Download or read book Nonwood Fibre Applications in Papermaking written by Graham Moore and published by . This book was released on 1996 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-wood fibres such as straw, reed, bagasse, flax and hemp have and are being used in papermaking operations worldwide. Recent changes in agricultural policies and in global environmental pressures have refocused attention on the range of non-wood options available. This review examines the impact of recent changes in terms of raw material sources and assesses their potential as papermaking fillers.
Download or read book Pulp and Paper Processing written by Salim Newaz Kazi and published by BoD – Books on Demand. This book was released on 2018-10-03 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives emphasis to wood fiber raw materials, alternative sources of fibers for paper production, environmental issues, paper quality improvement and cost of paper production. Varieties of non-wood raw materials, including kenaf, rice straw, empty fruit bunches of palm trees, bamboo, bagasse, etc., are considered in this book. The process of fiber treatment also varied to meet paper quality improvement. Different organosolv processes of fiber treatment are discussed. Considering contemporary issues, one particular chapter analyzes the environmentally friendly way of processing non-wood fibers for paper production. The book also contains a chapter on the by-product raw materials of paper production and their profitable applications.
Download or read book Nonwood Plant Fibers for Pulp and Paper written by Pratima Bajpai and published by Elsevier. This book was released on 2021-01-30 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonwood Plant Fibers for Pulp and Paper examines the use of nonwood plant fibers for pulp and paper, worldwide pulping capacity of nonwood fibers, categories of non-wood raw materials, problems associated with the utilization of non-wood fibers, pulping, bleaching, chemical recovery and papermaking of nonwood raw materials, the use of nonwood plant fibers in specific paper and paperboard grades, and the advantages and drawbacks of using nonwood fiber for papermaking and future prospects. This book gives professionals in the field the most up-to-date and comprehensive information on the state-of- the-art techniques and aspects involved in pulp and paper making from nonwood plant fibers. Provides comprehensive coverage on all aspects of pulping and papermaking of non-wood fibers Covers the latest science and technology in pulping and papermaking of non-wood fibers Focuses on biotechnological methods, a distinguishing feature of this book and its main attraction Presents valuable references related to the pulp and papermaking industry
Download or read book Nonwood Plant Fibers for Pulp and Paper written by Pratima Bajpai and published by Elsevier. This book was released on 2021-01-09 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonwood Plant Fibers for Pulp and Paper examines the use of nonwood plant fibers for pulp and paper, worldwide pulping capacity of nonwood fibers, categories of non-wood raw materials, problems associated with the utilization of non-wood fibers, pulping, bleaching, chemical recovery and papermaking of nonwood raw materials, the use of nonwood plant fibers in specific paper and paperboard grades, and the advantages and drawbacks of using nonwood fiber for papermaking and future prospects. This book gives professionals in the field the most up-to-date and comprehensive information on the state-of- the-art techniques and aspects involved in pulp and paper making from nonwood plant fibers. - Provides comprehensive coverage on all aspects of pulping and papermaking of non-wood fibers - Covers the latest science and technology in pulping and papermaking of non-wood fibers - Focuses on biotechnological methods, a distinguishing feature of this book and its main attraction - Presents valuable references related to the pulp and papermaking industry
Download or read book Pulping and Papermaking of Nonwood Plant Fibers written by Z.M.A. Ainun and published by Elsevier. This book was released on 2023-04-01 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulping and Papermaking of Non-wood Plant Fibres presents the latest technologies associated with the papermaking process. With chapters specific to each non-wood species, the book provides step-by-step guidance on processes such as pulping, bleaching, blending and beating. Non-wood fibers are practical for pulp and paper production due to their chemical content of cellulose, hemicellulose and lignin percentages. Beginning with a general overview of non-wood fibers in the papermaking process, chapters then take a deep dive into different raw materials and their processes, including bamboo, corn stalk, pineapple leaves and sugarcane. This book is an essential resource for researchers, scientists and industry specialists. - Provides comprehensive coverage of the processes involved in pulp and papermaking technology for each species of non-wood raw materials - Written by the leading research and industrial experts in the field of pulping, bleaching, blending, beating and papermaking processes - Includes step-by-step processes and methodologies
Download or read book Handbook of Pulping and Papermaking written by Christopher J. Biermann and published by Elsevier. This book was released on 1996-08-01 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: In its Second Edition, Handbook of Pulping and Papermaking is a comprehensive reference for industry and academia. The book offers a concise yet thorough introduction to the process of papermaking from the production of wood chips to the final testing and use of the paper product. The author has updated the extensive bibliography, providing the reader with easy access to the pulp and paper literature. The book emphasizes principles and concepts behind papermaking, detailing both the physical and chemical processes. - A comprehensive introduction to the physical and chemical processes in pulping and papermaking - Contains an extensive annotated bibliography - Includes 12 pages of color plates
Download or read book Pulping and Papermaking of Nonwood Plant Fibres written by Z.M.A. Ainun and published by Elsevier. This book was released on 2023-03-15 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulping and Papermaking of Non-wood Plant Fibres presents the latest technologies associated with the papermaking process. With chapters specific to each non-wood species, the book provides step-by-step guidance on processes such as pulping, bleaching, blending and beating. Non-wood fibers are practical for pulp and paper production due to their chemical content of cellulose, hemicellulose and lignin percentages. Beginning with a general overview of non-wood fibers in the papermaking process, chapters then take a deep dive into different raw materials and their processes, including bamboo, corn stalk, pineapple leaves and sugarcane. This book is an essential resource for researchers, scientists and industry specialists. Provides comprehensive coverage of the processes involved in pulp and papermaking technology for each species of non-wood raw materials Written by the leading research and industrial experts in the field of pulping, bleaching, blending, beating and papermaking processes Includes step-by-step processes and methodologies
Download or read book Morphology of Wood Pulp Fiber from Softwoods and Influence on Paper Strength written by Richard A. Horn and published by . This book was released on 1974 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: To achieve full utilization of each harvested tree, interest centers on use of all of the tree components. The objective of the study is to determine the influence of the morphological characteristics of pulp fiber from 12 western U.S. softwood species, representative of a wide range of fiber. The effect of the morphology of the wood pulp fiber as distinguished from that of the wood fiber is emphasized because differences in performance of fiber-based products are traced to the pulp fiber. Interrelationships of fiber morphology and pulp sheet properties are discussed. The results indicate that it is not possible to fully characterize the performance of a pulp by a single morphological characteristic and that the morphological characteristics significantly influence strength properties of sheets.
Download or read book Pulp and Paper Chemistry and Technology written by Monica Ek and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Papermaking Fibres written by Francis Metcalf Bolam and published by . This book was released on 1961 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pulp and Paper Processing written by Salim Newaz Kazi and published by . This book was released on 2018 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives emphasis to wood fiber raw materials, alternative sources of fibers for paper production, environmental issues, paper quality improvement and cost of paper production. Varieties of non-wood raw materials, including kenaf, rice straw, empty fruit bunches of palm trees, bamboo, bagasse, etc., are considered in this book. The process of fiber treatment also varied to meet paper quality improvement. Different organosolv processes of fiber treatment are discussed. Considering contemporary issues, one particular chapter analyzes the environmentally friendly way of processing non-wood fibers for paper production. The book also contains a chapter on the by-product raw materials of paper production and their profitable applications.
Download or read book Potential of the Non Wood Fibre Paper Sector 8068iied written by International Institute for Environment & Development and published by IIED. This book was released on 1996 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fine Structure of Papermaking Fibres written by European Cooperation in Science and Technology and published by . This book was released on 2011 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sugarcane based Biofuels and Bioproducts written by Ian O'Hara and published by John Wiley & Sons. This book was released on 2016-05-16 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sugarcane has garnered much interest for its potential as a viable renewable energy crop. While the use of sugar juice for ethanol production has been in practice for years, a new focus on using the fibrous co-product known as bagasse for producing renewable fuels and bio-based chemicals is growing in interest. The success of these efforts, and the development of new varieties of energy canes, could greatly increase the use of sugarcane and sugarcane biomass for fuels while enhancing industry sustainability and competitiveness. Sugarcane-Based Biofuels and Bioproducts examines the development of a suite of established and developing biofuels and other renewable products derived from sugarcane and sugarcane-based co-products, such as bagasse. Chapters provide broad-ranging coverage of sugarcane biology, biotechnological advances, and breakthroughs in production and processing techniques. This text brings together essential information regarding the development and utilization of new fuels and bioproducts derived from sugarcane. Authored by experts in the field, Sugarcane-Based Biofuels and Bioproducts is an invaluable resource for researchers studying biofuels, sugarcane, and plant biotechnology as well as sugar and biofuels industry personnel.
Download or read book Fiber Atlas written by Marja-Sisko Ilvessalo-Pfäffli and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This richly-illustrated book presents the information necessary for fiber analysis in the field of pulp and paper. A discussion of raw-material structure and the features used for species identification in pulp is followed up by the description of 117 fiber species. Of these, 83 are wood fibers and 34 are of nonwood origin. The tree species range across all five continents, 29 from Eurasia, 38 from North America and 16 from the southern hemisphere and the tropics. Informative micrographs, identification tables, and distribution maps aid species differentiation, making this atlas ideal for everyone interested in fiber identification.
Download or read book Biotechnology for Pulp and Paper Processing written by Pratima Bajpai and published by Springer. This book was released on 2018-02-14 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides the most up-to-date information available on various biotechnological processes useful in the pulp and paper industry. The first edition was published in 2011, covering a specific biotechnological process or technique, discussing the advantages, limitations, and prospects of the most important and popular processes used in the industry. Many new developments have taken place in the last five years, warranting a second edition on this topic. The new edition contains about 35% new material covering topics in Laccase application in fibreboard; biotechnology in forestry; pectinases in papermaking; stickies control with pectinase; products from hemicelluloses; value added products from biorefinery lignin; use of enzymes in mechanical pulping.
Download or read book Encyclopedia of Plant and Crop Science Print written by RobertM. Goodman and published by Routledge. This book was released on 2004-02-27 with total page 1365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Plant and Crop Science is the first-ever single-source reference work to inclusively cover classic and modern studies in plant biology in conjunction with research, applications, and innovations in crop science and agriculture. From the fundamentals of plant growth and reproduction to developments in agronomy and agricultural science, the encyclopedia's authoritative content nurtures communication between these academically distinct yet intrinsically related fields-offering a spread of clear, descriptive, and concise entries to optimally serve scientists, agriculturalists, policy makers, students, and the general public. ALSO AVAILABLE ONLINE This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for both researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options For more information, visit Taylor and Francis Online or contact us to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367 / (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062 / (E-mail) [email protected]
