Download or read book Nonlinear Vibration Reduction written by Albert C. J. Luo and published by Springer Nature. This book was released on 2022-11-30 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tuned mass damper is one of the classic dynamic vibration absorbers with effective devices for energy dissipation and vibration reduction. The electromagnetically tuned mass damper system is extensively used for vibration reduction in engineering. A better understanding of the nonlinear dynamics of the electromagnetically tuned mass damper system is very important to optimize the parameters of such systems for vibration reduction. However, until now, one cannot fully understand complex periodic motions in such a nonlinear, electromagnetically tuned mass damper system. In this book, the semi-analytical solutions of periodic motions are presented through period-1, period-3, period-9, and period-12 motions. The corresponding stability and bifurcations of periodic motions are determined. The frequency-amplitude characteristics for bifurcation routes of such higher-order periodic motions are presented. This book helps people better understand the dynamical behaviors of an electromagnetically tuned mass damper system for the new development and design of vibration reduction and energy harvesting systems.
Download or read book Harmonic Balance for Nonlinear Vibration Problems written by Malte Krack and published by Springer. This book was released on 2019-03-23 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents an introduction to Harmonic Balance for nonlinear vibration problems, covering the theoretical basis, its application to mechanical systems, and its computational implementation. Harmonic Balance is an approximation method for the computation of periodic solutions of nonlinear ordinary and differential-algebraic equations. It outperforms numerical forward integration in terms of computational efficiency often by several orders of magnitude. The method is widely used in the analysis of nonlinear systems, including structures, fluids and electric circuits. The book includes solved exercises which illustrate the advantages of Harmonic Balance over alternative methods as well as its limitations. The target audience primarily comprises graduate and post-graduate students, but the book may also be beneficial for research experts and practitioners in industry.
Download or read book Nonlinear Vibrations and Stability of Shells and Plates written by Marco Amabili and published by Cambridge University Press. This book was released on 2008-01-14 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book explores both theoretical and experimental aspects of nonlinear vibrations and stability of shells and plates. It is ideal for researchers, professionals, students, and instructors. Expert researchers will find the most recent progresses in nonlinear vibrations and stability of shells and plates, including advanced problems of shells with fluid-structure interaction. Professionals will find many practical concepts, diagrams, and numerical results, useful for the design of shells and plates made of traditional and advanced materials. They will be able to understand complex phenomena such as dynamic instability, bifurcations, and chaos, without needing an extensive mathematical background. Graduate students will find (i) a complete text on nonlinear mechanics of shells and plates, collecting almost all the available theories in a simple form, (ii) an introduction to nonlinear dynamics, and (iii) the state of art on the nonlinear vibrations and stability of shells and plates, including fluid-structure interaction problems.
Download or read book Advanced Nonlinear Strategies for Vibration Mitigation and System Identification written by Alexander F. Vakakis and published by Springer Science & Business Media. This book was released on 2011-01-27 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume address advanced nonlinear topics in the general areas of vibration mitigation and system identification, such as, methods of analysis of strongly nonlinear dyanmical systems; techniques and methodologies for interpreting complex, multi-frequency transitions in damped nonlinear responses; new approaches for passive vibration mitigation based on nonlinear targeted energy transfer (TET) and the associated concept of nonlinear energy sink (NES); and an overview and assessment of current nonlinear system identification techniques.
Download or read book Energy Harvesting Technologies written by Shashank Priya and published by Springer Science & Business Media. This book was released on 2008-11-28 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Harvesting Technologies provides a cohesive overview of the fundamentals and current developments in the field of energy harvesting. In a well-organized structure, this volume discusses basic principles for the design and fabrication of bulk and MEMS based vibration energy systems, theory and design rules required for fabrication of efficient electronics, in addition to recent findings in thermoelectric energy harvesting systems. Combining leading research from both academia and industry onto a single platform, Energy Harvesting Technologies serves as an important reference for researchers and engineers involved with power sources, sensor networks and smart materials.
Download or read book Nonlinear Targeted Energy Transfer in Mechanical and Structural Systems written by Alexander F. Vakakis and published by Springer Science & Business Media. This book was released on 2008-12-24 with total page 1030 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph evolved over a period of nine years from a series of papers and presentations addressing the subject of passive vibration control of mechanical s- tems subjected to broadband, transient inputs. The unifying theme is Targeted - ergy Transfer – TET, which represents a new and unique approach to the passive control problem, in which a strongly nonlinear, fully passive, local attachment, the Nonlinear Energy Sink – NES, is employed to drastically alter the dynamics of the primary system to which it is attached. The intrinsic capacity of the properly - signed NES to promote rapid localization of externally applied (narrowband) - bration or (broadband) shock energy to itself, where it can be captured and dis- pated, provides a powerful strategy for vibration control and the opens the pos- bility for a wide range of applications of TET, such as, vibration and shock i- lation, passive energy harvesting, aeroelastic instability (?utter) suppression, se- mic mitigation, vortex shedding control, enhanced reliability designs (for ex- ple in power grids) and others. The monograph is intended to provide a thorough explanation of the analytical, computational and experimental methods needed to formulate and study TET in mechanical and structural systems. Several prac- cal engineering applications are examined in detail, and experimental veri?cation and validation of the theoretical predictions are provided as well. The authors also suggest a number of possible future applications where application of TET seems promising. The authors are indebted to a number of sponsoring agencies.
Download or read book Nonlinear Vibration with Control written by David Wagg and published by Springer. This book was released on 2014-11-03 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive discussion of nonlinear multi-modal structural vibration problems, and shows how vibration suppression can be applied to such systems by considering a sample set of relevant control techniques. It covers the basic principles of nonlinear vibrations that occur in flexible and/or adaptive structures, with an emphasis on engineering analysis and relevant control techniques. Understanding nonlinear vibrations is becoming increasingly important in a range of engineering applications, particularly in the design of flexible structures such as aircraft, satellites, bridges, and sports stadia. There is an increasing trend towards lighter structures, with increased slenderness, often made of new composite materials and requiring some form of deployment and/or active vibration control. There are also applications in the areas of robotics, mechatronics, micro electrical mechanical systems, non-destructive testing and related disciplines such as structural health monitoring. Two broader themes cut across these application areas: (i) vibration suppression – or active damping – and, (ii) adaptive structures and machines. In this expanded 2nd edition, revisions include: An additional section on passive vibration control, including nonlinear vibration mounts. A more in-depth description of semi-active control, including switching and continuous schemes for dampers and other semi-active systems. A complet e reworking of normal form analysis, which now includes new material on internal resonance, bifurcation of backbone curves and stability analysis of forced responses. Further analysis of the nonlinear dynamics of cables including internal resonance leading to whirling. Additional material on the vibration of systems with impact friction. The book is accessible to practitioners in the areas of application, as well as students and researchers working on related topics. In particular, the aim is to introduce the key concepts of nonlinear vibration to readers who have an understanding of linear vibration and/or linear control, but no specialist knowledge in nonlinear dynamics or nonlinear control.
Download or read book Vibration Engineering for a Sustainable Future written by Sebastian Oberst and published by Springer Nature. This book was released on 2021-04-22 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the proceedings of the Asia-Pacific Vibration Conference (APVC) 2019, "Vibration Engineering for a Sustainable Future," emphasizing work devoted to numerical simulation and modelling. The APVC is one of the larger conferences held biannually with the intention to foster scientific and technical research collaboration among Asia-Pacific countries. The APVC provides a forum for researchers, practitioners, and students from, but not limited to, areas around the Asia-Pacific countries in a collegial and stimulating environment to present, discuss and disseminate recent advances and new findings on all aspects of vibration and noise, their control and utilization. All aspects of vibration, acoustics, vibration and noise control, vibration utilization, fault diagnosis and monitoring are appropriate for the conference, with the focus this year on the vibration aspects in dynamics and noise & vibration. This 18th edition of the APVC was held in November 2019 in Sydney, Australia. The previous seventeen conferences have been held in Japan (‘85, ’93, ‘07), Korea (’87, ’97, ‘13), China (’89, ’01, ’11, ‘17), Australia (’91, ‘03), Malaysia (’95, ‘05), Singapore (‘99), New Zealand (‘09) and Vietnam (‘15).
Download or read book Passive Vibration Isolation written by Eugene I. Rivin and published by Professional Engineering Publishing. This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provides a comprehensive treatment of the principles of design and means for realization of passive vibration isolation systems for real life objects. A special emphasis is given to effective techniques and methods that are not yet widely used in the practice of vibration isolation in industry." "The book is written with practitioners in mind and many of the problems addressed and the solutions presented are relevant not only to the isolation of stationary sensitive equipment (the main thrust of the book), but also to civil engineering and transport applications."--BOOK JACKET.
Download or read book Advances in Applied Nonlinear Dynamics Vibration and Control 2021 written by Xingjian Jing and published by Springer Nature. This book was released on 2021-09-23 with total page 1210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is to provide readers with up-to-date advances in applied and interdisciplinary engineering science and technologies related to nonlinear dynamics, vibration, control, robotics, and their engineering applications, developed in the most recent years. All the contributed chapters come from active scholars in the area, which cover advanced theory & methods, innovative technologies, benchmark experimental validations and engineering practices. Readers would benefit from this state-of-the-art collection of applied nonlinear dynamics, in-depth vibration engineering theory, cutting-edge control methods and technologies, and definitely find stimulating ideas for their on-going R&D work. This book is intended for graduate students, research staff and scholars in academics, and also provides useful hand-up guidance for professional and engineers in practical engineering missions.
Download or read book Vibration Control For Optomechanical Systems written by Vyacheslav M Ryaboy and published by World Scientific. This book was released on 2021-11-29 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration presents a major challenge to advanced experiments and technological processes in engineering, physics and life sciences that rely on optics and optoelectronics. This compendium discusses ways in which vibration may affect optical performance and describes methods and means of reducing this impact. Principal methods of vibration control, namely, damping and isolation are highlighted using mathematical models and real-life examples.The unique text covers some topics that are important for optomechanical applications but are lacking in general vibration texts, such as dynamics and stability of elastically supported systems with high centers of gravity, physics of pneumatic isolators, and application of dynamic absorbers to vibration-isolated systems.This useful reference book enables the reader to apply the vibration control tools properly and perform basic analytical and experimental tasks of estimating and verifying their performance. It is also a must-have textbook for undergraduate or graduate-level courses in vibration control and optomechanics.Related Link(s)
Download or read book Advances in Applied Nonlinear Dynamics Vibration and Control 2023 written by Xingjian Jing and published by Springer Nature. This book was released on with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Vibration Testing and System Dynamics written by Jan Awrejcewicz and published by L& H Scientific Publishing. This book was released on 2018-07-01 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration Testing and System Dynamics is an interdisciplinary journal serving as the forum for promoting dialogues among engineering practitioners and research scholars. As the platform for facilitating the synergy of system dynamics, testing, design, modeling, and education, the journal publishes high-quality, original articles in the theory and applications of dynamical system testing. The aim of the journal is to stimulate more research interest in and attention for the interaction of theory, design, and application in dynamic testing. Manuscripts reporting novel methodology design for modelling and testing complex dynamical systems with nonlinearity are solicited. Papers on applying modern theory of dynamics to real-world issues in all areas of physical science and description of numerical investigation are equally encouraged. Progress made in the following topics are of interest, but not limited, to the journal: Vibration testing and designDynamical systems and controlTesting instrumentation and controlComplex system dynamics in engineeringDynamic failure and fatigue theoryChemical dynamics and bio-systemsFluid dynamics and combustionPattern dynamicsNetwork dynamicsPlasma physics and plasma dynamicsControl signal synchronization and trackingBio-mechanical systems and devicesStructural and multi-body dynamicsFlow or heat-induced vibrationMass and energy transfer dynamicsWave propagation and testing
Download or read book The Dynamics of Two Coupled Van Der Pol Oscillators with Delay Coupling written by Stephen Allen Wirkus and published by . This book was released on 1999 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics And Control Of Hybrid Mechanical Systems written by Gennady A Leonov and published by World Scientific. This book was released on 2010-01-13 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this edited volume aim to provide a better understanding of the dynamics and control of a large class of hybrid dynamical systems that are described by different models in different state space domains. They not only cover important aspects and tools for hybrid systems analysis and control, but also a number of experimental realizations. Special attention is given to synchronization — a universal phenomenon in nonlinear science that gained tremendous significance since its discovery by Huygens in the 17th century. Possible applications of the results introduced in the book include control of mobile robots, control of CD/DVD players, flexible manufacturing lines, and complex networks of interacting agents.The book is based on the material presented at a similarly entitled minisymposium at the 6th European Nonlinear Dynamics Conference held in St Petersburg in 2008. It is unique in that it contains results of several international and interdisciplinary collaborations in the field, and reflects state-of-the-art technological development in the area of hybrid mechanical systems at the forefront of the 21st century.
Download or read book Vibration with Control written by Daniel J. Inman and published by John Wiley & Sons. This book was released on 2006-11-02 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers are becoming increasingly aware of the problems caused by vibration in engineering design, particularly in the areas of structural health monitoring and smart structures. Vibration is a constant problem as it can impair performance and lead to fatigue, damage and the failure of a structure. Control of vibration is a key factor in preventing such detrimental results. This book presents a homogenous treatment of vibration by including those factors from control that are relevant to modern vibration analysis, design and measurement. Vibration and control are established on a firm mathematical basis and the disciplines of vibration, control, linear algebra, matrix computations, and applied functional analysis are connected. Key Features: Assimilates the discipline of contemporary structural vibration with active control Introduces the use of Matlab into the solution of vibration and vibration control problems Provides a unique blend of practical and theoretical developments Contains examples and problems along with a solutions manual and power point presentations Vibration with Control is an essential text for practitioners, researchers, and graduate students as it can be used as a reference text for its complex chapters and topics, or in a tutorial setting for those improving their knowledge of vibration and learning about control for the first time. Whether or not you are familiar with vibration and control, this book is an excellent introduction to this emerging and increasingly important engineering discipline.
Download or read book Vibration Control for Building Structures written by Aiqun Li and published by Springer Nature. This book was released on 2020-03-11 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive introduction to the field of structural vibration reduction control, but may also be used as a reference source for more advanced topics. The content is divided into four main parts: the basic principles of structural vibration reduction control, structural vibration reduction devices, structural vibration reduction design methods, and structural vibration reduction engineering practices. As the book strikes a balance between theoretical and practical aspects, it will appeal to researchers and practicing engineers alike, as well as graduate students.
