Download or read book Nonlinear Phenomena in Flows of Viscoelastic Polymer Fluids written by A.I. Leonov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents theoretical and experimental studies of flows of elastic liquids. Falling into this category are particularly the melts and concentrated solutions of such flexible-chain polymers as polyethylene, polyisobutylene and polypropylene, all of which are widely used in polymer processing. These polydisperse polymers vary greatly, from batch to batch, in their mechanical properties and 20% variation in a property is believed to be good enough. l 7 All recent books - devoted to the rheology of polymers do not answer the question of which constitutive equations should be used for solving the fluid mechanic problems of polymer processing in the usual case of an appreciable nonlinear region of deformation where nonlinear effects of shear and extensional elasticity are very important. Viscoelastic constitut ive equations cited commonly (see, e.g. Refs 5 and 6) do not describe simultaneously even the simplest cases of deformations, viz. simple shear and uniaxial extension. Moreover, some of them are internally inconsist ent and sometimes display highly unstable behaviour in simple flows without any fundamental reasons. Even more respected molecular ap free from these defects.
Download or read book Nonlinear Phenomena in Flows of Viscoelastic Polymer Fluids written by A I Leonov and published by . This book was released on 1994-04-30 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Phenomena in Flows of Viscoelastic Polymer Fluids written by A.I. Leonov and published by Springer. This book was released on 1994-04-30 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents theoretical and experimental studies of flows of elastic liquids. Falling into this category are particularly the melts and concentrated solutions of such flexible-chain polymers as polyethylene, polyisobutylene and polypropylene, all of which are widely used in polymer processing. These polydisperse polymers vary greatly, from batch to batch, in their mechanical properties and 20% variation in a property is believed to be good enough. l 7 All recent books - devoted to the rheology of polymers do not answer the question of which constitutive equations should be used for solving the fluid mechanic problems of polymer processing in the usual case of an appreciable nonlinear region of deformation where nonlinear effects of shear and extensional elasticity are very important. Viscoelastic constitut ive equations cited commonly (see, e.g. Refs 5 and 6) do not describe simultaneously even the simplest cases of deformations, viz. simple shear and uniaxial extension. Moreover, some of them are internally inconsist ent and sometimes display highly unstable behaviour in simple flows without any fundamental reasons. Even more respected molecular ap free from these defects.
Download or read book Polymer Processing Instabilities written by Savvas G. Hatzikiriakos and published by CRC Press. This book was released on 2004-11-30 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Processing Instabilities: Control and Understanding offers a practical understanding of the various flows that occur during the processing of polymer melts. The book pays particular attention to flow instabilities that affect the rate of production and the methods used to prevent and eliminate flow instabilities in order to increase product
Download or read book Modeling and Simulation in Polymers written by Purushottam D. Gujrati and published by John Wiley & Sons. This book was released on 2010-03-30 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling a gap in the literature and all set to become the standard in this field, this monograph begins with a look at computational viscoelastic fluid mechanics and studies of turbulent flows of dilute polymer solutions. It then goes on discuss simulations of nanocomposites, polymerization kinetics, computational approaches for polymers and modeling polyelectrolytes. Further sections deal with tire optimization, irreversible phenomena in polymers, the hydrodynamics of artificial and bacterial flagella as well as modeling and simulation in liquid crystals. The result is invaluable reading for polymer and theoretical chemists, chemists in industry, materials scientists and plastics technologists.
Download or read book Advances in Polymer Processing written by S Thomas and published by Elsevier. This book was released on 2009-05-30 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: Processing techniques are critical to the performance of polymer products which are used in a wide range of industries. Advances in polymer processing: From macro- to nano- scales reviews the latest advances in polymer processing, techniques and materials. Part one reviews the fundamentals of polymer processing with chapters on rheology, materials and polymer extrusion. Part two then discusses advances in moulding technology with chapters on such topics as compression, rotational and blow moulding of polymers. Chapters in Part three review alternative processing technologies such as calendaring and coating, foam processing and radiation processing of polymers. Part four discusses micro and nano-technologies with coverage of themes such as processing of macro, micro and nanocomposites and processing of carbon nanotubes. The final section of the book addresses post-processing technologies with chapters on online monitoring and computer modelling as well as joining, machining, finishing and decorating of polymers. With is distinguished editors and team of international contributors, Advances in polymer processing: From macro- to nano- scales is an invaluable reference for engineers and academics concerned with polymer processing. Reviews the latest advances in polymer processing, techniques and materials analysing new challenges and opportunities Discusses the fundamentals of polymer processing considering the compounding and mixing of polymers as well as extrusion Assesses alternative processing technologies including calendaring and coating and thermoforming of polymers
Download or read book Viscoelasticity and Rheology written by Arthur S. Lodge and published by Academic Press. This book was released on 2014-06-28 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Viscoelasticity and Rheology covers the proceedings of a symposium by the same title, conducted by the Mathematics Research Center held at the University of Wisconsin-Madison on October 16-18, 1984. The contributions to the symposium are divided into four broad categories, namely, experimental results, constitutive theories, mathematical analysis, and computation. This 16-chapter work begins with experimental topics, including the motion of bubbles in viscoelastic fluids, wave propagation in viscoelastic solids, flows through contractions, and cold-drawing of polymers. The next chapters covering constitutive theories explore the molecular theories for polymer solutions and melts based on statistical mechanics, the use and limitations of approximate constitutive theories, a comparison of constitutive laws based on various molecular theories, network theories and some of their advantages in relation to experiments, and models for viscoplasticity. These topics are followed by discussions of the existence, regularity, and development of singularities, change of type, interface problems in viscoelasticity, existence for initial value problems and steady flows, and propagation and development of singularities. The remaining chapters deal with the numerical simulation of flow between eccentric cylinders, flow around spheres and bubbles, the hole pressure problem, and a review of computational problems related to various constitutive laws. This book will prove useful to chemical engineers, researchers, and students.
Download or read book Lubricant Additives written by Leslie R. Rudnick and published by CRC Press. This book was released on 2017-07-12 with total page 1432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This indispensable book describes lubricant additives, their synthesis, chemistry, and mode of action. All important areas of application are covered, detailing which lubricants are needed for a particular application. Laboratory and field performance data for each application is provided and the design of cost-effective, environmentally friendly technologies is fully explored. This edition includes new chapters on chlorohydrocarbons, foaming chemistry and physics, antifoams for nonaqueous lubricants, hydrogenated styrene–diene viscosity modifiers, alkylated aromatics, and the impact of REACh and GHS on the lubricant industry.
Download or read book Polymer Melt Fracture written by Rudy Koopmans and published by CRC Press. This book was released on 2010-08-03 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continually growing plastics market consists of more than 250 million tons of product annually, making the recurring problem of polymer melt fracture an acute issue in the extrusion of these materials. Presenting a pictorial library of the different forms of melt fracture and real industrial extrusion melt fracture phenomena, Polymer Melt Fract
Download or read book Amorphous Polymers and Non Newtonian Fluids written by Constantine Dafermos and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IMA Volume in Mathematics and its Applications AMORPHOUS POLYMERS AND NON-NEWTONIAN FLUIDS is in part the proceedings of a workshop which was an integral part of the 1984-85 IMA program on CONTINUUM PHYSICS AND PARTIAL DIFFERENTIAL EQUATIONS We are grateful to the Scientific Committee: Haim Brezis Constantine Dafermos Jerry Ericksen David Kinderlehrer for planning and implementing an exciting and stimulating year-long program. We espe cially thank the Program Organizers, Jerry Ericksen, David Kinderlehrer, Stephen Prager and Matthew Tirrell for organizing a workshop which brought together scientists and mathematicians in a variety of areas for a fruitful exchange of ideas. George R. Sell Hans Weinberger Preface Experiences with amorphous polymers have supplied much of the motivation for developing novel kinds of molecular theory, to try to deal with the more significant features of systems involving very large molecules with many degrees offreedom. Similarly, the observations of many unusual macroscopic phenomena has stimulated efforts to develop linear and nonlinear theories of viscoelasticity to describe them. In either event, we are confronted not with a well-established, specific set of equations, but with a variety of equations, conforming to a loose pattern and suggested by general kinds of reasoning. One challenge is to devise techniques for finding equations capable of delivering definite and reliable predictions. Related to this is the issue of discovering ways to better grasp the nature of solutions ofthose equations showing some promise.
Download or read book Nonlinear Polymer Rheology written by Shi-Qing Wang and published by John Wiley & Sons. This book was released on 2018-01-02 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating latest research results and characterization techniques, this book helps readers understand and apply fundamental principles in nonlinear polymer rheology. The author connects the basic theoretical framework with practical polymer processing, which aids practicing scientists and engineers to go beyond the existing knowledge and explore new applications. Although it is not written as a textbook, the content can be used in an upper undergraduate and first year graduate course on polymer rheology. • Describes the emerging phenomena and associated conceptual understanding in the field of nonlinear polymer rheology • Incorporates details on latest experimental discoveries and provides new methodology for research in polymer rheology • Integrates latest research results and new characterization techniques like particle tracking velocimetric method • Focuses on the issues concerning the conceptual and phenomenological foundations for polymer rheology • Has a companion website for readers to access with videos complementing the content within several chapters
Download or read book Mathematical Analysis of Viscoelastic Flows written by Michael Renardy and published by SIAM. This book was released on 2000-01-01 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph is based on a series of lectures presented at the 1999 NSF-CBMS Regional Research Conference on Mathematical Analysis of Viscoelastic Flows. It begins with an introduction to phenomena observed in viscoelastic flows, the formulation of mathematical equations to model such flows, and the behavior of various models in simple flows. It also discusses the asymptotics of the high Weissenberg limit, the analysis of flow instabilities, the equations of viscoelastic flows, jets and filaments and their breakup, as well as several other topics.
Download or read book Constitutive Analysis of the Nonlinear Viscoelasticity of Polymer Fluids in Various Types of Flow written by Paul Jean Rene Leblans and published by . This book was released on 1986 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transfer Phenomena in Fluid and Heat Flows VIII written by Stanislav Kolisnychenko and published by Trans Tech Publications Ltd. This book was released on 2019-04-08 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of the journal Defect and Diffusion Forum presents to readers the next 8th special issue from the series Transfer Phenomena in Fluid and Heat Flows which contains articles covering theoretical and practical aspects of modeling and numerical investigation of the diffusive convection and magnetohydromagnetic mixed convective flows, heat transfer phenomena in different media and engineering objects, solving other engineering problems related to heat and mass transfer phenomena.
Download or read book Developments and Applications of Non Newtonian Flows 1995 written by Dennis A. Siginer and published by . This book was released on 1995 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transport Phenomena written by R. Byron Bird and published by John Wiley & Sons. This book was released on 2006-12-11 with total page 935 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport Phenomena has been revised to include deeper and more extensive coverage of heat transfer, enlarged discussion of dimensional analysis, a new chapter on flow of polymers, systematic discussions of convective momentum,and energy. Topics also include mass transport, momentum transport and energy transport, which are presented at three different scales: molecular, microscopic and macroscopic. If this is your first look at Transport Phenomena you'll quickly learn that its balanced introduction to the subject of transport phenomena is the foundation of its long-standing success.
Download or read book Rheology written by Alexander Y. Malkin and published by Elsevier. This book was released on 2022-03-21 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rheology: Concepts, Methods, and Applications, Fourth Edition provides a thorough historical and theoretical grounding in the field and introduces rheology as the method for solving many practical problems in materials science and engineering. This new edition has been updated to include new evidence-based methods and applications, coverage of non-Newtonian properties and their effect on material processing, heterogeneity in flow, rheology of highly concentrated emulsions and suspensions, viscosity and viscoelastic behavior of nanocomposites, the behavior of supramolecular solutions, rheology of gels, deformation-induced anisotropy, conformation changes during flow and molecular orientation. The book is practical and relevant for industry, but also consistent with rheology courses in academia, making it relevant to both academics and accomplished rheologists in industry. Includes updates on non-Newtonian properties and their effect on material processing, heterogeneity in flow, rheology of concentrated emulsions, suspensions, and more Discusses viscosity and viscoelastic behavior of nanocomposites, the behavior of supramolecular solutions, rheology of gels, deformation-induced anisotropy, conformation changes during flow, and molecular orientation Covers theory backed by practical examples, methods of measurement and raw data treatment, and various applications
