Download or read book Practical RF System Design written by William F. Egan and published by John Wiley & Sons. This book was released on 2004-03-15 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultimate practical resource for today's RF system design professionals Radio frequency components and circuits form the backbone of today's mobile and satellite communications networks. Consequently, both practicing and aspiring industry professionals need to be able to solve ever more complex problems of RF design. Blending theoretical rigor with a wealth of practical expertise, Practical RF System Design addresses a variety of complex, real-world problems that system engineers are likely to encounter in today's burgeoning communications industry with solutions that are not easily available in the existing literature. The author, an expert in the field of RF module and system design, provides powerful techniques for analyzing real RF systems, with emphasis on some that are currently not well understood. Combining theoretical results and models with examples, he challenges readers to address such practical issues as: * How standing wave ratio affects system gain * How noise on a local oscillator will affect receiver noise figure and desensitization * How to determine the dynamic range of a cascade from module specifications * How phase noise affects system performance and where it comes from * How intermodulation products (IMs) predictably change with signal amplitude, and why they sometimes change differently An essential resource for today's RF system engineers, the text covers important topics in the areas of system noise and nonlinearity, frequency conversion, and phase noise. Along with a wealth of practical examples using MATLAB(r) and Excel, spreadsheets are available for download from an FTP Web site to help readers apply the methods outlined in this important resource.

Download or read book RF Circuit Design Techniques for MF UHF Applications written by Abdullah Eroglu and published by CRC Press. This book was released on 2017-12-19 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic resonance imaging, semiconductor processing, and RFID are some of the critical applications within the medium frequency (MF) to ultrahigh frequency (UHF) range that require RF designers to have a solid understanding of analytical and experimental RF techniques. Designers need to be able to design components and devices cost effectively, and integrate them with high efficiency, minimal loss, and required power. Computer-aided design (CAD) tools also play an important part in helping to reduce costs and improve accuracy through optimization. RF Circuit Design Techniques for MF-UHF Applications explains how to design, simulate, and implement RF/microwave components and devices for applications within the medium frequency (MF) to ultrahigh frequency (UHF) range. The book makes RF design simple by expertly blending theory, simulation, and practical application examples. A Practical Guide to RF Circuit Design in the MF-UHF Range: Theory, Simulation, and Real-World Application Examples After a review of network parameters used in the analysis of RF components and devices, the book examines MF-UHF design techniques in detail. These include techniques for designing high-power microstrip circuits, directional couplers, transformers, composite and multilayer inductors, filters, combiners/dividers, and RFID systems. For every device, the book gives the required theory and then explains the verification process with CAD tools. In addition, each design is illustrated with real-life implementation examples that use a variety of CAD tools such as MATLAB®, Mathcad, HFSSTM, Ansoft Designer®, Sonnet®, and PSpice®. Design tables, curves, and charts are included to demonstrate an efficient design process. Throughout, the book also offers practical hints to help engineers shorten the design time. Design MF-UHF Devices More Cost-Effectively The book reflects the optimum design methodology used in RF engineering, from the application of theory, to simulation for verification, to experimentation. Packed with useful techniques, tips, and examples, it is an invaluable resource for engineers, researchers, and students working in the MF-UHF range.

Download or read book Novel RF Analysis and Design Techniques written by Aliakbar Homayoun and published by . This book was released on 2013 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of RF integrated circuits continues to challenge engineers and researchers, demanding new circuit topologies and transceiver architectures. New ideas often require new analysis techniques as well, so that the designer can insightfully quantify the underlying principles. This research addresses three problems in RF circuits: (1) analysis of phase noise in phase/frequency detectors (PFDs), an essential component in RF synthesizers; (2) analysis of the relation between the phase noise of delay lines and ring oscillators; and (3) design of a new low-power RF CMOS receiver for IEEE 802.11a. The first analysis derives equations for the phase noise and shows that an octave increase in the input frequency raises the phase noise by 6 dB if flicker noise is dominant and by 3 dB if white noise is dominant. The second analysis reveals a simple shaping function and also dispels the commonly-accepted premise that symmetric rise and fall times in a ring oscillator suppress the upconversion of flicker noise. The third part deals with the design of a low-power 5-GHz receiver. While advances in the art have considerably reduced the power consumption of RF oscillators, frequency dividers, and analog-to-digital converters, the main receiver chain in 5-GHz systems draws a disproportionately high power, about 46 mW. It is therefore desirable to develop low-power RX front ends and baseband filters for WiFi applications. This work introduces a complete 5-GHz CMOS receiver that meets the 11a sensitivity, blocking, and filtering requirements while consuming 11.6 mW. This fourfold reduction in power is achieved through the use of a transformer as a low-noise amplifier, passive mixers, and non-invasive baseband filtering. A new analysis of passive current-driven mixers sheds light on their properties.

Download or read book Advanced Design Techniques for RF Power Amplifiers written by Anna N. Rudiakova and published by Springer Science & Business Media. This book was released on 2006-09-09 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Design Techniques for RF Power Amplifiers provides a deep analysis of theoretical aspects, modelling, and design strategies of RF high-efficiency power amplifiers. The book can be used as a guide by scientists and engineers dealing with the subject and as a text book for graduate and postgraduate students. Although primarily intended for skilled readers, it provides an excellent quick start for beginners.

Download or read book Microwave Active Circuit Analysis and Design written by Clive Poole and published by Academic Press. This book was released on 2015-11-03 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book teaches the skills and knowledge required by today’s RF and microwave engineer in a concise, structured and systematic way. Reflecting modern developments in the field, this book focuses on active circuit design covering the latest devices and design techniques. From electromagnetic and transmission line theory and S-parameters through to amplifier and oscillator design, techniques for low noise and broadband design; This book focuses on analysis and design including up to date material on MMIC design techniques. With this book you will: Learn the basics of RF and microwave circuit analysis and design, with an emphasis on active circuits, and become familiar with the operating principles of the most common active system building blocks such as amplifiers, oscillators and mixers Be able to design transistor-based amplifiers, oscillators and mixers by means of basic design methodologies Be able to apply established graphical design tools, such as the Smith chart and feedback mappings, to the design RF and microwave active circuits Acquire a set of basic design skills and useful tools that can be employed without recourse to complex computer aided design Structured in the form of modular chapters, each covering a specific topic in a concise form suitable for delivery in a single lecture Emphasis on clear explanation and a step-by-step approach that aims to help students to easily grasp complex concepts Contains tutorial questions and problems allowing readers to test their knowledge An accompanying website containing supporting material in the form of slides and software (MATLAB) listings Unique material on negative resistance oscillator design, noise analysis and three-port design techniques Covers the latest developments in microwave active circuit design with new approaches that are not covered elsewhere

Download or read book High Frequency Techniques written by Joseph F. White and published by John Wiley & Sons. This book was released on 2016-08-01 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is an introduction to microwave engineering. The scope of this book extends from topics for a first course in electrical engineering, in which impedances are analyzed using complex numbers, through the introduction of transmission lines that are analyzed using the Smith Chart, and on to graduate level subjects, such as equivalent circuits for obstacles in hollow waveguides, analyzed using Green’s Functions. This book is a virtual encyclopedia of circuit design methods. Despite the complexity, topics are presented in a conversational manner for ease of comprehension. The book is not only an excellent text at the undergraduate and graduate levels, but is as well a detailed reference for the practicing engineer. Consider how well informed an engineer will be who has become familiar with these topics as treated in High Frequency Techniques: (in order of presentation) Brief history of wireless (radio) and the Morse code U.S. Radio Frequency Allocations Introduction to vectors AC analysis and why complex numbers and impedance are used Circuit and antenna reciprocity Decibel measure Maximum power transfer Skin effect Computer simulation and optimization of networks LC matching of one impedance to another Coupled Resonators Uniform transmission lines for propagation VSWR, return Loss and mismatch error The Telegrapher Equations (derived) Phase and Group Velocities The Impedance Transformation Equation for lines (derived) Fano's and Bode's matching limits The Smith Chart (derived) Slotted Line impedance measurement Constant Q circles on the Smith Chart Approximating a transmission line with lumped L's and C's ABCD, Z, Y and Scattering matrix analysis methods for circuits Statistical Design and Yield Analysis of products Electromagnetic Fields Gauss's Law Vector Dot Product, Divergence and Curl Static Potential and Gradient Ampere's Law and Vector Curl Maxwell's Equations and their visualization The Laplacian Rectangular, cylindrical and spherical coordinates Skin Effect The Wave Equation The Helmholtz Equations Plane Propagating Waves Rayleigh Fading Circular (elliptic) Polarization Poynting's Theorem EM fields on Transmission Lines Calculating the impedance of coaxial lines Calculating and visualizing the fields in waveguides Propagation constants and waveguide modes The Taylor Series Expansion Fourier Series and Green's Functions Higher order modes and how to suppress them Vector Potential and Retarded Potentials Wire and aperture antennas Radio propagation and path loss Electromagnetic computer simulation of structures Directional couplers The Rat Race Hybrid Even and Odd Mode Analysis applied to the backward wave coupler Network analyzer impedance and transmission measurements Two-port Scattering Parameters (s matrix) The Hybrid Ring coupler The Wilkinson power divider Filter design: Butterworth, Maximally flat & Tchebyscheff responses Filter Q Diplexer, Bandpass and Elliptic filters Richard's Transformation & Kuroda’s Identities Mumford's transmission line stub filters Transistor Amplifier Design: gain, biasing, stability, and conjugate matching Noise in systems, noise figure of an amplifier cascade Amplifier non-linearity, and spurious free dynamic range Statistical Design and Yield Analysis

Download or read book Advanced Design Techniques and Realizations of Microwave and RF Filters written by Pierre Jarry and published by John Wiley & Sons. This book was released on 2008-08-15 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fundamentals needed to design and realize microwave and RF filters. Microwave and RF filters play an important role in communication systems and, owing to the proliferation of radar, satellite, and mobile wireless systems, there is a need for design methods that can satisfy the ever-increasing demand for accuracy, reliability, and shorter development times. Beginning with a brief review of scattering and chain matrices, filter approximations and synthesis, waveguides and transmission lines, and fundamental electromagnetic equations, the book then covers design techniques for microwave and RF filters operating across a frequency range from 1 GHz to 35 GHz. Each design chapter: Is dedicated to only one filter and is organized by the type of filter response Provides several design examples, including the analysis and modeling of the structures discussed and the methodologies employed Offers practical information on the actual performance of the filters and common difficulties encountered during construction Concludes with the construction technique, pictures of the inside and outside of the filter, and the measured performances Advanced Design Techniques and Realizations of Microwave and RF Filters is an essential resource for wireless and telecommunication engineers, as well as for researchers interested in current microwave and RF filter design practices. It is also appropriate as a supplementary textbook for advanced undergraduate courses in filter design.

Download or read book RF Circuit Design written by Christopher Bowick and published by Elsevier. This book was released on 2014-06-28 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential reading for experts in the field of RF circuit design and engineers needing a good reference. This book provides complete design procedures for multiple-pole Butterworth, Chebyshev, and Bessel filters. It also covers capacitors, inductors, and other components with their behavior at RF frequencies discussed in detail. Provides complete design procedures for multiple-pole Butterworth, Chebyshev, and Bessel filters Covers capacitors, inductors, and other components with their behavior at RF frequencies discussed in detail

Download or read book Modeling and Design Techniques for RF Power Amplifiers written by Arvind Raghavan and published by John Wiley & Sons. This book was released on 2008-02-04 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Achieve higher levels of performance, integration, compactness, and cost-effectiveness in the design and modeling of radio-frequency (RF) power amplifiers RF power amplifiers are important components of any wireless transmitter, but are often the limiting factors in achieving better performance and lower cost in a wireless communication system—presenting the RF IC design community with many challenges. The next-generation technological advances presented in this book are the result of cutting-edge research in the area of large-signal device modeling and RF power amplifier design at the Georgia Institute of Technology, and have the potential to significantly address issues of performance and cost-effectiveness in this area. Richly complemented with hundreds of figures and equations, Modeling and Design Techniques for RF Power Amplifiers introduces and explores the most important topics related to RF power amplifier design under one concise cover. With a focus on efficiency enhancement techniques and the latest advances in the field, coverage includes: Device modeling for CAD Empirical modeling of bipolar devices Scalable modeling of RF MOSFETs Power amplifier IC design Power amplifier design in silicon Efficiency enhancement of RF power amplifiers The description of state-of-the-art techniques makes this book a valuable and handy reference for practicing engineers and researchers, while the breadth of coverage makes it an ideal text for graduate- and advanced undergraduate-level courses in the area of RF power amplifier design and modeling.

Download or read book Fundamentals of Microwave and RF Design written by Michael Steer and published by NC State University. This book was released on 2019-09 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Microwave and RF Design enables mastery of the essential concepts required to cross the barriers to a successful career in microwave and RF design. Extensive treatment of scattering parameters, that naturally describe power flow, and of Smith-chart-based design procedures prepare the student for success. The emphasis is on design at the module level and on covering the whole range of microwave functions available. The orientation is towards using microstrip transmission line technologies and on gaining essential mathematical, graphical and design skills for module design proficiency. This book is derived from a multi volume comprehensive book series, Microwave and RF Design, Volumes 1-5, with the emphasis in this book being on presenting the fundamental materials required to gain entry to RF and microwave design. This book closely parallels the companion series that can be consulted for in-depth analysis with referencing of the book series being familiar and welcoming. Key Features * A companion volume to a comprehensive series on microwave and RF design * Open access ebook editions are hosted by NC State University Libraries at https://repository.lib.ncsu.edu/handle/1840.20/36776 * 59 worked examples * An average of 24 exercises per chapter * Answers to selected exercises * Emphasis on module-level design using microstrip technologies * Extensive treatment of design using Smith charts * A parallel companion book series provides a detailed reference resource

Download or read book Radar RF Circuit Design Second Edition written by Nickolas Kingsley and published by Artech House. This book was released on 2022-02-28 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of a previous bestseller gives you practical techniques for optimizing RF and microwave circuits for applications in radar systems design, with an emphasis on current and emerging technologies. Completely updated with new material, the book shows you how to design RF components for radar systems and how to choose appropriate materials and packaging methods. It takes you through classic techniques, to the state of the art, and finally to emerging technologies. You will learn: How to design high-frequency circuits for use in radar applications How to integrate components while avoiding higher-level assembly issues and troubleshooting problems on the measurement bench How to properly simulate, build, assemble, and test high-frequency circuits How to debug issues with hardware on the bench How to connect microwave theory to practical circuit design Theory and practical information are provided while addressing topics ranging from heat removal to digital circuit integration. The book serves as a teaching aid for classic techniques that are still relevant today. It also demonstrates how these techniques are serving as the foundation for technologies to come. You will be equipped to consider future needs and emerging enabling technologies and confidently think (and design) outside the box to ensure future needs are met. The book also shows you how to incorporate modern design techniques often overlooked or underused, and will help you to better understand the capabilities and limitations of today’s technology and the emerging technologies that are on the horizon to mitigate those limitations. This is a must-have resource for system-level radar designers who want to up their game in RF/microwave component design. It is also a great tool for RF/microwave engineers tasked or interested in designing components for radar systems. Students and new designers of radar components will also benefit and be well prepared to start designing immediately.

Download or read book Secrets of RF Circuit Design written by Joseph J. Carr and published by McGraw Hill Professional. This book was released on 2001-01-01 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: BUILD THE CIRCUITS THAT MAKE WIRELESS WORK If you like hands-on electronics, you’ll love Secrets of RF Circuit Design, Third Edition, by Popular Electronics writer Joe Carr. This update of the favorite RF circuit guide of thousands of electronics enthusiasts takes you inside wireless technology with step-by-step, illustrated directions for dozens of usable projects. This super guide demonstrates RF theory as it shows you how to overcome the technical and materials challenges facing those who build real-world electronics. You learn how to design and build receiver circuits, RF bridges, amplifiers, receiver preselectors, simple spectrum analyzers, and time domain reflectometers. You get detailed insights into simple RF instruments, as well as UHF and microwave components...complete troubleshooting guidance...and handy parts lists and components sources. This new edition packs the latest information on directional and hybrid couplers, and seven new chapters on demodulators, circuit vectors, measuring L-C circuits, and filtering circuits against EMI. “...a great book on wireless technology for persons starting out in RF electronics, as well as for RF technicians and ham radio operators.” ---Cotter W. Sayre, author of The Complete RF Technician’s Handbook (Amazon.com review)

Download or read book RF Circuit Design written by Richard C. Li and published by John Wiley & Sons. This book was released on 2012-08-24 with total page 919 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes the schemes and technologies in RF circuit design, describes the basic parameters of an RF system and the fundamentals of RF system design, and presents an introduction of the individual RF circuit block design. Forming the backbone of today's mobile and satellite communications networks, radio frequency (RF) components and circuits are incorporated into everything that transmits or receives a radio wave, such as mobile phones, radio, WiFi, and walkie talkies. RF Circuit Design, Second Edition immerses practicing and aspiring industry professionals in the complex world of RF design. Completely restructured and reorganized with new content, end-of-chapter exercises, illustrations, and an appendix, the book presents integral information in three complete sections: Part One explains the different methodologies between RF and digital circuit design and covers voltage and power transportation, impedance matching in narrow-band case and wide-band case, gain of a raw device, measurement, and grounding. It also goes over equipotentiality and current coupling on ground surface, as well as layout and packaging, manufacturability of product design, and radio frequency integrated circuit (RFIC). Part Two includes content on the main parameters and system analysis in RF circuit design, the fundamentals of differential pair and common-mode rejection ratio (CMRR), Balun, and system-on-a-chip (SOC). Part Three covers low-noise amplifier (LNA), power amplifier (PA), voltage-controlled oscillator (VCO), mixers, and tunable filters. RF Circuit Design, Second Edition is an ideal book for engineers and managers who work in RF circuit design and for courses in electrical or electronic engineering.

Download or read book Multi Standard CMOS Wireless Receivers Analysis and Design written by Xiaopeng Li and published by Springer Science & Business Media. This book was released on 2005-12-19 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book on the subject of multi-standard wireless receivers. It covers both the analysis and design aspects of CMOS radio receivers, with primary focus on receivers for mobile terminals. The subject of multi-standard data converter design for base stations is also covered.

Download or read book Wireless Communication Electronics written by Robert Sobot and published by Springer Science & Business Media. This book was released on 2012-02-18 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for senior undergraduate and graduate students as well as practicing engineers who are involved in design and analysis of radio frequency (RF) circuits. Detailed tutorials are included on all major topics required to understand fundamental principles behind both the main sub-circuits required to design an RF transceiver and the whole communication system. Starting with review of fundamental principles in electromagnetic (EM) transmission and signal propagation, through detailed practical analysis of RF amplifier, mixer, modulator, demodulator, and oscillator circuit topologies, all the way to the system communication theory behind the RF transceiver operation, this book systematically covers all relevant aspects in a way that is suitable for a single semester university level course.

Download or read book Analysis Methods for RF Microwave and Millimeter Wave Planar Transmission Line Structures written by Cam Nguyen and published by John Wiley & Sons. This book was released on 2003-06-11 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: A one-stop reference to the major techniques for analyzing microwave planar transmission line structures The last two decades have seen important progress in the development of methods for the analysis of microwave and millimeter-wave passive structures, which contributed greatly to microwave integrated circuit design while also stimulating the development of new planar transmission lines. This timely and authoritative work introduces microwave engineers to the most commonly used techniques for analyzing microwave planar transmission line structures. Designed to be easily accessible to readers with only a fundamental background in electromagnetic theory, the book provides clear explanations of the theory and applications of Green's function, the conformal-mapping method, spectral domain methods, variational methods, and the mode-matching methods. Coverage for each method is self-contained and supplemented with problems and solutions as well as useful figures. In addition to providing detailed formulations of the methods under discussion, this highly practical book also demonstrates how to apply the principles of electromagnetic theory to the analysis of microwave boundary value problems, customize methods for specific needs, and develop new techniques. Analysis Methods for RF, Microwave, and Millimeter-Wave Planar Transmission Line Structures is an excellent working resource for anyone involved in the design and engineering of RF, microwave, and millimeter-wave integrated circuits.

Download or read book Theory Analysis and Design of RF Interferometric Sensors written by Cam Nguyen and published by Springer Science & Business Media. This book was released on 2011-11-23 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory, Analysis and Design of RF Interferometric Sensors presents the theory, analysis and design of RF interferometric sensors. RF interferometric sensors are attractive for various sensing applications that require every fine resolution and accuracy as well as fast speed. The book also presents two millimeter-wave interferometric sensors realized using RF integrated circuits. The developed millimeter-wave homodyne sensor shows sub-millimeter resolution in the order of 0.05 mm without correction for the non-linear phase response of the sensor's quadrature mixer. The designed millimeter-wave double-channel homodyne sensor provides a resolution of only 0.01 mm, or 1/840th of the operating wavelength, and can inherently suppress the non-linearity of the sensor's quadrature mixer. The experimental results of displacement and velocity measurement are presented as a way to demonstrate the sensing ability of the RF interferometry and to illustrate its many possible applications in sensing. The book is succinct, yet the material is very much self-contained, enabling readers with an undergraduate background in electrical engineering or physics with some experiences or graduate courses in RF circuits to understand easily.