Download or read book From Nucleons to Nucleus written by Jouni Suhonen and published by Springer Science & Business Media. This book was released on 2007-04-22 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: From Nucleons to Nucleus deals with single-particle and collective features of spherical nuclei. Each nuclear model is introduced and derived in detail. The formalism is then applied to light and medium-heavy nuclei in worked-out examples, and finally the acquired skills are strengthened by a wide selection of exercises, many relating the models to experimental data. Nuclear properties are discussed using particles, holes and quasi-particles. From Nucleons to Nucleus is based on lectures on nuclear physics given by the author, and serves well as a textbook for advanced students. Researchers too will appreciate it as a well-balanced reference to theoretical nuclear physics.
Download or read book Nuclear Models written by Walter Greiner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theoretical physics has become a many-faceted science. For the young student it is difficult enough to cope with the overwhelming amount of new scientific material that has to be learned, let alone to obtain an overview of the entire field, which ranges from mechanics through electrodynamics, quantum mechanics, field theory, nuclear and heavy-ion science, statistical mechanics, thermodynamics, and solid state theory to elementary-particle physics. And this knowledge should be acquired in just 8-10 semesters during which, in addition, a Diploma or Master's thesis has to be worked on or examinations prepared for. All this can be achieved only if the university teachers help to introduce the student to the new disciplines as early on as possible, in order to create interest and excitement that in turn set free essential new energy. Naturally, all inessential material must simply be eliminated. At the Johann Wolfgang Goethe University in Frankfurt we therefore confront the student with theoretical physics immediately in the first semester. Theoretical Mechanics I and II, Electrodynamics, and Quantum Mechanics I - an Introduction are the basic courses during the first two years. These lectures are supplemented with many mathematical explanations and much support material. After the fourth semester of studies, graduate work begins and Quantum Mechanics II - Symme tries, Statistical Mechanics and Thermodynamics, Relativistic Quantum Mechanics, Quantum Electrodynamics, the Gauge Theory of Weak Interactions, and Quantum Chromodynamics are obligatory.
Download or read book Fundamentals of Nuclear Models written by David J. Rowe and published by World Scientific Publishing Company. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the basic models and theories of nuclear structure and gives an in-depth analysis of their experimental and mathematical foundations. It shows the relationships between the models and exhibits the value of following the strategy of: looking for patterns in all the data available, developing phenomenological models to explain them, and finally giving the models a foundation in a fundamental microscopic theory of interacting neutrons and protons. This unique book takes a newcomer from an introduction to nuclear structure physics to the frontiers of the subject along a painless path. It provides both the experimental and mathematical foundations of the essential models in a way that is accessible to a broad range of experimental and theoretical physicists. Thus, the book provides a unique resource and an exposition of the essential principles, mathematical structures, assumptions, and observational data on which the models and theories are based. It avoids discussion of many non-essential variations and technical details of the models.
Download or read book The Nuclear Shell Model written by Kris L.G. Heyde and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is aimed at enabling the reader to obtain a working knowledge of the nuclear shell model and to understand nuclear structure within the framework of the shell model. Attention is concentrated on a coherent, self-contained exposition of the main ideas behind the model with ample illustrations to give an idea beyond formal exposition of the concepts. Since this text grew out of a course taught for advanced undergraduate and first-year graduate students in theoretical nuclear physics, the accents are on a detailed exposition of the material with step-by-step derivations rather than on a superficial description of a large number of topics. In this sense, the book differs from a number of books on theoretical nuclear physics by narrowing the subject to only the nuclear shell model. Most of the expressions used in many of the existing books treating the nuclear shell model are derived here in more detail, in a practitioner's way. Due to frequent student requests I have expanded of detail in order to take away the typical phrase " . . . after some the level simple and straightforward algebra one finds . . . ". The material could probably be treated in a one-year course (implying going through the problem sets and setting up a number of numerical studies by using the provided computer codes). The book is essentially self-contained but requires an introductory course on quantum mechanics and nuclear physics on a more general level.
Download or read book Nuclear Theory Nuclear models written by Judah M. Eisenberg and published by North-Holland. This book was released on 1975 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Collective Motion written by David J. Rowe and published by World Scientific. This book was released on 2010 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two most important developments in nuclear physics were the shell model and the collective model. The former gives the formal framework for a description of nuclei in terms of interacting neutrons and protons. The latter provides a very physical but phenomenological framework for interpreting the observed properties of nuclei. A third approach, based on variational and mean-field methods, brings these two perspectives together in terms of the so-called unified models. Together, these three approaches provide the foundations on which nuclear physics is based. They need to be understood by everyone practicing or teaching nuclear physics, and all those who wish to gain an understanding of the foundations of the models and their relationships to microscopic theory as given by recent developments in terms of dynamical symmetries. This book provides a simple presentation of the models and theory of nuclear collective structure, with an emphasis on the physical content and the ways they are used to interpret data. Part 1 presents the basic phenomenological collective vibrational and rotational models as introduced by Bohr and Mottelson and their many colleagues. It also describes the extensions of these models to parallel unified models in which neutrons and protons move in a mean-field with collective degrees of freedom. Part 2 presents the predominant theories used to describe the collective properties of nuclei in terms of interacting nucleons. These theories, which are shared with other many-body systems, are shown to emerge naturally from the unified models of Part 1.
Download or read book Nuclear Theory Nuclear models written by Judah M. Eisenberg and published by . This book was released on 1987 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. This third enlarged and revised edition incorporates seven extensive new chapters on the general collective model for low-energy modes. In addition there is a new section 4.4 on coordinate symmetries in the collective model, and a new section 13.8 on the two-center shell model, as well as many changes in text figures, tables and references where experimental ortheoretical developments over the past two decades have brought about new information and understanding.
Download or read book Theory of Nucleus written by A. Sitenko and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern nuclear physics is a well developed branch of physical science, with wide-ranging applications of its results in engineering and industry. At the same time, the development of a consistent theory of nuclei and nuclear processes presents certain problems. It is well known that the most important aim of nuclear physics is the study of nuclear structure and the explanation of properties on the basis of the interaction between nucleons which constitute nuclei. Difficulties of a modern theory of the nucleus are caused by both an insufficient knowledge of nuclear interactions and the multi particle character of nuclear systems. Experimental data on nuclear interactions do not contradict the hypothesis of the pair character of nuclear forces. However, the absence of rigorous meth ods of calculations of many particle nuclear systems with strong interaction makes it necessary to use macroscopic nuclear models to describe particular nuclear properties. Nuclear models have been developed in different ways, and the models themselves have been modified and complicated. In spite of the visible discrepancy, different models of the nucleus significantly supple ment one another. The development of nuclear models has led to considerable progress in the understanding of atomic nuclei. The current results of theo retical nuclear physics are reported in numerous scientific papers. The most important and relevant experimental and theoretical results can be found in many monographs, the best of which are written by well-known experts in the field.
Download or read book Fundamentals of Nuclear Models written by David J. Rowe and published by World Scientific. This book was released on 2010 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the basic models and theories of nuclear structure and gives an in-depth analysis of their experimental and mathematical foundations. It shows the relationships between the models and exhibits the value of following the strategy of: looking for patterns in all the data available, developing phenomenological models to explain them, and finally giving the models a foundation in a fundamental microscopic theory of interacting neutrons and protons. This unique book takes a newcomer from an introduction to nuclear structure physics to the frontiers of the subject along a painless path. It provides both the experimental and mathematical foundations of the essential models in a way that is accessible to a broad range of experimental and theoretical physicists. Thus, the book provides a unique resource and an exposition of the essential principles, mathematical structures, assumptions, and observational data on which the models and theories are based. It avoids discussion of many non-essential variations and technical details of the models.
Download or read book Lectures on Nuclear Theory written by Lev D. Landau and published by Springer. This book was released on 2013-12-01 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Models of the Atomic Nucleus written by Norman D. Cook and published by Springer. This book was released on 2009-09-02 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very intuitive and physically precise visualization software for nuclear models Database of all nuclei and isotopes included All nuclear parameters are adjustable in a wide range Comprehensive and introductory book on nuclear models Platform invariant software (Windows, Unix, Mac)
Download or read book Models of the Atomic Nucleus written by Norman D. Cook and published by Springer. This book was released on 2010-11-15 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very intuitive and physically precise visualization software for nuclear models Database of all nuclei and isotopes included All nuclear parameters are adjustable in a wide range Comprehensive and introductory book on nuclear models Platform invariant software (Windows, Unix, Mac)
Download or read book The Nuclear Many Body Problem written by Peter Ring and published by Springer Science & Business Media. This book was released on 2004-03-25 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Study Edition
Download or read book Contemporary Models of the Atomic Nucleus written by P. E. Nemirovskii and published by Elsevier. This book was released on 2013-10-22 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contemporary Models of the Atomic Nucleus discusses nuclear structure and properties, expounding contemporary theoretical concepts of the low-energy nuclear processes underlying in nuclear models. This book focuses on subjects such as the optical nuclear model, unified or collective model, and deuteron stripping reaction. Other topics discussed include the basic nuclear properties; shell model; theoretical analysis of the shell model; and radiative transitions and alpha-decay. The deuteron theory and the liquid drop nuclear model with its application to fission theory are also mentioned, but only briefly discussed. This publication benefits students and researchers conducting work on nuclear physics, specifically on the constituents and interactions of the atomic nucleus.
Download or read book Modelling of Nuclear Reactor Multi physics written by Christophe Demazière and published by Academic Press. This book was released on 2019-11-19 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling of Nuclear Reactor Multiphysics: From Local Balance Equations to Macroscopic Models in Neutronics and Thermal-Hydraulics is an accessible guide to the advanced methods used to model nuclear reactor systems. The book addresses the frontier discipline of neutronic/thermal-hydraulic modelling of nuclear reactor cores, presenting the main techniques in a generic manner and for practical reactor calculations.The modelling of nuclear reactor systems is one of the most challenging tasks in complex system modelling, due to the many different scales and intertwined physical phenomena involved. The nuclear industry as well as the research institutes and universities heavily rely on the use of complex numerical codes. All the commercial codes are based on using different numerical tools for resolving the various physical fields, and to some extent the different scales, whereas the latest research platforms attempt to adopt a more integrated approach in resolving multiple scales and fields of physics. The book presents the main algorithms used in such codes for neutronic and thermal-hydraulic modelling, providing the details of the underlying methods, together with their assumptions and limitations. Because of the rapidly expanding use of coupled calculations for performing safety analyses, the analysists should be equally knowledgeable in all fields (i.e. neutron transport, fluid dynamics, heat transfer).The first chapter introduces the book’s subject matter and explains how to use its digital resources and interactive features. The following chapter derives the governing equations for neutron transport, fluid transport, and heat transfer, so that readers not familiar with any of these fields can comprehend the book without difficulty. The book thereafter examines the peculiarities of nuclear reactor systems and provides an overview of the relevant modelling strategies. Computational methods for neutron transport, first at the cell and assembly levels, then at the core level, and for one-/two-phase flow transport and heat transfer are treated in depth in respective chapters. The coupling between neutron transport solvers and thermal-hydraulic solvers for coarse mesh macroscopic models is given particular attention in a dedicated chapter. The final chapter summarizes the main techniques presented in the book and their interrelation, then explores beyond state-of-the-art modelling techniques relying on more integrated approaches. Covers neutron transport, fluid dynamics, and heat transfer, and their interdependence, in one reference Analyses the emerging area of multi-physics and multi-scale reactor modelling Contains 71 short videos explaining the key concepts and 77 interactive quizzes allowing the readers to test their understanding
Download or read book Nuclear Physics written by National Research Council and published by National Academies Press. This book was released on 1999-03-31 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dramatic progress has been made in all branches of physics since the National Research Council's 1986 decadal survey of the field. The Physics in a New Era series explores these advances and looks ahead to future goals. The series includes assessments of the major subfields and reports on several smaller subfields, and preparation has begun on an overview volume on the unity of physics, its relationships to other fields, and its contributions to national needs. Nuclear Physics is the latest volume of the series. The book describes current activity in understanding nuclear structure and symmetries, the behavior of matter at extreme densities, the role of nuclear physics in astrophysics and cosmology, and the instrumentation and facilities used by the field. It makes recommendations on the resources needed for experimental and theoretical advances in the coming decade.
Download or read book Nuclear and Particle Physics written by Brian R. Martin and published by John Wiley & Sons. This book was released on 2011-08-31 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: An accessible introduction to nuclear and particle physics with equal coverage of both topics, this text covers all the standard topics in particle and nuclear physics thoroughly and provides a few extras, including chapters on experimental methods; applications of nuclear physics including fission, fusion and biomedical applications; and unsolved problems for the future. It includes basic concepts and theory combined with current and future applications. An excellent resource for physics and astronomy undergraduates in higher-level courses, this text also serves well as a general reference for graduate studies.
