Download or read book Novel Regenerated Solvent Extraction Processes for the Recovery of Carboxylic Acids Or Ammonia from Aqueous Solutions written by Loree Joanne Poole and published by . This book was released on 1990 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reactive Extraction written by Hans-Jörg Bart and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This booklet is designed to bridge the gap between handbooks and technical literature and aims at graduate students or experienced readers. Commercial flow sheeting simulation software is increasingly available and is used in the early steps of process design in industry. As to this, more sophisticated and precise models based on activities instead of concentrations should be used. After an introductory chapter there is in Chapter 2 an intensive discussion of reactive phase equilibria of ionic and non-ionic solutes based on chemical potentials. Chapter 3 introduces to multicomponent diffusion and mass transfer. However, the main focus is on the reactive mass transfer on rigid and mobile surfaces where the interfacial reaction, molecular diffusion and adsorption layers are decisive. The respective extraction of zinc with a cation exchanger and of acetic acid with an anion exchanger is discussed as case studies. Since adsorption layers and surfactants have a major impact on liquid-liquid extraction efficiency, the final chapter reviews several tech niques which make use of polymeric species in an extractive process. A short review is also given on extraction apparatus and the hydrodynamics (hydraulic design, droplet populance balances) of columns. Much of the booklet is based on the PhD works of C. Czapla (2000), G. Modes (2000), H. Klocker (1996), T. Kronberger (1995), M. Marters (2000), M. Roos (2000), M. Traving (2000) and B. Wachter (1996) who I wish to thank for their fruitful contributions.
Download or read book Industrial Separation Processes written by André B. de Haan and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-07-06 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation processes on an industrial scale account for well over half of the capital and operating costs in the chemical industry. Knowledge of these processes is key for every student of chemical or process engineering. This book is ideally suited to university teaching, thanks to its wealth of exercises and solutions. The second edition boasts an even greater number of applied examples and case studies as well as references for further reading.
Download or read book Solvent Extraction written by Vladimir S Kislik and published by Elsevier. This book was released on 2011-11-04 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main challenge in modern solvent extraction separation is that most techniques are mainly empirical, specific and particular for narrow fields of practice and require a large degree of experimentation. This concise and modern book provides a complete overview of both solvent extraction separation techniques and the novel and unified competitive complexation/solvation theory. This novel and unified technique presented in the book provides a key for a preliminary quantitative prediction of suitable extraction systems without experimentation, thus saving researchers time and resources. Analyzes and compares both classical and new competitive models and techniques Offers a novel and unified competitive complexation / solvation theory that permits researchers to standardize some parameters, which decreases the need for experimentation at R&D Presents examples of applications in multiple disciplines such as chemical, biochemical, radiochemical, pharmaceutical and analytical separation Written by an outstanding scientist who is prolific in the field of separation science
Download or read book Unit Operations in Food Processing written by R. L. Earle and published by Elsevier. This book was released on 2013-10-22 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This long awaited second edition of a popular textbook has a simple and direct approach to the diversity and complexity of food processing. It explains the principles of operations and illustrates them by individual processes. The new edition has been enlarged to include sections on freezing, drying, psychrometry, and a completely new section on mechanical refrigeration. All the units have been converted to SI measure. Each chapter contains unworked examples to help the student gain a grasp of the subject, and although primarily intended for the student food technologist or process engineer, this book will also be useful to technical workers in the food industry
Download or read book Acetic Acid and its Derivatives written by Victor H. Agreda and published by CRC Press. This book was released on 1992-12-16 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Striking a balance between basic chemistry and chemical engineering, this up-to-date reference discusses important aspects of acetic acid and its major derivatives, including chemistry, methods of preparation and manufacture, and synthesis, as well as current and emerging downstream technologies.;The book provides comprehensive physical property data for compounds and their separation, including acetic acid-water separation. Describing five categories of techniques for the manufacture of acetic acid, it: examines thermophysical properties and aqueous solutions, with detailed explanations of mathematical models and correlations; supplies a critical analysis of property; outlines manufacturing costs and related economic factors; reviews the applications of acetic acid and derivatives; covers the chemistry and preparation of the derivatives; elucidates recent topics such as deicers, esters and new esterification technologies.
Download or read book Purification of Laboratory Chemicals written by W.L.F. Armarego and published by Elsevier. This book was released on 2003-03-07 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its fifth edition, the book has been updated to include more detailed descriptions of new or more commonly used techniques since the last edition as well as remove those that are no longer used, procedures which have been developed recently, ionization constants (pKa values) and also more detail about the trivial names of compounds.In addition to having two general chapters on purification procedures, this book provides details of the physical properties and purification procedures, taken from literature, of a very extensive number of organic, inorganic and biochemical compounds which are commercially available. This is the only complete source that covers the purification of laboratory chemicals that are commercially available in this manner and format.* Complete update of this valuable, well-known reference* Provides purification procedures of commercially available chemicals and biochemicals* Includes an extremely useful compilation of ionisation constants
Download or read book Separation Processes written by Pradeep Kumar Mishra and published by Allied Publishers. This book was released on 2009 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributed articles presented at an International Conference on Separation Processes organized by Institute of Chemical Engineering & Technology, Institute of Technology, Banaras Hindu University in 2009.
Download or read book Production of Yellow Cake and Uranium Fluorides written by International Atomic Energy Agency and published by . This book was released on 1980 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Environmental Chemistry written by Donald T. Sawyer and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph consists of manuscripts submitted by invited speakers who participated in the symposium "Industrial Environmental Chemistry: Waste Minimization in Industrial Processes and Remediation of Hazardous Waste," held March 24-26, 1992, at Texas A&M University. This meeting was the tenth annual international symposium sponsored by the Texas A&M Industry-University Cooperative Chemistry Program (IUCCP). The program was developed by an academic-industrial steering committee consisting of the co-chairmen, Professors Donald T. Sawyer and Arthur E. Martell of the Texas A&M University Chemistry Department, and members appointed by the sponsoring companies: Bernie A. Allen, Jr., Dow Chemical USA; Kirk W. Brown, Texas A&M University; Abraham Clearfield, Texas A&M University; Greg Leyes, Monsanto Company; Jay Warner, Hoechst-Celanese Corporation; Paul M. Zakriski, BF Goodrich Company; and Emile A. Schweikert, Texas A&M University (IUCCP Coordinator). The subject of this conference reflects the interest that has developed in academic institutions and industry for technological solutions to environmental contamination by industrial wastes. Progress is most likely with strategies that minimize waste production from industrial processes. Clearly the key to the protection and preservation of the environment will be through R&D that optimizes chemical processes to minimize or eliminate waste streams. Eleven of the papers are directed to waste minimization. An additional ten papers discuss chemical and biological remediation strategies for hazardous wastes that contaminate soils, sludges, and water.
Download or read book Applications of Ion Exchange Materials in Biomedical Industries written by Inamuddin and published by Springer. This book was released on 2019-01-30 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the applications of ion-exchange materials in the biomedical industries. It includes topics related to the application of ion exchange chromatography in determination, extraction and separation of various compounds such as amino acids, morphine, antibiotics, nucleotides, penicillin and many more. This title is a highly valuable source of knowledge on ion-exchange materials and their applications suitable for postgraduate students and researchers but also to industrial R&D specialists in chemistry, chemical, and biochemical technology. Additionally, this book will provide an in-depth knowledge of ion-exchange column and operations suitable for engineers and industrialists.
Download or read book Biochar for Environmental Management written by Dr. Johannes Lehmann and published by Earthscan. This book was released on 2009 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Biochar is the carbon-rich product when biomass (such as wood, manure, or crop residues) is heated in a closed container with little or no available air. It can be used to improve agriculture and the environment in several ways, and its stability in soil and superior nutrient-retention properties make it an ideal soil amendment to increase crop yields. In addition to this, biochar sequestration, in combination with sustainable biomass production, can be carbon-negative and therefore used to actively remove carbon dioxide from the atmosphere, with major implications for mitigation of climate change. Biochar production can also be combined with bioenergy production through the use of the gases that are given off in the pyrolysis process.This book is the first to synthesize the expanding research literature on this topic. The book's interdisciplinary approach, which covers engineering, environmental sciences, agricultural sciences, economics and policy, is a vital tool at this stage of biochar technology development. This comprehensive overview of current knowledge will be of interest to advanced students, researchers and professionals in a wide range of disciplines"--Provided by publisher.
Download or read book Production of Platform Chemicals from Sustainable Resources written by Zhen Fang and published by Springer. This book was released on 2017-06-14 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state-of-the-art reviews, the latest research, prospects and challenges of the production of platform chemicals such as C6 sugars, 5-hydroxymethylfurfural, furfural, gamma-valerolactone, xylitol, 2,5-furandicarboxylic acid, levulinic acid, ethanol and others from sustainable biomass resources using processes that include heterogeneous catalysis, ionic liquids, hydrothermal/solvothermal, electrochemical and fermentation methods. It also discusses the application of these chemicals and their derivatives for synthesizing commodity chemicals via various routes. Intended as a reference resource for researchers, academicians and industrialists in the area of energy, chemical engineering and biomass conversion, it provides a wealth of information essential for assessing the production and application of various biomass-derived platform chemicals using biological, chemical and electrochemical techniques.
Download or read book Rare Metal Technology 2020 written by Gisele Azimi and published by Springer Nature. This book was released on 2020-01-20 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from a symposium on extraction of rare metals as well as rare extraction processing techniques used in metal production. Rare metals include strategic metals that are in increasing demand and subject to supply risks. Metals represented include neodymium, dysprosium, scandium and others; platinum group metals including platinum, palladium, iridium, and others; battery related metals including lithium, cobalt, nickel, and aluminum; electronics-related materials including copper and gold; and refectory metals including titanium, niobium, zirconium, and hafnium. Other critical materials such as gallium, germanium, indium and silicon are also included. Papers cover various processing techniques, including but not limited to hydrometallurgy (solvent extraction, ion exchange, precipitation, and crystallization), electrometallurgy (electrorefining and electrowinning), pyrometallurgy, and aeriometallurgy (supercritical fluid extraction). Contributions are focused on primary production as well as secondary production through urban mining and recycling to enable a circular economy. A useful resource for all involved in commodity metal production, irrespective of the major metal Provides knowledge of cross-application among industries Extraction and processing of rare metals that are the main building block of many emerging critical technologies have been receiving significant attention in recent years. The technologies that rely on critical metals are prominent worldwide, and finding a way to extract and supply them effectively is highly desirable and beneficial.
Download or read book Handbook of Solvent Extraction written by Teh C. Lo and published by . This book was released on 1991-01-01 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Uranium Extraction Technology written by International Atomic Energy Agency and published by . This book was released on 1993 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this publication is to update and expand the first edition, which was published in 1983, and to report on later advances in uranium ore processing. It includes background information about the principles of the unit operations used in uranium ore processing and summarizes the current state of the art. Extensive references provide sources for specific technological details.
Download or read book Biological Activities and Application of Marine Polysaccharides written by Emad Shalaby and published by BoD – Books on Demand. This book was released on 2017-01-11 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine organisms have been under research for the last decades as a source for different active compounds with various biological activities and application in agriculture, pharmacy, medicine, environment, and industries. Marine polysaccharides from these active compounds are used as antibacterial, antiviral, antioxidant, anti-inflammation, bioremediations, etc. During the last three decades, several important factors that control the production of phytoplankton polysaccharides have been identified such as chemical concentrations, temperature, light, etc. The current book includes 14 chapters contributed by experts around the world; the chapters are categorized into three sections: Marine Polysaccharides and Agriculture, Marine Polysaccharides and Biological Activities, and Marine Polysaccharides and Industries.
