Download or read book Numerical Simulation of Solidification Inside a Cavity Based on the Enthalpy Formulation written by Qiang Duan and published by . This book was released on 1999 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IAENG Transactions on Engineering Sciences written by Sio-Iong Ao and published by CRC Press. This book was released on 2014-04-07 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two large international conferences on Advances in Engineering Sciences were held in Hong Kong, March 13-15, 2013, under the International MultiConference of Engineers and Computer Scientists (IMECS 2013), and in London, U.K., 3-5 July, 2013, under the World Congress on Engineering 2013 (WCE 2013) respectively. IMECS 2013 and WCE 2013 were organize
Download or read book Numerical Simulation of Fluid Flow and Heat Mass Transfer Processes written by N.C. Markatos and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational fluid flow is not an easy subject. Not only is the mathematical representation of physico-chemical hydrodynamics complex, but the accurate numerical solution of the resulting equations has challenged many numerate scientists and engineers over the past two decades. The modelling of physical phenomena and testing of new numerical schemes has been aided in the last 10 years or so by a number of basic fluid flow programs (MAC, TEACH, 2-E-FIX, GENMIX, etc). However, in 1981 a program (perhaps more precisely, a software product) called PHOENICS was released that was then (and still remains) arguably, the most powerful computational tool in the whole area of endeavour surrounding fluid dynamics. The aim of PHOENICS is to provide a framework for the modelling of complex processes involving fluid flow, heat transfer and chemical reactions. PHOENICS has now been is use for four years by a wide range of users across the world. It was thus perceived as useful to provide a forum for PHOENICS users to share their experiences in trying to address a wide range of problems. So it was that the First International PHOENICS Users Conference was conceived and planned for September 1985. The location, at the Dartford Campus of Thames Polytechnic, in the event, proved to be an ideal site, encouraging substantial interaction between the participants.
Download or read book Transactions on Engineering Technologies written by Sio-Iong Ao and published by Springer. This book was released on 2017-02-04 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume contains selected revised and extended research articles written by researchers who participated in the World Congress on Engineering and Computer Science 2015, held in San Francisco, USA, 21-23 October 2015. Topics covered include engineering mathematics, electrical engineering, circuits, communications systems, computer science, chemical engineering, systems engineering, manufacturing engineering, and industrial applications. The book offers the reader an overview of the state of the art in engineering technologies, computer science, systems engineering and applications, and will serve as an excellent reference work for researchers and graduate students working in these fields.
Download or read book Modelling the Flow and Solidification of Metals written by T.J. Smith and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The origin of this book can be traced to a Workshop held at the University of Cambridge in December 1985 under the auspices of the Wolfson Group for Studies of Fluid Flow and Mixing in Industrial Processes. This Group was es tablished at the University of Cambridge in January 1983 and includes mem bers from the Departments of Applied Mathematics and Theoretical Physics, Engineering and Chemical Engineering. As its name suggests, the objective of the Group is to undertake, co"ordinate and stimulate research in various aspects of fluid flow and mixing in industrial processes. However, another equally important aim for the Group is to promote co-operation between the University and industry at all levels from collaborative research projects to joint colloquia. The Workshop in December 1985 on 'Mixing, Stirring and Solidification in Metallurgical Processes' which led to this book was one in an annual series of such meetings first held in December 1983. The existence of the Wolfson Group is due to the enthusiasm of its original advocate, the late Professor J. A. Shercliff FRS, Head of the Department of Engineering who, together with Professor G. K. Batchelor FRS, Professor J. F. Davidson FRS, Dr J. C. R. Hunt, and Dr R. E. Britter, were responsible for the initial application to the Wolfson Foundation and for the subsequent direction of the Group's activities.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Simulation of Solidification written by Jin-Young Jung and published by . This book was released on 2000 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Numerical Heat Transfer Volume 2 written by W. Minkowycz and published by Routledge. This book was released on 2018-12-13 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the advances in numerical heat transfer modeling by applying high-performance computing resources, striking a balance between generic fundamentals, specific fundamentals, generic applications, and specific applications.
Download or read book Numerical Simulation of Solidification and Porosity Formation in Castings written by Kaushlendra Singh and published by . This book was released on 1988 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluid Mechanics and Fluid Power Vol 3 written by Suvanjan Bhattacharyya and published by Springer Nature. This book was released on 2023-04-17 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the 48th National Conference on Fluid Mechanics and Fluid Power (FMFP 2021) held at BITS Pilani in December 2021. It covers the topics such as fluid mechanics, measurement techniques in fluid flows, computational fluid dynamics, instability, transition and turbulence, fluid‐structure interaction, multiphase flows, micro- and nanoscale transport, bio-fluid mechanics, aerodynamics, turbomachinery, propulsion and power. The book will be useful for researchers and professionals interested in the broad field of mechanics.
Download or read book Hydrodynamics written by Harry Schulz and published by BoD – Books on Demand. This book was released on 2011-10-26 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: The constant evolution of the calculation capacity of the modern computers implies in a permanent effort to adjust the existing numerical codes, or to create new codes following new points of view, aiming to adequately simulate fluid flows and the related transport of physical properties. Additionally, the continuous improving of laboratory devices and equipment, which allow to record and measure fluid flows with a higher degree of details, induces to elaborate specific experiments, in order to shed light in unsolved aspects of the phenomena related to these flows. This volume presents conclusions about different aspects of calculated and observed flows, discussing the tools used in the analyses. It contains eighteen chapters, organized in four sections: 1) Smoothed Spheres, 2) Models and Codes in Fluid Dynamics, 3) Complex Hydraulic Engineering Applications, 4) Hydrodynamics and Heat/Mass Transfer. The chapters present results directed to the optimization of the methods and tools of Hydrodynamics.
Download or read book A NUMERICAL SIMULATION OF THE CAVITY FILLING PROCESS WITH PVC IN INJECTION MOLDING written by J.L. Berger and published by . This book was released on 1972 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transport Phenomena in Multiphase Systems written by Amir Faghri and published by Academic Press. This book was released on 2006 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering students in a wide variety of engineering disciplines from mechanical and chemical to biomedical and materials engineering must master the principles of transport phenomena as an essential tool in analyzing and designing any system or systems wherein momentum, heat and mass are transferred. This textbook was developed to address that need, with a clear presentation of the fundamentals, ample problem sets to reinforce that knowledge, and tangible examples of how this knowledge is put to use in engineering design. Professional engineers, too, will find this book invaluable as reference for everything from heat exchanger design to chemical processing system design and more. * Develops an understanding of the thermal and physical behavior of multiphase systems with phase change, including microscale and porosity, for practical applications in heat transfer, bioengineering, materials science, nuclear engineering, environmental engineering, process engineering, biotechnology and nanotechnology * Brings all three forms of phase change, i.e., liquid vapor, solid liquid and solid vapor, into one volume and describes them from one perspective in the context of fundamental treatment * Presents the generalized integral and differential transport phenomena equations for multi-component multiphase systems in local instance as well as averaging formulations. The molecular approach is also discussed with the connection between microscopic and molecular approaches * Presents basic principles of analyzing transport phenomena in multiphase systems with emphasis on melting, solidification, sublimation, vapor deposition, condensation, evaporation, boiling and two-phase flow heat transfer at the micro and macro levels * Solid/liquid/vapor interfacial phenomena, including the concepts of surface tension, wetting phenomena, disjoining pressure, contact angle, thin films and capillary phenomena, including interfacial balances for mass, species, momentum, and energy for multi-component and multiphase interfaces are discussed * Ample examples and end-of-chapter problems, with Solutions Manual and PowerPoint presentation available to the instructors
Download or read book A Volume of fluid Based Numerical Simulation of Solidification in Binary Alloys on Fixed Non uniform Co located Grids written by Mehdi Farrokhnejad Roudsari and published by . This book was released on 2009 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book TMS 2012 141st Annual Meeting and Exhibition Materials Processing and Interfaces written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2012-05-02 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers relating to materials processing andinterfaces presented at various symposia at the 2012 TMSAnnual Meeting.
Download or read book Real Ultimate Power written by Robert Hamburger and published by Citadel Press. This book was released on 2004 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty thousand web fans ahve already signed up to learn more about the publication of Real Ultimate Power. Where the web site leaves off, the book picks up. Just a few of the many topics completely exclusive to the book are: The Official Ninja Code of Honor, Fighting Styles, Some Frigg'n Bad Ass Ninja Weapons, A Ninja's Ninjas, How to Make Your Own Ninja Suit out of Stuff, the Official Ninja Game, the Official Ninja Quiz, and much more.
Download or read book Direct Numerical Simulation of Solidification Microstructures Affected by Fluid Flow written by and published by . This book was released on 1997 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effects of fluid flow on the solidification morphology of pure materials and solute microsegregation patterns of binary alloys are studied using a computational methodology based on a front tracking/finite difference method. A general single field formulation is presented for the full coupling of phase change, fluid flow, heat and solute transport. This formulation accounts for interfacial rejection/absorption of latent heat and solute, interfacial anisotropies, discontinuities in material properties between the liquid and solid phases, shrinkage/expansion upon solidification and motion and deformation of the solid. Numerical results are presented for the two dimensional dendritic solidification of pure succinonitrile and the solidification of globulitic grains of a plutonium-gallium alloy. For both problems, comparisons are made between solidification without fluid flow and solidification within a shear flow.
