Download or read book Analytical Methods in Rotor Dynamics written by Andrew D. Dimarogonas and published by Springer. This book was released on 2013-03-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and construction of rotating machinery operating at supercritical speeds was, in the 1920s, an event of revolutionary importance for the then new branch of dynamics known as rotor dynamics. In the 1960s, another revolution occurred: In less than a decade, imposed by operational and economic needs, an increase in the power of turbomachinery by one order of magnitude took place. Dynamic analysis of complex rotor forms became a necessity, while the importance of approximate methods for dynamic analysis was stressed. Finally, the emergence of fracture mechanics, as a new branch of applied mechanics, provided analytical tools to investigate crack influence on the dynamic behavior of rotors. The scope of this book is based on all these developments. No topics related to the well-known classical problems are included, rather the book deals exclusively with modern high-power turbomachinery.
Download or read book Linear and Nonlinear Rotordynamics written by Yukio Ishida and published by John Wiley & Sons. This book was released on 2013-03-05 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide-ranging treatment of fundamental rotordynamics in order to serve engineers with the necessary knowledge to eliminate various vibration problems. New to this edition are three chapters on highly significant topics: Vibration Suppression - The chapter presents various methods and is a helpful guidance for professional engineers. Magnetic Bearings - The chapter provides fundamental knowledge and enables the reader to realize simple magnetic bearings in the laboratory. Some Practical Rotor Systems - The chapter explains various vibration characteristics of steam turbines and wind turbines. The contents of other chapters on Balancing, Vibrations due to Mechanical Elements, and Cracked Rotors are added to and revised extensively. The authors provide a classification of rotating shaft systems and general coverage of key ideas common to all branches of rotordynamics. They offers a unique analysis of dynamical problems, such as nonlinear rotordynamics, self-excited vibration, nonstationary vibration, and flow-induced oscillations. Nonlinear resonances are discussed in detail, as well as methods for shaft stability and various theoretical derivations and computational methods for analyzing rotors to determine and correct vibrations. This edition also includes case studies and problems.
Download or read book Rotordynamics of Turbomachinery written by John M. Vance and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the rotordynamic considerations that are important to the successful design or troubleshooting of a turbomachine. Shows how bearing design, fluid seals, and rotor geometry affect rotordynamic behavior (vibration, shaft whirling, bearing loads, and critical speeds), and describes two successful computational methods for rotordynamic analysis in terms that can be understood by practicing engineers. Gives descriptive accounts of the state of the art in several areas of the field and presents important mathematical or computational concepts, describing equations and formulas in physical terms for better understanding. Also offers tips for troubleshooting unstable machines and provides practical interpretations of vibration measurements.
Download or read book Turbomachinery Rotordynamics written by Dara Childs and published by John Wiley & Sons. This book was released on 1993-04-16 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Imparts the theory and analysis regarding the dynamics of rotating machinery in order to design such rotating devices as turbines, jet engines, pumps and power-transmission shafts. Takes into account the forces acting upon machine structures, bearings and related components. Provides numerical techniques for analyzing and understanding rotor systems with examples of actual designs. Features an excellent treatment of numerical methods available to obtain computer solutions for authentic design problems.
Download or read book Nonlinear rotordynamics analysis written by William B. Day and published by . This book was released on 1985 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 10th International Conference on Rotor Dynamics IFToMM written by Katia Lucchesi Cavalca and published by Springer. This book was released on 2018-08-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: IFToMM conferences have a history of success due to the various advances achieved in the field of rotor dynamics over the past three decades. These meetings have since become a leading global event, bringing together specialists from industry and academia to promote the exchange of knowledge, ideas, and information on the latest developments in the dynamics of rotating machinery. The scope of the conference is broad, including e.g. active components and vibration control, balancing, bearings, condition monitoring, dynamic analysis and stability, wind turbines and generators, electromechanical interactions in rotor dynamics and turbochargers. The proceedings are divided into four volumes. This second volume covers the following main topics: condition monitoring, fault diagnostics and prognostics; modal testing and identification; parametric and self-excitation in rotor dynamics; uncertainties, reliability and life predictions of rotating machinery; and torsional vibrations and geared systems dynamics.
Download or read book Rotordynamics 2 written by Neville F. Rieger and published by Springer. This book was released on 1988-12-14 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration Analysis of Rotors written by Chong-Won Lee and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is intended for use as an advanced course in either rotordynamics or vibration at the graduate level. This text has mostly grown out of the research work in my laboratory and the lectures given to graduate students in the Mechanical Engineering Department, KAIST. The text contains a variety of topics not normally found in rotordynamics or vibration textbooks. The text emphasizes the analytical aspects and is thus quite different from conventional rotordynamics texts; potential readers are expected to have a firm background in elementary rotordynamics and vibration. In most previously published rotordynamics texts, the behavior of simple rotors has been of a primary concern, while more realistic, multi-degree-f-freedom or continuous systems are seldom treated in a rigorous way, mostly due to the difficulty of a mathematical treatment of such complicated systems. When one wanted to gain a deep insight into dynamic phenomena of complicated rotor systems, one has, in the past, either had to rely on computational techniques, such as the transfer matrix and finite element methods, or cautiously to extend ideas learned from simple rotors whose analytical solutions are readily available. The former methods are limited in the interpretation of results, since the calculations relate only to the simulated case, not to more general system behavior. Ideas learned from simple rotors can, fortunately, often be extended to many practical rotor systems, but there is of course no guarantee of their validity.
Download or read book Rotordynamics of Automotive Turbochargers written by Hung Nguyen-Schäfer and published by Springer. This book was released on 2015-05-15 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotordynamics of automotive turbochargers is dealt with in this book encompassing the widely working field of small turbomachines under real operating conditions at the very high rotor speeds up to 300000 rpm. The broadly interdisciplinary field of turbocharger rotordynamics involves 1) Thermodynamics and Turbo-Matching of Turbochargers 2) Dynamics of Turbomachinery 3) Stability Analysis of Linear Rotordynamics with the Eigenvalue Theory 4) Stability Analysis of Nonlinear Rotordynamics with the Bifurcation Theory 5) Bearing Dynamics of the Oil Film using the Two-Phase Reynolds Equation 6) Computation of Nonlinear Responses of a Turbocharger Rotor 7) Aero and Vibroacoustics of Turbochargers 8) Shop and Trim Balancing at Two Planes of the Rotor 9) Tribology of the Bearing Surface Roughness 10) Design of Turbocharger Platforms using the Similarity Laws The rotor response of an automotive turbocharger at high rotor speeds is studied analytically, computationally, and experimentally. Due to the nonlinear characteristics of the oil-film bearings, some nonlinear responses of the rotor besides the harmonic response 1X, such as oil whirl, oil whip, and modulated frequencies occur in Waterfall diagram. Additionally, the influences of the surface roughness and oil characteristics on the rotor behavior, friction, and wear are discussed. This book is written by an industrial R&D expert with many years of experience in the automotive and turbocharger industries. The all-in-one book of turbochargers is intended for scientific and engineering researchers, practitioners working in the rotordynamics field of automotive turbochargers, and graduate students in applied physics and mechanical engineering.
Download or read book Rotordynamics written by Agnieszka Muszynska and published by CRC Press. This book was released on 2005-05-20 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the most important parts of rotating machinery, rotors are also the most prone to mechanical vibrations, which may lead to machine failure. Correction is only possible when proper and accurate diagnosis is obtained through understanding of rotor operation and all of the potential malfunctions that may occur. Mathematical modeling, in particular
Download or read book Handbook of Rotordynamics written by Fredric F. Ehrich and published by . This book was released on 1999 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This iteration adds some 50 tables and figures, reflecting new devices and phenomena since the 1992 edition, particularly in the design of rotating machinery. Four chapters cover vibration considerations in design; analytic prediction of rotordynamic response; and balancing of flexible.
Download or read book Rotor Dynamics written by J. S. Rao and published by New Age International. This book was released on 1996 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Third Revised And Enlarged Edition Of The Book Presents An In-Depth Study Of The Dynamic Behaviour Of Rotating And Reciprocating Machinery. It Evolved Out Of Lectures Delivered At Different Universities Over The Last Two Decades. The Book Deals With Torsional And Bending Vibrations Of Rotors, Stability Aspects, Balancing And Condition Monitoring. Closed Form Solutions Are Given Wherever Possible And Parametric Studies Presented To Give A Clear Understanding Of The Subject. Transfer Matrix Methods Is Extensively Used For General Class Of Rotors For Both Bending And Torsional Vibrations.Special Attentions Are Given To Transient Analysis Of The Rotors Which Is Becoming An Essential Part Of The Design Of High Speed Machinery. Systems With Fluid Film Bearings, Cracked Rotors And Two Spool Rotors Are Also Presented.A First Course On Theory Of Vibration Is A Prerequisite To This Study. Analysis Used Is Fairly Simple, But Sufficiently Advanced To The Requisite Level Of Predicting Practical Observations. As Far As Possible, Practical Examples Are Illustrated, So That The Book Is Also Useful To Practising Engineers.A Special Feature Of This Book Is Diagnostics Of Rotating Machinery Using Vibration Signature Analysis And Application Of Expert Systems To A Field Engineer In Trouble Shooting Work.
Download or read book Rotor Systems written by Rajiv Tiwari and published by CRC Press. This book was released on 2017-11-22 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to give a basic understanding of rotor dynamics phenomena with the help of simple rotor models and subsequently, the modern analysis methods for real life rotor systems. This background will be helpful in the identification of rotor-bearing system parameters and its use in futuristic model-based condition monitoring and, fault diagnostics and prognostics. The book starts with introductory material for finite element methods and moves to linear and non-linear vibrations, continuous systems, vibration measurement techniques, signal processing and error analysis, general identification techniques in engineering systems, and MATLAB analysis of simple rotors. Key Features: • Covers both transfer matrix methods (TMM) and finite element methods (FEM) • Discusses transverse and torsional vibrations • Includes worked examples with simplicity of mathematical background and a modern numerical method approach • Explores the concepts of instability analysis and dynamic balancing • Provides a basic understanding of rotor dynamics phenomena with the help of simple rotor models including modern analysis methods for real life rotor systems.
Download or read book Rotordynamics of Automotive Turbochargers written by Hung Nguyen-Schäfer and published by Springer Science & Business Media. This book was released on 2012-03-06 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with rotordynamics of automotive turbochargers while encompassing the analysis of the dynamics of rotating machines at very high rotor speeds of 300,000 rpm and above. This interdisciplinary field involves 1. thermodynamics and turbo-matching knowledge to compute working conditions of turbochargers, 2. fluid and bearing dynamics to calculate various operating thrust loads and to design the rotating floating ring bearings (two-oil-film bearings), and 3. tribology to improve the rotor stability and to reduce the bearing friction. Mathematical background in modeling and simulation methods is necessary; however, the prerequisites have been kept to a minimum. The book addresses both practitioners working in the field of rotordynamics of automotive turbochargers and graduate students in mechanical engineering.
Download or read book Dynamics and Fault Diagnosis of Nonlinear Rotors and Impellers written by Jiazhong Zhang and published by Springer Nature. This book was released on 2022-04-28 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume presents recent developments in nonlinear dynamics applied to engineering. Specifically, the authors address stability and bifurcation in large-scale, complex rotor dynamic systems; periodic motions and their bifurcations in nonlinear circuit systems, fault diagnosis of complex engineering systems with nonlinear approaches, singularities in fluid-machinery and bifurcation analysis, nonlinear behaviors in rotor dynamic system with multi-mistuned blades, mode localization induced by mistuning in impellers with periodical and cyclic symmetry, and nonlinear behaviors in fluid-structure interaction and their control. These new results will maximize reader understand on the recent progress in nonlinear dynamics applied to large-scale, engineering systems in general and nonlinear rotors and impellers in particular.
Download or read book Proceedings of the 10th International Conference on Rotor Dynamics IFToMM written by Katia Lucchesi Cavalca and published by Springer. This book was released on 2018-08-18 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: IFToMM conferences have a history of success due to the various advances achieved in the field of rotor dynamics over the past three decades. These meetings have since become a leading global event, bringing together specialists from industry and academia to promote the exchange of knowledge, ideas, and information on the latest developments in the dynamics of rotating machinery. The scope of the conference is broad, including e.g. active components and vibration control, balancing, bearings, condition monitoring, dynamic analysis and stability, wind turbines and generators, electromechanical interactions in rotor dynamics and turbochargers. The proceedings are divided into four volumes. This third volume covers the following main topics: dynamic analysis and stability; electromechanical interactions in rotordynamics; nonlinear phenomena in rotordynamics; rotordynamics of micro, nano and cryogenic machines; and fluid structure interactions in rotordynamics.
Download or read book Nonlinear Finite Element Based Multi body Analysis for Rotor Dynamics written by Minsup Lee and published by . This book was released on 1995 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
