition so popular and adds new information mainly based on selected published papers in the open literature. See What’s New in the Second Edition: State-of-the-art cooling technologies such as advanced turbine blade film cooling and internal cooling Modern experimental methods for gas turbine heat transfer and cooling research Advanced computational models for gas turbine heat transfer and cooling performance predictions Suggestions for future research in this critical technology The book discusses the need for turbine cooling, gas turbine heat-transfer problems, and cooling methodology and covers turbine rotor and stator heat-transfer issues, including endwall and blade tip regions under engine conditions, as well as under simulated engine conditions. It then examines turbine rotor and stator blade film cooling and discusses the unsteady high free-stream turbulence effect on simulated cascade airfoils. From here, the book explores impingement cooling, rib-turbulent cooling, pin-fin cooling, and compound and new cooling techniques. It also highlights the effect of rotation on rotor coolant passage heat transfer. Coverage of experimental methods includes heat-transfer and mass-transfer techniques, liquid crystal thermography, optical techniques, as well as flow and thermal measurement techniques. The book concludes with discussions of governing equations and turbulence models and their applications for predicting turbine blade heat transfer and film cooling, and turbine blade internal cooling.

Download or read book Institute for Computational Mechanics in Propulsion Seventh Annual Report 1992 written by Charles E. Feiler and published by . This book was released on 1993 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ASME Technical Papers written by and published by . This book was released on 2001 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Challenges of Power Engineering and Environment written by Ke-fa Cen and published by Springer Science & Business Media. This book was released on 2009-03-27 with total page 1432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the proceedings of the International Conference on Power Engineering-2007. The fields of this book include power engineering and relevant environmental issues. The recent technological advances in power engineering and related areas are introduced. This book is valuable for researchers, engineers and students majoring in power engineering.

Download or read book Proceedings Of The International Heat Transfer Conference written by Lee and published by CRC Press. This book was released on 1998-11-01 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: This year's set of papers includes 23 Keynote Papers and 537 refereed General Papers, in seven volumes. Experts from around the world have combined to address the leading edge of research and practical innovations in convection, combustion, heat exchangers, two-phase flow, and much more. Whether one is involved in mechanical, chemical, nuclear, or energy engineering the quantity, international scope, and high quality of the contents make access to these volumes essential.

Download or read book Impingement Jet Cooling in Gas Turbines written by R.S. Amano and published by WIT Press. This book was released on 2014-05-28 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the requirement for enhanced cooling technologies on modern gas turbine engines, advanced research and development has had to take place in field of thermal engineering. Among the gas turbine cooling technologies, impingement jet cooling is one of the most effective in terms of cooling effectiveness, manufacturability and cost. The chapters contained in this book describe research on state-of-the-art and advanced cooling technologies that have been developed, or that are being researched, with a variety of approaches from theoretical, experimental, and CFD studies. The authors of the chapters have been selected from some of the most active researchers and scientists on the subject. This is the first to book published on the topics of gas turbines and heat transfer to focus on impingement cooling alone.

Download or read book NASA Technical Memorandum written by and published by . This book was released on 1994 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Turbulence Models and Their Application written by Tuncer Cebeci and published by Springer Science & Business Media. This book was released on 2003-12-04 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a brief review of the more popular turbulence models, the author presents and discusses accurate and efficient numerical methods for solving the boundary-layer equations with turbulence models based on algebraic formulas (mixing length, eddy viscosity) or partial-differential transport equations. A computer program employing the Cebeci-Smith model and the k-e model for obtaining the solution of two-dimensional incompressible turbulent flows without separation is discussed in detail and is presented in the accompanying CD.