Download or read book Nonlinear Numerical Analysis of Reinforced Concrete written by American Society of Mechanical Engineers. Winter Annual Meeting and published by . This book was released on 1982 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Finite Element Analysis of Composite and Reinforced Concrete Beams written by Xiaoshan Lin and published by Woodhead Publishing. This book was released on 2019-10-18 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Finite Element Analysis of Composite and Reinforced Concrete Beams presents advanced methods and techniques for the analysis of composite and FRP reinforced concrete beams. The title introduces detailed numerical modeling methods and the modeling of the structural behavior of composite beams, including critical interfacial bond-slip behavior. It covers a new family of composite beam elements developed by the authors. Other sections cover nonlinear finite element analysis procedures and the numerical modeling techniques used in commercial finite element software that will be of particular interest to engineers and researchers executing numerical simulations. Gives advanced methods and techniques for the analysis of composite and fiber Reinforced Plastic (FRP) and reinforced concrete beams Presents new composite beam elements developed by the authors Introduces numerical techniques for the development of effective finite element models using commercial software Discusses the critical issues encountered in structural analysis Maintains a clear focus on advanced numerical modeling
Download or read book Numerical Analysis of Reinforced Concrete Structures written by Constantin Avram and published by Elsevier Publishing Company. This book was released on 1993 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.
Download or read book Computational Methods for Reinforced Concrete Structures written by Ulrich Häußler-Combe and published by John Wiley & Sons. This book was released on 2014-11-24 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the application of numerical methods to reinforced concrete structures. To analyze reinforced concrete structures linear elastic theories are inadequate because of cracking, bond and the nonlinear and time dependent behavior of both concrete and reinforcement. These effects have to be considered for a realistic assessment of the behavior of reinforced concrete structures with respect to ultimate limit states and serviceability limit states. The book gives a compact review of finite element and other numerical methods. The key to these methods is through a proper description of material behavior. Thus, the book summarizes the essential material properties of concrete and reinforcement and their interaction through bond. These basics are applied to different structural types such as bars, beams, strut and tie models, plates, slabs and shells. This includes prestressing of structures, cracking, nonlinear stressstrain relations, creeping, shrinkage and temperature changes. Appropriate methods are developed for each structural type. Large displacement and dynamic problems are treated as well as short-term quasi-static problems and long-term transient problems like creep and shrinkage. Most problems are illustrated by examples which are solved by the program package ConFem, based on the freely available Python programming language. The ConFem source code together with the problem data is available under open source rules at concrete-fem.com. The author aims to demonstrate the potential and the limitations of numerical methods for simulation of reinforced concrete structures, addressing students, teachers, researchers and designing and checking engineers.
Download or read book Non Linear Mechanics of Reinforced Concrete written by K. Maekawa and published by CRC Press. This book was released on 2003-09-02 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the application of nonlinear static and dynamic analysis for the design, maintenance and seismic strengthening of reinforced concrete structures. The latest structural and RC constitutive modelling techniques are described in detail, with particular attention given to multi-dimensional cracking and damage assessment, and their practical applications for performance-based design. Other subjects covered include 2D/3D analysis techniques, bond and tension stiffness, shear transfer, compression and confinement. It can be used in conjunction with WCOMD and COM3 software Nonlinear Mechanics of Reinforced Concrete presents a practical methodology for structural engineers, graduate students and researchers concerned with the design and maintenance of concrete structures.
Download or read book Finite Element Analysis of Reinforced Concrete Structures 2003 written by Laura N. Lowes and published by . This book was released on 2006 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Design Aids for Nonlinear Analysis of Reinforced Concrete Structures written by Srinivasan Chandrasekaran and published by CRC Press. This book was released on 2016-04-19 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tools to Safeguard New Buildings and Assess Existing OnesNonlinear analysis methods such as static pushover are globally considered a reliable tool for seismic and structural assessment. But the accuracy of seismic capacity estimates-which can prevent catastrophic loss of life and astronomical damage repair costs-depends on the use of the correct b
Download or read book Nonlinear Numerical Analysis of Reinforced Concrete written by American Society of Mechanical Engineers. Winter Annual Meeting and published by . This book was released on 1982 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Structural Concrete written by Ulrich Haussler-Combe and published by John Wiley & Sons. This book was released on 2022-11-21 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete is by far the most used building material due to its advantages: it is shapeable, cost-effective and available everywhere. Combined with reinforcement it provides an immense bandwidth of properties and may be customized for a huge range of purposes. Thus, concrete is the building material of the 20th century. To be the building material of the 21th century its sustainability has to move into focus. Reinforced concrete structures have to be designed expending less material whereby their load carrying potential has to be fully utilized. Computational methods such as Finite Element Method (FEM) provide essential tools to reach the goal. In combination with experimental validation, they enable a deeper understanding of load carrying mechanisms. A more realistic estimation of ultimate and serviceability limit states can be reached compared to traditional approaches. This allows for a significantly improved utilization of construction materials and a broader horizon for innovative structural designs opens up. However, sophisticated computational methods are usually provided as black boxes. Data is fed in, the output is accepted as it is, but an understanding of the steps in between is often rudimentary. This has the risk of misinterpretations, not to say invalid results compared to initial problem definitions. The risk is in particular high for nonlinear problems. As a composite material, reinforced concrete exhibits nonlinear behaviour in its limit states, caused by interaction of concrete and reinforcement via bond and the nonlinear properties of the components. Its cracking is a regular behaviour. The book aims to make the mechanisms of reinforced concrete transparent from the perspective of numerical methods. In this way, black boxes should also become transparent. Appropriate methods are described for beams, plates, slabs and shells regarding quasi-statics and dynamics. Concrete creeping, temperature effects, prestressing, large displacements are treated as examples. State of the art concrete material models are presented. Both the opportunities and the pitfalls of numerical methods are shown. Theory is illustrated by a variety of examples. Most of them are performed with the ConFem software package implemented in Python and available under open-source conditions.
Download or read book Finite Element Analysis of Reinforced Concrete Structures II written by Jeremy Isenberg and published by . This book was released on 1993 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection contains 10 papers discussing finite element analysis of reinforced concrete structures presented at an international workshop held in New York, New York, June 2-5, 1991.
Download or read book Manual of Numerical Methods in Concrete written by M Y H Bangash and published by Thomas Telford. This book was released on 2001-07-27 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manual of numerical methods in concrete aims to present a unified approach for the available mathematical models of concrete, linking them to finite element analysis and to computer programs in which special provisions are made for concrete plasticity, cracking and crushing with and without concrete aggregate interlocking. Creep, temperature, and shrinkage formulations are included and geared to various concrete constitutive models.
Download or read book Nonlinear Seismic Analysis and Design of Reinforced Concrete Buildings written by P. Fajfar and published by CRC Press. This book was released on 1992-03-20 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forty scientists working in 13 different countries detail in this work the most recent advances in seismic design and performance assessment of reinforced concrete buildings. It is a valuable contribution in the mitigation of natural disasters.
Download or read book Structural Concrete written by M. D. Kotsovos and published by Thomas Telford. This book was released on 1995 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows the unifying generality of the proposed approach and the reliability of the ensuing computer package, for which the sole input is the specified cylinder strength of concrete and the yield is the stress of steel. This book offers an understanding of structural concrete behaviour, and illustrates the revision required for improving methods.
Download or read book Nonlinear Finite Element Analysis of Concrete Structures written by Niels Saabye Ottosen and published by . This book was released on 1980 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling and Analysis of Reinforced Concrete Structures for Dynamic Loading written by Christian Meyer and published by Springer. This book was released on 2014-05-04 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the material behavior of concrete under dynamic loads, especially impact and impuls, opens the volume. It is followed by a summary of the various analytical tools available to engineers interested in analyzing the nonlinear behavior of reinforced concrete members for dynamic load. These range from relatively simple and practice-oriented push-over analysis to sophisticated layered finite element models. Important design-related topics are discussed, with special emphasis on performance of concrete frames subjected to seismic loads. The significance of modern software systems is recognized by including extensive examples. For readers not current in dynamic analysis methods, an appendix contains a review of the mathematical methods most commonly used for such analysis.
Download or read book Finite Element Design of Concrete Structures written by Guenter Axel Rombach and published by Thomas Telford. This book was released on 2004 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Finite Element Design of Concrete Structures: practical problems and their solutions the author addresses this blind belief in computer results by offering a useful critique that important details are overlooked due to the flood of information from the output of computer calculations. Indeed, errors in the numerical model may lead in extreme cases to structural failures as the collapse of the so-called Sleipner platform has demonstrated.
Download or read book Seismic Design AIDS for Nonlinear Analysis of Reinforced Concrete Structures written by Srinivasan Chandrasekaran and published by CRC Press. This book was released on 2019-08-30 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear analysis methods such as static pushover or limit analysis until collapse are globally considered reliable tools for seismic and structural assessment. But the accuracy of seismic capacity estimates--which can prevent catastrophic loss of life and astronomical damage repair costs--depends on the use of the correct basic input parameters. Tools to Safeguard New Buildings and Assess Existing Ones Seismic Design Aids for Nonlinear Analysis of Reinforced Concrete Structures simplifies the estimation of base structural parameters and enables accurate evaluation of proper bounds for the safety factor. Many design engineers make the relatively common mistake of using default properties of materials as input to nonlinear analyses without realizing that any minor variation in the nonlinear characteristics of constitutive materials, such as concrete and steel, could result in a solution error that leads to a disastrously incorrect assessment or interpretation. To achieve a more accurate pushover analysis and improve general performance-based design, this book: Reviews relevant literature to help engineers conduct structural seismic assessment Includes design curves, alleviating the need for complex mathematics Offers supplementary online tools to aid in computing any parameter Provides complete computer coding used to obtain building collapse multipliers Reassessing key inputs, this book analyzes boundaries using a detailed mathematical model based on international codes. It proposes design curves and tables derived from the authors' studies, detailing modeling numerical procedures step by step. The authors include analytical bounds of the structural safety factor for some typical frames, making this work a sound and valuable tool for assessment or desi
