Download or read book Numerical Simulation of the Aerodynamic Performance of an H rotor written by Yan Chen and published by . This book was released on 2011 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vertical axis wind turbines (VAWTs) are devices to convert wind energy into electricity. Unlike horizontal axis wind turbines (HAWT) where the main rotor shaft is set horizontally, VAWTs use vertical rotor shaft. Unlike HAWTs, VAWTs can be effectively used in urban environment where flow is characterized with unsteadiness and turbulence. The efficiency of the VA WTs highly depends on the aerodynamics of the wind blades. In this thesis we study the aerodynamics of the H-rotor, one type of VAWTs using computational fluid dynamics methods. Two different approaches are used in this study. One is based on direct numerical simulation (DNS) method and another is based on Reynolds averaged Navier-Stoke (RANS) model. For DNS study we solve the incompressible Navier-Stokes equations with a CFD package, OVERTURE. An overlapping moving grids technique is employed to handle the rotation of the wind turbine. For RANS simulation we used a commercial CFD package ANSYS-Fluent. The sliding mesh model of ANSYS-Fluent is applied to evaluate unsteady interaction between the stationary and rotating components. Our simulation shows that the DNS cannot correctly predict the power coefficient due to the lack of grid resolution at high Reynolds numbers. The RANS simulation results closely match the experimental data and RANS provides a way to study wind turbine aerodynamics in an efficient and reliable manner. Our simulation shows that the rotor with NACA0015 blade section obtains a maximum power coefficient of 0.16 at tip speed ratio of 2.5 for mean wind velocity of 3.9m/s. By replacing the blade section with NACA0022 airfoil profile, the maximum power coefficient of the rotor can be improved to 0.21 at tip speed ratio of 2.5 in the same wind conditions.

Download or read book Numerical Simulation of Wind Turbines written by Alessandro Bianchini and published by MDPI. This book was released on 2021-09-10 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains the research contributions belonging to the Special Issue "Numerical Simulation of Wind Turbines", published in 2020-2021. They consist of 15 original research papers and 1 editorial. Different topics are discussed, from innovative design solutions for large and small wind turbine to control, from advanced simulation techniques to noise prediction. The variety of methods used in the research contributions testifies the need for a holistic approach to the design and simulation of modern wind turbines and will be able to stimulate the interest of the wind energy community.

Download or read book Computational Techniques of Rotor Dynamics with the Finite Element Method written by Arne Vollan and published by CRC Press. This book was released on 2012-03-13 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than a century, we have had a firm grasp on rotor dynamics involving rigid bodies with regular shapes, such as cylinders and shafts. However, to achieve an equally solid understanding of the rotational behavior of flexible bodies—especially those with irregular shapes, such as propeller and turbine blades—we require more modern tools and methods. Computational Techniques of Rotor Dynamics with the Finite Element Method explores the application of practical finite element method (FEM)-based computational techniques and state-of-the-art engineering software. These are used to simulate behavior of rotational structures that enable the function of various types of machinery—from generators and wind turbines to airplane engines and propellers. The book’s first section focuses on the theoretical foundation of rotor dynamics, and the second concentrates on the engineering analysis of rotating structures. The authors explain techniques used in the modeling and computation of the forces involved in the rotational phenomenon. They then demonstrate how to interpret and apply the results to improve fidelity and performance. Coverage includes: Use of FEM to achieve the most accurate computational simulation of all gyroscopic forces occurring in rotational structures Details of highly efficient and accurate computational and numerical techniques for dynamic simulations Interpretation of computational results, which is instrumental to developing stable rotating machinery Practical application examples of rotational structures’ dynamic response to external and internal excitations An FEM case study that illustrates the computational complexities associated with modeling and computation of forces of rotor dynamics Assessment of propellers and turbines that are critical to the transportation and energy industries Useful to practicing engineers and graduate-level students alike, this self-contained volume also serves as an invaluable reference for researchers and instructors in this field. CRC Press Authors Speak Louis Komzsik introduces you to two books that share a common mathematical foundation, the finite element analysis technique. Watch the video.

Download or read book Lectures in Mathematical Models of Turbulence written by Brian Edward Launder and published by . This book was released on 1979 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Computational Modeling and Simulation written by Ran Guo and published by Trans Tech Publications Ltd. This book was released on 2013-10-15 with total page 1914 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2nd International Conference on Advances in Computational Modeling and Simulation (ACMS 2013), July 17-19, 2013, Kunming, China. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 316 papers are grouped as follows: Chapter 1: Computational Solid Mechanics; Chapter 2: Computational Fluid Dynamics; Chapter 3: Applied Mathematics; Chapter 4: Computational Analyze of Nonlinear Systems; Chapter 5: Applied Computational Methods in Engineering Research; Chapter 6: Computational Methods in Fire Safety; Chapter 7: Other Related Topics

Download or read book CFD for Wind and Tidal Offshore Turbines written by Esteban Ferrer and published by Springer. This book was released on 2015-06-09 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book encompasses novel CFD techniques to compute offshore wind and tidal applications. Computational fluid dynamics (CFD) techniques are regarded as the main design tool to explore the new engineering challenges presented by offshore wind and tidal turbines for energy generation. The difficulty and costs of undertaking experimental tests in offshore environments have increased the interest in the field of CFD which is used to design appropriate turbines and blades, understand fluid flow physical phenomena associated with offshore environments, predict power production or characterise offshore environments, amongst other topics.

Download or read book Wind Turbines and Aerodynamics Energy Harvesters written by Dan Zhao and published by Academic Press. This book was released on 2019-08-02 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind Turbines and Aerodynamics Energy Harvesters not only presents the most research-focused resource on aerodynamic energy harvesters, but also provides a detailed review on aeroacoustics characteristics. The book considers all developing aspects of 3D printed miniature and large-size Savonious wind harvesters, while also introducing and discussing bladeless and aeroelastic harvesters. Following with a review of Off-shore wind turbine aerodynamics modeling and measurements, the book continues the discussion by comparing the numerical codes for floating offshore wind turbines. Each chapter contains a detailed analysis and numerical and experimental case studies that consider recent research design, developments, and their application in practice. Written by an experienced, international team in this cross-disciplinary field, the book is an invaluable reference for wind power engineers, technicians and manufacturers, as well as researchers examining one of the most promising and efficient sources of renewable energy. Offers numerical models and case studies by experienced authors in this field Contains an overview and analysis of the latest research Explores 3D printing technology and the production of wind harvesters for real applications Includes, and uses, ANSYS FLUENT case files

Download or read book Numerical Simulation Advanced Techniques for Science and Engineering written by Ali Soofastaei and published by BoD – Books on Demand. This book was released on 2023-11-15 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical simulation is a powerful tool used in various fields of science and engineering to model complex systems and predict their behavior. It involves developing mathematical models that describe the behavior of a system and using computer algorithms to solve these models numerically. By doing so, researchers and engineers can study the behavior of a system in detail, which may only be possible with analytical methods. Numerical simulation has many advantages over traditional analytical methods. It allows researchers and engineers to study complex systems’ behavior in detail and predict their behavior in different scenarios. It also allows for the optimization of systems and the identification of design flaws before they are built. However, numerical simulation has its limitations. It requires significant computational resources, and the accuracy of the results depends on the quality of the mathematical models and the discretization methods used. Nevertheless, numerical simulation remains a valuable tool in many fields and its importance is likely to grow as computational resources become more powerful and widely available. Numerical simulation is widely used in physics, engineering, computer science, and mathematics. In physics, for example, numerical simulation is used to study the behavior of complex systems such as weather patterns, fluid dynamics, and particle interactions. In engineering, it is used to design and optimize systems such as aircraft, cars, and buildings. In computer science, numerical simulation models and optimization algorithms and data structures. In mathematics, it is used to study complex mathematical models and to solve complex equations. This book familiarizes readers with the practical application of the numerical simulation technique to solve complex analytical problems in different industries and sciences.

Download or read book Wind Turbine Design written by Ion Paraschivoiu and published by Presses inter Polytechnique. This book was released on 2002 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The depletion of global fossil fuel reserves combined with mounting environmental concerns has served to focus attention on the development of ecologically compatible and renewable alternative sources of energy. Wind energy, with its impressive growth rate of 40% over the last five years, is the fastest growing alternate source of energy in the world since its purely economic potential is complemented by its great positive environmental impact. The wind turbine, whether it may be a Horizontal Axis Wind Turbine (HAWT) or a Vertical Axis Wind Turbine (VAWT), offers a practical way to convert the wind energy into electrical or mechanical energy. Although this book focuses on the aerodynamic design and performance of VAWTs based on the Darrieus concept, it also discusses the comparison between HAWTs and VAWTs, future trends in design and the inherent socio-economic and environmental friendly aspects of wind energy as an alternate source of energy.

Download or read book Fundamental and Advanced Topics in Wind Power written by Rupp Carriveau and published by BoD – Books on Demand. This book was released on 2011-07-05 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the fastest growing source of energy in the world, wind has a very important role to play in the global energy mix. This text covers a spectrum of leading edge topics critical to the rapidly evolving wind power industry. The reader is introduced to the fundamentals of wind energy aerodynamics; then essential structural, mechanical, and electrical subjects are discussed. The book is composed of three sections that include the Aerodynamics and Environmental Loading of Wind Turbines, Structural and Electromechanical Elements of Wind Power Conversion, and Wind Turbine Control and System Integration. In addition to the fundamental rudiments illustrated, the reader will be exposed to specialized applied and advanced topics including magnetic suspension bearing systems, structural health monitoring, and the optimized integration of wind power into micro and smart grids.

Download or read book Flight Mechanics Modeling and Analysis written by Jitendra R. Raol and published by CRC Press. This book was released on 2023-03-31 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flight Mechanics Modeling and Analysis comprehensively covers flight mechanics and flight dynamics using a systems approach. This book focuses on applied mathematics and control theory in its discussion of flight mechanics to build a strong foundation for solving design and control problems in the areas of flight simulation and flight data analysis. The second edition has been expanded to include two new chapters and coverage of aeroservoelastic topics and engineering mechanics, presenting more concepts of flight control and aircraft parameter estimation. This book is intended for senior undergraduate aerospace students taking Aircraft Mechanics, Flight Dynamics & Controls, and Flight Mechanics courses. It will also be of interest to research students and R&D project-scientists of the same disciplines. Including end-of-chapter exercises and illustrative examples with a MATLAB®-based approach, this book also includes a Solutions Manual and Figure Slides for adopting instructors. Features: • Covers flight mechanics, flight simulation, flight testing, flight control, and aeroservoelasticity. • Features artificial neural network- and fuzzy logic-based aspects in modeling and analysis of flight mechanics systems: aircraft parameter estimation and reconfiguration of control. • Focuses on a systems-based approach. • Includes two new chapters, numerical simulation examples with MATLAB®-based implementations, and end-of-chapter exercises. • Includes a Solutions Manual and Figure Slides for adopting instructors.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Simulation of Transonic Flow About Airplanes and Helicopter Rotors written by W. F. Ballhaus and published by . This book was released on 1973 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most modern aircraft achieve optimum cruise performance and maneuverability when flying at high subsonic Mach numbers in the transonic regime. As the Mach number increases beyond the optimum, the extent and strength of these shock waves increases, and performance deteriorates rapidly giving way to flow separation and buffet. Predictions of in-flight performance for new configurations are often unreliable. It seems to attempt to use numerical simulations to supplement wind tunnel tests whenever possible. This method is discussed. (Modified author abstract).

Download or read book Resilient Energy Systems written by Ion Bostan and published by Springer Science & Business Media. This book was released on 2012-06-14 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable energy systems are playing an important role in the current discourse on energy security and sustainability. Scientific, engineering and economic solutions are adopted, and their is a constant effort to understand mechanisms and options to allow a faster penetration of renewable systems in the current energy mix and energy market. Readers of this book will have access to information, engineering design and economic solutions for harvesting local and regional energy potential by means of solar, wind, hydro resources. It will enable graduate students, researchers, promoters of sustainable energy technologies,consulting engineering experts, knowledgeable public to understand the solutions, methods, techniques suitable for different phases of design and implementation of a large selection of renewable energy technologies, and to identify their sustainability in application and policy.

Download or read book eScience on Distributed Computing Infrastructure written by Marian Bubak and published by Springer. This book was released on 2014-08-25 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: To help researchers from different areas of science understand and unlock the potential of the Polish Grid Infrastructure and to define their requirements and expectations, the following 13 pilot communities have been organized and involved in the PLGrid Plus project: Acoustics, AstroGrid-PL, Bioinformatics, Ecology, Energy Sector, Health Sciences, HEPGrid, Life Science, Materials, Metallurgy, Nanotechnologies, Quantum Chemistry and Molecular Physics, and SynchroGrid. The book describes the experience and scientific results achieved by the project partners. Chapters 1 to 8 provide a general overview of research and development activities in the framework of the project with emphasis on services for different scientific areas and an update on the status of the PL-Grid infrastructure, describing new developments in security and middleware. Chapters 9 to 13 discuss new environments and services which may be applied by all scientific communities. Chapters 14 to 36 present how the PLGrid Plus environments, tools and services are used in advanced domain specific computer simulations; these chapters present computational models, new algorithms, and ways in which they are implemented. The book also provides a glossary of terms and concepts. This book may serve as a resource for researchers, developers and system administrators working on efficient exploitation of available e-infrastructures, promoting collaboration and exchange of ideas in the process of constructing a common European e-infrastructure.

Download or read book Challenges and Opportunities in Industrial and Mechanical Engineering A Progressive Research Outlook written by S M Pandey and published by CRC Press. This book was released on 2024-06-24 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt: Present time Industry 4.0 is the need of all industries because it connects industries to AI, high productivity, safety, and flexibility, ensures the 100% utilization of resources across diverse manufacturing systems, and could accelerate normal manufacturing systems to advanced manufacturing systems by using robotics, additive manufacturing, and many more. In this book, the collection of selected papers is constituted from the International Conference on Progressive Research in Industrial & Mechanical Engineering (PRIME 2021), which was at the National Institute of Technology (NIT), Patna, India from August 5 to 7, 2021. This conference brings together all academic people, industry experts, and researchers from India as well as abroad for involving thoughts on the needs, challenges, new technology, opportunities threats in the current transformational field of aspire. This book deliberates on several elements and their relevance to hard-core areas of industrial and mechanical engineering including design engineering, production engineering, indus trial engineering, automobile engineering, thermal and fluid engineering, mechatronics control robotics, interdisciplinary, and many new emerging topics that keep potential in several areas of applications. This book focuses on providing versatile knowledge of cut ting-edge practices to all readers, helping to develop a clear vision toward Industry 4.0, robotics automation, and additive manufacturing in this demanding and evolving time. The book will be a treasured reference for students, researchers, and professionals inter ested in mechanical engineering and allied fields.

Download or read book An Experimental Investigation of the Effect of Wind Tunnel Walls on the Aerodynamic Performance of a Helicopter Rotor written by Victor M. Ganzer and published by . This book was released on 1960 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: