Download or read book Numerical Prediction of Flow Heat Transfer Turbulence and Combustion written by D. Brian Spalding and published by Elsevier. This book was released on 2015-07-14 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Prediction of Flow, Heat Transfer, Turbulence and Combustion: Selected Works of Professor D. Brian Spalding focuses on the many contributions of Professor Spalding on thermodynamics. This compilation of his works is done to honor the professor on the occasion of his 60th birthday. Relatively, the works contained in this book are selected to highlight the genius of Professor Spalding in this field of interest. The book presents various research on combustion, heat transfer, turbulence, and flows. His thinking on separated flows paved the way for the multi-dimensional modeling of turbulence. Arguments on the universality of the models of turbulence and the problems that are associated with combustion engineering are clarified. The text notes the importance of combustion science as well as the problems associated with it. Mathematical computations are also presented in determining turbulent flows in different environments, including on curved pipes, curved ducts, and rotating ducts. These calculations are presented to further strengthen the claims of Professor Spalding in this discipline. The book is a great find for those who are interested in studying thermodynamics.

Download or read book Numerical Prediction of Flow Heat Transfer Turbulence Combustion Selected Works written by Dudley Brian Spalding and published by . This book was released on 1983 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Prediction of Turbulent Oscillating Flow and Associated Heat Transfer written by W. J. Koehler and published by . This book was released on 1991 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Prediction of Fluid Flow and Heat Transfer Under a Turbulent Impinging Slot Jet with Surface Motion and Crossflow written by P. G. Huang and published by . This book was released on 1984 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Prediction of Turbulent Flows written by Geoff Hewitt and published by Cambridge University Press. This book was released on 2005-06-08 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The prediction of turbulent flows is of paramount importance in the development of complex engineering systems involving flow, heat and mass transfer, and chemical reactions. Arising from a programme held at the Isaac Newton Institute in Cambridge, this volume reviews the current situation regarding the prediction of such flows through the use of modern computational fluid dynamics techniques, and attempts to address the inherent problem of modelling turbulence. In particular, the current physical understanding of such flows is summarised and the resulting implications for simulation discussed. The volume continues by surveying current approximation methods whilst discussing their applicability to industrial problems. This major work concludes by providing a specific set of guidelines for selecting the most appropriate model for a given problem. Unique in its breadth and critical approach, this book will be of immense value to experienced practitioners and researchers, continuing the UK's strong tradition in fluid dynamics.

Download or read book Modelling and Simulation of Turbulent Heat Transfer written by B. Sundén and published by WIT Press. This book was released on 2005-02-21 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing invaluable information for both graduate researchers and R & D engineers in industry and consultancy, this book focuses on the modelling and simulation of fluid flow and thermal transport phenomena in turbulent convective flows. Its overall objective is to present state-of-the-art knowledge in order to predict turbulent heat transfer processes in fundamental and idealized flows as well as in engineering applications. The chapters, which are invited contributions from some of the most prominent scientists in this field, cover a wide range of topics and follow a unified outline and presentation to aid accessibility.

Download or read book Numerical Prediction of Turbulent Oscillating Flow and Heat Transfer in Pipes with Various End Geometries written by and published by . This book was released on 1995 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Heat Transfer and Fluid Flow written by Suhas Patankar and published by CRC Press. This book was released on 2018-10-08 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on heat and mass transfer, fluid flow, chemical reaction, and other related processes that occur in engineering equipment, the natural environment, and living organisms. Using simple algebra and elementary calculus, the author develops numerical methods for predicting these processes mainly based on physical considerations. Through this approach, readers will develop a deeper understanding of the underlying physical aspects of heat transfer and fluid flow as well as improve their ability to analyze and interpret computed results.

Download or read book Turbulence Modelling Approaches written by Konstantin Volkov and published by BoD – Books on Demand. This book was released on 2017-07-26 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accurate prediction of turbulent flows remains a challenging task despite considerable work in this area and the acceptance of CFD as a design tool. The quality of the CFD calculations of the flows in engineering applications strongly depends on the proper prediction of turbulence phenomena. Investigations of flow instability, heat transfer, skin friction, secondary flows, flow separation, and reattachment effects demand a reliable modelling and simulation of the turbulence, reliable methods, accurate programming, and robust working practices. The current scientific status of simulation of turbulent flows as well as some advances in computational techniques and practical applications of turbulence research is reviewed and considered in the book.

Download or read book Modeling and Simulation of Turbulent Combustion written by Santanu De and published by Springer. This book was released on 2017-12-12 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review of state-of-the-art models for turbulent combustion, with special emphasis on the theory, development and applications of combustion models in practical combustion systems. It simplifies the complex multi-scale and nonlinear interaction between chemistry and turbulence to allow a broader audience to understand the modeling and numerical simulations of turbulent combustion, which remains at the forefront of research due to its industrial relevance. Further, the book provides a holistic view by covering a diverse range of basic and advanced topics—from the fundamentals of turbulence–chemistry interactions, role of high-performance computing in combustion simulations, and optimization and reduction techniques for chemical kinetics, to state-of-the-art modeling strategies for turbulent premixed and nonpremixed combustion and their applications in engineering contexts.

Download or read book Engineering Turbulence Modelling and Experiments 5 written by W. Rodi and published by Elsevier. This book was released on 2002-08-21 with total page 1029 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence is one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends increasingly on the performance of the turbulence models. This series of symposia provides a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. The papers in this set of proceedings were presented at the 5th International Symposium on Engineering Turbulence Modelling and Measurements in September 2002. They look at a variety of areas, including: Turbulence modelling; Direct and large-eddy simulations; Applications of turbulence models; Experimental studies; Transition; Turbulence control; Aerodynamic flow; Aero-acoustics; Turbomachinery flows; Heat transfer; Combustion systems; Two-phase flows. These papers are preceded by a section containing 6 invited papers covering various aspects of turbulence modelling and simulation as well as their practical application, combustion modelling and particle-image velocimetry.

Download or read book Experiments and Numerical Simulations of Diluted Spray Turbulent Combustion written by Bart Merci and published by Springer Science & Business Media. This book was released on 2011-06-20 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reflects the outcome of the 1st International Workshop on Turbulent Spray Combustion held in 2009 in Corsica (France). The focus is on reporting the progress of experimental and numerical techniques in two-phase flows, with emphasis on spray combustion. The motivation for studies in this area is that knowledge of the dominant phenomena and their interactions in such flow systems is essential for the development of predictive models and their use in combustor and gas turbine design. This necessitates the development of accurate experimental methods and numerical modelling techniques. The workshop aimed at providing an opportunity for experts and young researchers to present the state-of-the-art, discuss new developments or techniques and exchange ideas in the areas of experimentations, modelling and simulation of reactive multiphase flows. The first two papers reflect the contents of the invited lectures, given by experts in the field of turbulent spray combustion. The first concerns computational issues, while the second deals with experiments. These lectures initiated very interesting and interactive discussions among the researchers, further pursued in contributed poster presentations. Contributions 3 and 4 focus on some aspects of the impact of the interaction between fuel evaporation and combustion on spray combustion in the context of gas turbines, while the final article deals with the interaction between evaporation and turbulence.

Download or read book 50 Years of CFD in Engineering Sciences written by Akshai Runchal and published by Springer Nature. This book was released on 2020-03-09 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prof. D. Brian Spalding, working with a small group of students and colleagues at Imperial College, London in the mid-to late-1960’s, single-handedly pioneered the use of Computational Fluid Dynamics (CFD) for engineering practice.​This book brings together advances in computational fluid dynamics in a collection of chapters authored by leading researchers, many of them students or associates of Prof. Spalding. The book intends to capture the key developments in specific fields of activity that have been transformed by application of CFD in the last 50 years. The focus is on review of the impact of CFD on these selected fields and of the novel applications that CFD has made possible. Some of the chapters trace the history of developments in a specific field and the role played by Spalding and his contributions. The volume also includes a biographical summary of Brian Spalding as a person and as a scientist, as well as tributes to Brian Spalding by those whose life was impacted by his innovations. This volume would be of special interest to researchers, practicing engineers, and graduate students in various fields, including aerospace, energy, power and propulsion, transportation, combustion, management of the environment, health and pharmaceutical sciences.

Download or read book Mixed flow Pumps written by Wei Li and published by John Wiley & Sons. This book was released on 2024-06-05 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn to improve and optimize the design and operation of mixed-flow pumps Mixed-flow pumps have a huge range of applications in agriculture, hydroelectric power, and other industries that incorporate fluid transport. They are centrifugal pumps incorporating the characteristics of both axial and radial pumps to increase the flow rate and discharge pressure. Though essential in a variety of industries, they pose serious challenges to numerical simulation methods, challenges which are starting to be met by the application of computational fluid dynamics using high-performance computing. Mixed-flow Pumps introduces engineers and researchers to this subject and its important applications. Incorporating all major varieties of mixed-flow pumps used in industrial applications, it employs methods from advanced computational fluid dynamics and high-precision flow field experimentation to characterize and analyze these crucial technologies. Moving from the fundamentals of the technology to its most advanced applications, it's an essential resource for engineers and industry practitioners looking to develop their understanding of fluid transport. Mixed-flow Pumps readers will also find: Detailed information on how to design and optimize mixed-flow pumps to meet the increasingly stringent industry demands Detailed information on energy performance tests and experiments, methods for data analysis, entropy production theory, CFD solutions using Reynolds-Averaged Navier-Stokes (RANS) equations, and many more An authoritative team with immense global experience in flow pumps and broader industrial experience Mixed-flow Pumps is a useful reference for mixed-flow pump design by academic researchers, including graduate students, industry practitioners, and test engineers.

Download or read book Advances in Fluid and Thermal Engineering written by Basant Singh Sikarwar and published by Springer Nature. This book was released on 2023-07-11 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises the select proceedings of the 3rd Biennial International Conference on Future Learning Aspects of Mechanical Engineering (FLAME-2022). It aims to provide a comprehensive and broad-spectrum picture of state-of-the-art research and development in thermal and fluid engineering. Various topics covered include flow analysis, thermal systems, flow instability, renewable energy, hydel and wind power systems, heat transfer augmentation, biomimetic/ bioinspired engineering, heat pipes, heat pumps, multiphase flow/ heat transfer, energy conversion, thermal hydraulics of nuclear systems, refrigeration, and HVAC systems, computational fluid dynamics, fluid-structure interaction, etc. This volume will prove a valuable resource for those in academia and industry.

Download or read book The numerical prediction of flow and heat transfer in rod bundle geometries written by V. K. Ramachandra and published by . This book was released on 1979 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Process Intensification written by Mirko Skiborowski and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-10-03 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process intensification aims for increasing efficiency and sustainability of (bio-)chemical production processes. The second book of our two-book series focusses entirely on process intensifi cation by centrifugally enhanced (reactive) separations. The book provides an overview of the main applications of rotating packed beds (RPBs) in liquid-liquid, gas-liquid and vapor-liquid contacting, within academic research and industrial applications. The book addresses current design rules and modeling frameworks, including the tailored design of functional packings by means of additive manufacturing. Rotating packed beds are widely applicable and fl exible mass transfer machines for process intensifi cation. Applications, design rules and advanced modeling for rotating packed beds are presented in an interconnected way.