Download or read book Nuclear Engineering written by Malcolm Joyce and published by Butterworth-Heinemann. This book was released on 2017-09-18 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Engineering: A Conceptual Introduction to Nuclear Power provides coverage of the introductory, salient principles of nuclear engineering in a comprehensive manner for those entering the profession at the end of their degree. The nuclear power industry is undergoing a renaissance because of the desire for low-carbon baseload electricity, the growing population, and environmental concerns about shale gas, so this book is a welcomed addition to the science. In addition, users will find a great deal of information on the change in the industry, along with other topical areas of interest that are uniquely covered. Intended for undergraduate students or early postgraduate students studying nuclear engineering, this new text will also be appealing to scientifically-literate non-experts wishing to be better informed about the 'nuclear option'. - Presents a succinct and clear explanation of the key facts and concepts on how nuclear engineering power systems function and how their related fuel supply cycles operate - Provides full coverage of the nuclear fuel cycle, including its scientific and historical basis - Describes a comprehensive range of relevant reactor designs, from those that are defunct, current, and in plan/construction for the future, including SMRs and GenIV - Summarizes all major accidents and their impact on the industry and society

Download or read book Nuclear Engineering Handbook written by Kenneth D. Kok and published by CRC Press. This book was released on 2016-10-03 with total page 1328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building upon the success of the first edition, the Nuclear Engineering Handbook, Second Edition, provides a comprehensive, up-to-date overview of nuclear power engineering. Consisting of chapters written by leading experts, this volume spans a wide range of topics in the areas of nuclear power reactor design and operation, nuclear fuel cycles, and radiation detection. Plant safety issues are addressed, and the economics of nuclear power generation in the 21st century are presented. The Second Edition also includes full coverage of Generation IV reactor designs, and new information on MRS technologies, small modular reactors, and fast reactors.

Download or read book Fundamentals of Nuclear Science and Engineering written by J. Kenneth Shultis and published by CRC Press. This book was released on 2007-09-07 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the bestselling first edition, there have been numerous advances in the field of nuclear science. In medicine, accelerator based teletherapy and electron-beam therapy have become standard. New demands in national security have stimulated major advances in nuclear instrumentation.An ideal introduction to the fundamentals of nuclear science and engineering, this book presents the basic nuclear science needed to understand and quantify an extensive range of nuclear phenomena. New to the Second Edition— A chapter on radiation detection by Douglas McGregor Up-to-date coverage of radiation hazards, reactor designs, and medical applications Flexible organization of material that allows for quick reference This edition also takes an in-depth look at particle accelerators, nuclear fusion reactions and devices, and nuclear technology in medical diagnostics and treatment. In addition, the author discusses applications such as the direct conversion of nuclear energy into electricity. The breadth of coverage is unparalleled, ranging from the theory and design characteristics of nuclear reactors to the identification of biological risks associated with ionizing radiation. All topics are supplemented with extensive nuclear data compilations to perform a wealth of calculations. Providing extensive coverage of physics, nuclear science, and nuclear technology of all types, this up-to-date second edition of Fundamentals of Nuclear Science and Engineering is a key reference for any physicists or engineer.

Download or read book Nuclear Principles in Engineering written by Tatjana Jevremovic and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear engineering plays an important role in various industrial, health care, and energy processes. Modern physics has generated its fundamental principles. A growing number of students and practicing engineers need updated material to access the technical language and content of nuclear principles. "Nuclear Principles in Engineering, Second Edition" is written for students, engineers, physicians and scientists who need up-to-date information in basic nuclear concepts and calculation methods using numerous examples and illustrative computer application areas. This new edition features a modern graphical interpretation of the phenomena described in the book fused with the results from research and new applications of nuclear engineering, including but not limited to nuclear engineering, power engineering, homeland security, health physics, radiation treatment and imaging, radiation shielding systems, aerospace and propulsion engineering, and power production propulsion.

Download or read book Nuclear Engineering written by K. Almenas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: ***VERKAUFSKATEGORIE*** 1 e This textbook covers the core subjects of nuclear engineering. Developed to meet the needs of today's students and nuclear power plant operators, the text establishes a framework for the various areas of knowledge that comprise the field and explains rather than just defines the relevant physical phenomena. For today's engineer the principal analytical design tool is the personal computer. The text takes advantage of this recent development. PC programs are provided which either expand the computational range accessible to the student, or serve to illustrate the relevant physical phenomena. Some of the included programs are simplified versions of computational procedures used in the field and can be used as training tool for design calculations. The text devotes special attention to subjects which have an impact on the safe operation of nuclear power reactors. This includes the design of safety optimized core configurations, the physical mechanisms underlying the various reactivity coefficients, and the calibration procedures for control rods. A final chapter is devoted to the licensing and safety evaluation of power reactors.

Download or read book Nuclear Engineering Fundamentals written by Robert E. Masterson and published by CRC Press. This book was released on 2017-05-18 with total page 961 pages. Available in PDF, EPUB and Kindle. Book excerpt: NUCLEAR ENGINEERING FUNDAMENTALS is the most modern, up-to-date, and reader friendly nuclear engineering textbook on the market today. It provides a thoroughly modern alternative to classical nuclear engineering textbooks that have not been updated over the last 20 years. Printed in full color, it conveys a sense of awe and wonder to anyone interested in the field of nuclear energy. It discusses nuclear reactor design, nuclear fuel cycles, reactor thermal-hydraulics, reactor operation, reactor safety, radiation detection and protection, and the interaction of radiation with matter. It presents an in-depth introduction to the science of nuclear power, nuclear energy production, the nuclear chain reaction, nuclear cross sections, radioactivity, and radiation transport. All major types of reactors are introduced and discussed, and the role of internet tools in their analysis and design is explored. Reactor safety and reactor containment systems are explored as well. To convey the evolution of nuclear science and engineering, historical figures and their contributions to evolution of the nuclear power industry are explored. Numerous examples are provided throughout the text, and are brought to life through life-like portraits, photographs, and colorful illustrations. The text follows a well-structured pedagogical approach, and provides a wide range of student learning features not available in other textbooks including useful equations, numerous worked examples, and lists of key web resources. As a bonus, a complete Solutions Manual and .PDF slides of all figures are available to qualified instructors who adopt the text. More than any other fundamentals book in a generation, it is student-friendly, and truly impressive in its design and its scope. It can be used for a one semester, a two semester, or a three semester course in the fundamentals of nuclear power. It can also serve as a great reference book for practicing nuclear scientists and engineers. To date, it has achieved the highest overall satisfaction of any mainstream nuclear engineering textbook available on the market today.

Download or read book Fundamentals of Nuclear Engineering written by Brent J. Lewis and published by John Wiley & Sons. This book was released on 2017-03-24 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental of Nuclear Engineering is derived from over 25 years of teaching undergraduate and graduate courses on nuclear engineering. The material has been extensively class tested and provides the most comprehensive textbook and reference on the fundamentals of nuclear engineering. It includes a broad range of important areas in the nuclear engineering field; nuclear and atomic theory; nuclear reactor physics, design, control/dynamics, safety and thermal-hydraulics; nuclear fuel engineering; and health physics/radiation protection. It also includes the latest information that is missing in traditional texts, such as space radiation. The aim of the book is to provide a source for upper level undergraduate and graduate students studying nuclear engineering.

Download or read book Computational Nuclear Engineering and Radiological Science Using Python written by Ryan McClarren and published by Academic Press. This book was released on 2017-10-19 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Nuclear Engineering and Radiological Science Using Python provides the necessary knowledge users need to embed more modern computing techniques into current practices, while also helping practitioners replace Fortran-based implementations with higher level languages. The book is especially unique in the market with its implementation of Python into nuclear engineering methods, seeking to do so by first teaching the basics of Python, then going through different techniques to solve systems of equations, and finally applying that knowledge to solve problems specific to nuclear engineering. Along with examples of code and end-of-chapter problems, the book is an asset to novice programmers in nuclear engineering and radiological sciences, teaching them how to analyze complex systems using modern computational techniques. For decades, the paradigm in engineering education, in particular, nuclear engineering, has been to teach Fortran along with numerical methods for solving engineering problems. This has been slowly changing as new codes have been written utilizing modern languages, such as Python, thus resulting in a greater need for the development of more modern computational skills and techniques in nuclear engineering. - Offers numerical methods as a tool to solve specific problems in nuclear engineering - Provides examples on how to simulate different problems and produce graphs using Python - Supplies accompanying codes and data on a companion website, along with solutions to end-of-chapter problems

Download or read book Handbook of Nuclear Engineering written by Dan Gabriel Cacuci and published by Springer Science & Business Media. This book was released on 2010-09-14 with total page 3701 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an authoritative compilation of information regarding methods and data used in all phases of nuclear engineering. Addressing nuclear engineers and scientists at all levels, this book provides a condensed reference on nuclear engineering since 1958.

Download or read book Nuclear Reactor written by John C. Lee and published by John Wiley & Sons. This book was released on 2020-02-26 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory text for broad areas of nuclear reactor physics Nuclear Reactor Physics and Engineering offers information on analysis, design, control, and operation of nuclear reactors. The author—a noted expert on the topic—explores the fundamentals and presents the mathematical formulations that are grounded in differential equations and linear algebra. The book puts the focus on the use of neutron diffusion theory for the development of techniques for lattice physics and global reactor system analysis. The author also includes recent developments in numerical algorithms, including the Krylov subspace method, and the MATLAB software, including the Simulink toolbox, for efficient studies of steady-state and transient reactor configurations. In addition, nuclear fuel cycle and associated economics analysis are presented, together with the application of modern control theory to reactor operation. This important book: Provides a comprehensive introduction to the fundamental concepts of nuclear reactor physics and engineering Contains information on nuclear reactor kinetics and reactor design analysis Presents illustrative examples to enhance understanding Offers self-contained derivation of fluid conservation equations Written for undergraduate and graduate students in nuclear engineering and practicing engineers, Nuclear Reactor Physics and Engineering covers the fundamental concepts and tools of nuclear reactor physics and analysis.

Download or read book Foundations of Nuclear Engineering written by Thomas J. Connolly and published by John Wiley & Sons. This book was released on 1978 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nuclear Corrosion Science and Engineering written by Damien Feron and published by Elsevier. This book was released on 2012-02-21 with total page 1073 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of nuclear materials, i.e. the interaction between these materials and their environments, is a major issue for plant safety as well as for operation and economic competitiveness. Understanding these corrosion mechanisms, the systems and materials they affect, and the methods to accurately measure their incidence is of critical importance to the nuclear industry. Combining assessment techniques and analytical models into this understanding allows operators to predict the service life of corrosion-affected nuclear plant materials, and to apply the most appropriate maintenance and mitigation options to ensure safe long term operation.This book critically reviews the fundamental corrosion mechanisms that affect nuclear power plants and facilities. Initial sections introduce the complex field of nuclear corrosion science, with detailed chapters on the different types of both aqueous and non aqueous corrosion mechanisms and the nuclear materials susceptible to attack from them. This is complemented by reviews of monitoring and control methodologies, as well as modelling and lifetime prediction approaches. Given that corrosion is an applied science, the final sections review corrosion issues across the range of current and next-generation nuclear reactors, and across such nuclear applications as fuel reprocessing facilities, radioactive waste storage and geological disposal systems.With its distinguished editor and international team of expert contributors, Nuclear corrosion science and engineering is an invaluable reference for nuclear metallurgists, materials scientists and engineers, as well as nuclear facility operators, regulators and consultants, and researchers and academics in this field. - Comprehensively reviews the fundamental corrosion mechanisms that affect nuclear power plants and facilities - Chapters assess different types of both aqueous and non aqueous corrosion mechanisms and the nuclear materials susceptible to attack from them - Considers monitoring and control methodologies, as well as modelling and lifetime prediction approaches

Download or read book Nuclear Power Engineering written by Mohamed Mohamed El-Wakil and published by . This book was released on 1962 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Radioactive Waste Engineering and Management written by Shinya Nagasaki and published by Springer. This book was released on 2015-04-07 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes essential and effective management for reliably ensuring public safety from radioactive wastes in Japan. This is the first book to cover many aspects of wastes from the nuclear fuel cycle to research and medical use, allowing readers to understand the characterization, treatment and final disposal of generated wastes, performance assessment, institutional systems, and social issues such as intergenerational ethics. Exercises at the end of each chapter help to understand radioactive waste management in context.

Download or read book Multilingual Dictionary of Nuclear Reactor Physics and Engineering written by Henryk Anglart and published by CRC Press. This book was released on 2020-11-09 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multilingual dictionary explains, in simple and clear language, the most frequently used terms and expressions in the field of nuclear reactor physics and engineering, and provides translations of these terms from English into French, German, Swedish and Polish. This unique resource offers many advantages over the use of online translation tools, which are often incorrect when dealing with scientific and technical words. Instead, this dictionary has used a wide variety of peer-reviewed books and journal papers to ensure the highest accuracy and establish itself as a reliable and credible reference for the reader. It covers a broad range of exciting topics and the latest developments in the field, including reactor technology, reactor components and systems, reactor operation and control, reactor types, reactor physics, thermal engineering, reactor safety, radiation protection, nuclear fuel, nuclear chemistry, the safeguarding of nuclear materials and much more. This dictionary is kept on a technical level corresponding to masters-level and PhD studies of nuclear physics and engineering. It will provide the reader with a broad understanding of the necessary information that a researcher or nuclear physicist or engineer would need to possess; therefore, it will be an invaluable resource for students within these and related disciplines. Features: Contains over 1500 key terms from the field The first book to provide translations in five languages: English, French, German, Swedish and Polish Accessible to masters-level and PhD students in addition to early career researchers in nuclear reactor physics and engineering

Download or read book Nuclear Systems written by Neil E. Todreas and published by CRC Press. This book was released on 1992-09-01 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition builds on earlier traditions in providing broad subject-area coverage, application of theory to practical aspects of commercial nuclear power, and use of instructional objectives. Like the first edition, it focuses on what distinguishes nuclear engineering from the other engineering disciplines. However, this edition includes reorganization and overall update of descriptions of reactor designs and fuel-cycle steps, and more emphasis on reactor safety, especially related to technical and management lessons learned from the TMI-2 and Chernobyl - 4 accidents.

Download or read book Introduction to Nuclear Concepts for Engineers written by Robert M. Mayo and published by . This book was released on 1998 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents students with nuclear concepts, models, vocabulary, and problem-solving skills that are essential for success in subsequent course work in reactor theory and engineering. Designed for a sophomore science or engineering student with a firm foundation in the basics of college physics and mathematics through ordinary differential equations, Mayo's book addresses concepts in modern physics (special relativity, quantum concepts, etc.) and develops those concepts as necessary in the presentation of the text material. The text objective is to present fundamental nuclear principles in a clear and understandable yet physically sound manner.