Download or read book Crystal Growth Technology written by Hans J. Scheel and published by John Wiley & Sons. This book was released on 2009-07-31 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume deals with the technologies of crystal fabrication, of crystal machining, and of epilayer production and is the first book on industrial and scientific aspects of crystal and layer production. The major industrial crystals are treated: Si, GaAs, GaP, InP, CdTe, sapphire, oxide and halide scintillator crystals, crystals for optical, piezoelectric and microwave applications and more. Contains 29 contributions from leading crystal technologists covering the following topics: * General aspects of crystal growth technology * Silicon * Compound semiconductors * Oxides and halides * Crystal machining * Epitaxy and layer deposition Scientific and technological problems of production and machining of industrial crystals are discussed by top experts, most of them from the major growth industries and crystal growth centers. In addition, it will be useful for the users of crystals, for teachers and graduate students in materials sciences, in electronic and other functional materials, chemical and metallurgical engineering, micro-and optoelectronics including nanotechnology, mechanical engineering and precision-machining, microtechnology, and in solid-state sciences.

Download or read book Computational Science ICCS 2003 Part 1 written by Peter Sloot and published by Springer Science & Business Media. This book was released on 2003-05-22 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: The four-volume set LNCS 2657, LNCS 2658, LNCS 2659, and LNCS 2660 constitutes the refereed proceedings of the Third International Conference on Computational Science, ICCS 2003, held concurrently in Melbourne, Australia and in St. Petersburg, Russia in June 2003. The four volumes present more than 460 reviewed contributed and invited papers and span the whole range of computational science, from foundational issues in computer science and algorithmic mathematics to advanced applications in virtually all application fields making use of computational techniques. These proceedings give a unique account of recent results in the field.

Download or read book Numerical Flow Simulation II written by Ernst H. Hirschel and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this series is to publish promptly and in a de- tailed form new material from the field of Numerical Fluid Mechanics including the use of advanced computer systems. Published are reports on specialized conferences, workshops, research programs, and monographs. Contents: This volume contains nineteen reports on work, which is conducted since 1998 in the Collaborative Research Programme "Numerical Flow Simulation" of the Centre National de la Recherche Scientifique (CNRS) and the Deutsche Forschungsgemeinschaft (DFG). French and German engineers and mathematicians present their joint research on the topics "Development of Solution Techniques", "Crystal Growth and Melts", "Flows of Reacting Gases", and "Turbulent Flows". In the background of their work is the still strong growth of the performance of super-computer architectures, which, together with large advances in algorithms, is opening vast new application areas of numerical flow simulation in research and industrial work. Results of this programme from the period 1996 to 1998 have been presented in NNFM 66 (1998)

Download or read book Numerical Flow Simulation III written by Ernst Heinrich Hirschel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains eighteen reports on work, which is conducted since 2000 in the Collaborative Research Programme 'Numerical Flow Simulation' of the Centre National de la Recherche Scientifique (CNRS) and the Deutsche Forschungsgemeinschaft (DFG). French and German engineers and mathematicians present their joint research on the topics 'Development of Solution Techniques', 'Crystal Growth and Melts', 'Flows of Reacting Gases, Sound Generation' and 'Turbulent Flows'. In the background of their work is the still strong growth of the performance of super-computer architectures, which, together with large advances in algorithms, is opening vast new application areas of numerical flow simulation in research and industrial work. Results of this programme from the period 1996 to 1998 have been presented in NNFM 66 (1998), and NNFM75 (2001).

Download or read book Crystal Growth Technology written by Hans J. Scheel and published by John Wiley & Sons. This book was released on 2011-09-22 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book top experts treat general thermodynamic aspects of crystal fabrication; numerical simulation of industrial growth processes; commercial production of bulk silicon, compound semiconductors, scintillation and oxide crystals; X-ray characterization; and crystal machining. Also, the role of crystal technology for renewable energy and for saving energy is discussed. It will be useful for scientists and engineers involved in crystal and epilayer fabrication as well as for teachers and graduate students in material science, chemical and metallurgical engineering, and micro- and optoelectronics, including nanotechnology.

Download or read book Crystal Growth Processes Based on Capillarity written by Thierry Duffar and published by John Wiley & Sons. This book was released on 2010-03-30 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystal Growth Processes Based on Capillarity closely examines crystal growth technologies, like Czochralski, Floating zone, and Bridgman. The up-to-date reference contains detailed technical and applied information, especially on the difficulty of crystal shape control. Including practical examples and software applications, this book provides both theoretical and experimental sections. Edited by a well-respected academic with over twenty-five years of experience in this field, the text is an excellent resource for professionals in crystal growth as well as for students in understanding the fundamentals and the technology of crystal growth.

Download or read book Advances in Crystal Growth Research written by Y. Furukawa and published by Elsevier. This book was released on 2001-07-12 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to provide a timely collection that highlights advances in current research of crystal growth ranging from fundamental aspects to current applications involving a wide range of materials. This book is published on the basis of lecture texts of the 11th International Summer School on Crystal Growth (ISSCG-11) to be held at Doshisha Retreat Center in Shiga Prefecture Japan, on July 24-29, 2001. This school is always associated with the International Conference of Crystal Growth (ICCG) series that have been held every three years since 1973; thus this school continues the tradition of the past 10 schools of crystal growth.

Download or read book ICCGE 19 OMVPE 19 Program and Abstracts eBook written by ICCGE-19/OMVPE-19/AACG and published by CTI Meeting Technology. This book was released on 2019-07-11 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of abstracts for the 19th International Conference on Crystal Growth and Epitaxy (ICCGE-19) to be held jointly with the 19th US Biennial Workshop on Organometallic Vapor Phase Epitaxy (OMVPE-19) and the 17th International Summer School on Crystal Growth (ISSCG-17).

Download or read book Engineering Turbulence Modelling and Experiments 5 written by W. Rodi and published by Elsevier. This book was released on 2002-08-21 with total page 1029 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence is one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends increasingly on the performance of the turbulence models. This series of symposia provides a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. The papers in this set of proceedings were presented at the 5th International Symposium on Engineering Turbulence Modelling and Measurements in September 2002. They look at a variety of areas, including: Turbulence modelling; Direct and large-eddy simulations; Applications of turbulence models; Experimental studies; Transition; Turbulence control; Aerodynamic flow; Aero-acoustics; Turbomachinery flows; Heat transfer; Combustion systems; Two-phase flows. These papers are preceded by a section containing 6 invited papers covering various aspects of turbulence modelling and simulation as well as their practical application, combustion modelling and particle-image velocimetry.

Download or read book International School on Crystal Growth of Technologically Important Electronic Materials written by K. Byrappa and published by Allied Publishers. This book was released on 2003 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Crystal Growth and Evaluation of Silicon for VLSI and ULSI written by Golla Eranna and published by CRC Press. This book was released on 2014-12-08 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon, as a single-crystal semiconductor, has sparked a revolution in the field of electronics and touched nearly every field of science and technology. Though available abundantly as silica and in various other forms in nature, silicon is difficult to separate from its chemical compounds because of its reactivity. As a solid, silicon is chemically inert and stable, but growing it as a single crystal creates many technological challenges. Crystal Growth and Evaluation of Silicon for VLSI and ULSI is one of the first books to cover the systematic growth of silicon single crystals and the complete evaluation of silicon, from sand to useful wafers for device fabrication. Written for engineers and researchers working in semiconductor fabrication industries, this practical text: Describes different techniques used to grow silicon single crystals Explains how grown single-crystal ingots become a complete silicon wafer for integrated-circuit fabrication Reviews different methods to evaluate silicon wafers to determine suitability for device applications Analyzes silicon wafers in terms of resistivity and impurity concentration mapping Examines the effect of intentional and unintentional impurities Explores the defects found in regular silicon-crystal lattice Discusses silicon wafer preparation for VLSI and ULSI processing Crystal Growth and Evaluation of Silicon for VLSI and ULSI is an essential reference for different approaches to the selection of the basic silicon-containing compound, separation of silicon as metallurgical-grade pure silicon, subsequent purification, single-crystal growth, and defects and evaluation of the deviations within the grown crystals.

Download or read book Handbook of Crystal Growth written by Peter Rudolph and published by Elsevier. This book was released on 2014-11-04 with total page 1420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vol 2A: Basic TechnologiesHandbook of Crystal Growth, Second Edition Volume IIA (Basic Technologies) presents basic growth technologies and modern crystal cutting methods. Particularly, the methodical fundamentals and development of technology in the field of bulk crystallization on both industrial and research scales are explored. After an introductory chapter on the formation of minerals, ruling historically the basic crystal formation parameters, advanced basic technologies from melt, solution, and vapour being applied for research and production of the today most important materials, like silicon, semiconductor compounds and oxides are presented in detail. The interdisciplinary and general importance of crystal growth for human live are illustrated.Vol 2B: Growth Mechanisms and DynamicsHandbook of Crystal Growth, Second Edition Volume IIB (Growth Mechanisms and Dynamics) deals with characteristic mechanisms and dynamics accompanying each bulk crystal growth method discussed in Volume IIA. Before the atoms or molecules pass over from a position in the fluid medium (gas, melt or solution) to their place in the crystalline face they must be transported in the fluid over macroscopic distances by diffusion, buoyancy-driven convection, surface-tension-driven convection, and forced convection (rotation, acceleration, vibration, magnetic mixing). Further, the heat of fusion and the part carried by the species on their way to the crystal by conductive and convective transport must be dissipated in the solid phase by well-organized thermal conduction and radiation to maintain a stable propagating interface. Additionally, segregation and capillary phenomena play a decisional role for chemical composition and crystal shaping, respectively. Today, the increase of high-quality crystal yield, its size enlargement and reproducibility are imperative conditions to match the strong economy.Volume 2A - Presents the status and future of Czochralski and float zone growth of dislocation-free silicon - Examines directional solidification of silicon ingots for photovoltaics, vertical gradient freeze of GaAs, CdTe for HF electronics and IR imaging as well as antiferromagnetic compounds and super alloys for turbine blades - Focuses on growth of dielectric and conducting oxide crystals for lasers and non-linear optics - Topics on hydrothermal, flux and vapour phase growth of III-nitrides, silicon carbide and diamond are explored Volume 2B - Explores capillarity control of the crystal shape at the growth from the melt - Highlights modeling of heat and mass transport dynamics - Discusses control of convective melt processes by magnetic fields and vibration measures - Includes imperative information on the segregation phenomenon and validation of compositional homogeneity - Examines crystal defect generation mechanisms and their controllability - Illustrates proper automation modes for ensuring constant crystal growth process - Exhibits fundamentals of solution growth, gel growth of protein crystals, growth of superconductor materials and mass crystallization for food and pharmaceutical industries

Download or read book EPD Congress 2015 written by James Yurko and published by Springer. This book was released on 2016-12-10 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: EPD Congress is an annual collection that addresses extraction and processing metallurgy. The papers in this book are drawn from symposia held at the 2015 Annual Meeting of The Minerals, Metals & Materials Society. The 2015 edition includes papers from the following symposia: •Materials Processing Fundamentals •Solar Cell Silicon •High-Temperature Electrochemistry II

Download or read book Crystal Growth Technology written by K. Byrappa and published by Springer Science & Business Media. This book was released on 2003-04-17 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystals are the unacknowledged pillars of modern technology. The modern technological developments depend greatly on the availability of suitable single crystals, whether it is for lasers, semiconductors, magnetic devices, optical devices, superconductors, telecommunication, etc. In spite of great technological advancements in the recent years, we are still in the early stage with respect to the growth of several important crystals such as diamond, silicon carbide, PZT, gallium nitride, and so on. Unless the science of growing these crystals is understood precisely, it is impossible to grow them as large single crystals to be applied in modern industry. This book deals with almost all the modern crystal growth techniques that have been adopted, including appropriate case studies. Since there has been no other book published to cover the subject after the Handbook of Crystal Growth, Eds. DTJ Hurle, published during 1993-1995, this book will fill the existing gap for its readers. The book begins with "Growth Histories of Mineral Crystals" by the most senior expert in this field, Professor Ichiro Sunagawa. The next chapter reviews recent developments in the theory of crystal growth, which is equally important before moving on to actual techniques. After the first two fundamental chapters, the book covers other topics like the recent progress in quartz growth, diamond growth, silicon carbide single crystals, PZT crystals, nonlinear optical crystals, solid state laser crystals, gemstones, high melting oxides like lithium niobates, hydroxyapatite, GaAs by molecular beam epitaxy, superconducting crystals, morphology control, and more. For the first time, the crystal growth modeling has been discussed in detail with reference to PZT and SiC crystals.

Download or read book Springer Handbook of Crystal Growth written by Govindhan Dhanaraj and published by Springer Science & Business Media. This book was released on 2010-10-20 with total page 1823 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the years, many successful attempts have been chapters in this part describe the well-known processes made to describe the art and science of crystal growth, such as Czochralski, Kyropoulos, Bridgman, and o- and many review articles, monographs, symposium v- ing zone, and focus speci cally on recent advances in umes, and handbooks have been published to present improving these methodologies such as application of comprehensive reviews of the advances made in this magnetic elds, orientation of the growth axis, intro- eld. These publications are testament to the grow- duction of a pedestal, and shaped growth. They also ing interest in both bulk and thin- lm crystals because cover a wide range of materials from silicon and III–V of their electronic, optical, mechanical, microstructural, compounds to oxides and uorides. and other properties, and their diverse scienti c and The third part, Part C of the book, focuses on - technological applications. Indeed, most modern ad- lution growth. The various aspects of hydrothermal vances in semiconductor and optical devices would growth are discussed in two chapters, while three other not have been possible without the development of chapters present an overview of the nonlinear and laser many elemental, binary, ternary, and other compound crystals, KTP and KDP. The knowledge on the effect of crystals of varying properties and large sizes. The gravity on solution growth is presented through a c- literature devoted to basic understanding of growth parison of growth on Earth versus in a microgravity mechanisms, defect formation, and growth processes environment.

Download or read book Multiscale and Adaptivity Modeling Numerics and Applications written by Silvia Bertoluzza and published by Springer Science & Business Media. This book was released on 2012-01-07 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of lecture notes for the CIME course on "Multiscale and Adaptivity: Modeling, Numerics and Applications," held in Cetraro (Italy), in July 2009. Complex systems arise in several physical, chemical, and biological processes, in which length and time scales may span several orders of magnitude. Traditionally, scientists have focused on methods that are particularly applicable in only one regime, and knowledge of the system on one scale has been transferred to another scale only indirectly. Even with modern computer power, the complexity of such systems precludes their being treated directly with traditional tools, and new mathematical and computational instruments have had to be developed to tackle such problems. The outstanding and internationally renowned lecturers, coming from different areas of Applied Mathematics, have themselves contributed in an essential way to the development of the theory and techniques that constituted the subjects of the courses.

Download or read book Mathematics Key Technology for the Future written by Willi Jäger and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 733 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efficient transfer between science and society is crucial for their future development. The rapid progress of information technology and computer systems offers a large potential and new perspectives for solving complex problems. Mathematical modelling and simulation have become important tools not only in scientific investigations but also in analysing, planning and controlling technological and economic processes. Mathematics, imbedded in an interdisciplinary concept, has become a key technology. The book covers the results of a variety of major projects in industrial mathematics following an initiative of the German Federal Ministry of Education and Research. All projects are collaborations of industrial companies and university-based researchers, and range from automotive industry to computer technology and medical visualisation. In general, the projects presented in this volume prove that new mathematical ideas and methods can be decisive for the solution of industrial and economic problems.