Download or read book Numerical Simulation of 3 D Turbulent Room Airflow Pattern and Temperature Field in UC Solar Decathlon House written by Prachi Rojatkar and published by . This book was released on 2007 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this study Computational Fluid Dynamics (CFD) has been used to simulate the airflow and temperature distribution patterns inside a Solar House (designed by University of Cincinnati team to compete in Solar Decathlon 2007) over a range of environmental conditions. Analysis of airflow and temperature field is presented for mechanically driven heating and cooling system (forced convection) and radiant floor heating system (natural convection). Main objective of the study is to analyze the design parameters for heating and cooling of the house with respect to indoor air distribution pattern and temperature field. Compliance with Solar Decathlon norms for indoor air temperature is also studied and corrective suggestions are made. Finally, thermal comfort for three major areas of the house (living/kitchen, bedroom and bathroom) is evaluated for each case. It can be concluded from the CFD study that the system design is satisfactory for the given house structure and will fulfill the requirements of thermal comfort.
Download or read book Numerical Simulation of Turbulent Flows and Noise Generation written by Christophe Brun and published by Springer. This book was released on 2009-03-18 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Large Eddy Simulation (LES) is a high-fidelity approach to the numerical simulation of turbulent flows. Recent developments have shown LES to be able to predict aerodynamic noise generation and propagation as well as the turbulent flow, by means of either a hybrid or a direct approach. This book is based on the results of two French/German research groups working on LES simulations in complex geometries and noise generation in turbulent flows. The results provide insights into modern prediction approaches for turbulent flows and noise generation mechanisms as well as their use for novel noise reduction concepts.
Download or read book Numerical Simulation of a Three dimensional Turbulent Boundary Layer written by Parviz Moin and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Building Performance Simulation for Design and Operation written by Jan L.M. Hensen and published by Routledge. This book was released on 2012-09-10 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective building performance simulation can reduce the environmental impact of the built environment, improve indoor quality and productivity, and facilitate future innovation and technological progress in construction. It draws on many disciplines, including physics, mathematics, material science, biophysics and human behavioural, environmental and computational sciences. The discipline itself is continuously evolving and maturing, and improvements in model robustness and fidelity are constantly being made. This has sparked a new agenda focusing on the effectiveness of simulation in building life-cycle processes. Building Performance Simulation for Design and Operation begins with an introduction to the concepts of performance indicators and targets, followed by a discussion on the role of building simulation in performance-based building design and operation. This sets the ground for in-depth discussion of performance prediction for energy demand, indoor environmental quality (including thermal, visual, indoor air quality and moisture phenomena), HVAC and renewable system performance, urban level modelling, building operational optimization and automation. Produced in cooperation with the International Building Performance Simulation Association (IBPSA), and featuring contributions from fourteen internationally recognised experts in this field, this book provides a unique and comprehensive overview of building performance simulation for the complete building life-cycle from conception to demolition. It is primarily intended for advanced students in building services engineering, and in architectural, environmental or mechanical engineering; and will be useful for building and systems designers and operators.
Download or read book Construction and Building Research written by Carmen Llinares-Millán and published by Springer Science & Business Media. This book was released on 2014-01-31 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many areas of knowledge converge in the building industry and therefore research in this field necessarily involves an interdisciplinary approach. Effective research requires strong relation between a broad variety of scientific and technological domains and more conventional construction or craft processes, while also considering advanced management processes, where all the main actors permanently interact. This publication takes an interdisciplinary approach grouping various studies on the building industry chosen from among the works presented for the 2nd International Conference on Construction and Building Research. The papers examine aspects of materials and building systems; construction technology; energy and sustainability; construction management; heritage, refurbishment and conservation. The information contained within these pages may be of interest to researchers and practitioners in construction and building activities from the academic sphere, as well as public and private sectors.
Download or read book Renewable Energy Resources written by John Twidell and published by Taylor & Francis. This book was released on 2006-01-16 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the years between the first and this second edition, renewable energy has come of age; it makes good sense, good government and good business. This book considers the unchanging principles of renewable energy technologies alongside modern application and case studies. In this second edition, the presentation of the fundamentals has been improved throughout, and chapters on economics and institutional factors have been added. Likewise, sections on environmental impact have been added to each technology chapter. Renewable Energy Resources supports multi-disciplinary.
Download or read book Rethinking Building Skins written by Eugenia Gasparri and published by Woodhead Publishing. This book was released on 2021-12-05 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rethinking Building Skins: Transformative Technologies and Research Trajectories provides a comprehensive collection of the most relevant and forward-looking research in the field of façade design and construction today, with a focus on both product and process innovation. The book brings together the expertise, creativity, and critical thinking of more than fifty global innovators from both academia and industry, to guide the reader in translating research into practice. It identifies new opportunities for the construction sector to respond to present challenges, towards a more sustainable, efficient, connected, and safe future. - Introduces the reader to the role of façades with respect to the main challenges ahead - Provides an overview of the major façade technological advancements throughout history and identifies prospective research trajectories - Includes interviews with key industry players from different backgrounds and expertise - Showcases a comprehensive range of leading research topics in the field, organised by product and process innovation - Covers major innovations across the value chain including façade design, fabrication, construction, operation and maintenance, and end-of-life - Contributes towards the definition of an international research agenda and identifies emerging market opportunities for the façade industry
Download or read book Complete Triathlon Guide written by USA Triathlon and published by Human Kinetics. This book was released on 2012-04-24 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Triathletes, rejoice! For the first time, USA Triathlon, its elite athletes, and the nation’s most respected coaches share their secrets, strategies, and advice for every stage, every event, and every aspect of the world’s most demanding sport. From training to technique, fueling to recovery, if it’s essential to the sport, it is covered in Complete Triathlon Guide. In this guide, you’ll find invaluable bike-handling techniques straight from the pros, learn how to assess running form and improve running cadence and stride, troubleshoot your freestyle swim stroke, and shave seconds off starts and transitions. And you’ll go inside the sport for expert instruction and personal insights from triathlon’s biggest names: Joe Friel Gordon Byrn Bob Seebohar Sage Rountree Ian Murray Sara McLarty Linda Cleveland George Dallam Steve Tarpinian Krista Austin Iñigo Mujika Alicia Kendig Barb Lindquist Christine Palmquist Graham Wilson Jackie Dowdeswell Jess Manning Joe Umphenour Karl Riecken Katie Baker Kristen Dieffenbach Kurt Perham Mathew Wilson Michael Kellmann Mike Ricci Scott Schnitzspahn Sergio Borges Sharone Aharon Suzanne M. Atkinson Timothy Carlson Yann Le Meur With Complete Triathlon Guide you’ll enhance your training regimen with the most effective workouts, including stage-specific programs for swimming, cycling, and running; programs for strength, flexibility, and endurance; tactics that address individual weaknesses; and advice on tapering to ensure you’re in peak physical condition on race day. From the latest on equipment and technology to preventing injuries and dehydration, this guide has you covered. Whether you’re gearing up for your first race or you’re a hard-core competitor looking to stay ahead of the pack, Complete Triathlon Guide is the one book you should not be without.
Download or read book Commissioning Existing Buildings written by Deb O'Rourke and published by . This book was released on 1998 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Residential Building Design and Construction written by Jack H. Willenbrock and published by Pearson. This book was released on 1998 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technical presentation of the material is enriched with enough detail to be suitable for academic use in residential construction, construction science, construction management, and building technology programs at universities and colleges while remaining clear enough to be a valuable resource for homebuilders and building code officials.
Download or read book Building Performance Analysis written by Pieter de Wilde and published by John Wiley & Sons. This book was released on 2018-07-23 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores and brings together the existent body of knowledge on building performance analysis Shortlisted in the CIBSE 2020 Building Performance Awards Building performance is an important yet surprisingly complex concept. This book presents a comprehensive and systematic overview of the subject. It provides a working definition of building performance, and an in-depth discussion of the role building performance plays throughout the building life cycle. The book also explores the perspectives of various stakeholders, the functions of buildings, performance requirements, performance quantification (both predicted and measured), criteria for success, and the challenges of using performance analysis in practice. Building Performance Analysis starts by introducing the subject of building performance: its key terms, definitions, history, and challenges. It then develops a theoretical foundation for the subject, explores the complexity of performance assessment, and the way that performance analysis impacts on actual buildings. In doing so, it attempts to answer the following questions: What is building performance? How can building performance be measured and analyzed? How does the analysis of building performance guide the improvement of buildings? And what can the building domain learn from the way performance is handled in other disciplines? Assembles the current body of knowledge on building performance analysis in one unique resource Offers deep insights into the complexity of using building performance analysis throughout the entire building life cycle, including design, operation and management Contributes an emergent theory of building performance and its analysis Building Performance Analysis will appeal to the building science community, both from industry and academia. It specifically targets advanced students in architectural engineering, building services design, building performance simulation and similar fields who hold an interest in ensuring that buildings meet the needs of their stakeholders.
Download or read book Parametric Design for Architecture written by Wassim Jabi and published by Laurence King Publishing. This book was released on 2013-09-15 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Architects use CAD to help them visualize their ideas. Parametric design is a fast-growing development of CAD that lets architects and designers specify the key parameters of their model and make changes interactively. Whenever changes are made the rest of the model updates automatically. Through a detailed description of various parametric, generative and algorithmic techniques, this book provides a practical guide to generating geometric and topological solutions for various situations, including explicit step-by-step tutorials. While the techniques and algorithms can be generalized to suit to any parametric environment, the book illustrates its concepts using the scripting languages of one of the most powerful 3D visualization and animation design software systems (Autodesk 3ds Max MAXScript), one of the most popular open-source Java-based scripting environments (Processing), and a brand new language specifically tailored for parametric and generative design (Autodesk DesignScript). This clear, accessible book will have a wide appeal to students and practitioners who would like to experiment with parametric techniques.
Download or read book Passive and Low Energy Architecture written by Simos Yannas and published by Elsevier. This book was released on 2013-10-22 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Passive and Low Energy Architecture contains the proceedings of the Second International PLEA Conference held in Crete, Greece, on June 28 to July 1, 1983. The book is organized into four parts as the topics of the conference. The first part brings together papers dealing with case studies of individual buildings or groups of buildings, completed or to be built, and of community planning. The case studies cover examples from 13 countries in Europe, North and Latin America, North Africa, the Middle East, and Asia. The second part contains papers on experimental work and technical developments with passive and low energy systems and components. The third section focuses on the ill-defined but crucial to designers, area of design aids. The fourth section centers on implementation and management of these energy systems, including topics of international programs, education, and training of design professionals. The book will be useful to energy conscious designers, architects, engineers, and planners in this field of interest.
Download or read book ASHRAE Handbook written by American Society of Heating, Refrigerating and Air-Conditioning Engineers and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Eco Urban Design written by John A. Flannery and published by Springer Science & Business Media. This book was released on 2011-08-18 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Eco-Urban Design" focuses on the unprecedented challenges currently faced by architects and designers. In a world where climate change, diminishing natural resources and an increasing global population have become indisputable facts of life there is now a rising demand for evolved buildings that no longer endanger the Earth's fragile ecological systems. This book endeavours to tell the positive side of the story by featuring considered design solutions provided by the world's most innovative architects and engineers. By only including realised projects which have been subjected to post construction monitoring this publication provides evidence-based information that measured reductions in carbon emissions, water and energy usage can actually be achieved in the field and not just on the drawing board. These completed projects demonstrate best practice and will inspire a new hybrid generation of designers who will combine architecture and engineering skills to resolve a key environmental challenge. Furthermore, these creative construction projects from a variety of genres including, commercial property, public buildings, social housing and private homes give testimony to the fact that investment in green archineering also provides a commercial advantage to forward thinking developers and investors.
Download or read book Swarm Planning written by Rob Roggema and published by Springer Science & Business Media. This book was released on 2013-09-11 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows that the problem of climate adaptation, which is described in social planning terms as ‘wicked,’ is at odds with the contemporary practice of spatial planning. The author proposes a new adjusted framework which is more adaptable to unpredictable, wicked, dynamic and non-linear processes. The inspiration for this new method is the behaviour of swarms: bees, ants, birds and fish are capable of self-organization, which enables the system to become less vulnerable to sudden environmental changes. The framework proposed in Swarm Planning consists of these four elements: Two levels of complexity, the first being the whole system and the second its individual components. Each of these has different attributes for adapting to change. Five layers, consisting of networks, focal points, unplanned space, natural resources and emerging occupation patterns. Each layer has its own spatial dynamic, and each is connected to a spatial scale. Non-linear processes, which emerge in different parts of the framework and include emerging patterns, connectedness and tipping points among others. Two planning processes; the first, ‘from small to large’ works upward from the slowest changing elements to more rapidly-changing ones. The second, ‘on the list of partners’ addresses each layer from networks through emerging occupation patterns. Swarm Planning applies this framework to a series of pilot studies, and appraises its performance using criteria for an adaptive landscape. The results show that the use of the Swarm Planning Framework reduces the vulnerability of landscapes as well as the impact of climate hazards and disasters, improves response to unexpected hazards and contains adaptation strategies. “This book is a must for planners in government and the private sector as it outlines the concept, strategies and techniques for swarm planning. It is also an important guide for policymakers looking to engage communities in a dialogue about the adaptation planning process.” Professor John Martin, La Trobe University “The ultimate value of the book lies in encouraging the planning community to consider options that go far beyond those offered by business-as-usual planning methodologies developed for a set of operating conditions that are fast becoming obsolete. As such it makes an important and much needed contribution to the field.” Assistant Professor Dr. Chrisna du Plessis, University of Pretoria
Download or read book Nearly Zero Energy Communities written by Ion Visa and published by Springer. This book was released on 2017-08-31 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the main challenges in implementing the concepts that aim to replace the regular fossil-fuels based energy pattern with the novel energy pattern relying on renewable energy. As the built environment is one major energy consumer, well known and exploited by each community member, the challenges addressing the built environment has to be solved with the consistent contribution of the community inhabitants and its administration. The transition phase, which already is under implementation, is represented by the Nearly Zero Energy Communities (nZEC). From the research topics towards the large scale implementation, the nZEC concept is analyzed in this book, starting with the specific issues of the sustainable built environment, beyond the Nearly Zero Energy Buildings towards a more integrated view on the community (Chapter1) and followed by various implementation concepts for renewable heating & cooling (Chapter 2), for renewable electrical energy production at community level (Chapter 3) and for sustainable water use and reuse (Chapter 4). As the topic is still new, specific instruments supporting education and training (Chapter 5) are needed, aiming to provide the knowledge that can drive the communities in the near future and is expected to increase the acceptance towards renewable energy implemented at community level. The sub-chapters of this book are the proceedings of the 5th edition of the Conference for Sustainable Energy, during 19-21 October 2017, organized by the R&D Centre Renewable Energy Systems and Recycling, in the R&D Institute of the Transilvania University of Brasov. This event was organized under the patronage of the International Federation for the Science of Machines and Mechanisms (IFToMM) - the Technical Committee Sustainable Energy Systems, of the European Sustainable Energy Alliance (ESEIA) and of the Romanian Academy of Technical Sciences.
