Download or read book Notch Effects in Fatigue and Fracture written by G. Pluvinage and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: As Directors of this NATO Workshop, we welcome this opportunity to record formally our thanks to the NATO Scientific Affairs Division for making our meeting possible through generous financial support and encouragement. This meeting has two purposes: the first obvious one because we have collected scientists from East, far East and west to discuss new development in the field of fracture mechanics: the notch fracture mechanics. The second is less obvious but perhaps in longer term more important that is the building of bridges between scientists in the frame of a network called Without Walls Institute on Notch Effects in Fatigue and Fracture". Physical perception of notch effects is not so easy to understand as the presence of a geometrical discontinuity as a worst effect than the simple reduction of cross section. Notch effects in fatigue and fracture is characterised by the following fundamental fact: it is not the maximum local stress or stress which governs the phenomena of fatigue and fracture. The physic shows that a process volume is needed probably to store the necessary energy for starting and propagating the phenomenon. This is a rupture of the traditional "strength of material" school which always give the prior importance of the local maximum stress. This concept of process volume was strongly affirmed during this workshop.

Download or read book Theory of Elasticity and Stress Concentration written by Yukitaka Murakami and published by John Wiley & Sons. This book was released on 2016-09-13 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory of Elasticity and Stress Concentration Yukitaka Murakami, Kyushu University, Japan A comprehensive guide to elasticity and stress concentration Theory of Elasticity and Stress Concentration comprehensively covers elasticity and stress concentration and demonstrates how to apply the theory to practical engineering problems. The book presents a new approach to the topic without the need for complicated mathematics, and the principles and meaning of stress concentration are covered without reliance on numerical analysis. The book consists of two parts: Part I - Theory of Elasticity and Part II - Stress Concentration. Part I treats the theory of elasticity from the viewpoint of helping the reader to comprehend the essence of it. Part II treats the principle and meaning of stress concentration and guides the reader to a better understanding of it. Throughout the book, many useful and interesting applications of the basic new way of thinking are presented and explained. Key features: Unique approach to the topics. Encourages the readers to acquire the new way of thinking and engineering judgement. Includes examples, problems and solutions. This book provides essential reading for researchers and practitioners in the structural and mechanical engineering industries.

Download or read book Theory of Notch Stresses written by Heinz Neuber and published by . This book was released on 1946 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Notch Effect to the Fatigue Life written by Weng Khuin Teh and published by . This book was released on 2013 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis is about the study on the notch effect to the fatigue life on the ASTM 1018 mild steel by using theoretical approach and experiment. The objective of this thesis is to study notch effect to the fatigue life. The thesis describes the stress concentration present on the notched specimen and its effect to the fatigue life on the specimen. The structural three-dimensional solid modeling of both smooth and notched specimen was developed by using the computer aided drawing software, SOLIDWORK 2012. The finite element analysis on the stress distribution was then performed by utilizing MSC NASTRAN. The maximum stress for specimens also was found by calculation using formula. The fatigue lives of both smooth and notched specimens were predicted by calculation using stress-life approach. Manson's approach on notched specimen also used to predict the fatigue for notched specimens. The fabrication for both smooth and notched specimen is conducted by utilizing the computer numerical control lathe machine. Then, the fabricated specimens are tested in rotating bending fatigue by using fatigue test machine. The results were analysis by comparing to theoretical results and found that Manson's approach is the more accurate way to predict the fatigue life for notched specimens. From the results, it found that the notched specimen will have a lot shorter fatigue life compared to the smooth specimen also the fatigue characteristic for both smooth and notch specimen is proven to be different from the observation of distinct fatigue behavior of them.

Download or read book The Theory of Critical Distances written by David Taylor and published by Elsevier. This book was released on 2010-07-07 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Critical distance methods are extremely useful for predicting fracture and fatigue in engineering components. They also represent an important development in the theory of fracture mechanics. Despite being in use for over fifty years in some fields, there has never been a book about these methods – until now. So why now? Because the increasing use of computer-aided stress analysis (by FEA and other techniques) has made these methods extremely easy to use in practical situations. This is turn has prompted researchers to re-examine the underlying theory with renewed interest. The Theory of Critical Distances begins with a general introduction to the phenomena of mechanical failure in materials: a basic understanding of solid mechanics and materials engineering is assumed, though appropriate introductory references are provided where necessary. After a simple explanation of how to use critical distance methods, and a more detailed exposition of the methods including their history and classification, the book continues by showing examples of how critical distance approaches can be applied to predict fracture and fatigue in different classes of materials. Subsequent chapters include some more complex theoretical areas, such as multiaxial loading and contact problems, and a range of practical examples using case studies of real engineering components taken from the author's own consultancy work. The Theory of Critical Distances will be of interest to a range of readers, from academic researchers concerned with the theoretical basis of the subject, to industrial engineers who wish to incorporate the method into modern computer-aided design and analysis. - Comprehensive collection of published data, plus new data from the author's own laboratories - A simple 'how-to-do-it' exposition of the method, plus examples and case studies - Detailed theoretical treatment - Covers all classes of materials: metals, polymers, ceramics and composites - Includes fracture, fatigue, fretting, size effects and multiaxial loading

Download or read book Fracture and Fatigue Emanating from Stress Concentrators written by G. Pluvinage and published by Springer Science & Business Media. This book was released on 2003-12-31 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: A vast majority of failures emanate from stress concentrators such as geometrical discontinuities. The role of stress concentration was first highlighted by Inglis (1912) who gives a stress concentration factor for an elliptical defect, and later by Neuber (1936). With the progress in computing, it is now possible to compute the real stress distribution at a notch tip. This distribution is not simple, but looks like pseudo-singularity as in principle the power dependence with distance remains. This distribution is governed by the notch stress intensity factor which is the basis of Notch Fracture Mechanics. Notch Fracture Mechanics is associated with the volumetric method which postulates that fracture requires a physical volume. Since fatigue also needs a physical process volume, Notch Fracture Mechanics can easily be extended to fatigue emanating from a stress concentration.

Download or read book Fatigue of Structures and Materials written by J. Schijve and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.

Download or read book Effect of Notches on Low cycle Fatigue written by B. M. Wundt and published by ASTM International. This book was released on 1972 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Fatigue Effects of Small Defects and Nonmetallic Inclusions written by Yukitaka Murakami and published by Elsevier. This book was released on 2002-04-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal fatigue is an essential consideration for engineers and researchers who are looking at factors that cause metals to fail through stress, corrosion, etc. This is an English translation of a book originally published in Japan in 1993, with an additional two chapters on the fatigue failure of steels and the effect of surface roughness on fatigue strength. The methodology is based on important and reliable results and may be usefully applied to other fatigue problems not directly treated in this book.

Download or read book Multiaxial Notch Fatigue written by Luca Susmel and published by Elsevier. This book was released on 2009-03-20 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal and composite components used in structural engineering not only contain geometrical features resulting in stress concentration phenomena, but they are also subjected to in-service multiaxial fatigue loading. To address the problem, structural engineers need reliable methodologies which allow for an adequate margin of safety. The book summarises methods devised by the author to design real components against multiaxial fatigue by taking full advantage not only of nominal but also of local stress-strain quantities.The book begins by reviewing definitions suitable for calculating the stress-strain quantities commonly used to perform fatigue assessment. The Modified Wöhler Curve Method is then explained in detail, by focusing attention on both the high- and the medium-cycle fatigue regime. The existing links between the multiaxial fatigue criterion and physical properties are also discussed. A procedure suitable for employing the method developed by the author to estimate fatigue damage both in notched and in welded components is explained. The Modified Manson-Coffin Curve method is investigated in depth, by reviewing those concepts playing a fundamental role in the so-called strain based approach. Lastly, the problem of performing the fatigue assessment of composite materials is addressed by considering design parameters influencing composite behaviour under complex cyclic loading paths and those criteria suitable for designing real components against multiaxial fatigue. The book also contains two appendices summarising experimental data from the technical literature. These appendices provide a unique and highly valuable resource for engineers. The appendices summarise around 100 values of the material characteristic length L, experimentally determined by testing specimens made of different engineering materials and about 4500 experimental fatigue results generated by testing plain, notched and welded specimens under constant-amplitude proportional and non-proportional multiaxial fatigue loading are listed. - Summarises methods devised by the author to design real components against multiaxial fatigue - Reviews definitions suitable for calculating the stress-strain quantities commonly used to perform fatigue assessment - Includes an in-depth explanation of both the Modified Wöhler Curve and Modified Manson-Coffin Curve Method

Download or read book Fatigue Strength Calculation written by A. Buch and published by Trans Tech Publications Ltd. This book was released on 1988-01-01 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal design using advanced materials is an ever more progressive and challenging domain within applied mechanics. Here is an invaluable self-contained source of information concerning methods of calculation of fatigue limits and lifetimes of structural elements. While in most texts the treatment of this subject is confined merely to a phenomenological approach, this book provides the essential knowledge for an analytical treatment of design problems as well as a unique collection of appropriate data sheets which are required for the quantitative application of accepted design recommendations.

Download or read book Analysis of the Notch Effect in Fatigue written by K. Yanase and published by . This book was released on 2012 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fatigue-crack propagation at stress concentrations is a topic of significant importance in a number of engineering applications. Further, it is recognized that the fatigue limit of notched components is dictated by the critical condition for either initiation or propagation of a small crack at the root of a notch. Moreover, because most fatigue cracks spend the vast majority of their lives as short cracks, the behavior of such a flaw is of significant importance. In the literature, McEvily and co-workers [McEvily, A. J., Eifler, D., and Macherauch, E., "An analysis of the Fatigue Growth of Short Fatigue Cracks," Eng. Fract. Mech., Vol. 40, No. 3, 1991, pp. 571-584] developed a modified linear elastic fracture mechanics (LEFM) approach to tackle a number of fatigue problems, including the growth and threshold behavior of small fatigue cracks. In this study, a further extension is presented to deal with notch effects in fatigue. In this method, the elastic-plastic behavior and the crack closure are taken into account, as the major factors responsible for the peculiar behavior of small fatigue cracks emanating from notches. In the present paper, the notch effect in fatigue is systematically investigated by making use of a mechanism-based computational framework. A series of parametric studies demonstrate the predictive capability of the proposed framework. Based on the thorough investigation for notch-fatigue problem, the novelty of present study is illustrated.

Download or read book Fatigue Damage written by Filippo Berto and published by MDPI. This book was released on 2018-07-02 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Fatigue Damage" that was published in Metals

Download or read book Fatigue Life Analyses of Welded Structures written by Tom Lassen and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Avoiding or controlling fatigue damage is a major issue in the design and inspection of welded structures subjected to dynamic loading. Life predictions are usually used for safe life analysis, i.e. for verifying that it is very unlikely that fatigue damage will occur during the target service life of a structure. Damage tolerance analysis is used for predicting the behavior of a fatigue crack and for planning of in-service scheduled inspections. It should be a high probability that any cracks appearing are detected and repaired before they become critical. In both safe life analysis and the damage tolerance analysis there may be large uncertainties involved that have to be treated in a logical and consistent manner by stochastic modeling. This book focuses on fatigue life predictions and damage tolerance analysis of welded joints and is divided into three parts. The first part outlines the common practice used for safe life and damage tolerance analysis with reference to rules and regulations. The second part emphasises stochastic modeling and decision-making under uncertainty, while the final part is devoted to recent advances within fatigue research on welded joints. Industrial examples that are included are mainly dealing with offshore steel structures. Spreadsheets which accompany the book give the reader the possibility for hands-on experience of fatigue life predictions, crack growth analysis and inspection planning. As such, these different areas will be of use to engineers and researchers.

Download or read book The Effect of Notch Angle on the Low Cycle Fatigue Life of Single Edge notched Rectangular Specimens written by Dennis W. Baird and published by . This book was released on 1971 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Fatigue written by Thomas James Dolan and published by . This book was released on 1959 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Atlas of Fatigue Curves written by Howard E. Boyer and published by ASM International. This book was released on 1985-12-31 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains more than 500 fatigue curves for industrial ferrous and nonferrous alloys. Also includes an explanation of fatigue testing and interpretation of test results. Each curve is presented independently and includes an explanation of its particular importance.