Download or read book Novel Applications in Polymers and Waste Management written by Badal Jageshwar Prasad Dewangan and published by CRC Press. This book was released on 2018-01-19 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on exciting new research in polymer science. The first section of the book deals with new advancements in polymer technology, which includes polymers that are responsible for progress in the field of energy, electronics, and medical sciences. It focuses on the most promising polymer nanocomposites and nanomaterials. Composites are becoming more important because they can help to improve quality of life. The second section of the book highlights this aspect of macromolecules, while the third section emphasizes biopolymers, their development, and applications.

Download or read book Polymer Waste Management written by Johannes Karl Fink and published by John Wiley & Sons. This book was released on 2018-08-28 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is literally awash with plastics and this book practically provides a broad overview of plastic recycling procedures and waste management. With the huge amount of plastics floating in the oceans, fish and other sea creatures are directly suffering the consequences. On land, city leaders and planners are banning one-use plastics as well as plastic bags from grocery stores in an effort to stem the use. Many countries have made official announcements and warnings concerning the pollution caused from plastic wastes. These urgent developments have stimulated the author to study the problem and write Polymer Waste Management. Plastic recycling refers to a method that retrieves the original plastic material. However, there are many sophisticated methods available for the treatment and management of waste plastics such as basic primary recycling, where the materials are sorted and collected individually. In chemical recycling, the monomers and related compounds are processed by special chemical treatments. Other methods, such as pyrolysis, can produce fuels from waste plastics. These methods and others are treated comprehensively in the book. This groundbreaking book also discusses: General aspects, such as amount of plastics production, types of waste plastics, analysis procedures for identification of waste plastic types, standards for waste treatment, contaminants in recycled plastics. Environmental aspects, such as pollution in the marine environment and landfills. The advantages of the use of bio-based plastics. Recycling methods for individual plastic types and special catalysts.

Download or read book Polymers and the Environment written by G Scott and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: As environmental performance becomes increasingly important, the development of man-made polymers and their associated benefits has been overshadowed by problems relating to their ultimate disposal. In the light of wider acceptance of polymers for use in high technology applications, Polymers and the Environment aims to redress the balance. The book reviews the properties and industrial applications of polymers and discusses their environmental benefits compared with traditional materials. It also addresses the issues of polymer durability, recycling processes to aid waste minimization and biodegradable polymers. This text is intended to introduce the non-specialist reader to the benefits and limitations of polymeric materials from an environmental viewpoint, and will prove a useful book for both students and professionals.

Download or read book Advanced Processing Properties and Applications of Starch and Other Bio based Polymers written by Faris M. Al-Oqla and published by Elsevier. This book was released on 2020-08-15 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Processing, Properties, and Applications of Starch and Other Bio-based Polymers presents the latest cutting-edge research into the processing and applications of bio-based polymers, for novel industrial applications across areas including biomedical and electronics. The book is divided into three sections, covering processing and manufacture, properties, and applications. Throughout the book, key aspects of sustainability are considered, including improved utilization of available natural resources, sustainable design possibilities, cleaner production processes, and waste management. Focuses on starch-based polymers, examining the latest advances in processing and applications with this valuable category of biopolymer Highlights industrial sustainability considerations at all steps of the process, including when sourcing materials, designing and producing products, and dealing with waste Supports the processing and development of starch and other bio-based polymers with enhanced functionality for advanced applications

Download or read book Degradable Polymers Recycling and Plastics Waste Management written by Albertsson and published by CRC Press. This book was released on 1995-07-07 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the International Workshop on Controlled Life-Cycle of Polymeric Materials held in Stockholm, this work examines degradable polymers and the recycling of plastic materials. It highlights recent results on recycling and waste management, including topics such as renewable resources, degradation, processing and products, and environmental is

Download or read book Compostable Polymer Materials written by Ewa Rudnik and published by Newnes. This book was released on 2019-06-04 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compostable Polymer Materials, Second Edition, deals with the environmentally important family of polymers designed to be disposed of in industrial and municipal compost facilities after their useful life. These compostable plastics undergo degradation and leave no visible, distinguishable, or toxic residue. Environmental concerns and legislative measures taken in different regions of the world make composting an increasingly attractive route for the disposal of redundant polymers.This book covers the entire spectrum of preparation, degradation, and evironmental issues related to compostable polymers. It emphasizes recent studies concerning compostability and ecotoxilogical assessment of polymer materials. It descibes the thermal behavior, including flammability properties, of compostable polymers. It also explores possible routes of compostable polymers waste disposal through an ecological lens. Finally, the book examines the economic factors at work, including price evolution over the past decade, the current market, and future perspectives. Compostable Polymer Materials is an essential resource for graduate students and scientists working in chemistry, materials science, ecology, and environmental science. - Provides a comprehensive study of the composting process - Details methods of compostable polymers preparation, including properties, processing and applications - Presents the state-of-the-art knowledge on ecotoxicity testing and biodegradation under real composting conditions of compostable polymers, as well as biodegradation in various environments, such as marine environments and anaerobic conditions - Discusses the evolution of waste management in Europe and the United States, as well as the status of MSW disposal and treatment methods in countries such as China and Brazil - Overviews biodegradation studies under real composting conditions of products made of compostable polymers, e.g. bags, bottles, cutletry - Analyzes evolution of market development, including price of compostable polymers during the last decade

Download or read book Plastic Films in Food Packaging written by Sina Ebnesajjad and published by William Andrew. This book was released on 2012-12-31 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: The value of the groceries purchases in the USA is over $500 billion annually, most of which is accounted for by packaged foods. Plastic packaging of foods is not only ubiquitous in developed economies, but increasingly commonplace in the developing world, where plastic packaging is instrumental in decreasing the proportion of the food supply lost to spoilage. This new handbook is a combination of new material and updated chapters, chosen by Dr. Sina Ebnesajjad, from recently published books on this subject. Plastic Films in Food Packaging offers a practical handbook for engineers, scientists and managers working in the food packaging industry, providing a tailor-made package of science and engineering fundamentals, best practice techniques and guidance on new and emerging technologies. By covering materials, design, packaging processes, machinery and waste management together in one book, the authors enable the reader to take a lifecycle approach to food packaging. The Handbook addresses questions related to film grades, types of packages for different types of foods, packaging technologies, machinery and waste management. Additionally the book provides a review of new and emerging technologies. Two chapters cover the development of barrier films for food packaging and the regulatory and safety aspects of food packaging. - Essential information and practical guidance for engineers and scientists working at all stages of the food packaging lifecycle: from design through manufacture to recycling - Includes key published material on plastic films in food packaging, updated specifically for this Handbook, and new material on the regulatory framework and safety aspects - Coverage of materials and applications together in one handbook enables engineers and scientists to make informed design and manufacturing decisions

Download or read book Carbon based Polymer Nanocomposites for Environmental and Energy Applications written by Ahmad Fauzi Ismail and published by Elsevier. This book was released on 2018-03-28 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon-Based Polymer Nanocomposites for Environmental and Energy Applications provides the fundamental physico-chemical characterizations of recently explored carbon-based polymer nanocomposites, such as carbon nanotubes, graphene and its derivatives, nanodiamond, fullerenes and other nano-sized carbon allotropes. The book also covers the applications of carbon-based polymer nanocomposite in the environmental and energy fields. Topics range from the various approaches that have been explored and developed for the fabrication of carbon-based polymer nanocomposite, to their applications in tackling environmental and energy related issues. - Provides a clear picture of the current state-of-the-art and future trends in carbon-based polymer nanomaterials - Explains the interactions between nanofiller-polymer matrices and mechanisms related to applications in environmental pollution and energy shortage - Includes computational and experimental studies of the physical and chemical properties of carbon-based polymer nanocomposites - Features chapters written by world leading experts

Download or read book The Effect of Sterilization on Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2018-02-22 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Effect of Sterilization Methods on Plastics and Elastomers, Fourth Edition brings together a wide range of essential data on the sterilization of plastics and elastomers, thus enabling engineers to make optimal material choices and design decisions. The data tables in this book enable engineers and scientists to select the right materials and sterilization method for a given product or application. The book is a unique and essential reference for anybody working with plastic materials that are likely to be exposed to sterilization methods, be it in medical device or packaging development, food packaging or other applications. - Presents essential data and practical guidance for engineers and scientists working with plastics in applications that require sterile packaging and equipment - Updated edition removes obsolete data, updates manufacturers, verifies data accuracy, and adds new plastics materials for comparison - Provides essential information and guidance for FDA submissions required for new medical devices

Download or read book Management of Marine Plastic Debris written by Michael Niaounakis and published by William Andrew. This book was released on 2017-07-04 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Management of Marine Plastic Debris gives a thorough and detailed presentation of the global problem of marine plastics debris, covering every aspect of its management from tracking, collecting, treating and commercial exploitation for handing this anthropogenic waste. The book is a unique, essential source of information on current and future technologies aimed at reducing the impact of plastics waste in the oceans. This is a practical book designed to enable engineers to tackle this problem—both in stopping plastics from getting into the ocean in the first place, as well as providing viable options for the reuse and recycling of plastics debris once it has been recovered. The book is essential reading not only for materials scientists and engineers, but also other scientists involved in this area seeking to know more about the impact of marine plastics debris on the environment, the mechanisms by which plastics degrade in water and potential solutions. While much research has been undertaken into the different approaches to the increasing problem of plastics marine debris, this is the first book to present, evaluate and compare all of the available techniques and practices, and then make suggestions for future developments. The book also includes a detailed discussion of the regulatory environment, including international conventions and standards and national policies. - Reviews all available processes and techniques for recovering, cleaning and recycling marine plastic debris - Presents and evaluates viable options for engineers to tackle this growing problem, including the use of alternative polymers - Investigates a wide range of possible applications of marine plastics debris and opportunities for businesses to make a positive environmental impact - Includes a detailed discussion of the regulatory environment, including international conventions and standards and national policies

Download or read book Recycling of Polyethylene Terephthalate Bottles written by Sabu Thomas and published by William Andrew. This book was released on 2018-10-29 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycling of Polyethylene Terephthalate Bottles provides an overview of PET chemistry, highlighting the main degradation, depolymerization processes and pathways of PET, along with the applications of recycled monomers derived from PET waste. The latest methodologies of recycling and feedstock recovery are covered, providing critical foundational information. In addition, the book discusses a range of established methods of polymer recycling, with an emphasis on real world industrial case studies and the latest academic research. Users will find in-depth lifecycle and cost analysis of each waste management method, comparing the suitability and feasibility of each to support the decision -making process. Polyethylene Terephthalate (PET) is the most recycled plastic in the world, but still represents a significant amount of landfill waste. This book presents an update on new regulations, providing recommendations for new opportunities in this area, including new processing methods and applications for recycled PET. - Features a comprehensive introduction to the waste management of PET bottles, from regulatory concerns, to the range of different methods of materials recovery - Enables practitioners to choose the most efficient and effective waste management process - Includes detailed lifecycle and cost analysis information - Compares traditional thermal recycling methods with more recently developed monomer recovery and chemical recycling methods

Download or read book Recycling of Flexible Plastic Packaging written by Michael Niaounakis and published by William Andrew. This book was released on 2019-12-04 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycling of Flexible Plastic Packaging presents thorough and detailed information on the management and recycling of flexible plastic packaging, focusing on the latest actual/potential methods and techniques and offering actionable solutions that minimize waste and increase product efficiency and sustainability. Sections cover flexible plastic packaging and its benefits, applications and challenges. This is followed by in-depth coverage of the materials, types and forms of flexible packaging. Other key discussions cover collection and pre-treatment, volume reduction, separation from other materials, chemical recycling, post-processing and reuse, current regulations and policies, economic aspects and immediate trends. This information will be highly valuable to engineers, scientists and R&D professionals across industry. In addition, it will also be of great interest to researchers in academia, those in government, or anyone with an interest in recycling who is looking to further advance and implement recycling methods for flexible plastic packaging. - Presents state-of-the-art methods and technologies regarding the processing of flexible plastic packaging waste - Addresses the challenges currently associated with both waste management and available recycling methods - Opens the door to innovation, supporting improved recycling methods, manufacturing efficiency and industrial sustainability

Download or read book Recycling of Polyurethane Foams written by Sabu Thomas and published by William Andrew. This book was released on 2018-06-06 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycling of Polyurethane Foams introduces the main degradation/depolymerization processes and pathways of polyurethane foam materials, focusing on industrial case studies and academic reviews from recent research and development projects. The book can aid practitioners in understanding the basis of polymer degradation and its relationship with industrial processes, which can be of substantial value to industrial complexes the world over. The main pathways of polymer recycling via different routes and industrial schemes are detailed, covering all current techniques, including regrinding, rebinding, adhesive pressing and compression moulding of recovered PU materials that are then compared with depolymerization approaches. The book examines life cycle assessment and cost analysis associated with polyurethane foams waste management, showing the potential of various techniques. This book will help academics and researchers identify and improve on current depolymerization processes, and it will help industry sustainability professionals choose the appropriate approach for their own waste management systems, thus minimizing the costs and environmental impact of their PU-based end products. - Offers a comprehensive review of all polyurethane foam recycling processes, including both chemical and mechanical approaches - Assesses the potential of each recycling process - Helps industry-based practitioners decide which approach to take to minimize the cost and environmental impact of their end product - Enables academics and researchers to identify and improve upon current processes of degradation and depolymerization

Download or read book Polylactic Acid written by Lee Tin Sin and published by William Andrew. This book was released on 2019-06-15 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polylactic Acid: A Practical Guide for the Processing, Manufacturing, and Applications of PLA, Second Edition, provides a practical guide for engineers and scientists working in PLA and on the development of emerging new products. The current market situation for PLA and biodegradable polymers is described, along with applications across a range of market sectors. In addition, the mechanical, chemical, thermal, rheology and degradation properties are included. Updates include new chapters covering various processing methods, as well as recycling methods, and additives and processing aids. New applications cover a range of products (including 3D Printing), and an environmental assessment, including regulatory aspects. The book is not only a useful introduction to this topic, but also a practical, readily applicable reference book that will support decision-making in the plastics industry. - Presents an essential reference for engineers, scientists and product designers considering switching to a sustainable plastic - Covers the properties, synthesis and polymerization of PLA, along with processing techniques involved in fabricating parts from this polymer - Includes critical new chapters on processing, additives, recycling and environmental considerations relating to PLA

Download or read book Solid Waste Engineering and Management written by Lawrence K. Wang and published by Springer Nature. This book was released on 2022-06-24 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the third volume in a three-volume set on Solid Waste Engineering and Management. It focuses on tourism industry waste, rubber tire recycling, electrical and electronic wastes, health-care waste, landfill leachate, bioreactor landfill, energy recovery, innovative composting, biodrying, and health and safety considerations pertaining to solid waste management.. The volumes comprehensively discuss various contemporary issues associated with solid waste pollution management, impacts on theenvironmental and vulnerable human populations, and solutions to these problems.

Download or read book Phthalonitrile Resins and Composites written by Mehdi Derradji and published by William Andrew. This book was released on 2018-04-25 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phthalonitrile Resins and Composites: Properties and Applications summarizes the latest research on these polymers, providing information that enables materials scientists and engineers to deploy these polymers in the real world. The book gives details on synthesis and preparation techniques for key phthalonitrile monomers. All curing techniques are discussed, along with blends and copolymers of phthalonitrile with other polymeric materials, such as epoxy, benzoxazine and bismaleimide. Fiber and particle based phthalonitrile micro and nanocomposites are also discussed, along with their potential applications in lightweight automobiles, ships, oil rigs, aircraft, wind blades, high temperature bearings, valves, battery and electronic casings, fire resistant textiles, and more. - Introduces the subject of phthalonitrile polymers and their composites - Provides precise information on the synthesis, preparation and curing techniques for phthalonitrile polymers - Discusses developments in key application areas that are intended to facilitate and stimulate real world applications of these materials

Download or read book Plasticizers Derived from Post consumer PET written by Ewa Langer and published by William Andrew. This book was released on 2019-11-03 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticizers Derived from Postconsumer PET: Research Trends and Potential Applications presents a roadmap to the successful use of postconsumer PET to obtain plasticizers for later use, a proposal which presents both economic and sustainability advantages. Based on the results of the latest research into the development of chemical recycling techniques of PET waste, this book describes techniques where the plasticizer obtained can be utilized for value addition in PVC and other polymers. In addition, the book provides basic introductory information on the role of plasticizers in the modification of polymers, basic quality requirements, and the latest trends in the synthesis and use of plasticizers in industry, also presenting the available methods of PET recycling, with particular emphasis on chemical recycling, analysis of the PET market, the availability of postconsumer PET, and its value as a raw material for other products. Based on the authors' research, the book discusses the use of postconsumer PET in the synthesis of monomeric and oligomeric plasticizers. Synthesis conditions are shown in detail, and the influence of the structure of synthesized softeners on their basic quality parameters are assessed and compared with selected commercially available products. In the final sections, the book covers the economic challenges and benefits of this process and its application to newly developed products. - Presents a step-by-step introduction to the methods of recycling PET into usable plasticizers - Provides a viable, actionable alternative to landfills for postconsumer PET, enabling the recycling of more waste polymer and reducing the carbon footprint of PET - Analyzes the economic benefits and challenges of this process - Compares the quality of the output to commercially available products