Download or read book Thermodynamic Models for Industrial Applications written by Georgios M. Kontogeorgis and published by John Wiley & Sons. This book was released on 2009-12-01 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using an applications perspective Thermodynamic Models for Industrial Applications provides a unified framework for the development of various thermodynamic models, ranging from the classical models to some of the most advanced ones. Among these are the Cubic Plus Association Equation of State (CPA EoS) and the Perturbed Chain Statistical Association Fluid Theory (PC-SAFT). These two advanced models are already in widespread use in industry and academia, especially within the oil and gas, chemical and polymer industries. Presenting both classical models such as the Cubic Equations of State and more advanced models such as the CPA, this book provides the critical starting point for choosing the most appropriate calculation method for accurate process simulations. Written by two of the developers of these models, Thermodynamic Models for Industrial Applications emphasizes model selection and model development and includes a useful “which model for which application” guide. It also covers industrial requirements as well as discusses the challenges of thermodynamics in the 21st Century.

Download or read book Organic Rankine Cycle ORC Power Systems written by Ennio Macchi and published by Woodhead Publishing. This book was released on 2016-08-24 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic Rankine Cycle (ORC) Power Systems: Technologies and Applications provides a systematic and detailed description of organic Rankine cycle technologies and the way they are increasingly of interest for cost-effective sustainable energy generation. Popular applications include cogeneration from biomass and electricity generation from geothermal reservoirs and concentrating solar power installations, as well as waste heat recovery from gas turbines, internal combustion engines and medium- and low-temperature industrial processes. With hundreds of ORC power systems already in operation and the market growing at a fast pace, this is an active and engaging area of scientific research and technical development. The book is structured in three main parts: (i) Introduction to ORC Power Systems, Design and Optimization, (ii) ORC Plant Components, and (iii) Fields of Application. - Provides a thorough introduction to ORC power systems - Contains detailed chapters on ORC plant components - Includes a section focusing on ORC design and optimization - Reviews key applications of ORC technologies, including cogeneration from biomass, electricity generation from geothermal reservoirs and concentrating solar power installations, waste heat recovery from gas turbines, internal combustion engines and medium- and low-temperature industrial processes - Various chapters are authored by well-known specialists from Academia and ORC manufacturers

Download or read book Simulations and Optical Diagnostics for Internal Combustion Engines written by Akhilendra Pratap Singh and published by Springer Nature. This book was released on 2019-10-11 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on combustion simulations and optical diagnostics techniques, which are currently used in internal combustion engines. The book covers a variety of simulation techniques, including in-cylinder combustion, numerical investigations of fuel spray, and effects of different fuels and engine technologies. The book includes chapters focused on alternative fuels such as DEE, biomass, alcohols, etc. It provides valuable information about alternative fuel utilization in IC engines. Use of combustion simulations and optical techniques in advanced techniques such as microwave-assisted plasma ignition, laser ignition, etc. are few other important aspects of this book. The book will serve as a valuable resource for academic researchers and professional automotive engineers alike.

Download or read book Liquid Vapor Phase Change Phenomena written by Van P. Carey and published by CRC Press. This book was released on 2018-05-02 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid-Vapor Phase-Change Phenomena presents the basic thermophysics and transport principles that underlie the mechanisms of condensation and vaporization processes. The text has been thoroughly updated to reflect recent innovations in research and to strengthen the fundamental focus of the first edition. Starting with an integrated presentation of the nonequilibrium thermodynamics and interfacial phenomena associated with vaporization and condensation, coverage follows of the heat transfer and fluid flow mechanisms in such processes. The second edition includes significant new material on the nanoscale and microscale thermophysics of boiling and condensation phenomena and the use of advanced computational tools to create new models of phase-change events. The importance of basic phenomena to a wide variety of applications is emphasized and illustrated throughout using examples and problems. Suitable for senior undergraduate and first-year graduate students in mechanical or chemical engineering, the book can also be a helpful reference for practicing engineers or scientists studying the fundamental physics of nucleation, boiling and condensation.

Download or read book Industrial High Pressure Applications written by Rudolf Eggers and published by John Wiley & Sons. This book was released on 2012-07-11 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial high pressure processes open the door to many reactions that are not possible under 'normal' conditions. These are to be found in such different areas as polymerization, catalytic reactions, separations, oil and gas recovery, food processing, biocatalysis and more. The most famous high pressure process is the so-called Haber-Bosch process used for fertilizers and which was awarded a Nobel prize. Following an introduction on historical development, the current state, and future trends, this timely and comprehensive publication goes on to describe different industrial processes, including methanol and other catalytic syntheses, polymerization and renewable energy processes, before covering safety and equipment issues. With its excellent choice of industrial contributions, this handbook offers high quality information not found elsewhere, making it invaluable reading for a broad and interdisciplinary audience.

Download or read book Thermodynamics written by William C. Reynolds and published by Cambridge University Press. This book was released on 2018-09-20 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an essential treatment of the subject and rigorous methods to solve all kinds of energy engineering problems.

Download or read book Hydrodynamics of Pumps written by Christopher E. Brennen and published by Cambridge University Press. This book was released on 2011-03-28 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamics of Pumps is a reference for pump experts and a textbook for advanced students. It examines the fluid dynamics of liquid turbomachines, particularly pumps, focusing on special problems and design issues associated with the flow of liquid through a rotating machine. There are two characteristics of a liquid that lead to problems and cause a significantly different set of concerns than those in gas turbines. These are the potential for cavitation and the high density of liquids, which enhances the possibility of damaging, unsteady flows and forces. The book begins with an introduction to the subject, including cavitation, unsteady flows and turbomachinery, basic pump design and performance principles. Chapter topics include flow features, cavitation parameters and inception, bubble dynamics, cavitation effects on pump performance, and unsteady flows and vibration in pumps - discussed in the three final chapters. The book is richly illustrated and includes many practical examples.

Download or read book Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction written by Ki-Han Kim and published by Springer. This book was released on 2014-07-08 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive treatment of the cavitation erosion phenomenon and state-of-the-art research in the field. It is divided into two parts. Part 1 consists of seven chapters, offering a wide range of computational and experimental approaches to cavitation erosion. It includes a general introduction to cavitation and cavitation erosion a detailed description of facilities and measurement techniques commonly used in cavitation erosion studies, an extensive presentation of various stages of cavitation damage (including incubation and mass loss) and insights into the contribution of computational methods to the analysis of both fluid and material behavior. The proposed approach is based on a detailed description of impact loads generated by collapsing cavitation bubbles and a physical analysis of the material response to these loads. Part 2 is devoted to a selection of nine papers presented at the International Workshop on Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction (Grenoble, France, 1-2 March 2011) representing the forefront of research on cavitation erosion. Innovative numerical and experimental investigations illustrate the most advanced breakthroughs in cavitation erosion research.

Download or read book On the Continuity of the Gaseous and Liquid States written by J. D. Van Der Waals and published by Courier Corporation. This book was released on 2004-01-01 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This much-cited thesis by J. D. van der Waals, the recipient of the 1910 Nobel Prize in physics, is accompanied by an introductory essay by J. S. Rowlinson and another work by van der Waals on the theory of liquid mixtures. 1988 edition.

Download or read book Production Handling and Characterization of Particulate Materials written by Henk G. Merkus and published by Springer. This book was released on 2015-11-26 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume presents most techniques and methods that have been developed by material scientists, chemists, chemical engineers and physicists for the commercial production of particulate materials, ranging from the millimeter to the nanometer scale. The scope includes the physical and chemical background, experimental optimization of equipment and procedures, as well as an outlook on future methods. The books addresses issues of industrial importance such as specifications, control parameter(s), control strategy, process models, energy consumption and discusses the various techniques in relation to potential applications. In addition to the production processes, all major unit operations and characterization methods are described in this book. It differs from other books which are devoted to a single technique or a single material. Contributors to this book are acknowledged experts in their field. The aim of the book is to facilitate comparison of the different unit operations leading to optimum equipment choices for the production, handling and storage of particulate materials. An advantage of this approach is that unit operations that are common in one field of application are made accessible to other fields. The overall focus is on industrial application and the book includes some concrete examples. The book is an essential resource for students or researchers who work in collaboration with manufacturing industries or who are planning to make the switch from academia to industry.

Download or read book Direct Numerical Simulations of Gas Liquid Multiphase Flows written by Grétar Tryggvason and published by Cambridge University Press. This book was released on 2011-03-10 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accurately predicting the behaviour of multiphase flows is a problem of immense industrial and scientific interest. Modern computers can now study the dynamics in great detail and these simulations yield unprecedented insight. This book provides a comprehensive introduction to direct numerical simulations of multiphase flows for researchers and graduate students. After a brief overview of the context and history the authors review the governing equations. A particular emphasis is placed on the 'one-fluid' formulation where a single set of equations is used to describe the entire flow field and interface terms are included as singularity distributions. Several applications are discussed, showing how direct numerical simulations have helped researchers advance both our understanding and our ability to make predictions. The final chapter gives an overview of recent studies of flows with relatively complex physics, such as mass transfer and chemical reactions, solidification and boiling, and includes extensive references to current work.

Download or read book OpenFOAM written by J. Miguel Nóbrega and published by Springer. This book was released on 2019-01-24 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected papers of the 11th OpenFOAM® Workshop that was held in Guimarães, Portugal, June 26 - 30, 2016. The 11th OpenFOAM® Workshop had more than 140 technical/scientific presentations and 30 courses, and was attended by circa 300 individuals, representing 180 institutions and 30 countries, from all continents. The OpenFOAM® Workshop provided a forum for researchers, industrial users, software developers, consultants and academics working with OpenFOAM® technology. The central part of the Workshop was the two-day conference, where presentations and posters on industrial applications and academic research were shown. OpenFOAM® (Open Source Field Operation and Manipulation) is a free, open source computational toolbox that has a larger user base across most areas of engineering and science, from both commercial and academic organizations. As a technology, OpenFOAM® provides an extensive range of features to solve anything from complex fluid flows involving chemical reactions, turbulence and heat transfer, to solid dynamics and electromagnetics, among several others. Additionally, the OpenFOAM technology offers complete freedom to customize and extend its functionalities.

Download or read book The Fundamentals of Process Intensification written by Andrzej Stankiewicz and published by John Wiley & Sons. This book was released on 2019-06-13 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: This advanced textbook covering the fundamentals and industry applications of process intensification (PI) discusses both the theoretical and conceptual basis of the discipline. Since interdisciplinarity is a key feature of PI, the material contained in the book reaches far beyond the classical area of chemical engineering. Developments in other relevant disciplines, such as chemistry, catalysis, energy technology, applied physics, electronics and materials science, are extensively described and discussed, while maintaining a chemical engineering perspective. Divided into three major parts, the first introduces the PI principles in detail and illustrates them using practical examples. The second part is entirely devoted to fundamental approaches of PI in four domains: spatial, thermodynamic, functional and temporal. The third and final part explores the methodology for applying fundamental PI approaches in practice. As well as detailing technologies, the book focuses on safety, energy and environmental issues, giving guidance on how to incorporate PI in plant design and operation -- safely, efficiently and effectively.

Download or read book Fuels and Fuel Additives written by S. P. Srivastava and published by John Wiley & Sons. This book was released on 2014-01-16 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines all stages of fuel production, from feedstocks to finished products Exploring chemical structures and properties, this book sheds new light on the current science and technology of producing energy efficient and environmentally friendly fuels. Moreover, it explains the role of fuel-additives in the production cycle. This expertly written and organized guide to fuels and fuel-additives also presents requirements, rules and regulations, including US and EU standards governing automotive emissions, fuel quality and specifications, alternate fuels, biofuels, antioxidants, deposit control detergents/dispersants, stabilizers, corrosion inhibitors, and polymeric fuel-additives. Fuels and Fuel-Additives covers all stages and facets of the production of engine fuels as well as heating and fuel oils. The book begins with a quick portrait of the future of fuels and fuel production. Then, it sets forth the regulations controlling exhaust gas emissions and fuel quality from around the world. Next, the book covers: Processing of engine fuels derived from crude oil, including the production of blending components Production of alternative fuels Fuel-additives for automotive engines Blending of fuels Key properties of motor fuels and their effects on engines and the environment Aviation fuels The final chapter of the book deals with fuel oils and marine fuels. Each chapter is extensively referenced, providing a gateway to the primary and secondary literature in the field. At the end of the book, a convenient glossary defines all the key terms used in the book. Examining the full production cycle from feedstocks to final products, Fuels and Fuel-Additives is recommended for students, engineers, and scientists working in fuels and energy production.

Download or read book Process Engineering and Chemical Plant Design 2011 written by Günter Wozny and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cryogenic Mixed Refrigerant Processes written by Gadhiraju Venkatarathnam and published by Springer Science & Business Media. This book was released on 2008-12-10 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most conventional cryogenic refrigerators and liquefiers operate with pure fluids, the major exception being natural gas liquefiers that use mixed refrigerant processes. The fundamental aspects of mixed refrigerant processes, though very innovative, have not received the due attention in open literature in view of commercial interests. Hundreds of patents exist on different aspects of mixed refrigerant processes. However, it is difficult to piece together the existing information to choose an appropriate process and an optimum composition or a given application. The aim of the book is to teach (a.) the need for refrigerant mixtures, (b.) the type of mixtures that can be used for different refrigeration and liquefaction applications, (c.) the different processes that can be used and (d.) the methods to be adopted for choosing the components of a mixture and their concentration for different applications.

Download or read book Fuel Systems for IC Engines written by Institution of Mechanical Engineers and published by Elsevier. This book was released on 2012-03-06 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the papers from the latest conference in this successful series on fuel injection systems for internal combustion engines. It is vital for the automotive industry to continue to meet the demands of the modern environmental agenda. In order to excel, manufacturers must research and develop fuel systems that guarantee the best engine performance, ensuring minimal emissions and maximum profit. The papers from this unique conference focus on the latest technology for state-of-the-art system design, characterisation, measurement, and modelling, addressing all technological aspects of diesel and gasoline fuel injection systems. Topics range from fundamental fuel spray theory, component design, to effects on engine performance, fuel economy and emissions. - Presents the papers from the IMechE conference on fuel injection systems for internal combustion engines - Papers focus on the latest technology for state-of-the-art system design, characterisation, measurement and modelling; addressing all technological aspects of diesel and gasoline fuel injection systems - Topics range from fundamental fuel spray theory and component design to effects on engine performance, fuel economy and emissions