Download or read book Digital Instrumentation and Control Systems in Nuclear Power Plants written by National Research Council and published by National Academies Press. This book was released on 1997-04-18 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on the development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation without introducing off-setting safety problems. This book identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. It focuses on eight areas: software quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and the adequacy of technical infrastructure.
Download or read book Nuclear Power Plant Instrumentation and Control Systems for Safety and Security written by Yastrebenetsky, Michael and published by IGI Global. This book was released on 2014-02-28 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accidents and natural disasters involving nuclear power plants such as Chernobyl, Three Mile Island, and the recent meltdown at Fukushima are rare, but their effects are devastating enough to warrant increased vigilance in addressing safety concerns. Nuclear Power Plant Instrumentation and Control Systems for Safety and Security evaluates the risks inherent to nuclear power and methods of preventing accidents through computer control systems and other such emerging technologies. Students and scholars as well as operators and designers will find useful insight into the latest security technologies with the potential to make the future of nuclear energy clean, safe, and reliable.
Download or read book Maintenance of Process Instrumentation in Nuclear Power Plants written by H.M. Hashemian and published by Springer Science & Business Media. This book was released on 2006-11-09 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a training course for I and C maintenance engineers in power, process, chemical, and other industries. It summarizes all the scattered literature in this field. The book compiles 30 years of knowledge gained by the author and his staff in testing the I and C systems of nuclear power plants around the world. It focuses on process temperature and pressure sensors and the verification of these sensors’ calibration and response time.
Download or read book Managing Modernization of Nuclear Power Plant Instrumentation and Control Systems written by International Atomic Energy Agency and published by . This book was released on 2004 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers all of the management activities related to modernization of I&C systems in nuclear power plants, including the evaluation of all I&C systems to determine which can be successfully maintained and which need to be modernized.
Download or read book Verification and Validation of Software Related to Nuclear Power Plant Instrumentation and Control written by International Atomic Energy Agency and published by . This book was released on 1999 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report provides practical guidance on the methods available for verification of the software and validation of computer based systems in nuclear power plants, and on how and when these methods can be effectively applied. It will be of particular interest to all those involved in the development, implementation, maintenance and use of software and computer based instrumentation and control systems in nuclear power plants.
Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics and Control of Nuclear Reactors written by Thomas W. Kerlin and published by Academic Press. This book was released on 2019-10-05 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics and Control of Nuclear Reactors presents the latest knowledge and research in reactor dynamics, control and instrumentation; important factors in ensuring the safe and economic operation of nuclear power plants. This book provides current and future engineers with a single resource containing all relevant information, including detailed treatments on the modeling, simulation, operational features and dynamic characteristics of pressurized light-water reactors, boiling light-water reactors, pressurized heavy-water reactors and molten-salt reactors. It also provides pertinent, but less detailed information on small modular reactors, sodium fast reactors, and gas-cooled reactors. Provides case studies and examples to demonstrate learning through problem solving, including an analysis of accidents at Three Mile Island, Chernobyl and Fukushima Daiichi Includes MATLAB codes to enable the reader to apply the knowledge gained to their own projects and research Features examples and problems that illustrate the principles of dynamic analysis as well as the mathematical tools necessary to understand and apply the analysis Publishers Note: Table 3.1 has been revised and will be included in future printings of the book with the following data: Group Decay Constant, li (sec-1) Delayed Neutron Fraction (bi) 1 0.0124 0.000221 2 0.0305 0.001467 3 0.111 0.001313 4 0.301 0.002647 5 1.14 0.000771 6 3.01 0.000281 Total delayed neutron fraction: 0.0067
Download or read book Digital Instrumentation and Control Systems in Nuclear Power Plants written by Committee on Application of Digital Instrumentation and Control Systems to Nuclear Power Plant Operations and Safety and published by National Academies Press. This book was released on 1997-05-02 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on the development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation without introducing off-setting safety problems. This book identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. It focuses on eight areas: software quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and the adequacy of technical infrastructure.
Download or read book POWER PLANT INSTRUMENTATION written by K. KRISHNASWAMY and published by PHI Learning Pvt. Ltd.. This book was released on 2013-08-10 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this text presents an overview of power generation and discusses the different types of equipment used in a steam thermal power generation unit. The book describes various conventional and non-conventional energy sources. It elaborates on the instrumentation and control of water-steam and fuel-air flue gas circuits along with optimization of combustion. The text also deals with the power plant management system including the combustion process, boiler efficiency calculation, and maintenance and safety aspects. In addition, the book explains Supervisory Control and Data Acquisition (SCADA) system as well as turbine monitoring and control. This book is designed for the undergraduate students of electronics and instrumentation engineering and electrical and electronics engineering. New To This Edition • A new chapter on Nuclear Power Plant Instrumentation is added, which elaborates how electricity is generated in a Nuclear Power Plant. Key Features • Includes numerous figures to clarify the concepts. • Gives a number of worked-out problems to help students enhance their learning skills. • Provides chapter-end exercises to enable students to test their understanding of the subject.
Download or read book Thermal Power Plant Control and Instrumentation written by David Lindsley and published by . This book was released on 2018 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power-plant Control and Instrumentation, 2nd edition - contents include a wide variety of plant and combustion arrangements, from smaller boiler systems to full-scale generators, common principles, commercial aspects, measurement, and key techniques such as cogeneration and combined cycle.
Download or read book Cyber Security and Safety of Nuclear Power Plant Instrumentation and Control Systems written by Yastrebenetsky, Michael A. and published by IGI Global. This book was released on 2020-05-22 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and security are crucial to the operations of nuclear power plants, but cyber threats to these facilities are increasing significantly. Instrumentation and control systems, which play a vital role in the prevention of these incidents, have seen major design modifications with the implementation of digital technologies. Advanced computing systems are assisting in the protection and safety of nuclear power plants; however, significant research on these computational methods is deficient. Cyber Security and Safety of Nuclear Power Plant Instrumentation and Control Systems is a pivotal reference source that provides vital research on the digital developments of instrumentation and control systems for assuring the safety and security of nuclear power plants. While highlighting topics such as accident monitoring systems, classification measures, and UAV fleets, this publication explores individual cases of security breaches as well as future methods of practice. This book is ideally designed for engineers, industry specialists, researchers, policymakers, scientists, academicians, practitioners, and students involved in the development and operation of instrumentation and control systems for nuclear power plants, chemical and petrochemical industries, transport, and medical equipment.
Download or read book Power plant Control and Instrumentation written by David Lindsley and published by IET. This book was released on 2000 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes control systems for boilers and heat-recovery steam generators (HRSGs) in a variety of applications, from waste-to-energy plants to combined-cycle gas-turbine power stations. Basics such as methods of connecting instruments are explained, and more advanced discussions of design features of distributed control systems are also included. At every stage, emphasis is given to the interactive nature of plants and to troubleshooting and problem solving. Includes chapter summaries. The author is Fellow of the Institution of Electrical Engineers, and the Institute of Marine Engineers, and is a Senior Member of the Instrument Society of America. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Nuclear Power Plant Instrumentation and Control Systems for Safety and Security written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book evaluates the risks inherent to nuclear power and methods of preventing accidents through computer control systems and other such emerging technologies"--
Download or read book Marine Nuclear Power Technology written by Junchong Yu and published by Springer Nature. This book was released on 2020-04-16 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to basic approaches in and principles of marine nuclear power design, including overall reactor design, in-core design, coolant systems and devices, I&C system design, safety system design, and dynamic analysis assessment. It comprehensively reviews both the fundamentals of and latest trends in nuclear-powered devices, covering their entire lifespan, from design and testing to operation and decommissioning. Further, it explores in detail various real-world conditions in the marine context – such as insufficient space for equipment deployment and frequently changing operating conditions as well as swinging and tilting. Offering extensive information on the design and operation of marine nuclear power systems, the book is a valuable resource for researchers and professionals in the area of marine science and nuclear engineering, and graduate students intending to embark on a career in the field.
Download or read book Nuclear Power Plants Innovative Technologies for Instrumentation and Control Systems written by Yang Xu and published by Springer Nature. This book was released on 2020-01-07 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a compilation of selected papers from the Fourth International Symposium on Software Reliability, Industrial Safety, Cyber Security and Physical Protection of Nuclear Power Plant, held in August 2019 in Guiyang, China. The purpose of the symposium was to discuss inspection, testing, certification and research concerning the software and hardware of instrument and control (I&C) systems used at nuclear power plants (NPP), such as sensors, actuators and control systems. The event provides a venue for exchange among experts, scholars and nuclear power practitioners, as well as a platform for the combination of teaching and research at universities and enterprises to promote the safe development of nuclear power plants. Readers will find a wealth of valuable insights into achieving safer and more efficient instrumentation and control systems.
Download or read book Instrumentation and Control Systems for Nuclear Power Plants written by Mauro Cappelli and published by Elsevier. This book was released on 2022-10-14 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation and Control Systems for Nuclear Power Plants provides the latest innovative research on the design of effective modern I&C systems for both existing and newly commissioned plants, along with information on system implementation. Editor Mauro Cappelli and his team of expert contributors cover fundamentals, explore the most advanced research in control systems technology, and tackle topics such as human-machine interface, control room redesign, human factors issues, and control modeling. The inclusion of codes and standards, inspection procedures and regulatory issues ensure that the reader can confidently design their own I&C systems and integrate them into existing nuclear sites and projects. Covers various viewpoints, including theory, modeling, design and applications of I&C systems Includes codes and standards, inspection procedures and regulatory issues Combines engineering and physics aspects in one thorough resource, presenting human factors, modeling and HMI together for the first time
Download or read book Technical Challenges in the Application and Licensing of Digital Instrumentation and Control Systems in Nuclear Power Plants written by and published by . This book was released on 2015 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt: "With the modernization of existing analogue instrumentation and control (I & C) systems in nuclear power plants through digital I & C technology, and the implementation of digital I & C systems in new plants, the industry is faced with significant challenges. These challenges appear in the form of difficulties in managing the necessarily incremental transition, highly integrated (and interdependent) architectures, the flexible configurability enabled by digital technology, and uncertainty and inconsistency in licensing digital I & C systems and equipment in the different Member States. This publication discusses 17 major issues that utilities, developers, suppliers and regulatory stakeholders need to consider, so that the industry can capture and benefit from shared experience, recent technological developments, and emerging best practices."--Publisher's description.
