Download or read book Building Response to Tunnelling written by Construction Industry Research and Information Association and published by Thomas Telford. This book was released on 2001 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability to predict the potential damage to buildings accurately and to have confidence in the chosen protective measures is of increasing importance for the viability of urban tunnelling. The Jubilee Line Extension Project (JLEP) presented a unique opportunity to capture reliable field measurements of the effects of tunnelling on a wide range of buildings. Building response to tunnelling: Case studies from the Jubilee Line Extension, London is the result of this work. Volume 1 describes the relevant part of the JLEP, the methods of settlement prediction and building damage assessment used on the project, and the objectives of the research. Further chapters provide accounts of the geology and historical development of more of the case study buildings (between Green Park and Canada Water stations of the JLE route). Full transcriptions are included of the before-the-event and independent best practice predictions of surface and at-depth ground movements at two greenfield sites and the settlement of four buildings, which were made specially for the research. The concluding chapter of Volume 1, written by Professor John Burland, presents the overall findings of the research to date. Volume 2 presents, in their geographical sequence, the twenty-seven case studies; from Green Park in the west to London Bridge, and then eastward to Canada Water station. These case studies include two instrumented greenfield sites and several examples of prestigious buildings in London's west end that were protected by compensation grouting. The case studies present descriptions of the buildings, the works that affected them and measurements made to record their response. This valuable and informative two volume book has been written by the experts who participated in the research and is generously illustrated with numerous line drawings, graphs, pictures and maps. Building response to tunnelling: Case studies from the jubilee Line Extension, London will be essential reading to tunnelling and geotechnical engineers and all those who have an interest in this successful and interesting underground project.
Download or read book Numerical Modelling of Building Response to Tunnelling written by John Anthony Pickhaver and published by . This book was released on 2006 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Modelling of Tunnelling Processes for Assessment of Damage to Buildings written by Charles Edward Augarde and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Building Response to Tunnelling written by J. B. Burland and published by Thomas Telford Publishing. This book was released on 2001 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1 : The project - Introduction - Structures and contracts of the Jubilee Line Extension - Assessment methods used in design - The LINK-CMR research project - Geology and geotechnical properties - St James's and St James's Park: A brief history of their development - Westminster and Waterloo areas - The London Bridge station area - Bermondsey and Rotherhithe - Tunnelling methods - Protective measures - Finite element analysis of St Jame's Park greenfield site - Finite element analyses of ground movements from tunnelling below Southwark Park - Elizabeth House:Settlement predictions - Settlement predictions for Nepturne, Murdock, and Clegg Houses and adjacent masonry walls - JLE Construction works at London Bridge station - Some aspects of construction on JLE Contracts 105 and 106 - Measurement techniques and accuracy - Data handling and storage - Grouting intensities - Results of the research Volume 2: Case studies - This volume presents the twenty-seven case studies including internationally renowned buildings such as the Big Ben clock Tower, other high profile buildings such as the Treasury building, the Ritz Hotel and the RAC building, plus many commercial and residential properties which are typical of the building stock worldwide
Download or read book Numerical Simulation in Tunnelling written by Gernot Beer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the results of the joint research initiative "Numercial Simulation in Tunneling". In doing so it provides a thorough guide to improving the safety and economy of tunnels by discussing the application of numerical simulation methods to assist tunnel engineers. Numerical simulation tools for the estimation of the required tunnel support and the required construction measures are described in this book. By using them, it is possible to study the impact on the construction and on the environment at the planning stadium and during construction. This will result in an improvement of the safety and economy of tunnels.
Download or read book Geotechnical Aspects of Underground Construction in Soft Ground written by Arsenio Negro and published by CRC Press. This book was released on 2017-11-23 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical Aspects of Underground Construction in Soft Ground comprises the second Fujita lecture, three keynote lectures and the regular papers presented at the Ninth International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground (IS - Sao Paulo 2017, Sao Paulo, Brazil, 4-6 April 2017). The Symposium was organized by the Brazilian Tunnelling Committee (CBT) of the Brazilian Geotechnical Society (ABMS), under the auspices of the Technical Committee TC204 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). The contributions cover a wide range of topics: - Deep Excavations - Interaction with Adjacent Structures - Mechanized Excavations - Sequential Excavations - Physical Modelling and Field Tests - Case Histories Geotechnical Aspects of Underground Construction in Soft Ground is particularly aimed at academics and professionals interested or involved in geotechnical and underground engineering. Similarly to previous editions, the contributions are a valuable source of reference on the current practice on the analysis, design and construction of tunnels, deep excavations and large underground structures, with particular emphasis on the development, effects and control of ground movements, their interaction with existing structures, mitigation measures and risk management. IS - Sao Paulo 2017 is the latest in a series of ISSMGE’s TC204 symposia, which began in New Delhi (1993), followed by symposia in London (1996), Tokyo (1999), Toulouse (2002), Amsterdam (2005), Shanghai (2008), Rome (2011) and Seoul (2014).
Download or read book Handbook on Tunnels and Underground Works written by Emilio Bilotta and published by CRC Press. This book was released on 2024-10-31 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book set provides a new, global, updated, thorough, clear, and practical risk-based approach to tunnelling design and construction methods, and discusses detailed examples of solutions applied to relevant case histories. It is organized in three sequential and integrated volumes: Volume 1: Concept – Basic Principles of Design Volume 2: Construction – Methods, Equipment, Tools and Materials Volume 3: Case Histories and Best Practices This book covers all aspects of tunnelling, giving useful and practical information about design (Vol. 1), construction (Vol. 2), and best practices (Vol. 3). It provides the following features and benefits: updated vision on tunnelling design, tools, materials, and construction balanced mix of theory, technology, and applied experience different and harmonized points of view from academics, professionals, and contractors easy consultation in the form of a handbook risk-oriented approach to tunnelling problems. The tunnelling industry is amazingly widespread and increasingly important all over the world, particularly in developing countries. The possible audience of this book are engineers, geologists, designers, constructors, providers, contractors, public and private customers, and, in general, technicians involved in the tunnelling and underground works industry. It is also a suitable source of information for industry professionals, senior undergraduate and graduate students, researchers, and academics.
Download or read book Numerical Modelling of Construction Processes in Geotechnical Engineering for Urban Environment written by Theodoros Triantafyllidis and published by CRC Press. This book was released on 2006-02-23 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: These are the Proceedings of the International Converence on Numerical Modelling of Construction Processses in Geotechnical Engineering for the Urban Environment, Bochum Germany, March 2006.
Download or read book Geotechnical Aspects of Underground Construction in Soft Ground written by Klaas Jan Bakker and published by CRC Press. This book was released on 2013-05-23 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: A valuable source of reference on the current practices of analysis, design and construction of tunnels and underground structures in soft ground. This collection of reviewed papers covers a wide range of tunnelling practice, from deep excavations in Singapore to the construction of a new metro line in Barcelona. The international scope of the contributors makes this a truly comprehensive collection of work on the geotechnical aspects of soft ground excavation.
Download or read book Analytical Methods in Petroleum Upstream Applications written by Cesar Ovalles and published by CRC Press. This book was released on 2015-04-02 with total page 1351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective measurement of the composition and properties of petroleum is essential for its exploration, production, and refining; however, new technologies and methodologies are not adequately documented in much of the current literature. Analytical Methods in Petroleum Upstream Applications explores advances in the analytical methods and instrumentation that allow more accurate determination of the components, classes of compounds, properties, and features of petroleum and its fractions. Recognized experts explore a host of topics, including: A petroleum molecular composition continuity model as a context for other analytical measurements A modern modular sampling system for use in the lab or the process area to collect and control samples for subsequent analysis The importance of oil-in-water measurements and monitoring The chemical and physical properties of heavy oils, their fractions, and products from their upgrading Analytical measurements using gas chromatography and nuclear magnetic resonance (NMR) applications Asphaltene and heavy ends analysis Chemometrics and modeling approaches for understanding petroleum composition and properties to improve upstream, midstream, and downstream operations Due to the renaissance of gas and oil production in North America, interest has grown in analytical methods for a wide range of applications. The understanding provided in this text is designed to help chemists, geologists, and chemical and petroleum engineers make more accurate estimates of the crude value to specific refinery configurations, providing insight into optimum development and extraction schemes.
Download or read book Challenges and Innovations in Geomechanics written by Marco Barla and published by Springer Nature. This book was released on 2021-01-14 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of computational geomechanics, as presented by international researchers and engineers at the 16th International Conference of the International Association for Computer Methods and Advances in Geomechanics (IACMAG 2020/21). Contributions include a wide range of topics in geomechanics such as: monitoring and remote sensing, multiphase modelling, reliability and risk analysis, surface structures, deep structures, dams and earth structures, coastal engineering, mining engineering, earthquake and dynamics, soil-atmosphere interaction, ice mechanics, landfills and waste disposal, gas and petroleum engineering, geothermal energy, offshore technology, energy geostructures, geomechanical numerical models and computational rail geotechnics.
Download or read book Geotechnical Aspects of Underground Construction in Soft Ground written by Mohammed Elshafie and published by CRC Press. This book was released on 2021-05-10 with total page 877 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical Aspects of Underground Construction in Soft Ground comprises a collection of 112 papers, the Fujita Lecture, three Special Lectures and the Bright Spark Lecture presented at the Tenth International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, held in Cambridge, United Kingdom, 27-29 June 2022. This second edition includes four general reports on the symposium themes. The symposium is the latest in a series which began in New Delhi in 1994, and was followed by symposia in London (1996), Tokyo (1999), Toulouse (2002), Amsterdam (2005), Shanghai (2008), Rome (2011), Seoul (2014) and Sao Paulo (2017). This was organised by the Geotechnical Research Group at the University of Cambridge, under the auspices of the Technical Committee TC204 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). Geotechnical Aspects of Underground Construction in Soft Ground includes contributions from more than 25 countries on research, design and construction of underground works in soft ground. The contributions cover: Field case studies Sensing technologies and monitoring for underground construction in soft ground Physical and numerical modelling of tunnels and deep excavations in soft ground Seismic response of underground infrastructure in soft ground Design and application of ground improvement for underground construction Ground movements, interaction with existing structures and mitigation measures The general reports give an overview of the papers submitted to the symposium, covered in four technical sessions. The proceedings include the written version of the five invited lectures covering topics ranging from developments in geotechnical aspects of underground construction, tunnelling and groundwater interaction (short and long-term effects), the influence of earth pressure balance shield tunnelling on pre-convergence and segmental liner loading (field observations, modelling and implications on design). Similar to previous editions, Geotechnical Aspects of Underground Construction in Soft Ground represents a valuable source of reference on the current practice of analysis, design, and construction of tunnels and deep excavations in soft ground. The book is particularly aimed at academics and professionals interested in geotechnical and underground engineering.
Download or read book Numerical Methods in Geotechnical Engineering IX written by António S. Cardoso and published by CRC Press. This book was released on 2018-06-19 with total page 1656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering.
Download or read book Structural Analysis of Historical Constructions Anamnesis Diagnosis Therapy Controls written by Koen Van Balen and published by CRC Press. This book was released on 2016-11-03 with total page 2968 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Analysis of Historical Constructions. Anamnesis, diagnosis, therapy, controls contains the papers presented at the 10th International Conference on Structural Analysis of Historical Constructions (SAHC2016, Leuven, Belgium, 13-15 September 2016). The main theme of the book is “Anamnesis, Diagnosis, Therapy, Controls”, which emphasizes the importance of all steps of a restoration process in order to obtain a thorough understanding of the structural behaviour of built cultural heritage. The contributions cover every aspect of the structural analysis of historical constructions, such as material characterization, structural modelling, static and dynamic monitoring, non-destructive techniques for on-site investigation, seismic behaviour, rehabilitation, traditional and innovative repair techniques, and case studies. A special focus has been put on six specific themes: - Innovation and heritage - Preventive conservation - Computational strategies for heritage structures - Sustainable strengthening of masonry with composites - Values and sustainability, and - Subsoil interaction The knowledge, insights and ideas in Structural Analysis of Historical Constructions. Anamnesis, diagnosis, therapy, controls make this book of abstracts and the corresponding, digital full-colour conference proceedings containing the full papers must-have literature for researchers and practitioners involved in the structural analysis of historical constructions.
Download or read book Numerical Methods in Geotechnical Engineering IX Volume 2 written by António S. Cardoso and published by CRC Press. This book was released on 2018-06-27 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering. This is volume 2 of the NUMGE 2018 set.
Download or read book Tunnels and Underground Cities Engineering and Innovation Meet Archaeology Architecture and Art written by Daniele Peila and published by CRC Press. This book was released on 2019-04-17 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tunnels and Underground Cities: Engineering and Innovation meet Archaeology, Architecture and Art contains the contributions presented at the World Tunnel Congress 2019 (Naples, Italy, 3-9 May 2019). The use of underground space is continuing to grow, due to global urbanization, public demand for efficient transportation, and energy saving, production and distribution. The growing need for space at ground level, along with its continuous value increase and the challenges of energy saving and achieving sustainable development objectives, demand greater and better use of the underground space to ensure that it supports sustainable, resilient and more liveable cities. This vision was the source of inspiration for the design of the logos of both the International (ITA) and Italian (SIG) Tunnelling Association. By placing key infrastructures underground – the black circle in the logos – it will be possible to preserve and enhance the quality of the space at ground level – the green line. In order to consider and value underground space usage together with human and social needs, engineers, architects, and artists will have to learn to collaborate and develop an interdisciplinary design approach that addresses functionality, safety, aesthetics and quality of life, and adaptability to future and varied functions. The 700 contributions cover a wide range of topics, from more traditional subjects connected to technical challenges of design and construction of underground works, with emphasis on innovation in tunneling engineering, to less conventional and archetypically Italian themes such as archaeology, architecture, and art. The book has the following main themes: Archaeology, Architecture and Art in underground construction; Environment sustainability in underground construction; Geological and geotechnical knowledge and requirements for project implementation; Ground improvement in underground constructions; Innovation in underground engineering, materials and equipment; Long and deep tunnels; Public communication and awareness; Risk management, contracts and financial aspects; Safety in underground construction; Strategic use of underground space for resilient cities; Urban tunnels. Tunnels and Underground Cities: Engineering and Innovation meet Archaeology, Architecture and Art is a valuable reference text for tunneling specialists, owners, engineers, architects and others involved in underground planning, design and building around the world, and for academics who are interested in underground constructions and geotechnics.
Download or read book Numerical Modelling written by Peep Miidla and published by BoD – Books on Demand. This book was released on 2012-03-23 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates applications and case studies performed by experts for professionals and students in the field of technology, engineering, materials, decision making management and other industries in which mathematical modelling plays a role. Each chapter discusses an example and these are ranging from well-known standards to novelty applications. Models are developed and analysed in details, authors carefully consider the procedure for constructing a mathematical replacement of phenomenon under consideration. For most of the cases this leads to the partial differential equations, for the solution of which numerical methods are necessary to use. The term Model is mainly understood as an ensemble of equations which describe the variables and interrelations of a physical system or process. Developments in computer technology and related software have provided numerous tools of increasing power for specialists in mathematical modelling. One finds a variety of these used to obtain the numerical results of the book.
