Download or read book Nuclear Engineering written by Malcolm Joyce and published by Butterworth-Heinemann. This book was released on 2017-09-18 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Engineering: A Conceptual Introduction to Nuclear Power provides coverage of the introductory, salient principles of nuclear engineering in a comprehensive manner for those entering the profession at the end of their degree. The nuclear power industry is undergoing a renaissance because of the desire for low-carbon baseload electricity, the growing population, and environmental concerns about shale gas, so this book is a welcomed addition to the science. In addition, users will find a great deal of information on the change in the industry, along with other topical areas of interest that are uniquely covered. Intended for undergraduate students or early postgraduate students studying nuclear engineering, this new text will also be appealing to scientifically-literate non-experts wishing to be better informed about the ‘nuclear option'. Presents a succinct and clear explanation of the key facts and concepts on how nuclear engineering power systems function and how their related fuel supply cycles operate Provides full coverage of the nuclear fuel cycle, including its scientific and historical basis Describes a comprehensive range of relevant reactor designs, from those that are defunct, current, and in plan/construction for the future, including SMRs and GenIV Summarizes all major accidents and their impact on the industry and society
Download or read book Nuclear Power Engineering written by Mohamed Mohamed El-Wakil and published by . This book was released on 1962 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Engineering Handbook written by Kenneth D. Kok and published by CRC Press. This book was released on 2016-10-03 with total page 1136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building upon the success of the first edition, the Nuclear Engineering Handbook, Second Edition, provides a comprehensive, up-to-date overview of nuclear power engineering. Consisting of chapters written by leading experts, this volume spans a wide range of topics in the areas of nuclear power reactor design and operation, nuclear fuel cycles, and radiation detection. Plant safety issues are addressed, and the economics of nuclear power generation in the 21st century are presented. The Second Edition also includes full coverage of Generation IV reactor designs, and new information on MRS technologies, small modular reactors, and fast reactors.
Download or read book Nuclear Power written by Janet Wood and published by IET. This book was released on 2007-01-31 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains in detail how nuclear power works, its costs, benefits as part of the electricity supply system and examines its record. This book covers the nuclear power debate.
Download or read book Nuclear Engineering Fundamentals written by Robert E. Masterson and published by CRC Press. This book was released on 2017-05-18 with total page 961 pages. Available in PDF, EPUB and Kindle. Book excerpt: NUCLEAR ENGINEERING FUNDAMENTALS is the most modern, up-to-date, and reader friendly nuclear engineering textbook on the market today. It provides a thoroughly modern alternative to classical nuclear engineering textbooks that have not been updated over the last 20 years. Printed in full color, it conveys a sense of awe and wonder to anyone interested in the field of nuclear energy. It discusses nuclear reactor design, nuclear fuel cycles, reactor thermal-hydraulics, reactor operation, reactor safety, radiation detection and protection, and the interaction of radiation with matter. It presents an in-depth introduction to the science of nuclear power, nuclear energy production, the nuclear chain reaction, nuclear cross sections, radioactivity, and radiation transport. All major types of reactors are introduced and discussed, and the role of internet tools in their analysis and design is explored. Reactor safety and reactor containment systems are explored as well. To convey the evolution of nuclear science and engineering, historical figures and their contributions to evolution of the nuclear power industry are explored. Numerous examples are provided throughout the text, and are brought to life through life-like portraits, photographs, and colorful illustrations. The text follows a well-structured pedagogical approach, and provides a wide range of student learning features not available in other textbooks including useful equations, numerous worked examples, and lists of key web resources. As a bonus, a complete Solutions Manual and .PDF slides of all figures are available to qualified instructors who adopt the text. More than any other fundamentals book in a generation, it is student-friendly, and truly impressive in its design and its scope. It can be used for a one semester, a two semester, or a three semester course in the fundamentals of nuclear power. It can also serve as a great reference book for practicing nuclear scientists and engineers. To date, it has achieved the highest overall satisfaction of any mainstream nuclear engineering textbook available on the market today.
Download or read book Nuclear Principles in Engineering written by Tatjana Jevremovic and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear engineering plays an important role in various industrial, health care, and energy processes. Modern physics has generated its fundamental principles. A growing number of students and practicing engineers need updated material to access the technical language and content of nuclear principles. "Nuclear Principles in Engineering, Second Edition" is written for students, engineers, physicians and scientists who need up-to-date information in basic nuclear concepts and calculation methods using numerous examples and illustrative computer application areas. This new edition features a modern graphical interpretation of the phenomena described in the book fused with the results from research and new applications of nuclear engineering, including but not limited to nuclear engineering, power engineering, homeland security, health physics, radiation treatment and imaging, radiation shielding systems, aerospace and propulsion engineering, and power production propulsion.
Download or read book Nuclear Reactor written by John C. Lee and published by John Wiley & Sons. This book was released on 2020-02-26 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory text for broad areas of nuclear reactor physics Nuclear Reactor Physics and Engineering offers information on analysis, design, control, and operation of nuclear reactors. The author—a noted expert on the topic—explores the fundamentals and presents the mathematical formulations that are grounded in differential equations and linear algebra. The book puts the focus on the use of neutron diffusion theory for the development of techniques for lattice physics and global reactor system analysis. The author also includes recent developments in numerical algorithms, including the Krylov subspace method, and the MATLAB software, including the Simulink toolbox, for efficient studies of steady-state and transient reactor configurations. In addition, nuclear fuel cycle and associated economics analysis are presented, together with the application of modern control theory to reactor operation. This important book: Provides a comprehensive introduction to the fundamental concepts of nuclear reactor physics and engineering Contains information on nuclear reactor kinetics and reactor design analysis Presents illustrative examples to enhance understanding Offers self-contained derivation of fluid conservation equations Written for undergraduate and graduate students in nuclear engineering and practicing engineers, Nuclear Reactor Physics and Engineering covers the fundamental concepts and tools of nuclear reactor physics and analysis.
Download or read book Power Engineering written by Viorel Badescu and published by CRC Press. This book was released on 2018-12-07 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, power engineering has been a subfield of energy engineering and electrical engineering which deals with the generation, transmission, distribution and utilization of electric power and the electrical devices connected to such systems including generators, motors and transformers. Implicitly this perception is associated with the generation of power in large hydraulic, thermal and nuclear plants and distributed consumption. Faced with the climate change phenomena, humanity has had to now contend with changes in attitudes in respect of environment protection and depletion of classical energy resources. These have had consequences in the power production sector, already faced with negative public opinions on nuclear energy and favorable perception of renewable energy resources and about distributed power generation. The objective of this edited book is to review all these changes and to present solutions for future power generation. Future energy systems must factor in the changes and developments in technology like improvements of natural gas combined cycles and clean coal technologies, carbon dioxide capture and storage, advancements in nuclear reactors and hydropower, renewable energy engineering, power-to-gas conversion and fuel cells, energy crops, new energy vectors biomass-hydrogen, thermal energy storage, new storage systems diffusion, modern substations, high voltage engineering equipment and compatibility, HVDC transmission with FACTS, advanced optimization in a liberalized market environment, active grids and smart grids, power system resilience, power quality and cost of supply, plug-in electric vehicles, smart metering, control and communication technologies, new key actors as prosumers, smart cities. The emerging research will enhance the security of energy systems, safety in operation, protection of environment, improve energy efficiency, reliability and sustainability. The book reviews current literature in the advances, innovative options and solutions in power engineering. It has been written for researchers, engineers, technicians and graduate and doctorate students interested in power engineering.
Download or read book Risk informed Methods and Applications in Nuclear and Energy Engineering written by Curtis Smith and published by Academic Press. This book was released on 2023-11-16 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk-informed Methods and Applications in Nuclear and Energy Engineering: Modelling, Experimentation, and Validation presents a comprehensive view of the latest technical approaches and experimental capabilities in nuclear energy engineering. Based on Idaho National Laboratory’s popular summer school series, this book compiles a collection of entries on the cutting-edge research and knowledge presented by proponents and developers of current and future nuclear systems, focusing on the connection between modelling and experimental approaches. Included in this book are key topics such as probabilistic concepts for risk analysis, the survey of legacy reliability and risk analysis tools, and newly developed tools supporting dynamic probabilistic risk-assessment. This book is an insightful and inspiring compilation of work from top nuclear experts from INL. Industry professionals, researchers and academics working in nuclear engineering, safety, operations and training will gain a board picture of the current state-of-practice and be able to apply that to their own risk-assessment studies. Based on Idaho National Laboratory’s summer school series, this book is a collection of entries from proponents and developers of current and future nuclear systems Provides an up-to-date view of current technical approaches and experimental capabilities in nuclear energy engineering, covering modeling and validation, and focusing on risk-informed methods and applications Equips the reader with an understanding of various case studies and experimental validations to enable them to carry out a risk-assessment study
Download or read book Fundamentals of Thermal and Nuclear Power Generation written by Yasuo Koizumi and published by Elsevier. This book was released on 2021-01-28 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Thermal and Nuclear Power Generation is the first volume in the JSME Series in Thermal and Nuclear Power Generation. The first part of this volume provides a thorough and complete reference on the history of thermal and nuclear power generation, which has informed and sculpted today’s industry. It prepares readers for subsequent publications in the series that address more advanced topics and will particularly benefit early career researchers and those approaching the industry from an alternative discipline.Modern thermal and nuclear power generation systems and technologies are then explored, including clear analysis on the fundamentals of thermodynamics, hydrodynamics, thermal engineering, combustion engineering, and nuclear physics. The impact of these technologies on society is considered throughout, as well as supply issues, accident risk analysis, and important emission and sustainability considerations.This book is an invaluable resource for researchers and professional engineers in nuclear and thermal energy engineering, and postgraduate and undergraduate students in power generation, especially nuclear and thermal. Written by experts from the leaders and pioneers in thermal and nuclear power engineering research at the Japanese Society of Mechanical Engineers and draws upon their combined wealth of knowledge and experience Includes real examples and case studies from Japan and other key regions such as the United States and Europe to provide a deeper learning opportunity Considers societal impact and sustainability concerns and goals throughout
Download or read book Thermal Engineering of Nuclear Power Stations written by Charles F. Bowman and published by CRC Press. This book was released on 2020-06-07 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Engineering of Nuclear Power Stations: Balance-of-Plant Systems serves as a ready reference to better analyze common engineering challenges in the areas of turbine cycle analysis, thermodynamics, and heat transfer. The scope of the book is broad and comprehensive, encompassing the mechanical aspects of the entire nuclear station balance of plant from the source of the motive steam to the discharge and/or utilization of waste heat and beyond. Written for engineers in the fields of nuclear plant and thermal engineering, the book examines the daily, practical problems encountered by mechanical design, system, and maintenance engineers. It provides clear examples and solutions drawn from numerous case studies in actual, operating nuclear stations.
Download or read book Nuclear Reactor Engineering written by Samuel Glasstone and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr. Samuel Glasstone, the senior author of the previous editions of this book, was anxious to live until his ninetieth birthday, but passed away in 1986, a few months short of this milestone. I am grateful for the many years of stimulation received during our association, and in preparing this edition have attempted to maintain his approach. Previous editions of this book were intended to serve as a text for students and a reference for practicing engineers. Emphasis was given to the broad perspective, particularly for topics important to reactor design and oper ation, with basic coverage provided in such supporting areas as neutronics, thermal-hydraulics, and materials. This, the Fourth Edition, was prepared with these same general objectives in mind. However, during the past three decades, the nuclear industry and university educational programs have matured considerably, presenting some challenges in meeting the objec tives of this book. Nuclear power reactors have become much more complex, with an ac companying growth in supporting technology. University programs now offer separate courses covering such basic topics as reactor physics, thermal hydraulics, and materials. Finally, the general availability of inexpensive xv xvi Preface powerful micro-and minicomputers has transformed design and analysis procedures so that sophisticated methods are now commonly used instead of earlier, more approximate approaches.
Download or read book Nuclear Reactor Design written by Yoshiaki Oka and published by Springer. This book was released on 2014-06-11 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on core design and methods for design and analysis. It is based on advances made in nuclear power utilization and computational methods over the past 40 years, covering core design of boiling water reactors and pressurized water reactors, as well as fast reactors and high-temperature gas-cooled reactors. The objectives of this book are to help graduate and advanced undergraduate students to understand core design and analysis, and to serve as a background reference for engineers actively working in light water reactors. Methodologies for core design and analysis, together with physical descriptions, are emphasized. The book also covers coupled thermal hydraulic core calculations, plant dynamics, and safety analysis, allowing readers to understand core design in relation to plant control and safety.
Download or read book Fundamentals of Nuclear Science and Engineering Second Edition written by J. Kenneth Shultis and published by CRC Press. This book was released on 2007-09-07 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the bestselling first edition, there have been numerous advances in the field of nuclear science. In medicine, accelerator based teletherapy and electron-beam therapy have become standard. New demands in national security have stimulated major advances in nuclear instrumentation.An ideal introduction to the fundamentals of nuclear science and engineering, this book presents the basic nuclear science needed to understand and quantify an extensive range of nuclear phenomena. New to the Second Edition— A chapter on radiation detection by Douglas McGregor Up-to-date coverage of radiation hazards, reactor designs, and medical applications Flexible organization of material that allows for quick reference This edition also takes an in-depth look at particle accelerators, nuclear fusion reactions and devices, and nuclear technology in medical diagnostics and treatment. In addition, the author discusses applications such as the direct conversion of nuclear energy into electricity. The breadth of coverage is unparalleled, ranging from the theory and design characteristics of nuclear reactors to the identification of biological risks associated with ionizing radiation. All topics are supplemented with extensive nuclear data compilations to perform a wealth of calculations. Providing extensive coverage of physics, nuclear science, and nuclear technology of all types, this up-to-date second edition of Fundamentals of Nuclear Science and Engineering is a key reference for any physicists or engineer.
Download or read book Introduction to Nuclear Engineering written by John R. Lamarsh and published by Pearson Higher Ed. This book was released on 2013-08-29 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text is designed for junior and senior level Nuclear Engineering students. The third edition of this highly respected text offers the most current and complete introduction to nuclear engineering available. Introduction to Nuclear Engineering has been thoroughly updated with new information on French, Russian, and Japanese nuclear reactors. All units have been revised to reflect current standards. In addition to the numerous end-of-chapter problems, computer exercises have been added.
Download or read book Nuclear Systems written by Neil E. Todreas and published by CRC Press. This book was released on 1992-09-01 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition builds on earlier traditions in providing broad subject-area coverage, application of theory to practical aspects of commercial nuclear power, and use of instructional objectives. Like the first edition, it focuses on what distinguishes nuclear engineering from the other engineering disciplines. However, this edition includes reorganization and overall update of descriptions of reactor designs and fuel-cycle steps, and more emphasis on reactor safety, especially related to technical and management lessons learned from the TMI-2 and Chernobyl - 4 accidents.
Download or read book Nuclear Engineering written by Ronald Allen Knief and published by . This book was released on 2008 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt:
