Download or read book Numerical Methods in Geomechanics Volume 1 written by G. Swoboda and published by Routledge. This book was released on 2017-11-01 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 2017. Routledge is an imprint of Taylor & Francis, an Informa company.

Download or read book Innovative Numerical Modelling in Geomechanics written by Luis Ribeiro e Sousa and published by CRC Press. This book was released on 2012-05-03 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1990s five books onApplications of Computational Mechanics in Geotechnical Engineering have been published. Innovative Numerical Modelling in Geomechanics is the 6th and final book in this series, and contains papers written by leading experts on computational mechanics. The book treats highly relevant topics in the field of geotechnic

Download or read book XAFS for Everyone written by Scott Calvin and published by CRC Press. This book was released on 2013-05-20 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: XAFS for Everyone provides a practical, thorough guide to x-ray absorption fine-structure (XAFS) spectroscopy for both novices and seasoned practitioners from a range of disciplines. The text is enhanced with more than 200 figures as well as cartoon characters who offer informative commentary on the different approaches used in XAFS spectroscopy. The book covers sample preparation, data reduction, tips and tricks for data collection, fingerprinting, linear combination analysis, principal component analysis, and modeling using theoretical standards. It describes both near-edge (XANES) and extended (EXAFS) applications in detail. Examples throughout the text are drawn from diverse areas, including materials science, environmental science, structural biology, catalysis, nanoscience, chemistry, art, and archaeology. In addition, five case studies from the literature demonstrate the use of XAFS principles and analysis in practice. The text includes derivations and sample calculations to foster a deeper comprehension of the results. Whether you are encountering this technique for the first time or looking to hone your craft, this innovative and engaging book gives you insight on implementing XAFS spectroscopy and interpreting XAFS experiments and results. It helps you understand real-world trade-offs and the reasons behind common rules of thumb.

Download or read book Analytic Methods in Geomechanics written by Kam-tim Chau and published by CRC Press. This book was released on 2018-10-08 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: A multidisciplinary field, encompassing both geophysics and civil engineering, geomechanics deals with the deformation and failure process in geomaterials such as soil and rock. Although powerful numerical tools have been developed, analytical solutions still play an important role in solving practical problems in this area. Analytic Methods in Geomechanics provides a much-needed text on mathematical theory in geomechanics, beneficial for readers of varied backgrounds entering this field. Written for scientists and engineers who have had some exposure to engineering mathematics and strength of materials, the text covers major topics in tensor analysis, 2-D elasticity, and 3-D elasticity, plasticity, fracture mechanics, and viscoelasticity. It also discusses the use of displacement functions in poroelasticity, the basics of wave propagations, and dynamics that are relevant to the modeling of geomaterials. The book presents both the fundamentals and more advanced content for understanding the latest research results and applying them to practical problems in geomechanics. The author gives concise explanations of each subject area, using a step-by-step process with many worked examples. He strikes a balance between breadth of material and depth of details, and includes recommended reading in each chapter for readers who would like additional technical information. This text is suitable for students at both undergraduate and graduate levels, as well as for professionals and researchers.

Download or read book Numerical Methods in Geotechnical Engineering written by Helmut F. Schweiger and published by CRC Press. This book was released on 2006-08-17 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of recent developments in constitutive modelling, numerical implementation issues, and coupled and dynamic analysis. There is a special section dedicated to the numerical modelling of ground improvement techniques, with applications of numerical methods for solving practical boundary value problems, such as deep excavations, tunne

Download or read book Numerical Methods and Implementation in Geotechnical Engineering Part 2 written by Y.M. Cheng and published by Bentham Science Publishers. This book was released on 2020-04-20 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods and Implementation in Geotechnical Engineering explains several numerical methods that are used in geotechnical engineering. The second part of this reference set includes more information on the distinct element method, geotechnical optimization analysis and reliability analysis. Information about relevant additional numerical methods is also provided in each chapter with problems where applicable. The authors have also presented different computer programs associated with the materials in this book set which will be useful to students learning how to apply the models explained in the text into practical situations when designing structures in locations with specific soil and rock settings. This reference book set is a suitable textbook primer for civil engineering students as it provides a basic introduction to different numerical methods (classical and modern) in comprehensive readable volumes.

Download or read book Numerical Analysis and Modelling in Geomechanics written by John W. Bull and published by CRC Press. This book was released on 2003-04-17 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: In geomechanics, existing design methods are very much dependent upon sophisticated on-site techniques to assess ground conditions. This book describes numerical analysis, computer simulation and modelling that can be used to answer some highly complex questions associated with geomechanics. The contributors, who are all international experts in th

Download or read book Mechanics of Jointed and Faulted Rock written by H.P. Rossmanith and published by CRC Press. This book was released on 2020-12-17 with total page 1011 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the implementation and application of new concepts and methods to modelling, analysis, building, performance control and repair of structures of and in jointed rock and rock masses. It provides a forum for presentation of new research results and discussion for researchers.

Download or read book Proceedings of the Second International Conference on Press in Engineering 2021 Kochi Japan written by Tatsunori Matsumoto and published by CRC Press. This book was released on 2021-06-24 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second International Conference on Press-in Engineering (ICPE) 2021 was organized by the International Press-in Association (IPA). The conference is held every three years and the main theme this time is "Evolution and Social Contribution of Press-in Engineering for Infrastructure Development, and Disaster Prevention and Mitigation". These proceedings contain 2 keynote lectures, 3 state-of-the-art lectures and about 60 papers from more than 10 countries. This publication provides good practice guidance on the application of the press-in piling method, to satisfy the requirements of geo-structures which are embedded utilizing prefabricated piles. It covers actual examples of the press-in piling method applied to various geo-structures, such as temporary and permanent retaining walls, cofferdams, cut-off walls, foundation piles etc. The content addresses the technical and construction issues relating to the selection of the appropriate type of press-in piling method, in accordance with required structural design criteria and soil and working conditions. The aim of this publication is to concisely describe practical uses of the press-in piling method for project owners, designers, contractors, academic researchers and other people in the construction industry.

Download or read book Barrier Systems for Waste Disposal Facilities written by J.R. Booker and published by CRC Press. This book was released on 2004-06-03 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: The protection of groundwater and surface water from contamination by the escape of contaminant from waste disposal is now an important consideration in many countries of the world.This book deals with the design of 'barrier systems' which separate waste from the surrounding environment and which are intended to prevent contamination of both ground

Download or read book Pressuremeters in Geotechnical Design written by B.G. Clarke and published by CRC Press. This book was released on 2022-11-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The pressuremeter is a versatile piece of ground investigation equipment that can be used to test any type of soil or rock in situ. It quantifies in-situ stress, stiffness, strength and permeability – the essential properties needed to design geotechnical structures. The results are used in pressuremeter specific design methods, empirical design methods and numerical analyses. This reference book covers the types of pressuremeter and the control equipment, methods of installation, test procedures, methods of analysis including direct and indirect methods of interpretation, and application in design. This is supported by an exemplar specification for field operations with the interpretation of the results. Engineers are given enough detail to apply the results confidently. This comprehensive and thorough discussion of pressuremeter testing in geotechnical design draws on over forty years’ experience in geotechnical engineering. It is essential for professional and academic engineering geologists and geotechnical, civil and structural engineers involved in ground investigation and geotechnical design.

Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Deep Braced Excavation in Urban Geotechnical Environments written by Wengang Zhang and published by Elsevier. This book was released on 2024-05-21 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Deep Braced Excavation in Urban Geotechnical Environments presents the design and calculation of deep braced excavation in urban geotechnical environments considering the soil characteristics of spatial variability and anisotropy, as well as excavation responses of urban adjacent utilities such as pipelines, tunnels, foundation piles and buildings. With economic development and further urbanization, excavation goes deeper, longer, and larger in scale. These conditions require advanced analysis and design methods. The text begins with coverage of overall stability, earth pressure and strut force, retaining wall responses, and ground movements. Numerical modeling and computer codes are outlined in detail. The authors then take a close look at the design of jet grouting for deformation control, instrumentation and back analysis for excavation, and the characteristics of deep braced excavation in complex geological environment. The final chapters conclude with an examination of the determination of excavation responses of urban adjacent utilities and failure analysis based on several case histories. This book provides the latest knowledge in both theory and practical application for geotechnical design engineers working on deep excavation problems. - Presents the latest theory and knowledge surrounding deep braced excavations - Systematically outlines theory, field reports, calculations, and back analysis, making it much easier to master the work relevant with deep braced excavations - Provides detailed visual elements and hyperlinks to additional images and video for case excavations to enhance understanding

Download or read book Numerical Methods in Geotechnical Engineering IX written by António S. Cardoso and published by CRC Press. This book was released on 2018-06-19 with total page 1656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering.

Download or read book Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions written by Francesco Silvestri and published by CRC Press. This book was released on 2019-07-19 with total page 7743 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.

Download or read book Rock Mass Stability Around Underground Excavations in a Mine written by Yan Xing and published by CRC Press. This book was released on 2019-11-20 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stability of underground excavations is of great importance to an operating mine because it ensures the safety of the working people and operating equipment, and successful ore production. Due to the complex geological conditions and mine constructions, and variability and uncertainty in estimating rock mass mechanical properties, the assessment of rock mass stability for an underground mine is extremely challenging and difficult. Tackling of this difficult problem is not covered in detail in any of the textbooks currently available in the rock mechanics literature. This monograph aims to cover this gap in the rock mechanics and rock engineering field. This monograph provides detailed procedures for the stability assessment and support design for an underground mine case study. It covers the background of the mine site including the monitored deformation data, the state-of-art methodologies for the stability analysis of rock masses around underground excavations, performed laboratory tests, estimation of the rock mass properties, a brief theory and background of the 3-D Distinct Element Code (3DEC), and numerical modeling of underground rock mass stability including investigation of the effectiveness of rock supports. The monograph is an excellent reference for the senior undergraduates, graduate students, researchers and practitioners who work in the Underground Rock Mechanics and Rock Engineering area in the Mining Engineering, Civil Geotechnical Engineering and DEM (Distinct Element Method) Numerical modeling.

Download or read book Bifurcation and Localisation Theory in Geomechanics written by A.V. Dyskin and published by CRC Press. This book was released on 2021-07-01 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work contains proceedings of a workshop on Bifurcation and Localisation Theory in Geomechanics, held in Perth, Australia in 1999. It covers a range of themes from classic civil engineering subjects to non-linear and non-unique geological phenomena.