Download or read book IUTAM Symposium on Numerical Simulation of Non Isothermal Flow of Viscoelastic Liquids written by J.F. Dijksman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last decades a considerable effort has been made on the computation of the isothermal flow of viscoelastic fluids. In fact the activities related to this particular field of non-Newtonian fluid mechanics have focused on the following questions: which type of constitutive equation describes non-Newtonian fluid behaviour; how to measure fluid parameters; and what type of computational scheme leads to reliable, stable and cost-effective computer programs. During the same period, typical non-Newtonian fluid phenomena have been experimentally examined, such as the flow through a `four-to-one' contraction, the flow around a sphere or separation flow, providing fresh challenges for numerical modellers. Apart from momentum transport, however, fluid flow is strongly influenced by heat treansport in most real industrial operations in which non-Newtonian fluids are processed. The IUTAM Symposium on `Numerical Simulation of Nonisothermal Flow of Viscoelastic Liquids' held at Rolduc Abbey in Kerkrade, the Netherlands, November 1--3, 1993, was organised to monitor the state of affairs in regard to the influence of nonisothermal effects on the flow of a viscoelastic liquid. The present collection of papers gives an overview of what has been achieved so far. It is a milestone in the rapidly emerging and exciting new field in non-Newtonian fluid mechanics.
Download or read book Theoretical and Applied Rheology written by P. Moldenaers and published by Elsevier. This book was released on 2013-10-22 with total page 1110 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than 900 authors from over 35 countries contributed to the 1992 International Congress on Rheology. These proceedings volumes comprise 17 plenary and keynote papers, 250 oral contributions and some 200 poster presentations. All relevant aspects of rheology are covered, e.g., theoretical rheology, molecular theories, fluid mechanics, rheometry, experimental methods, foams, polymer solutions, polymer melts, rubber, solids, composites, biorheology, industrial rheology, polymer processing, food rheology and electrorheology, reflecting the development of rheology into a broad, multidisciplinary field of recognized academic and industrial relevance.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis of Transient Viscoelastic Flows Involving a Free Surface written by Douglas Wayne Bousfield and published by . This book was released on 1986 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Finite Element Method Set written by O. C. Zienkiewicz and published by Elsevier. This book was released on 2005-11-25 with total page 1863 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sixth editions of these seminal books deliver the most up to date and comprehensive reference yet on the finite element method for all engineers and mathematicians. Renowned for their scope, range and authority, the new editions have been significantly developed in terms of both contents and scope. Each book is now complete in its own right and provides self-contained reference; used together they provide a formidable resource covering the theory and the application of the universally used FEM. Written by the leading professors in their fields, the three books cover the basis of the method, its application to solid mechanics and to fluid dynamics.* This is THE classic finite element method set, by two the subject's leading authors * FEM is a constantly developing subject, and any professional or student of engineering involved in understanding the computational modelling of physical systems will inevitably use the techniques in these books * Fully up-to-date; ideal for teaching and reference
Download or read book Advances in the Flow and Rheology of Non Newtonian Fluids written by D.A. Siginer and published by Elsevier. This book was released on 1999-05-07 with total page 895 pages. Available in PDF, EPUB and Kindle. Book excerpt: These two volumes contain chapters written by experts in such areas as bio and food rheology, polymer rheology, flow of suspensions, flow in porous media, electrorheological fluids, etc. Computational as well as analytical mathematical descriptions, involving appropriate constitutive equations deal with complex flow situations of industrial importance. This work is unique in that it brings together state of the art reviews and recent advances in a variety of areas, involving viscoelastic materials, in a desirable and timely manner.
Download or read book The Finite Element Method for Fluid Dynamics written by O. C. Zienkiewicz and published by Elsevier. This book was released on 2005-12-08 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dealing with general problems in fluid mechanics, convection diffusion, compressible and incompressible laminar and turbulent flow, shallow water flows and waves, this is the leading text and reference for engineers working with fluid dynamics in fields including aerospace engineering, vehicle design, thermal engineering and many other engineering applications. The new edition is a complete fluids text and reference in its own right. Along with its companion volumes it forms part of the indispensable Finite Element Method series.New material in this edition includes sub-grid scale modelling; artificial compressibility; full new chapters on turbulent flows, free surface flows and porous medium flows; expanded shallow water flows plus long, medium and short waves; and advances in parallel computing. - A complete, stand-alone reference on fluid mechanics applications of the FEM for mechanical, aeronautical, automotive, marine, chemical and civil engineers. - Extensive new coverage of turbulent flow and free surface treatments
Download or read book Computational Methods for Polymers written by Masoud Soroush and published by MDPI. This book was released on 2020-12-10 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in computational methods for polymers. It covers multiscale modeling of polymers, polymerization reactions, and polymerization processes as well as control, monitoring, and estimation methods applied to polymerization processes. It presents theoretical insights gained from multiscale modeling validated with exprimental measurements. The book consolidates new computational tools and methods developed by academic researchers in this area and presents them systematically. The book is useful for graduate students, researchers, and process engineers and managers.
Download or read book The Impact of Applications on Mathematics written by Masato Wakayama and published by Springer. This book was released on 2014-07-18 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers presented at the Forum “The Impact of Applications on Mathematics” in October 2013. It describes an appropriate framework in which to highlight how real-world problems, over the centuries and today, have influenced and are influencing the development of mathematics and thereby, how mathematics is reshaped, in order to advance mathematics and its application. The contents of this book address productive and successful interaction between industry and mathematicians, as well as the cross-fertilization and collaboration that result when mathematics is involved with the advancement of science and technology.
Download or read book Liquid Film Coating written by P.M. Schweizer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multi-authored volume provides a comprehensive and in-depth account of the highly interdisciplinary science and technology of liquid film coating. The book covers fundamental principles from a wide range of scientific disciplines, including fluid mechanics aand transport phenomena, capillary hydrodynamics, surface and colloid science. The authors, all acknowledged eperts in their fields, represent a balance between industrial and academic points of view. Throughout the text, many case studies illustrate how scientific principles together with advanced experimental and theoretical methods are applied to develop and optimize manufacturing processes of eve increasing sophiatication and efficiency. In the first part of the book, the authors systematically recount the underlying physical principles and important material properties. The second part of the book gives a comprehensive overview of the most advanced experimental, mathematical and computational methods available today to investigate coating processes. The third part provides an overview and critical literature review for all major classes of liquid film coating processes of industrial importance.
Download or read book Numerical Methods and Advanced Simulation in Biomechanics and Biological Processes written by Miguel Cerrolaza and published by Academic Press. This book was released on 2017-12-28 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods and Advanced Simulation in Biomechanics and Biological Processes covers new and exciting modeling methods to help bioengineers tackle problems for which the Finite Element Method is not appropriate. The book covers a wide range of important subjects in the field of numerical methods applied to biomechanics, including bone biomechanics, tissue and cell mechanics, 3D printing, computer assisted surgery and fluid dynamics. Modeling strategies, technology and approaches are continuously evolving as the knowledge of biological processes increases. Both theory and applications are covered, making this an ideal book for researchers, students and R&D professionals. - Provides non-conventional analysis methods for modeling - Covers the Discrete Element Method (DEM), Particle Methods (PM), MessLess and MeshFree Methods (MLMF), Agent-Based Methods (ABM), Lattice-Boltzmann Methods (LBM) and Boundary Integral Methods (BIM) - Includes contributions from several world renowned experts in their fields - Compares pros and cons of each method to help you decide which method is most applicable to solving specific problems
Download or read book Numerical Simulation of Free Surface Flows of Polymeric Liquids written by Robert Walter George Shipman and published by . This book was released on 1990 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smoothed Particle Hydrodynamics written by Gui-Rong Liu and published by World Scientific. This book was released on 2003 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first-ever book on smoothed particle hydrodynamics (SPH) and its variations, covering the theoretical background, numerical techniques, code implementation issues, and many novel and interesting applications. It contains many appealing and practical examples, including free surface flows, high explosive detonation and explosion, underwater explosion and water mitigation of explosive shocks, high velocity impact and penetration, and multiple scale simulations coupled with the molecular dynamics method. An SPH source code is provided and coupling of SPH and molecular dynamics is discussed for multiscale simulation, making this a friendly book for readers and SPH users.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1988 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Conference on Advancements of Medicine and Health Care through Technology 29th August 2nd September 2011 Cluj Napoca Romania written by Simona Vlad and published by Springer Science & Business Media. This book was released on 2011-07-25 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the contributions of the third International Conference on Advancements of Medicine and Health Care through Technology (Meditech 2011), held in in Cluj-Napoca, Romania. The papers of this Proceedings volume present new developments in - Health Care Technology, - Medical Devices, Measurement and Instrumentation, - Medical Imaging, Image and Signal Processing, - Modeling and Simulation, - Molecular Bioengineering, - Biomechanics.
Download or read book Journal of Rheology written by and published by . This book was released on 2001 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes abstracts from the Journal of the Society of Rheology, Japan.
