Download or read book Novel Acoustic Emission Signal Processing Methods for Bearing Condition Monitoring written by Yanhui Feng and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Condition Monitoring and Control for Intelligent Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2006-08-02 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition modelling and control is a technique used to enable decision-making in manufacturing processes of interest to researchers and practising engineering. Condition Monitoring and Control for Intelligent Manufacturing will be bought by researchers and graduate students in manufacturing and control and engineering, as well as practising engineers in industries such as automotive and packaging manufacturing.
Download or read book Rolling Element Bearing Condition Monitoring Using Acoustic Emission Technique and Advanced Signal Processing written by Farzad Hemmati and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Condition Monitoring of Gearboxes Using Acoustic Emission written by Babak Eftekharnejad and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustic emission (AE) is one of many technologies for health monitoring and diagnosis of rotating machines such as gearboxes. Although significant research has been undertaken in understanding the potential of AE in monitoring gearboxes this has been solely applied to spur gears and slow speed roller bearings. This research presents an experimental investigation that assesses the effectiveness of both AE and vibration technologies in identifying various types of defects on in a helical gearbox; the first known attempt. Furthermore, the application of advanced signals processing techniques such as Spectral kurtosis (SK) and wavelet analysis were studied on AE and vibration signatures. It is shown that the application of advanced signal processing methods is particularly necessary for monitoring helical gears. The application of SK and wavelet analysis was found to be effective in denoising the acquired signals. The first chapter of this thesis is an introduction to this research and briefly explains motivation and theoretical background supporting this research. The second chapter summaries the relevant literature to establish the current level of the knowledge in this field. The third chapter describes methodologies and experimental arrangement utilized for this investigation. Chapter 4 discusses helical gear diagnosis for both natural and seeded surface defect. Chapter 5 reports on an experimental investigation in which several technologies such as AE, vibration and motor current signature analysis, were applied to identify the presence of a naturally fatigued pinion shaft in an operating gearbox. Chapter 6 details an investigation which compared the applicability of AE and vibration technologies in monitoring a naturally degraded roller bearing. It has been concluded that AE is a strong diagnostic tool for early diagnosis of bearings faults. However, the application of condition monitoring for helical gear diagnosis was fraught with some degree of complexity as compared to spur gears. This implies that condition monitoring of the gears using AET can be challenging. On the contrary, the applicability of AET for bearing diagnosis was promising and it offered an absolute advantage over the conventional vibrationdiagnosis. Furthermore, the application advanced signals processing methods such as Spectral Kurtosis and wavelet was found to be promising in denoise the recorded AE signals. It was also concluded that the use of different signal processing methods is often necessary to achieve meaningful diagnostic information from the signals.
Download or read book Structural Health Monitoring Damage Detection Systems for Aerospace written by Markus G. R. Sause and published by Springer Nature. This book was released on 2021 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents established methods of structural health monitoring (SHM) and discusses their technological merit in the current aerospace environment. While the aerospace industry aims for weight reduction to improve fuel efficiency, reduce environmental impact, and to decrease maintenance time and operating costs, aircraft structures are often designed and built heavier than required in order to accommodate unpredictable failure. A way to overcome this approach is the use of SHM systems to detect the presence of defects. This book covers all major contemporary aerospace-relevant SHM methods, from the basics of each method to the various defect types that SHM is required to detect to discussion of signal processing developments alongside considerations of aerospace safety requirements. It will be of interest to professionals in industry and academic researchers alike, as well as engineering students. This article/publication is based upon work from COST Action CA18203 (ODIN - http://odin-cost.com/), supported by COST (European Cooperation in Science and Technology). COST (European Cooperation in Science and Technology) is a funding agency for research and innovation networks. Our Actions help connect research initiatives across Europe and enable scientists to grow their ideas by sharing them with their peers. This boosts their research, career and innovation.
Download or read book Condition Monitoring and Diagnostic Engineering Management written by A. Starr and published by Elsevier. This book was released on 2001-09-14 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings contains the papers presented at the 14th International Conference on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2001), held in Manchester, UK, on 4-6 September 2001. COMADEM 2001 builds on the excellent reputation of previous conferences in this series, and is essential for anyone working in the field of condition monitoring and maintenance management. The scope of the conference is truly interdisciplinary. The Proceedings contains papers from six continents, written by experts in industry and academia the world over, bringing together the latest thoughts on topics including: Condition-based maintenance Reliability centred maintenance Asset management Industrial case studies Fault detection and diagnosis Prognostics Non-destructive evaluation Integrated diagnostics Vibration Oil and debris analysis Tribology Thermal techniques Risk assessment Structural health monitoring Sensor technology Advanced signal processing Neural networks Multivariate statistics Data compression and fusion This Proceedings also contains a wealth of industrial case studies, and the latest developments in education, training and certification. For more information on COMADEM's aims and scope, please visit http://www.comadem.com
Download or read book Advances in Acoustic Emission Technology written by Gongtian Shen and published by Springer Nature. This book was released on 2021-03-26 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents articles from the World Conference on Acoustic Emission 2019 (WCAE-2019) held at Guangdong, China. The latest research and applications of acoustic emission (AE) are explored, with a particular emphasis on detecting and processing AE signals, the development of AE instrument and testing standards, AE of materials, engineering structures and systems, including the processing of collected data and analytical techniques. Numerous case studies are also included. It brings together leading academicians and professionals in the field to foster collaboration and to enhance research in this important area, with wide ranging applications.
Download or read book Handbook of Condition Monitoring written by B. K. N. Rao and published by Elsevier. This book was released on 1996 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. The need to reduce costs has generated a greater interest in condition monitoring in recent years. The Handbook of Condition Monitoring gives an extensive description of available products and their usage making it a source of practical guidance supported by basic theory.This handbook has been designed to assist individuals within companies in the methods and devices used to monitor the condition of machinery and products.
Download or read book Acoustic Emission Beyond the Millennium written by T. Kishi and published by Elsevier. This book was released on 2000-09-01 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theme of the 15th International Acoustic Emission Symposium (IAES15) was set as 'practicality for life-extension and maintenance of plants and structures'. Special emphasis was placed on the review of acoustic emission (AE) research and applications in the 20th century and its future in the 21st century. The technique for monitoring defects and abnormal vibrations due to machine failures is vitally important for the safety of structures in a modern society. AE, as a passive, rather than an active NDT method, has drawn much attention because of its applicability to on-stream surveillance of structures. One important point is its capability to acquire data very simply but with high sensitivity so that the development of a non-contact sensing technique is particularly important. A quantitative method to evaluate structural integrity and remaining life from the detected AE signals is strongly required. Quantitative analysis, based on inverse procedures, has provided a certain solution, but has not been utilized widely enough in structures due to its complexity. Its applicability is limited partly because the accuracy of solutions depends on noise levels and partly because the phenomenon is usually non-reproducible. AE is expected to be a next-generation technique not only to monitor conditions but also for the repair of damaged structures, combined with an active-adaptive technique using a 'solid state actuator'. 'Smart Materials and Structures' are known in this respect. AE is considered to be a very promising technique, together with such sensing techniques as optical fiber, shape memory alloy and electro-rheological fluid. Thus, AE can play a very important roll in monitoring, evaluating and repairing structures. In this workshop, a limited number of invited papers are presented for technical discussion to review the achievements of AE research and applications in the 20th century. The proceedings are entitled Acoustic Emission - Beyond the Millennium to celebrate the new millennium, and stepping forward to a new era. The authors and topics of these review papers were selected by the editorial board.
Download or read book The Acoustic Emission Ultrasonic Monitoring Handbook written by Trevor J. Holroyd and published by . This book was released on 2000 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for those using, wishing to use, or wishing to understand, the use of Acoustic Emissions/Ultrasonics applied to the condition monitoring of industrial machinery. This technique provides a relatively easy way to improve monitoring of traditionally awkward items such as plain bearings, slow speed machinery, worm/wheel gears and machines of either unknown design or for which there have been no previous measurements. This is a practical book, touching on the basic theory and concepts, available equipment and practical issues relevant to the engineer as well as highlighting several case studies with which the reader can relate. The book is laid out in such a way that its chapters and sections follow a logical order for those wishing to read from cover to cover, but more importantly it can be used for quick reference purposes on a topic by topic basis.
Download or read book Advances in Acoustic Emission Technology written by Gongtian Shen and published by Springer. This book was released on 2019-06-04 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects the papers from the World Conference on Acoustic Emission 2017 (WCAE-2017) in Xi'an, China. The latest research and applications of acoustic emission (AE) are explored, with a particular emphasis on detecting and processing AE signals, the development of AE instrument and testing standards, AE of materials, engineering structures and systems, including the processing of collected data and analytical techniques. Numerous case studies are also included. This proceedings volume will appeal to students, professors and researchers working in these fields as physicists and/or engineers.
Download or read book Advances in Condition Monitoring and Structural Health Monitoring written by Len Gelman and published by Springer Nature. This book was released on 2021-02-02 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the selected contributions from the 2nd World Congress on Condition Monitoring (WCCM 2019), held in Singapore in December 2019. The contents focus on digitalisation for condition monitoring with the emergence of the fourth industrial revolution (Industry 4.0) and the Industrial Internet-of-Things (IIoT). The book covers latest research findings in the areas of condition monitoring, structural health monitoring, and non-destructive testing which are relevant for many sectors including aerospace, automotive, civil, oil and gas, marine, and manufacturing industries. Different monitoring systems and non-destructive testing methods are discussed to avoid failures, increase lifespans, and reduce maintenance costs of equipment and machinery. The broad scope of the contents will make this book interesting for academics and professionals working in the areas of non-destructive evaluation and condition monitoring.
Download or read book Novel Algorithms and Techniques in Telecommunications Automation and Industrial Electronics written by Tarek Sobh and published by Springer Science & Business Media. This book was released on 2008-08-15 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel Algorithms and Techniques in Telecommunications, Automation and Industrial Electronics includes a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the areas of Industrial Electronics, Technology and Automation, Telecommunications and Networking. Novel Algorithms and Techniques in Telecommunications, Automation and Industrial Electronics includes selected papers form the conference proceedings of the International Conference on Industrial Electronics, Technology and Automation (IETA 2007) and International Conference on Telecommunications and Networking (TeNe 07) which were part of the International Joint Conferences on Computer, Information and Systems Sciences and Engineering (CISSE 2007).
Download or read book Acoustic Emission Analysis for Bearing Condition Monitoring written by Mohd Helmi Rasid and published by . This book was released on 2013 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustic emission (AE) was originally developed for non-destructive testing of static structures, however, over the years its application has been extended to health monitoring of rotating machines and bearings. It offers the advantage of earlier defect detection in comparison to vibration analysis. Current methodologies of applying AE for bearing diagnosis are reviewed. The investigation reported in this paper was centered on the application of standard acoustic emissions (AE) characteristic parameters on a rotational speed. An experimental test-rig was designed to allow seeded defects on the inner race, corrode and contaminated defect. It is concluded that irrespective of the rotational speed and high levels of background noise, simple AE parameters such as amplitude and AE counts provided an indications of bearing defect. In addition to validating already established AE techniques, this investigation focuses on establishing an appropriate threshold level for AE counts.
Download or read book Acoustic Emission Testing written by Christian U. Grosse and published by Springer Science & Business Media. This book was released on 2008-07-12 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustic Emission (AE) techniques have been studied in civil engineering for a long time. The techniques are recently going to be more and more applied to practical applications and to be standardized in the codes. This is because the increase of aging structures and disastrous damages due to recent earthquakes urgently demand for maintenance and retrofit of civil structures in service for example. It results in the need for the development of advanced and effective inspection techniques. Thus, AE techniques draw a great attention to diagnostic applications and in material testing. The book covers all levels from the description of AE basics for AE beginners (level of a student) to sophisticated AE algorithms and applications to real large-scale structures as well as the observation of the cracking process in laboratory specimen to study fracture processes.
Download or read book Intelligent Acoustic Emission Sensing in Machining for Tool Condition Monitoring written by Chi-Liang Jiaa and published by . This book was released on 1989 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effective Vibration based Signal Processing Methods for Condition Monitoring and Fault Diagnosis of Rolling Bearings written by 樊薇 and published by . This book was released on 2018 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt:
