Download or read book Numerical and Experimental Analysis of the Performance of Staggered Short Pin Fin Heat Exchangers written by Leonard J. Hamilton and published by . This book was released on 2003-06-01 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: A three dimensional finite element based numerical model was used to analyze the heat transfer characteristics of various staggered short pin-fin array heat exchangers. The simulation was validated against data from an experimental rig as well as historical data and then used to estimate the heat transfer coefficient and pressure drop for a wide range of Reynolds numbers for circular and airfoil-shaped pin fins. Circular pin configuration variations included changes in pin spacing, axial pitch and pin height ratio. Airfoil pin variations also included changes in length and aspect ratio. Correlations for Nusselt number and friction factor were developed. Using established performance metrics optimum configurations for both pin shapes were determined. The optimum airfoil pin array was shown to match the heat transfer rates obtained by the optimum circular pin configuration while incurring less than one third the specific fluid friction power loss. The results from this study would be of direct value in the design of a shroud enclosed heat exchanger concept being proposed for turbine blade cooling, or for cooling of high power electronic components, or in other high heat flux dissipation applications requiring a low- profile, high area-density based micro-heat exchanger design.
Download or read book An Experimental Investigation of the Performance of Staggered PIN FIN Array Laminar Flow Heat Exchangers written by and published by . This book was released on 2005 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study concentrates on the empirical characterization of a staggered pin-fin array heat exchanger placed in a modular, rectangular wind tunnel. A full analysis of the heat transfer and pressure drop behavior was conducted on various pin-fin shapes, sizes, and configurations. The study was based on airflow over a wide range of Reynolds numbers in the laminar regime. The empirical data gathered can be used to corroborate and develop better numerical models to characterize the performance of such heat exchangers as well as scale down to the micro level for comparison with micro-heat exchangers.
Download or read book Numerical Analysis of the Performance of Staggered Pin Fin Micro Heat Exchangers written by Jui S. Choo and published by . This book was released on 2003-12-01 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: The heat transfer and pressure drop characteristics of a staggered micro pin-fin heat exchanger were analyzed using a three dimensional finite element based numerical model. Simulations were conducted based on low Reynolds number, fully developed laminar airflow through an array of circular pin-fins. A range of results was obtained from different configurations with varying pin spacing, axial pitch and pin height. The results from this study would be useful in ongoing work on the design of a laminar flow micro heat exchanger for high heat flux dissipation systems.
Download or read book Numerical Simulation of Heat Exchangers written by W. J. Minkowycz and published by CRC Press. This book was released on 2017-04-07 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with certain aspects of material science, particularly with the release of thermal energy associated with bond breaking. It clearly establishes the connection between heat transfer rates and product quality. The editors then sharply draw the thermal distinctions between the various categories of welding processes, and demonstrate how these distinctions are translated into simulation model uniqueness. The book discusses the incorporation of radiative heat transfer processes into the simulation model.
Download or read book Numerical and Experimental Study of the Performance of a Drop Shaped Pin Fin Heat Exchanger written by Jihed Boulares and published by . This book was released on 2003-06-01 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research presents the results or a combined numerical and experimental study or heat transfer and pressure drop behavior in a compact heat exchanger (CHE) designed with drop-shaped pin tins. A numerical study using ANSYS was first conducted to select the optimum pin shape and configuration for the CHE. This was followed by an experimental study to validate the numerical model. The results indicate that the drop shaped pin tins yield a considerable improvement in heat transfer compared to circular pin tins tor the same pressure drop characteristics. This improvement is mainly due to the increased wetted surface area of the drop pins, and the delay in the flow separation as it passes the more streamlined drop shaped pin tins. The data and conclusions of this study can he used in heat exchanger design tor large heat flux cooling applications as in gas turbine blades, and high-power electronics.
Download or read book French books in print written by and published by . This book was released on 1993 with total page 2493 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Analysis of the Performance of a Staggered Cross pin Array Heat Exchanger written by Leonard J. Hamilton and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mathematical Modeling written by Eetu N. Virtanen and published by Nova Publishers. This book was released on 2008 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book focuses on important research related to the mathematical modelling of engineering and environmental processes, manufacturing, and industrial systems. It includes heat transfer, fluid mechanics, CFD, and transport phenomena; solid mechanics and mechanics of metals; electromagnets and MHD; reliability modelling and system optimisation; finite volume, finite element, and boundary element procedures; decision sciences in an industrial and manufacturing context; civil engineering systems and structures; mineral and energy resources; relevant software engineering issues associated with CAD and CAE; and materials and metallurgical engineering.
Download or read book Extended Surface Heat Transfer written by Allan D. Kraus and published by John Wiley & Sons. This book was released on 2002-03-14 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drei anerkannte Experten dieses schnellebigen, modernen Fachgebiets erläutern hier Theorie, Design und Anwendungen eines breiten Spektrums von Oberflächen, die speziell für den effizienten Wärmetransport ausgelegt sind. Behandelt werden u. a. kompakte Wärmetauscher, periodische Wärmeströme und Siedevorgänge an Kühlrippen. Umfassend und informativ!
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermohydrodynamic Programming and Constructal Design in Microsystems written by Tao Dong and published by Academic Press. This book was released on 2018-10-20 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermohydrodynamic Programming and Constructal Design in Microsystems explains the direction of a morphing system configuration that is illustrated by life evolution in nature. This is sometimes referred to as the fourth law of thermodynamics, and was first applied in thermofluidic engineering, with more recent applications in physics and biology. The book specifically focuses on synthetic modeling and constructal optimization in the design of microsystemic devices, which are of particular interest to researchers and practitioners in the sphere of micro- and nanoscale physics, a mechanistically deviation from conventional theory. The book is an important reference resource for researchers working in the area of micro- and nanosystems technology and those who want to learn more about how thermodynamics can be effectively applied at the micro level. - Explains how the application of constructal theory can lead to more effective microsystems design - Offers an introduction to the fundamentals and application to different flow and heat/mass transport systems - Bridges the gap between theoretical design and optimization, from a practical point-of-view
Download or read book Heat Transfer Enhancement in Plate and Fin Extended Surfaces written by Sujoy Kumar Saha and published by Springer. This book was released on 2019-06-24 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief deals with heat transfer and friction in plate and fin extended heat transfer enhancement surfaces. It examines Offset-Strip Fin (OSF), Enhancement Principle, Analytically Based Models for j and f vs. Re, Transition from Laminar to Turbulent Region, Correlations for j and f vs. Re, Use of OSF with Liquids, Effect of Percent Fin Offset, Effect of Burred Edges, Louver fin, heat transfer and friction correlations, flow structure in the louver fin array, analytical model for heat transfer and friction, convex louver fin, wavy fin, 3D corrugated fin, perforated fin, pin fins and wire mesh, types of vortex generators, metal foam fin, plain fin, packings, numerical simulation of various types of fins.
Download or read book Journal of Thermophysics and Heat Transfer written by and published by . This book was released on 2007 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: This journal is devoted to the advancement of the science and technology of thermophysics and heat transfer through the dissemination of original research papers disclosing new technical knowledge and exploratory developments and applications based on new knowledge. It publishes papers that deal with the properties and mechanisms involved in thermal energy transfer and storage in gases, liquids, and solids or combinations thereof. These studies include conductive, convective, and radiative modes alone or in combination and the effects of the environment.
Download or read book An Empirical Study of a Pin Fin Heat Exchanger in Laminar and Turbulent Flow written by Jeffrey W. Summers and published by . This book was released on 2003-12 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study concentrates on the empirical characterization of a staggered array pin fin compact heat exchanger placed in a modular, rectangular wind tunnel. A full analysis of the heat transfer and pressure drop behavior was conducted on various pin-fin shapes, sizes, and configurations. The study was based on airflow over a range of low Reynolds numbers in the laminar and low turbulent flow, as well as higher turbulent flow regimes. The empirical data gathered can be used to corroborate and develop better numerical models to characterize the performance of such compact heat exchangers.
Download or read book Heat Transfer Enhancement in Externally Finned Tubes and Internally Finned Tubes and Annuli written by Sujoy Kumar Saha and published by Springer. This book was released on 2019-07-26 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief deals with externally finned tubes, their geometric parameters, Reynolds number, dimensionless variables, friction factor, plain plate fins on round tubes, the effect of fin spacing, correlations, pain individually finned tubes, circular fins with staggered tubes, low integral fin tubes, wavy fin, enhanced plate fin geometries with round tubes, Offset Strip Fins, convex louver fins, louvered fin, perforated fin, mesh fin, vortex generator, enhanced circular fin geometries, spine or segmented fin, wire loop fin, flat extruded tubes with internal membranes, plate and fin automotive radiators, performance comparison, numerical simulation, advanced fin geometries, hydrophilic coatings, internally finned tubes and annuli, spirally fluted and indented tube, advanced internal fin geometries, and finned annuli. The book is ideal for professionals and researchers dealing with thermal management in devices.
Download or read book Compact Heat Exchangers written by Alexander Louis London and published by CRC Press. This book was released on 1990 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat exchangers are a crucial part of aerospace, marine, cryogenic and refrigeration technology. These essays cover such topics as complicated flow arrangements, complex extended surfaces, two-phase flow and irreversibility in heat exchangers, and single-phase heat transfer.
Download or read book An Experimental Study of a Pin Fin Heat Exchanger written by David Ramthun and published by . This book was released on 2003-06-01 with total page 79 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed experimental study has been carried out on the heat transfer and pressure drop characteristics of a compact heat exchanger with pin fins, A modular wind- tunnel with a rectangular cross-section duct-flow area was constructed that would accommodate the heat exchanger test section with varying pin designs. The flow in the tunnel was achieved through a suction-type blower, and a leading entrance length section was added to achieve predictable flow conditions into the heat exchanger test section. The rig was comprehensively instrumented to provide all desired thermal and flow data. The results from this study provide useful empirical data to validate ongoing numerical studies of such heat exchanger designs.
