Download or read book Numerical Simulation in Vortex induced Vibrations at Low Mass damping written by E. Guilmineau and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Critical Review of the Intrinsic Nature of Vortex Induced Vibrations written by Turgut Sarpkaya and published by . This book was released on 2003 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a concise and comprehensive review of the progress made during the past two decades on vortex induced vibration (VIV) of mostly circular cylindrical structures subjected to steady uniform flow. The critical elements of the evolution of the ideas, theoretical insights, experimental methods, and numerical models are traced systematically; the strengths and weaknesses of the current state of the understanding of the complex fluid/structure interaction are discussed in some detail. Finally, some suggestions are made for further research on VIV. The organization of the paper is given at the end of the next section.
Download or read book Flow Induced Vibrations written by Eduard Naudascher and published by Courier Corporation. This book was released on 2012-03-27 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite their variety, the vibration phenomena from many different engineering fields can be classified into a relatively few basic excitation mechanisms. The classification enables engineers to identify all possible sources of excitation in a given system and to assess potential dangers. This graduate-level text presents a synthesis of research results and practical experience from disparate fields in the form of engineering guidelines. It is particularly geared toward assessing the possible sources of excitation in a flow system, in identifying the actual danger spots, and in finding appropriate remedial measures or cures. Flow-induced vibrations are presented in terms of their basic elements: body oscillators, fluid oscillators, and sources of excitation. By stressing these basic elements, the authors provide a basis for the transfer of knowledge from one system to another, as well as from one engineering field to another. In this manner, well-known theories on cylinders in cross-flow or well-executed solutions from the field of wind engineering--to name just two examples--may be useful in other systems or fields on which information is scarce. The unified approach is broad enough to permit treatment of the major excitation mechanism, yet simple enough to be of practical use.
Download or read book Hydrodynamics Around Cylindrical Structures written by Jorgen Fredsoe and published by World Scientific. This book was released on 1997-03-17 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the subject of wave/current flow around a cylinder, the forces induced on the cylinder by the flow, and the vibration pattern of slender structures in a marine environment.The primary aim of the book is to describe the flow pattern and the resulting load which develops when waves or current meet a cylinder. Attention is paid to the special case of a circular cylinder. The development in the forces is related to the various flow patterns and is discussed in detail. Regular as well as irregular waves are considered, and special cases like wall proximities (pipelines) are also investigated.The book is intended for MSc students with some experience in basic fluid mechanics and for PhD students.
Download or read book Fluid Structure Interactions written by Michael P. Païdoussis and published by Cambridge University Press. This book was released on 2014-01-02 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structures in contact with fluid flow, whether natural or man-made, are inevitably subject to flow-induced forces and flow-induced vibration: from plant leaves to traffic signs and to more substantial structures, such as bridge decks and heat exchanger tubes. Under certain conditions the vibration may be self-excited, and it is usually referred to as an instability. These instabilities and, more specifically, the conditions under which they arise are of great importance to designers and operators of the systems concerned because of the significant potential to cause damage in the short term. Such flow-induced instabilities are the subject of this book. In particular, the flow-induced instabilities treated in this book are associated with cross-flow, that is, flow normal to the long axis of the structure. The book treats a specific set of problems that are fundamentally and technologically important: galloping, vortex-shedding oscillations under lock-in conditions, and rain-and-wind-induced vibrations, among others. The emphasis throughout is on providing a physical description of the phenomena that is as clear and up-to-date as possible.
Download or read book Fluid Structure Sound Interactions and Control written by Yu Zhou and published by Springer. This book was released on 2018-05-15 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the Symposium on Fluid-Structure-Sound Interactions and Control (FSSIC), (held in Tokyo on Aug. 21-24, 2017), which largely focused on advances in the theory, experiments on, and numerical simulation of turbulence in the contexts of flow-induced vibration, noise and their control. This includes several practical areas of application, such as the aerodynamics of road and space vehicles, marine and civil engineering, nuclear reactors and biomedical science, etc. Uniquely, these proceedings integrate acoustics with the study of flow-induced vibration, which is not a common practice but can be extremely beneficial to understanding, simulating and controlling vibration. The symposium provides a vital forum where academics, scientists and engineers working in all related branches can exchange and share their latest findings, ideas and innovations – bringing together researchers from both east and west to chart the frontiers of FSSIC.
Download or read book Flow induced Vibration written by Robert D. Blevins and published by . This book was released on 2001-01-01 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on applications for offshore platforms and piping; and, wind-induced vibration of buildings, bridges, and towers. This title also focuses on acoustic and mechanical vibration of heat exchangers, power lines, and process ducting.
Download or read book Flow induced Vibration written by Robert D. Blevins and published by . This book was released on 1977 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulence written by Peter Davidson and published by Oxford University Press, USA. This book was released on 2015 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an advanced textbook on the subject of turbulence, and is suitable for engineers, physical scientists and applied mathematicians. The aim of the book is to bridge the gap between the elementary accounts of turbulence found in undergraduate texts, and the more rigorous monographs on the subject. Throughout, the book combines the maximum of physical insight with the minimum of mathematical detail. Chapters 1 to 5 may be appropriate as background material for an advanced undergraduate or introductory postgraduate course on turbulence, while chapters 6 to 10 may be suitable as background material for an advanced postgraduate course on turbulence, or act as a reference source for professional researchers. This second edition covers a decade of advancement in the field, streamlining the original content while updating the sections where the subject has moved on. The expanded content includes large-scale dynamics, stratified & rotating turbulence, the increased power of direct numerical simulation, two-dimensional turbulence, Magnetohydrodynamics, and turbulence in the core of the Earth
Download or read book Flow induced Vibration of Circular and Square Cylinder with Low Mass and Damping written by Jisheng Zhao and published by . This book was released on 2012 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis investigates cross-flow flow-induced vibration of elastically mounted rigid circular and square cylinders with low mass and damping ratio over a range of low and vibration parameters. In particular, two typical body oscillator phenomena of flow-induced vibration, vortex-induced vibration and galloping, are studied experimentally. Thus, the study consists of two main parts. The first part, using simultaneous displacement, force and vorticity measurements, investigates the dynamic response of a circular cylinder undergoing transverse free vortex-induced vibrations and controlled trajectory-following vibrations. The second part characterises the amplitude and frequency responses of a square cylinder with angle of attack variation. Despite extensive work has been undertaken to understand the fundamental characteristics of free and forced vibrations of a circular cylinder, there are still a number of unresolved questions in the literature concerning the similarities and differences between the free and forced vibration cases. In order to directly compare these two vibration cases, a low-friction air-bearing rig and a real-time feedback control system were therefore designed and implemented in experiments. The major results obtained show that the transverse lift force and the decomposed vortex force experienced by a cylinder forced to follow the trajectory of free VIV are identical to the free vibration case, when both the total phase and the vortex phase relative to the body motion are constantly stable. However, significant differences between the two vibration cases are found at a reduced velocity located in the middle upper branch of VIV where largest-scale body vibration occur with complex switching phenomena in the total phase and the vortex phase. The results from the second part, flow-induced vibration of a square cylinder with angle of attack variation, show that the cylinder, as expected, experiences galloping at the zero angle of attack orientation (0 degree) and vortex-induced vibration at the diamond orientation (45 degree). As the angle of attack is varied from 45 degree to 0 degree, the body can undergo combinations of both vortex-induced vibration and galloping in a mixed response region. In this region, the oscillation amplitude response exhibits a new branch that exceeds the responses resulting from the two body-oscillator phenomena independently. For velocities above this resonant region, the body oscillation frequency splits into two diverging branches. Further, analysis of the amplitude reveals that the transition between galloping and vortex-induced vibrations occurs over a narrow range of angle of incidence. Despite the rich set of states found in the parameter space the vortex shedding modes remain very similar to those found previously in vortex-induced vibration.
Download or read book Numerical Analysis written by Jan Awrejcewicz and published by BoD – Books on Demand. This book was released on 2011-09-09 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Analysis - Theory and Application is an edited book divided into two parts: Part I devoted to Theory, and Part II dealing with Application. The presented book is focused on introducing theoretical approaches of numerical analysis as well as applications of various numerical methods to either study or solving numerous theoretical and engineering problems. Since a large number of pure theoretical research is proposed as well as a large amount of applications oriented numerical simulation results are given, the book can be useful for both theoretical and applied research aimed on numerical simulations. In addition, in many cases the presented approaches can be applied directly either by theoreticians or engineers.
Download or read book Numerical Simulation in Molecular Dynamics written by Michael Griebel and published by Springer Science & Business Media. This book was released on 2007-08-16 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the necessary numerical methods, the theoretical background and foundations and the techniques involved in creating computer particle models, including linked-cell method, SPME-method, tree codes, amd multipol technique. It illustrates modeling, discretization, algorithms and their parallel implementation with MPI on computer systems with distributed memory. The text offers step-by-step explanations of numerical simulation, providing illustrative code examples. With the description of the algorithms and the presentation of the results of various simulations from fields such as material science, nanotechnology, biochemistry and astrophysics, the reader of this book will learn how to write programs capable of running successful experiments for molecular dynamics.
Download or read book Proceedings of GeoShanghai 2018 International Conference Advances in Soil Dynamics and Foundation Engineering written by TONG Qiu and published by Springer. This book was released on 2018-05-07 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the sixth volume of the proceedings of the 4th GeoShanghai International Conference that was held on May 27 - 30, 2018. This volume, entitled “Advances in Soil Dynamics and Foundation Engineering”, covers the recent advances and technologies in soil dynamics and foundation engineering. These papers are grouped into four categories: (1) soil dynamics and earthquake engineering, (2) deep excavations and retaining structures, (3) shafts and deep foundations, and (4) offshore geotechnics. It presents the state-of-the-art theories, experiments, methodologies and findings in the related areas. The book may benefit researchers and scientists from the academic fields of soil dynamics and earthquake engineering, geotechnical engineering, geoenvironmental engineering, transportation engineering, geology, mining and energy, as well as practical engineers from the industry. Each of the papers included in this book received at least two positive peer reviews. The editors would like to express their sincerest appreciation to all of the anonymous reviewers all over the world, for their diligent work.
Download or read book Self Excited Vibration written by Wenjing Ding and published by Springer Science & Business Media. This book was released on 2013-01-20 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a systematic understanding of its theoretical foundations, “Self-Excited Vibration: Theory, Paradigms, and Research Methods” offers a method for analyzing any type of self-excited vibration (SEV). After summarizing the research results of various SEV phenomenon, including chatter, shimmy, rotor whirl, flutter, gallop, and SEV of man-made control systems, the author constructs a general constitutive mechanism of SEV, as well as a common research program and detailed analysis technique. All of these will help the reader independently analyze any new SEV phenomena. Prof. Wenjing Ding was the Director of the Dynamics and Vibration Division of the Engineering Mechanics Department of Tsinghua University, China.
Download or read book Twenty First Symposium on Naval Hydrodynamics written by National Research Council and published by National Academies Press. This book was released on 1997-09-11 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Springer Handbook of Ocean Engineering written by Manhar R. Dhanak and published by Springer. This book was released on 2016-07-23 with total page 1344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is the definitive reference for the interdisciplinary field that is ocean engineering. It integrates the coverage of fundamental and applied material and encompasses a diverse spectrum of systems, concepts and operations in the maritime environment, as well as providing a comprehensive update on contemporary, leading-edge ocean technologies. Coverage includes an overview on the fundamentals of ocean science, ocean signals and instrumentation, coastal structures, developments in ocean energy technologies and ocean vehicles and automation. It aims at practitioners in a range of offshore industries and naval establishments as well as academic researchers and graduate students in ocean, coastal, offshore and marine engineering and naval architecture. The Springer Handbook of Ocean Engineering is organized in five parts: Part A: Fundamentals, Part B: Autonomous Ocean Vehicles, Subsystems and Control, Part C: Coastal Design, Part D: Offshore Technologies, Part E: Energy Conversion
Download or read book Vibration Problems in Structures written by Hugo Bachmann and published by Birkhäuser. This book was released on 2012-12-06 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authors: Hugo Bachmann, Walter J. Ammann, Florian Deischl, Josef Eisenmann, Ingomar Floegl, Gerhard H. Hirsch, Günter K. Klein, Göran J. Lande, Oskar Mahrenholtz, Hans G. Natke, Hans Nussbaumer, Anthony J. Pretlove, Johann H. Rainer, Ernst-Ulrich Saemann, Lorenz Steinbeisser. Large structures such as factories, gymnasia, concert halls, bridges, towers, masts and chimneys can be detrimentally affected by vibrations. These vibrations can cause either serviceability problems, severely hampering the user's comfort, or safety problems. The aim of this book is to provide structural and civil engineers working in construction and environmental engineering with practical guidelines for counteracting vibration problems. Dynamic actions are considered from the following sources of vibration: - human body motions, - rotating, oscillating and impacting machines, - wind flow, - road traffic, railway traffic and construction work. The main section of the book presents tools that aid in decision-making and in deriving simple solutions to cases of frequently occurring "normal" vibration problems. Complexer problems and more advanced solutions are also considered. In all cases these guidelines should enable the engineer to decide on appropriate solutions expeditiously. The appendices of the book contain fundamentals essential to the main chapters.
