Download or read book Numerical Simulation of Free Surface Flows of Polymeric Liquids written by Robert Walter George Shipman and published by . This book was released on 1990 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Phenomena in Flows of Viscoelastic Polymer Fluids written by A.I. Leonov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents theoretical and experimental studies of flows of elastic liquids. Falling into this category are particularly the melts and concentrated solutions of such flexible-chain polymers as polyethylene, polyisobutylene and polypropylene, all of which are widely used in polymer processing. These polydisperse polymers vary greatly, from batch to batch, in their mechanical properties and 20% variation in a property is believed to be good enough. l 7 All recent books - devoted to the rheology of polymers do not answer the question of which constitutive equations should be used for solving the fluid mechanic problems of polymer processing in the usual case of an appreciable nonlinear region of deformation where nonlinear effects of shear and extensional elasticity are very important. Viscoelastic constitut ive equations cited commonly (see, e.g. Refs 5 and 6) do not describe simultaneously even the simplest cases of deformations, viz. simple shear and uniaxial extension. Moreover, some of them are internally inconsist ent and sometimes display highly unstable behaviour in simple flows without any fundamental reasons. Even more respected molecular ap free from these defects.
Download or read book Modeling and Simulation in Polymers written by Purushottam D. Gujrati and published by John Wiley & Sons. This book was released on 2010-03-30 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling a gap in the literature and all set to become the standard in this field, this monograph begins with a look at computational viscoelastic fluid mechanics and studies of turbulent flows of dilute polymer solutions. It then goes on discuss simulations of nanocomposites, polymerization kinetics, computational approaches for polymers and modeling polyelectrolytes. Further sections deal with tire optimization, irreversible phenomena in polymers, the hydrodynamics of artificial and bacterial flagella as well as modeling and simulation in liquid crystals. The result is invaluable reading for polymer and theoretical chemists, chemists in industry, materials scientists and plastics technologists.
Download or read book Computational Analysis of Polymer Processing written by J.R.A. Pearson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Large, fast, digital computers have been widely used in engineering practice and their use has had a large impact in many fields. Polymer processing is no exception, and there is already a substantial amount of literature describing ways in which processes can be analysed, designed or controlled using the potentialities of modern computers. The emphasis given varies with the application, and most authors tend to quote the results of their calculations rather than describing in any detail the way the calculations were undertaken or the difficulties experienced in carrying them out. We aim to give here as useful and connected an account as we can of a wide class of applications, for the benefit of scientists and engineers who find themselves working on polymer processing problems and feel the need to undertake such calculations. The major application we have in mind is the simulation of the dynamics ofthe various physical phenomena which arise in a polymer process treated as a complex engineering system. This requires that the system be reasonably well represented by a limited number of relatively simple subprocesses whose connections can be clearly identified, that the domi nant physical effects relevant to each subprocess can be well defined in a suitable mathematical form and that the sets of equations and boundary conditions developed to describe the whole system can be successfully discretised and solved numerically.
Download or read book Numerical Simulation of Viscoelastic Flow of Polymer Fluids written by M. V. Bower and published by . This book was released on 1987 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Methods for Non Newtonian Fluids written by Philippe G. Ciarlet and published by Elsevier. This book was released on 1990 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Numerical Methods for Hyperbolic Problems explores the changes that have taken place in the past few decades regarding literature in the design, analysis and application of various numerical algorithms for solving hyperbolic equations. This volume provides concise summaries from experts in different types of algorithms, so that readers can find a variety of algorithms under different situations and readily understand their relative advantages and limitations.
Download or read book Numerical Simulations written by Lutz Angermann and published by BoD – Books on Demand. This book was released on 2010-12-30 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will interest researchers, scientists, engineers and graduate students in many disciplines, who make use of mathematical modeling and computer simulation. Although it represents only a small sample of the research activity on numerical simulations, the book will certainly serve as a valuable tool for researchers interested in getting involved in this multidisciplinary field. It will be useful to encourage further experimental and theoretical researches in the above mentioned areas of numerical simulation.
Download or read book Tip Streaming of Simple and Complex Fluids written by José María Montanero and published by Springer Nature. This book was released on with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics of Polymeric Liquids Volume 1 written by R. Byron Bird and published by Wiley-Interscience. This book was released on 1987-05-27 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revision of an introductory text examines Newtonian liquids and polymer fluid mechanics. It begins with a review of the main ideas of fluid dynamics as well as key points of Newtonian fluids.
Download or read book Numerical Methods for Non Newtonian Fluids written by and published by Elsevier. This book was released on 2010-12-20 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Newtonian flows and their numerical simulations have generated an abundant literature, as well as many publications and references to which can be found in this volume’s articles. This abundance of publications can be explained by the fact that non-Newtonian fluids occur in many real life situations: the food industry, oil & gas industry, chemical, civil and mechanical engineering, the bio-Sciences, to name just a few. Mathematical and numerical analysis of non-Newtonian fluid flow models provide challenging problems to partial differential equations specialists and applied computational mathematicians alike. This volume offers investigations. Results and conclusions that will no doubt be useful to engineers and computational and applied mathematicians who are focused on various aspects of non-Newtonian Fluid Mechanics. New review of well-known computational methods for the simulation viscoelastic and viscoplastic types Discusses new numerical methods that have proven to be more efficient and more accurate than traditional methods Articles that discuss the numerical simulation of particulate flow for viscoelastic fluids
Download or read book NUMERICAL SIMULATION OF VISCOELASTIC FLOWS OF POLYMER FLUIDS RHEOMETRY written by MARK VICTOR BOWER and published by . This book was released on 1985 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Flow of a Tubular Membrane. Since the flow is unsteady the problem reduces to a system of partial differential-integral equations with two-point boundary conditions in the spatial variable. The equations are solved in the spatial variable at each time using an Adams method with the associated shooting problem done by Broyden's method.
Download or read book Numerical Modelling written by Peep Miidla and published by BoD – Books on Demand. This book was released on 2012-03-23 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates applications and case studies performed by experts for professionals and students in the field of technology, engineering, materials, decision making management and other industries in which mathematical modelling plays a role. Each chapter discusses an example and these are ranging from well-known standards to novelty applications. Models are developed and analysed in details, authors carefully consider the procedure for constructing a mathematical replacement of phenomenon under consideration. For most of the cases this leads to the partial differential equations, for the solution of which numerical methods are necessary to use. The term Model is mainly understood as an ensemble of equations which describe the variables and interrelations of a physical system or process. Developments in computer technology and related software have provided numerous tools of increasing power for specialists in mathematical modelling. One finds a variety of these used to obtain the numerical results of the book.
Download or read book CVD Polymers written by Karen K. Gleason and published by John Wiley & Sons. This book was released on 2015-04-01 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The method of CVD (chemical vapor deposition) is a versatile technique to fabricate high-quality thin films and structured surfaces in the nanometer regime from the vapor phase. Already widely used for the deposition of inorganic materials in the semiconductor industry, CVD has become the method of choice in many applications to process polymers as well. This highly scalable technique allows for synthesizing high-purity, defect-free films and for systematically tuning their chemical, mechanical and physical properties. In addition, vapor phase processing is critical for the deposition of insoluble materials including fluoropolymers, electrically conductive polymers, and highly crosslinked organic networks. Furthermore, CVD enables the coating of substrates which would otherwise dissolve or swell upon exposure to solvents. The scope of the book encompasses CVD polymerization processes which directly translate the chemical mechanisms of traditional polymer synthesis and organic synthesis in homogeneous liquids into heterogeneous processes for the modification of solid surfaces. The book is structured into four parts, complemented by an introductory overview of the diverse process strategies for CVD of polymeric materials. The first part on the fundamentals of CVD polymers is followed by a detailed coverage of the materials chemistry of CVD polymers, including the main synthesis mechanisms and the resultant classes of materials. The third part focuses on the applications of these materials such as membrane modification and device fabrication. The final part discusses the potential for scale-up and commercialization of CVD polymers.
Download or read book Numerical Simulation of Non Newtonian Flow written by M.J. Crochet and published by Elsevier. This book was released on 2012-12-02 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Simulation of Non-Newtonian Flow focuses on the numerical simulation of non-Newtonian flow using finite difference and finite element techniques. Topics range from the basic equations governing non-Newtonian fluid mechanics to flow classification and finite element calculation of flow (generalized Newtonian flow and viscoelastic flow). An overview of finite difference and finite element methods is also presented. Comprised of 11 chapters, this volume begins with an introduction to non-Newtonian mechanics, paying particular attention to the rheometrical properties of non-Newtonian fluids as well as non-Newtonian flow in complex geometries. The role of non-Newtonian fluid mechanics is also considered. The discussion then turns to the basic equations governing non-Newtonian fluid mechanics, including Navier Stokes equations and rheological equations of state. The next chapter describes a flow classification in which the various flow problems are grouped under five main headings: flows dominated by shear viscosity, slow flows (slightly elastic liquids), small deformation flows, nearly-viscometric flows, and long-range memory effects in complex flows. The remainder of the book is devoted to numerical analysis of non-Newtonian fluids using finite difference and finite element techniques. This monograph will be of interest to students and practitioners of physics and mathematics.
Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.
Download or read book IUTAM Symposium on Free Surface Flows written by A.C. King and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Free surface flows arise in the natural world, physical and biological sciences and in some areas of modern technology and engineering. Exam ples include the breaking of sea waves on a harbour wall, the transport of sloshing fluids in partly filled containers, and the design of micronozzles for high speed ink-jet printing. Apart from the intrinsic mathematical challenge in describing and solving the governing equations, there are usually important environmental, safety and engineering features which need to be analysed and controlled. A rich variety of techniques has been developed over the past two decades to facilitate this analysis; singular perturbations, dynamical systems, and the development of sophisticated numerical codes. The extreme and sometimes violent nature of some free surface flows taxes these methods to the limit. The work presented at the symposium addressed these limits and can be loosely classified into four areas: (i) Axisymmetric free surface flows. There are a variety of problems in the printing, glass, fertiliser and fine chemical industries in which threads of fluid are made and controlled. Presentations were made in the areas of pinch-off for inviscid and viscous threads of fluid, recoil effects after droplet formation and the control of instability by forced vibration. (ii) Dynamic wetting. The motion of three phase contact lines, which are formed at the junction between two fluids and a solid, plays an important role in fluid mechanics.
Download or read book Complex Flows in Industrial Processes written by Antonio Fasano and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the fact that fluid dynamics and filtration through porous media and mathematics, there are classical research areas in engineering, physics, are still many industrial processes that require the study of new mathemat ical models for flows of particular complexity, due to the peculiar properties of the systems involved. The aim of this book is to provide a number of examples showing how frequently such situations arise in various branches of industrial technology. The selection of the subjects was motivated not only by their industrial rel evance and mathematical interest. What I had in mind was a collection of problems having a really distinctive character, thus bringing some fresh air into one of the oldest and most revered domains of applied mathematics. The incredible richness of nonstandard flow problems in industrial appli cations has always been, and still is, a constant surprise to me. Therefore I tried to offer a very large spectrum of subjects, with special attention devoted to those problems in which the modeling phase is far from being obvious, and the mathematical content is absolutely nontrivial. With such a view to diversity, topics have been selected from a variety of sources (such as glass industry, polymers science, coffee brewing, fuels pipelining), and contributors from different backgrounds (mathematics, physics, chemical engineering) have been included. Consequently, the mathematical nature of the problems formulated spans over a large range, so that their theoret ical investigation and numerical computation require a variety of different techniques.
