Download or read book Numerical Simulation for Electrostatic Field Flow Field and Particle Behavior in a Wire Plate Electrostatic Precipitator written by Hong Lei and published by Nova Science Publishers. This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Proceedings of 2023 4th International Symposium on Insulation and Discharge Computation for Power Equipment IDCOMPU2023 written by Xuzhu Dong and published by Springer Nature. This book was released on 2024-01-31 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes original, peer-reviewed research papers from the 2023 4th International Symposium on Insulation and Discharge Computation for Power Equipment (IDCOMPU2023), held in Wuhan, China. The topics covered include but are not limited to: insulation, discharge computations, electric power equipment, and electrical materials. The papers share the latest findings in the field of insulation and discharge computations of electric power equipment, making the book a valuable asset for researchers, engineers, university students, etc.
Download or read book Three dimensional Modeling of Electrostatic Precipitator Using Hybrid Finite Element flux Corrected Transport Technique written by Niloofar Farnoosh and published by . This book was released on 2011 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents the results of a three-dimensional simulation of the entire precipitation process inside a single-electrode one-stage electrostatic precipitator (ESP). The model was designed to predict the motion of ions, gas and solid particles. The precipitator consists of two parallel grounded collecting plates with a corona electrode mounted at the center, parallel to the plates and excited with a high dc voltage. The complex mutual interaction between the three coexisting phenomena of electrostatic field, fluid dynamics and the particulate transport, which affect the ESP process, were taken into account in all the simulations. The electrostatic field and ionic space charge density due to corona discharge were computed by numerically solving Poisson and current continuity equations, using a hybrid Finite Element (FEM) - Flux Corrected Transport (FCT) method. The detailed numerical approach and simulation procedure is discussed and applied throughout the thesis. Calculations of the gas flow were carried out by solving the Reynolds-averaged Navier-Stokes equations using the commercial FLUENT 6.2 software, which is based on the Finite Volume Method (FVM). The turbulence effect was included by using the k- model included in FLUENT. An additional source term was added to the gas flow equation to include the effect of the electric field, obtained by solving a coupled system of the electric field and charge transport equations, using the User-Defined-Function (UDF) feature of FLUENT. The particle phase was simulated using a Lagrangian-type Discrete Random Walk (DRW) model, where a large number of particles charged by combined field and diffusion charging mechanisms was traced with their motion affected by electrostatic and aerodynamic forces in turbulent flow using the Discrete Phase Model (DPM) and programming UDFs in FLUENT. The airflow patterns under the influence of electrohydrodynamic (EHD) secondary flow and external flows, particle charging and deposition along the channel, and ESP performance in removal of submicron particulates were compared for smooth and spiked discharge electrode configurations in the parallel plate precipitator assuming various particle concentrations at the inlet. Finally, a laboratory scale wire-cylinder ESP to collect conductive submicron diesel particles was modeled. The influence of different inlet gas velocities and excitation voltages on the particle migration velocity and precipitation performance were investigated. In some cases, the simulation results were compared with the existing experimental data published in literature.
Download or read book High Temperature Electrostatic Precipitation Fundamentals Phenomena and Feasibility written by Patrick Bürger and published by Cuvillier Verlag. This book was released on 2023-07-03 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle separation from hot gases is a challenging task, especially for nanoparticles. Therefore, it is usually avoided by quenching the hot gas to conduct particle separation at a more convenient temperature. In these cases, valuable high-caloric heat is either not utilized at all or only inefficiently because of particle deposition on the heat exchanger surfaces. Valuable potential is thus wasted, as high-temperature processes are already an essential part of many industries and become increasingly relevant for other industrial sectors (e.g., pyrolytic processes in the circular economy). To reduce operating costs and environmental impact, the efficient use of resources (especially fossil fuels) is an absolute necessity. To tackle this pending problem, the concept of high-temperature electrostatic precipitation is investigated in this doctoral thesis. In an electrostatic precipitator, particles are charged by charge carriers produced in a corona discharge near the discharge electrode. Charged particles migrate due to the electric field and subsequently precipitate onto the collection electrode. This doctoral thesis clearly demonstrates the feasibility of nanoparticle removal from hot gases at up to 1073 K (800 °C) using electrostatic precipitation while presenting novel insights into the charge carrier properties and their distribution, the influence of thermionic emission on the operation of electrostatic precipitators, and the fundamentals of particle charging at high temperatures.
Download or read book Electrostatic Precipitation written by Keping Yan and published by Springer Science & Business Media. This book was released on 2010-07-19 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Electrostatic Precipitation" includes selected papers presented at the 11th International Conference on Electrostatic Precipitation. It presents the newest developments in electrostatic precipitation, flue gas desulphurization (FGD), selective catalytic reduction (SCR), and non-thermal plasma techniques for multi-pollutants emission control. Almost all outstanding scientists and engineers world-wide in the field will report their on-going researches. The book will be a useful reference for scientists and engineers to keep abreast of the latest developments in environmental science and engineering.
Download or read book Numerical Modeling of the Novel Cross flow Electrostatic Precipitator written by Ohioma Eboreime and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrostatic precipitators (ESP) are used extensively for removing particulates from a gas flow by charging the particles and then removing them in the presence of an electric field. Traditional ESP designs use the walls of the flow channel as the grounded collection surface. The objective of this present study is to evaluate an ESP configuration in which an array of cylinders in a crossflow configuration is used as grounded collection surfaces. A numerical approach using ANSYS Fluent computational fluid dynamics (CFD) software was used to build a two-dimensional model for the gas flow and particulate capture. The model uses governing equations of fluid mechanics and electric fields to determine the fluid flow profiles, the charging of the particles, and the transport of the charged particles to the surfaces of grounded collection cylinders. The results of this study show that the particle collection is strongly influenced by two opposing phenomena, both of which are determined by the geometrical arrangement of the array of cylinders. The first phenomenon is the generation of turbulence regions behind the collector rows due to the cylinders obstructing the flow, which can enhance particulate capture downstream. The second is the shielding of the electric field by the cylinders which reduces the particulate transport to the grounded cylinder surfaces in the region separating the collector rows.
Download or read book Applied Electrostatic Precipitation written by K.R. Parker and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many industrial, power generation and chemical processes produce unwanted fine particulate material as a consequence of their operation. Electrostatic precipitation is a highly efficient method of removing entrained particulate contaminants from exhaust gases and is extensively used in these industries to limit particulate emissions. New legislation aimed at improving the environment by further limiting these discharges has resulted in the technique undergoing considerable development over the past decade, to the point where it has become the method of choice, over a wide range of applications, for limiting particulate discharges. In this new book, the editor has brought together an international team of contributors, mainly industrialists and consultants, to produce an authorative and practical guide to electrostatic precipitation. This book is of interest to all those in process industries or power generation and to academics concerned with gas cleaning and environmental issues.
Download or read book Electrostatic Precipitator Manual written by Jack Raymond McDonald and published by William Andrew. This book was released on 1982 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual covers the fundamentals of electrostatic precipitation; mechanical and electrical components of electrostatic precipitators; factors influencing precipitator performance; measurement of important parameters; advantages and disadvantages of cold-side, hot-side, and flue gas conditioned electrostatic precipitators; safety aspects; maintenance procedures; troubleshooting procedures; the usage of a computer model for electrostatic precipitation; and features of a well-equipped electrostatic precipitator.
Download or read book Multi Pollutant Control for Flue Gases written by Xiang Gao and published by Springer Nature. This book was released on 2021-10-20 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest multi-pollutant (mainly NOx, SOx, particulate matter, heavy metals) control technologies for flue gases and the applications in coal-fired power plants. Pollutant control by catalytic, electric, and absorption methods, the multi-pollutant removal system and its performance evaluation are systematically introduced. This book is a valuable reference for researchers and practitioners in environmental science & engineering, energy power engineering, and chemical science & engineering, etc.
Download or read book Electrical Operation of Electrostatic Precipitators written by K. R. Parker and published by IET. This book was released on 2003-02-07 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book identifies the physical and engineering basis for the development of electrical equipment for electrostatic precipitators and thoroughly explores the technological factors which optimise the efficiency of the precipitator and hence minimise emissions, as well as future developments in the electrical field.
Download or read book Electrostatic Precipitation written by Sabert Oglesby and published by . This book was released on 1978 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrostatic Precipitators written by Jaroslav Böhm and published by Elsevier Science & Technology. This book was released on 1982 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glas cleaning in general. Electric fields. Corona discharges. Charging of particle suspensions. Motions of admixture particles. Formation and removal of deposit layers. Behaviour of deposit layers. The separating process in electrostatic precipitators. Precipitator design and components. Powering of precipitators. Some industrial applications of precipitators.
Download or read book Computational Fluid Dynamics Review 1998 In 2 Volumes written by Mohamed M Hafez and published by World Scientific. This book was released on 1998-11-20 with total page 1169 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first volume of CFD Review was published in 1995. The purpose of this new publication is to present comprehensive surveys and review articles which provide up-to-date information about recent progress in computational fluid dynamics, on a regular basis. Because of the multidisciplinary nature of CFD, it is difficult to cope with all the important developments in related areas. There are at least ten regular international conferences dealing with different aspects of CFD.It is a real challenge to keep up with all these activities and to be aware of essential and fundamental contributions in these areas. It is hoped that CFD Review will help in this regard by covering the state-of-the-art in this field.The present book contains sixty-two articles written by authors from the US, Europe, Japan and China, covering the main aspects of CFD. There are five sections: general topics, numerical methods, flow physics, interdisciplinary applications, parallel computation and flow visualization. The section on numerical methods includes grids, schemes and solvers, while that on flow physics includes incompressible and compressible flows, hypersonics and gas kinetics as well as transition and turbulence. This book should be useful to all researchers in this fast-developing field.
Download or read book Proceedings of the 16th International Conference on Electrostatic Precipitation written by Bálint Németh and published by Springer Nature. This book was released on 2023-05-30 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This present book includes selected papers presented at the 16th International Conference on Electrostatic Precipitation. It presents research shortcomings and future orientations in ESP among others, advancements in power supply, modelling, novel applications and new techniques, industrial experience and case studies. Outstanding scientists and engineers worldwide in the field reported their on-going researches. The book is a useful reference for scientists and engineers to keep abreast of the latest developments in environmental science and engineering.
Download or read book Operation and Maintenance Manual for Electrostatic Precipitators written by and published by . This book was released on 1985 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
- Author : Wallace T. Clark
- Publisher :
- Release : 1982
- ISBN :
- Pages : 94 pages
Measurement of the Electrokinetic Transport Properties of Particles in an Electrostatic Precipitator
Download or read book Measurement of the Electrokinetic Transport Properties of Particles in an Electrostatic Precipitator written by Wallace T. Clark and published by . This book was released on 1982 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1988 with total page 1532 pages. Available in PDF, EPUB and Kindle. Book excerpt: