Download or read book Failure Analysis of Heat Treated Steel Components written by Lauralice de Campos Franceschini Canale and published by ASM International. This book was released on 2008 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Carbon Graphite Diamonds and Fullerenes written by Hugh O. Pierson and published by William Andrew. This book was released on 2012-12-02 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a review of the science and technology of the element carbon and its allotropes: graphite, diamond and the fullerenes. This field has expanded greatly in the last three decades stimulated by many major discoveries such as carbon fibers, low-pressure diamond, and the fullerenes. The need for such a book has been felt for some time. These carbon materials are very different in structure and properties. Some are very old (charcoal), others brand new (the fullerenes). They have different applications and markets and are produced by different segments of the industry.Few studies are available that attempt to review the entire field of carbon as a whole discipline. Moreover these studies were written several decades ago and a generally outdated since the development of the technology is moving very rapidly and scope of applications is constantly expanding and reaching into new fields such as aerospace, automotive, semiconductors, optics, and electronics. In this book the author provides a valuable, up-to-date account of both the newer and traditional forms of carbon, both naturally occurring and man-made. This volume will be a valuable resource for both specialists in, and occasional users of carbon materials.

Download or read book Introduction to Physical Metallurgy written by Sidney Avner and published by . This book was released on 1990-06-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies

Download or read book Corrosion Science and Technology written by David E.J. Talbot and published by CRC Press. This book was released on 2018-01-29 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty years after its first publication, Corrosion Science and Technology continues to be a relevant practical guide for students and professionals interested in material science. This Third Edition thoroughly covers the basic principles of corrosion science in the same reader-friendly manner that made the previous edition invaluable, and enlarges the scope of the content with expanded chapters on processes for various metals and new technologies for limiting costs and metal degradation in a variety of commercial enterprises not explored in previous editions. This book also presents expertly developed methods of corrosion testing and prediction.

Download or read book Handbook of Corrosion Engineering written by Pierre Roberge and published by McGraw-Hill Prof Med/Tech. This book was released on 1999-09-30 with total page 1154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reduce the enormous economic and environmental impact of corrosion Emphasizing quantitative techniques, this guide provides you with: *Theory essential for understanding aqueous, atmospheric, and high temperature corrosion processes Corrosion resistance data for various materials Management techniques for dealing with corrosion control, including life prediction and cost analysis, information systems, and knowledge re-use Techniques for the detection, analysis, and prevention of corrosion damage, including protective coatings and cathodic protection More

Download or read book Ductile Iron Handbook written by Al Alagarsamy and published by . This book was released on 1992 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Failures written by K. Elayaperumal and published by John Wiley & Sons. This book was released on 2015-04-27 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides corrosion basics in a lucid manner to students and working professionals and over 80 corrosion-failure analysis case studies Correlates Failure Analysis with Corrosion Science Exclusively provides corrosion-related failure analysis case histories in one place in a convenient format One-stop shop for both science and real time occurrence of the phenomenon of corrosion Full coverage of all MOC, Materials of Construction, used for process equipments Simple but Lucid presentation of Failure Analysis procedure

Download or read book Microstructure of Steels and Cast Irons written by Madeleine Durand-Charre and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprises three parts. Part 1 gives a historical description of the development of ironworking techniques since the earliest times. Part 2 is the core of the book and deals with the metallurgical basis of microstructures, with four main themes: phase diagrams, solidification processes, diffusion, and solid state phase transformations. Part 3 begins by an introduction to steel design principles. It then goes on to consider the different categories of steels, placing emphasis on their specific microstructural features. Finally, a comprehensive reference list includes several hundred pertinent articles and books. The book is the work of a single author, thus ensuring uniformity and concision. It is intended for scientists, metallurgical engineers and senior technicians in research and development laboratories, design offices and quality departments, as well as for teachers and students in universities, technical colleges and other higher education establishments.

Download or read book Handbook of Engineering Practice of Materials and Corrosion written by Jung-Chul (Thomas) Eun and published by Springer Nature. This book was released on 2020-09-04 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an in-depth guide to the practical aspects of materials and corrosion engineering in the energy and chemical industries. The book covers materials, corrosion, welding, heat treatment, coating, test and inspection, and mechanical design and integrity. A central focus is placed on industrial requirements, including codes, standards, regulations, and specifications that practicing material and corrosion engineers and technicians face in all roles and in all areas of responsibility. The comprehensive resource provides expert guidance on general corrosion mechanisms and recommends materials for the control and prevention of corrosion damage, and offers readers industry-tested best practices, rationales, and case studies.

Download or read book Carbon Reinforcements and Carbon Carbon Composites written by E. Fitzer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced composite materials have been a major research focus for the past forty years. As a reinforcement for conventional materials including glass, ceramics and polymers, carbon has proved to be the most successful. Carbon gives these materials flexibility so that they may be produced in bulk form with a wide variety of properties. Whereas carbon/carbon composites are the most effective materials in extreme temperature conditions. Application ranges from brakes to missile nose cones. Carbon Reinforcements and Carbon/Carbon Composites gives the present state on this subject in comprehensive form, as well as projections for other "High Tech" materials and their application.

Download or read book Carbon Allotropes Metal Complex Chemistry Properties and Applications written by Boris Ildusovich Kharisov and published by Springer. This book was released on 2019-01-02 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed description of metal-complex functionalized carbon allotrope forms, including classic (such as graphite), rare (such as M- or T-carbon), and nanoforms (such as carbon nanotubes, nanodiamonds, etc.). Filling a void in the nanotechnology literature, the book presents chapters generalizing the synthesis, structure, properties, and applications of all known carbon allotropes. Metal-complex composites of carbons are described, along with several examples of their preparation and characterization, soluble metal-complex carbon composites, cost-benefit data, metal complexes as precursors of carbon allotropes, and applications. A lab manual on the synthesis and characterization of carbon allotropes and their metal-complex composites is included. Provides a complete description of all carbon allotropes, both classic and rare, as well as carbon nanostructures and their metal-complex composites; Contains a laboratory manual of experiments on the synthesis and characterization of metal-complex carbon composites; Discusses applications in diverse fields, such as catalysis on supporting materials, water treatment, sensors, drug delivery, and devices.

Download or read book The Physical Metallurgy of Cast Iron written by H. Fredriksson and published by North Holland. This book was released on 1985 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the Third International Symposium on the Physical Metallurgy of Cast Iron, discusses solidification of cast iron alloys, solid state transformation in cast iron alloys, and the relationship between microstructure and mechanical properties. Also examined are newly developed alloys, and new trends in cast iron research. Based on basic knowledge of the physical metallurgy of cast iron, this volume is a valuable reference source for physical metallurgists, foundry and mechanical engineers and materials scientists.

Download or read book Piping Handbook written by Mohinder L. Nayyar and published by McGraw Hill Professional. This book was released on 1999-11-04 with total page 2520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instant answers to your toughest questions on piping components and systems! It's impossible to know all the answers when piping questions are on the table - the field is just too broad. That's why even the most experienced engineers turn to Piping Handbook, edited by Mohinder L. Nayyar, with contribution from top experts in the field. The Handbook's 43 chapters--14 of them new to this edition--and 9 new appendices provide, in one place, everything you need to work with any type of piping, in any type of piping system: design layout selection of materials fabrication and components operation installation maintenance This world-class reference is packed with a comprehensive array of analytical tools, and illustrated with fully-worked-out examples and case histories. Thoroughly updated, this seventh edition features revised and new information on design practices, materials, practical applications and industry codes and standards--plus every calculation you need to do the job.

Download or read book A Dictionary of Mining Mineral and Related Terms written by United States. Bureau of Mines and published by . This book was released on 1968 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes about 55,000 individual mining and mineral industry term entries with about 150,000 definitions under these terms.

Download or read book Coal Geology written by Larry Thomas and published by John Wiley & Sons. This book was released on 2020-07-13 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: A global exploration of coal geology, from production and use to chemical properties and coal petrology Coal Geology, 3rd Edition, offers a revised and updated edition of this popular book which provides a comprehensive overview of the field of coal geology including coal geophysics, hydrogeology and mining. Also covered in this volume are fully revised coverage of resource and reserve definitions, equipment and recording techniques together with the use of coal as an alternative energy source as well as environmental implications. This third edition provides a textbook ideally suited to anyone studying, researching or working in the field of coal geology, geotechnical engineering and environmental science. Fills the gap between academic aspects of coal geology and the practical role of geology in the coal industry Examines sedimentological and stratigraphical geology, together with mining, geophysics, hydrogeology, environmental issues and coal marketing Defines global coal resource classifications and methods of calculation Addresses the alternative uses of coal as a source of energy Covers a global approach to coal producers and consumers

Download or read book Frontiers in Materials Rising Stars written by Nicola Maria Pugno and published by Frontiers Media SA. This book was released on 2020-04-17 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Frontiers in Materials Editorial Office team are delighted to present the inaugural “Frontiers in Materials: Rising Stars” article collection, showcasing the high-quality work of internationally recognized researchers in the early stages of their independent careers. All Rising Star researchers featured within this collection were individually nominated by the Journal’s Chief Editors in recognition of their potential to influence the future directions in their respective fields. The work presented here highlights the diversity of research performed across the entire breadth of the materials science and engineering field, and presents advances in theory, experiment and methodology with applications to compelling problems. This Editorial features the corresponding author(s) of each paper published within this important collection, ordered by section alphabetically, highlighting them as the great researchers of the future. The Frontiers in Materials Editorial Office team would like to thank each researcher who contributed their work to this collection. We would also like to personally thank our Chief Editors for their exemplary leadership of this article collection; their strong support and passion for this important, community-driven collection has ensured its success and global impact. Laurent Mathey, PhD Journal Development Manager