Download or read book Nonlinear Robust Control of Electro hydraulic Systems written by Jan Komsta and published by . This book was released on 2013 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Control Techniques for Electro Hydraulic Actuators in Robotics Engineering written by Qing Guo and published by CRC Press. This book was released on 2017-08-14 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Control Techniques for Electro-Hydraulic Actuators in Robotics Engineering meets the needs of those working in advanced electro-hydraulic controls for modern mechatronic and robotic systems. The non-linear EHS control methods covered are proving to be more effective than traditional controllers, such as PIDs. The control strategies given address parametric uncertainty, unknown external load disturbance, single-rod actuator characteristics, and control saturation. Theoretical and experimental validations are explained, and examples provided. Based on the authors' cutting-edge research, this work is an important resource for engineers, researchers, and students working in EHS.
Download or read book Advances and Applications in Nonlinear Control Systems written by Sundarapandian Vaidyanathan and published by Springer. This book was released on 2016-03-17 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reports on the latest advances and applications of nonlinear control systems. It consists of 30 contributed chapters by subject experts who are specialized in the various topics addressed in this book. The special chapters have been brought out in the broad areas of nonlinear control systems such as robotics, nonlinear circuits, power systems, memristors, underwater vehicles, chemical processes, observer design, output regulation, backstepping control, sliding mode control, time-delayed control, variables structure control, robust adaptive control, fuzzy logic control, chaos, hyperchaos, jerk systems, hyperjerk systems, chaos control, chaos synchronization, etc. Special importance was given to chapters offering practical solutions, modeling and novel control methods for the recent research problems in nonlinear control systems. This book will serve as a reference book for graduate students and researchers with a basic knowledge of electrical and control systems engineering. The resulting design procedures on the nonlinear control systems are emphasized using MATLAB software.
Download or read book Proceedings of 2024 Chinese Intelligent Systems Conference written by Yingmin Jia and published by Springer Nature. This book was released on with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robust Nonlinear Control Design written by Randy A. Freeman and published by Springer Science & Business Media. This book was released on 2009-05-21 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This softcover book summarizes Lyapunov design techniques for nonlinear systems and raises important issues concerning large-signal robustness and performance. The authors have been the first to address some of these issues, and they report their findings in this text. The researcher who wishes to enter the field of robust nonlinear control could use this book as a source of new research topics. For those already active in the field, the book may serve as a reference to a recent body of significant work. Finally, the design engineer faced with a nonlinear control problem will benefit from the techniques presented here.
Download or read book Proceedings of 2017 Chinese Intelligent Systems Conference written by Yingmin Jia and published by Springer. This book was released on 2017-09-27 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected research papers from CISC’17, held in MudanJiang, China. The topics covered include Multi-agent system, Evolutionary Computation, Artificial Intelligence, Complex systems, Computation intelligence and soft computing, Intelligent control, Advanced control technology, Robotics and applications, Intelligent information processing, Iterative learning control, Machine Learning, and etc. Engineers and researchers from academia, industry, and government can gain valuable insights into solutions combining ideas from multiple disciplines in the field of intelligent systems.
Download or read book Electrohydraulic Servo Systems written by D. R. Raghavendra and published by Springer Nature. This book was released on 2023-05-05 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamental concepts of electrohydraulic (EH) servo systems in detail and also presents the developments about power, quadratic response, and control flexibility of EH servo systems with applications in aircraft/aerospace engineering, mobile equipment, material/structure testing, motion simulators, and strategic defense sectors. Various topics covered in this books are systems and configurations of servo systems, components, applications, design of SISO and MIMO and control options of SISO and MIMO systems. It further includes a chapter on contamination control, fault detection and diagnosis (FDD) of these systems. The detailed working procedures and advice on implementation routines presented in this book will help readers to apply the control models and systems presented so as to make their own servo systems more efficient. The book will be useful for mechanical engineers and professionals involved in the analysis and design of electrohydraulic control systems, especially in advanced hydraulic industries, the aeronautical and space, and automotive industries. It would also be a useful reference for advanced courses in EH systems.
Download or read book Manufacturing and Industrial Engineering written by Pankaj Agarwal and published by CRC Press. This book was released on 2021-07-19 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in manufacturing and industrial engineering in terms of advanced and latest technologies are required nowadays to attend the accelerated demands of high quality, productivity, and sustainability simultaneously. This book fulfils the requirement by offering unique comprehensive chapters on advances in manufacturing and industrial engineering technologies with an emphasis on Industry 4.0. This book sheds light on advances in the field of manufacturing and industrial engineering for enhancement in productivity, quality, and sustainability. It comprehensively covers the recent developments, latest trends, research, and innovations being carried out. 3D printing, green manufacturing, computer integrated manufacturing, cloud manufacturing, intelligent condition monitoring, advanced forming, automation, supply chain optimization, and advanced manufacturing of composites are covered in this book. Industry 4.0 based technologies for mechanical and industrial engineering are also presented with both a theoretical and a practical focus. This book is written for students, researchers, professors, and engineers working in the fields of manufacturing, industrial, materials science, and mechanical engineering.
Download or read book Challenges and Paradigms in Applied Robust Control written by Andrzej Bartoszewicz and published by BoD – Books on Demand. This book was released on 2011-11-16 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this book is to present important challenges and paradigms in the field of applied robust control design and implementation. Book contains a broad range of well worked out, recent application studies which include but are not limited to H-infinity, sliding mode, robust PID and fault tolerant based control systems. The contributions enrich the current state of the art, and encourage new applications of robust control techniques in various engineering and non-engineering systems.
Download or read book Nonlinear Control Systems Design 1995 written by A.J. Krener and published by Elsevier. This book was released on 2016-01-22 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series of IFAC Symposia on Nonlinear Control Systems provides the ideal forum for leading researchers and practitioners who work in the field to discuss and evaluate the latest research and developments. This publication contains the papers presented at the 3rd IFAC Symposium in the series which was held in Tahoe City, California, USA.
Download or read book Adaptive Robust Control with Limited Knowledge on Systems Dynamics written by Spandan Roy and published by Springer Nature. This book was released on 2019-10-08 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book investigates the role of artificial input delay in approximating unknown system dynamics, referred to as time-delayed control (TDC), and provides novel solutions to current design issues in TDC. Its central focus is on designing adaptive-switching gain-based robust control (ARC) for a class of Euler–Lagrange (EL) systems with minimal or no knowledge of the system dynamics parameters. The newly proposed TDC-based ARC tackles the commonly observed over- and under-estimation issues in switching gain. The consideration of EL systems lends a practical perspective on the proposed methods, and each chapter is supplemented by relevant experimental data. The book offers a unique resource for researchers in the areas of ARC and TDC alike, and covers the state of the art, new algorithms, and future directions.
Download or read book Advances in Engineering Research and Application written by Kai-Uwe Sattler and published by Springer Nature. This book was released on 2019-11-30 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume gathers the outcomes of the International Conference on Engineering Research and Applications (ICERA 2019), which was held at Thai Nguyen University of Technology, Vietnam, on December 1–2, 2019 and provided an international forum for disseminating the latest theories and practices in engineering research and applications. The conference focused on original research work in a broad range of areas, including Mechanical Engineering, Materials and Mechanics of Materials, Mechatronics and Micromechatronics, Automotive Engineering, Electrical and Electronics Engineering, and Information and Communication Technology. By sharing the latest advances in these fields, the book will help academics and professionals alike to revisit their thinking on sustainable development.
Download or read book Soft Computing for Intelligent Systems written by Nikhil Marriwala and published by Springer Nature. This book was released on 2021-06-22 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents high-quality research papers presented at the International Conference on Soft Computing for Intelligent Systems (SCIS 2020), held during 18–20 December 2020 at University Institute of Engineering and Technology, Kurukshetra University, Kurukshetra, Haryana, India. The book encompasses all branches of artificial intelligence, computational sciences and machine learning which is based on computation at some level such as AI-based Internet of things, sensor networks, robotics, intelligent diabetic retinopathy, intelligent cancer genes analysis using computer vision, evolutionary algorithms, fuzzy systems, medical automatic identification intelligence system and applications in agriculture, health care, smart grid and instrumentation systems. The book is helpful for educators, researchers and developers working in the area of recent advances and upcoming technologies utilizing computational sciences in signal processing, imaging, computing, instrumentation, artificial intelligence and their applications.
Download or read book Proceedings of the 4th International Conference on Electrical Engineering and Control Applications written by Sofiane Bououden and published by Springer Nature. This book was released on 2020-09-29 with total page 1257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented during the 4th International Conference on Electrical Engineering and Control Applications. It covers new control system models, troubleshooting tips and complex system requirements, such as increased speed, precision and remote capabilities. Additionally, the papers discuss not only the engineering aspects of signal processing and various practical issues in the broad field of information transmission, but also novel technologies for communication networks and modern antenna design. This book is intended for researchers, engineers and advanced postgraduate students in the fields of control and electrical engineering, computer science and signal processing, as well as mechanical and chemical engineering.
Download or read book Advances in Mechanism Machine Science and Engineering in China written by Xinjun Liu and published by Springer Nature. This book was released on 2023-05-31 with total page 2228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the conference proceedings of the 23rd IFToMM China International Conference on Mechanism and Machine Science & Engineering (IFToMM CCMMS 2022). CCMMS was initiated in 1982, and it is the most important forum held in China for the exchange of research ideas, presentation of technical and scientific achievements, and discussion of future directions in the field of mechanism and machine science. The topics include parallel/hybrid mechanism synthesis and analysis, theoretical & computational kinematics, compliant mechanisms and micro/nano-mechanisms, reconfigurable and metamorphic mechanisms, space structures, mechanisms and materials, structure adaptation in space environment and ground testing, large-scale membrane deployable structures, construction and application of super-scale space systems, cams, gears and combining mechanisms, fluid power mechatronics drivetrain, mechanical design theory and methods, dynamics and vibration control, mechatronics, biologically inspired mechanisms and robotics, medical & rehabilitation robotics, mobile robotics, soft robotics, heavy non-road mobile machine, robot applications, engineering education on mechanisms, machines, and robotics. This book provides a state-of-the-art overview of current advances in mechanism and machine science in China. The inspiring ideas presented in the papers enlighten academic research and industrial application. The potential readers include academic researchers and industrial professionals in mechanism and machine science.
Download or read book Modeling Design and Simulation of Systems written by Mohamed Sultan Mohamed Ali and published by Springer. This book was released on 2017-08-24 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set CCIS 751 and CCIS 752 constitutes the proceedings of the 17th Asia Simulation Conference, AsiaSim 2017, held in Malacca, Malaysia, in August/September 2017. The 124 revised full papers presented in this two-volume set were carefully reviewed and selected from 267 submissions. The papers contained in these proceedings address challenging issues in modeling and simulation in various fields such as embedded systems; symbiotic simulation; agent-based simulation; parallel and distributed simulation; high performance computing; biomedical engineering; big data; energy, society and economics; medical processes; simulation language and software; visualization; virtual reality; modeling and Simulation for IoT; machine learning; as well as the fundamentals and applications of computing.
Download or read book Robust Adaptive Control written by Petros Ioannou and published by Courier Corporation. This book was released on 2013-09-26 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented in a tutorial style, this comprehensive treatment unifies, simplifies, and explains most of the techniques for designing and analyzing adaptive control systems. Numerous examples clarify procedures and methods. 1995 edition.
