Download or read book Novel Approaches in Materials and Technologies for Building Construction written by Mohammad Arif Kamal and published by Materials Research Forum LLC. This book was released on 2024-02-10 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses the latest developments in the area of building constructions. Most of the building components such as columns, roofs and concrete blocks are available in prefabricated forms that increase the speed of construction processes. The goal is to engineer buildings that are sustainable, efficient, resilient, economically viable; and ensure the safety, health and comfort of occupants. New materials and technologies aim at energy efficiency, water conservation, improved indoor air quality, durability and low life cycle and maintenance costs. Keywords: Building Materials, Columns, Roofs, Concrete Blocks, Prefabricated Forms, Greenhouse Gas Emission, Energy Efficiency, Water Conservation, Air Quality, Life Cycle Cost, Maintenance Costs, Calcium Silicate Bricks, Autoclaved Aerated Concrete Blocks, Hydraform Interlocking Block Walling System, Reinforced Hollow Concrete Block Masonry, 3D Printing Technology, Structural Insulated Panels, Glass Fibre Reinforced Gypsum Panels, Monolithic Concrete Construction Technology, Formwork System for Building Construction, Insulated Roof, Wall Tiles, Metal Roofing System, Warehouses.

Download or read book Novel Approaches in Materials and Technologies for Building Construction written by Mohammad Arif Kamal and published by Materials Research Forum LLC. This book was released on 2024-02-10 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses the latest developments in the area of building constructions. Most of the building components such as columns, roofs and concrete blocks are available in prefabricated forms that increase the speed of construction processes. The goal is to engineer buildings that are sustainable, efficient, resilient, economically viable; and ensure the safety, health and comfort of occupants. New materials and technologies aim at energy efficiency, water conservation, improved indoor air quality, durability and low life cycle and maintenance costs. Keywords: Building Materials, Columns, Roofs, Concrete Blocks, Prefabricated Forms, Greenhouse Gas Emission, Energy Efficiency, Water Conservation, Air Quality, Life Cycle Cost, Maintenance Costs, Calcium Silicate Bricks, Autoclaved Aerated Concrete Blocks, Hydraform Interlocking Block Walling System, Reinforced Hollow Concrete Block Masonry, 3D Printing Technology, Structural Insulated Panels, Glass Fibre Reinforced Gypsum Panels, Monolithic Concrete Construction Technology, Formwork System for Building Construction, Insulated Roof, Wall Tiles, Metal Roofing System, Warehouses.

Download or read book Sustainable Construction Technologies written by Vivian Y. Tam and published by Butterworth-Heinemann. This book was released on 2019-01-03 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Construction Technologies: Life-Cycle Assessment provides practitioners with a tool to help them select technologies that are financially advantageous even though they have a higher initial cost. Chapters provide an overview of LCA and how it can be used in conjunction with other indicators to manage construction. Topics covered include indoor environment quality, energy efficiency, transport, water reuse, materials, land use and ecology, and more. The book presents a valuable tool for construction professionals and researchers that want to apply sustainable construction techniques to their projects. Practitioners will find the international case studies and discussions of worldwide regulation and standards particularly useful. Provides a framework for analyzing sustainable construction technologies and economic viability Introduces key credit criteria for different sustainable construction technologies Covers the most relevant construction areas Includes technologies that can be employed during the process of construction, or to the product of the construction process, i.e. buildings Analyzes international rating systems and provides supporting case studies

Download or read book Building Construction written by Madan Mehta and published by Prentice Hall. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The science of building construction and design is evolving more quickly than ever before. The second edition of this outstanding text builds on the previous version. It incorporates the latest updates available, features hundreds of new pieces of artwork, and is now in FULL COLOR! Written by an author team with decades of experience in architecture, building construction, engineering, and teaching, Building Construction: Principles, Materials & Systems 2nd Edition is a comprehensive and fully illustrated introduction to construction methods and materials. Continuing on with the books unique organization, Principles of Construction are covered in Part One and Materials and Systems of Construction are covered in Part Two. Emphasizing a visual approach to learning, it includes more than 1,400 original illustrations and an extra large trim size (9" x 12") that provides an open and inviting layout that readers are sure to appreciate. Plus! A completely revamped and expanded companion website, "MyConstructionKit", is also available!

Download or read book Building Construction written by Michael Lewis Smith and published by Prentice Hall. This book was released on 2012 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Text only. This product does NOT include a Resource Central Access Code Card. To purchase the text with a Resource Central Access Code Card, please use ISBN: 0-13-283007-8 Building Construction: Methods and Materials for the Fire Service, Second Edition, emphasizes the impact that an understanding of the principles of building construction has on firefighting strategy. Written by an author with extensive knowledge and experience in both the fire service and construction industries, it explains building materials and processes that are involved in the construction of structures and provides students with the knowledge required to operate safely and effectively within residential or commercial buildings. Discussions of actual incidents experienced by the author and case studies containing critical thinking questions give students a better understanding of what to expect in the field.

Download or read book Construction Methods And Technology Penerbit USM written by Hanizzam Awang and published by Penerbit USM. This book was released on 2016-06-17 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the most up-to-date and common construction methods and technologies for different types of buildings, alongside the key construction materials and properties needed to carry them out. The book offers comprehensive coverage of the necessary topics for students, engineers, contractors and other professionals in the field of construction. It presents the topics in a logical, well-structured format that follows the natural sequence of a construction project. It also emphasizes in providing the most innovative information available in site investigation and planning, safety, Industrialised Building System (IBS), construction materials, and so forth. This book provides general and specific information for all types of building construction, therefore, can be a reference book for all practitioners in the industry. Relevant building codes, particularly Malaysian Codes, are frequently referenced, rounding out this need-to-know coverage that is critical to success in the industry. Keywords: Universiti Sains Malaysia, Penerbit Universiti Sains Malayia, Penerbit USM

Download or read book Fundamentals of Building Construction written by Edward Allen and published by John Wiley & Sons. This book was released on 2019-08-28 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE #1 REFERENCE ON BUILDING CONSTRUCTION—UPDATED FROM THE GROUND UP Edward Allen and Joseph Iano’s Fundamentals of Building Construction has been the go-to reference for thousands of professionals and students of architecture, engineering, and construction technology for over thirty years. The materials and methods described in this new Seventh Edition have been thoroughly updated to reflect the latest advancements in the industry. Carefully selected and logically arranged topics—ranging from basic building methods to the principles of structure and enclosure—help readers gain a working knowledge of the field in an enjoyable, easy-to-understand manner. All major construction systems, including light wood frame, mass timber, masonry, steel frame, light gauge steel, and reinforced concrete construction, are addressed. Now in its Seventh Edition, Fundamentals of Building Construction contains substantial revisions and updates. New illustrations and photographs reflect the latest practices and developments in the industry. Revised chapters address exterior wall systems and high-performance buildings, an updated and comprehensive discussion of building enclosure science, evolving tools for assessing environmental and health impacts of building materials, and more. New and exciting developments in mass timber construction are also included. This Seventh Edition includes: 125 new or updated illustrations and photographs, as well as 40 new photorealistic renderings The latest in construction project delivery methods, construction scheduling, and trends in information technology affecting building design and construction Updated discussion of the latest LEED and Living Building Challenge sustainability standards along with expanded coverage of new methods for assessing the environmental impacts of materials and buildings Expanded coverage of mass timber materials, fire resistance of mass timber, and the design and construction of tall wood buildings Revised end-of-chapter sections, including references, websites, key terminology, review questions, and exercises Fully-updated collection of best-in-class ancillary materials: PowerPoint lecture slides, Instructor’s Manual, Test Bank, Interactive Exercises, and more Companion book, Exercises in Building Construction, available in print and eBook format For the nuts and bolts on building construction practices and materials, Fundamentals of Building Construction: Materials and Methods, 7th Edition lays the foundation that every architect and construction professional needs to build a successful career.

Download or read book Construction Materials Methods and Techniques written by William Perkins Spence and published by Cengage Learning. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prev. ed: Construction methods, materials, and techniques, Clifton Park, N.Y., Thomas Delmar Learning, c2006.

Download or read book Fundamentals of Building Construction written by Edward Allen and published by . This book was released on 1990 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the art of building, it has been revised and updated to reflect changes in the industry. Describes the materials used since ancient times—wood, stone, brick and the techniques by which they are made into buildings today—before proceeding to structural steel, reinforced and prestressed concrete, float glass, extruded aluminum, advanced gypsum products, synthetic rubber compounds and plastics. Deals with whole systems of building including foundations, framing, roofing, interiors, electrical and mechanical systems. Each chapter contains a summary, list of key terms and concepts, review questions and references. Illustrated with over 300 line drawings and 700 photographs.

Download or read book Novel Approaches to Carbon Management written by National Research Council and published by National Academies Press. This book was released on 2003-05-02 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt: The National Research Council's (NRC's) Committee on Novel Approaches to the Management of Greenhouse Gases from Energy Systems held a workshop at the Arnold and Mabel Beckman Center in Irvine, California, on February 12-14, 2003, to identify promising lines of research that could lead to currently unforeseen breakthroughs in the management of carbon from energy systems. The information identified by participants in the workshop will be used by the U.S. Department of Energy's (DOE's) Office of Fossil Energy (FE) to award grants for new research in carbon management. During the workshop, invited participants from a variety of disciplines contributed their expertise and creativity to addressing the problem of carbon management. The ideas developed during the workshop were synthesized into this report by the committee, which oversaw the organization and execution of the workshop. However, this workshop summary does not contain any committee conclusions or recommendations, but simply reports on research areas that were identified as promising during the workshop discussions. The purpose of the workshop, as noted, was to identify novel approaches to the management of carbon from energy systems. The workshop is part of a project conducted by the NRC for DOE's Office of Fossil Energy (DOE/FE). DOE/FE will consider the workshop report as it develops a solicitation to be issued in spring 2003. The solicitation will call for research proposals on enabling science and technology research on novel approaches for the management of carbon from energy systems. Chapters 2 through 6 of this report summarize the most promising new ideas on carbon management identified by each of the four subgroups at the workshop. In the respective chapters, the ideas are described, their significance is explained, and research opportunities are listed. Each chapter includes a statement of the scientific and engineering challenges related to its topic. Chapter 6 includes crosscutting issues not specific to one of the four subgroups. The chapters themselves do not include detailed analysis regarding feasibility, energy and mass balance, and so forth, as the workshop's time and scope did not permit this; it is assumed such analyses will be carried out in the research proposals that DOE funds.

Download or read book Innovation in Construction written by Seyed Hamidreza Ghaffar and published by Springer Nature. This book was released on 2022-03-23 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book tackles the complex topic of implementing innovation and the successful application of advanced technology in the construction industry. It provides a practical guide for the transformation of the industry by detailing appropriate and effective implementation methods, required skill sets and structural changes necessary to facilitate the practical and innovative application of technology. The construction industry is behind other industries in its level of innovation and adoption of technology, and is of critical importance to many of today’s global challenges, such as climate change, global warming and resource scarcity. There is therefore a need for smarter and more efficient ways of managing available resources. This book elaborates on how the innovative application of technology could offer hope for the construction industry in it’s imperative to rise to current and future global challenges. It includes the real-world case studies of innovative projects that go beyond the current state-of-the-art academic research, and have improved productivity, quality and performance in the construction sector. This book provides readers from both industrial and academic backgrounds with a comprehensive guide on transforming the construction industry with the efficient and effective implementation of technologies and modern methods of construction.

Download or read book Rethinking Building Skins written by Eugenia Gasparri and published by Woodhead Publishing. This book was released on 2021-12-05 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rethinking Building Skins: Transformative Technologies and Research Trajectories provides a comprehensive collection of the most relevant and forward-looking research in the field of façade design and construction today, with a focus on both product and process innovation. The book brings together the expertise, creativity, and critical thinking of more than fifty global innovators from both academia and industry, to guide the reader in translating research into practice. It identifies new opportunities for the construction sector to respond to present challenges, towards a more sustainable, efficient, connected, and safe future. Introduces the reader to the role of façades with respect to the main challenges ahead Provides an overview of the major façade technological advancements throughout history and identifies prospective research trajectories Includes interviews with key industry players from different backgrounds and expertise Showcases a comprehensive range of leading research topics in the field, organised by product and process innovation Covers major innovations across the value chain including façade design, fabrication, construction, operation and maintenance, and end-of-life Contributes towards the definition of an international research agenda and identifies emerging market opportunities for the façade industry

Download or read book Construction Methods Materials and Techniques written by William Perkins Spence and published by Delmar Thomson Learning. This book was released on 2006 with total page 1130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive in nature, this newly updated book extensively explores construction materials and properties as well as current methods of residential and commercial building construction. Revisions reflect the changes based on the 2004 Edition of Construction Specifications Institute (CSI) MasterFormat and follows the logical sequence of a construction project. The Second Edition is complete with current information that is the result of input from hundreds of manufacturers and professional and trade organizations, and makes frequent reference to building codes relating to various construction materials and methods.

Download or read book Materials for Construction and Civil Engineering written by M. Clara Gonçalves and published by Springer. This book was released on 2015-03-03 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: This expansive volume presents the essential topics related to construction materials composition and their practical application in structures and civil installations. The book's diverse slate of expert authors assemble invaluable case examples and performance data on the most important groups of materials used in construction, highlighting aspects such as nomenclature, the properties, the manufacturing processes, the selection criteria, the products/applications, the life cycle and recyclability, and the normalization. Civil Engineering Materials: Science, Processing, and Design is ideal for practicing architects; civil, construction, and structural engineers, and serves as a comprehensive reference for students of these disciplines. This book also: · Provides a substantial and detailed overview of traditional materials used in structures and civil infrastructure · Discusses properties of natural and synthetic materials in construction and materials' manufacturing processes · Addresses topics important to professionals working with structural materials, such as corrosion, nanomaterials, materials life cycle, not often covered outside of journal literature · Diverse author team presents expect perspective from civil engineering, construction, and architecture · Features a detailed glossary of terms and over 400 illustrations

Download or read book Building Construction written by Edward Allen and published by . This book was released on 1993-07 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "For the nuts-and-bolts on building construction practices and materials, thousands of professionals and students of architecture, engineering, and construction technology have turned to Edward Allen and Joseph Iano's Fundamentals of Building Construction. This new Fifth Edition of the bestselling reference and textbook provides the most up-to-date survey of the basic materials and methods used in building construction." "Using the latest building codes, standards, and developments in materials and technologies as its basis, this book covers the complete range of construction activities - from excavating and foundations to cladding and interior finishes - and examines common construction systems such as light wood frame, masonry bearing wall, steel frame, and reinforced concrete construction."--BOOK JACKET.

Download or read book Building Construction written by Madan Mehta and published by Pearson Educacion. This book was released on 2013 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: The science of building construction and design is evolving more quickly than ever before. The second edition of this outstanding text builds on the previous version. It incorporates the latest updates available, features hundreds of new pieces of artwork, and is now in FULL COLOR! Written by an author team with decades of experience in architecture, building construction, engineering, and teaching, Building Construction: Principles, Materials & Systems 2nd Edition is a comprehensive and fully illustrated introduction to construction methods and materials. Continuing on with the books unique organization, Principles of Construction are covered in Part One and Materials and Systems of Construction are covered in Part Two. Emphasizing a visual approach to learning, it includes more than 1,400 original illustrations and an extra large trim size (9" x 12") that provides an open and inviting layout that readers are sure to appreciate. Plus! A completely revamped and expanded companion website, "MyConstructionKit", is also available!

Download or read book Building Construction and Technology written by Vijayalaxmi J. and published by Springer Nature. This book was released on 2023-07-24 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights various aspects of building construction industry based on data from field studies. It discusses the challenges, methodologies, technological applications in building construction, technology, and management. The book presents new approaches to effective building construction and an understanding of the impact of applications of latest technologies. This book is aimed at researchers and professionals in civil engineering and building engineering management to assist in understanding the domain along with recent applications, the advantages, and practical limitations through real-life case studies. This book is useful for building engineers in understanding the effective use of technology, construction methods, and project delivery systems.