Download or read book Model Based Control of Particulate Processes written by Panagiotis D. Christofides and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particulate processes are characterized by the co-presence of a contin uous phase and a dispersed (particulate) phase, and are widely used in industry for the manufacturing of many high-value products. Examples include the crystallization of proteins for pharmaceutical applications, the emulsion polymerization reactors for the production of latex, the aerosol synthesis of titania powder used in the production of white pig ments, and the thermal spray processing of nanostructured coatings. It is now well understood that the physico-chemical and mechanical properties of materials made with particulates depend heavily on the characteristics of the corresponding particle size distribution. This fact, together with recent advances in dynamics of infinite-dimensional sys tems and nonlinear control theory, has motivated extensive research on model-based control of particulate processes using population balances to achieve tight control of particle size distributions. This book - the first of its kind - presents general methods for the synthesis of nonlinear, robust and constrained feedback controllers for broad classes of particulate process models and illustrates their applica tions to industrially-important crystallization, aerosol and thermal spray processes. The controllers use a finite number of measurement sensors and control actuators to achieve stabilization of the closed-loop system, output tracking, attenuation of the effect of model uncertainty and han dling of actuator saturation.

Download or read book The Control Handbook written by William S. Levine and published by CRC Press. This book was released on 2018-10-08 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: At publication, The Control Handbook immediately became the definitive resource that engineers working with modern control systems required. Among its many accolades, that first edition was cited by the AAP as the Best Engineering Handbook of 1996. Now, 15 years later, William Levine has once again compiled the most comprehensive and authoritative resource on control engineering. He has fully reorganized the text to reflect the technical advances achieved since the last edition and has expanded its contents to include the multidisciplinary perspective that is making control engineering a critical component in so many fields. Now expanded from one to three volumes, The Control Handbook, Second Edition organizes cutting-edge contributions from more than 200 leading experts. The second volume, Control System Applications, includes 35 entirely new applications organized by subject area. Covering the design and use of control systems, this volume includes applications for: Automobiles, including PEM fuel cells Aerospace Industrial control of machines and processes Biomedical uses, including robotic surgery and drug discovery and development Electronics and communication networks Other applications are included in a section that reflects the multidisciplinary nature of control system work. These include applications for the construction of financial portfolios, earthquake response control for civil structures, quantum estimation and control, and the modeling and control of air conditioning and refrigeration systems. As with the first edition, the new edition not only stands as a record of accomplishment in control engineering but provides researchers with the means to make further advances. Progressively organized, the other two volumes in the set include: Control System Fundamentals Control System Advanced Methods

Download or read book The Control Handbook three volume set written by William S. Levine and published by CRC Press. This book was released on 2018-10-08 with total page 3379 pages. Available in PDF, EPUB and Kindle. Book excerpt: At publication, The Control Handbook immediately became the definitive resource that engineers working with modern control systems required. Among its many accolades, that first edition was cited by the AAP as the Best Engineering Handbook of 1996. Now, 15 years later, William Levine has once again compiled the most comprehensive and authoritative resource on control engineering. He has fully reorganized the text to reflect the technical advances achieved since the last edition and has expanded its contents to include the multidisciplinary perspective that is making control engineering a critical component in so many fields. Now expanded from one to three volumes, The Control Handbook, Second Edition brilliantly organizes cutting-edge contributions from more than 200 leading experts representing every corner of the globe. They cover everything from basic closed-loop systems to multi-agent adaptive systems and from the control of electric motors to the control of complex networks. Progressively organized, the three volume set includes: Control System Fundamentals Control System Applications Control System Advanced Methods Any practicing engineer, student, or researcher working in fields as diverse as electronics, aeronautics, or biomedicine will find this handbook to be a time-saving resource filled with invaluable formulas, models, methods, and innovative thinking. In fact, any physicist, biologist, mathematician, or researcher in any number of fields developing or improving products and systems will find the answers and ideas they need. As with the first edition, the new edition not only stands as a record of accomplishment in control engineering but provides researchers with the means to make further advances.

Download or read book Feedback Control of MEMS to Atoms written by Jason J. Gorman and published by Springer Science & Business Media. This book was released on 2011-12-16 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control from MEMS to Atoms illustrates the use of control and control systems as an essential part of functioning integrated systems. The book is organized according to the dimensional scale of the problem, starting with micro-scale systems and ending with atomic-scale systems. Similar to macro-scale machines and processes, control systems can play a major role in improving the performance of micro- and nano-scale systems and in enabling new capabilities that would otherwise not be possible. However, the majority of problems at these scales present many new challenges that go beyond the current state-of-the-art in control engineering. This is a result of the multidisciplinary nature of micro/nanotechnology, which requires the merging of control engineering with physics, biology and chemistry.

Download or read book Dynamics and Control of Process Systems 2004 written by Sirish Shah and published by Elsevier. This book was released on 2005-06-10 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Monitoring Polymerization Reactions written by Wayne F. Reed and published by John Wiley & Sons. This book was released on 2014-01-21 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers new strategies to optimize polymer reactions With contributions from leading macromolecular scientists and engineers, this book provides a practical guide to polymerization monitoring. It enables laboratory researchers to optimize polymer reactions by providing them with a better understanding of the underlying reaction kinetics and mechanisms. Moreover, it opens the door to improved industrial-scale reactions, including enhanced product quality and reduced harmful emissions. Monitoring Polymerization Reactions begins with a review of the basic elements of polymer reactions and their kinetics, including an overview of stimuli-responsive polymers. Next, it explains why certain polymer and reaction characteristics need to be monitored. The book then explores a variety of practical topics, including: Principles and applications of important polymer characterization tools, such as light scattering, gel permeation chromatography, calorimetry, rheology, and spectroscopy Automatic continuous online monitoring of polymerization (ACOMP) reactions, a flexible platform that enables characterization tools to be employed simultaneously during reactions in order to obtain a complete record of multiple reaction features Modeling of polymerization reactions and numerical approaches Applications that optimize the manufacture of industrially important polymers Throughout the book, the authors provide step-by-step strategies for implementation. In addition, ample use of case studies helps readers understand the benefits of various monitoring strategies and approaches, enabling them to choose the best one to match their needs. As new stimuli-responsive and "intelligent" polymers continue to be developed, the ability to monitor reactions will become increasingly important. With this book as their guide, polymer scientists and engineers can take full advantage of the latest monitoring strategies to optimize reactions in both the lab and the manufacturing plant.

Download or read book Theory of Particulate Processes written by Alan Ranodolph and published by Elsevier. This book was released on 2012-12-02 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory of Particulate Processes: Analysis and Techniques of Continuous Crystallization, Second Edition covers the numerous population balance-based particulate studies. This edition emerged from the notes for an industrial short course on crystallization. This book is divided into 10 chapters and begins with an outline of the methods for representation of particle distributions and a systematic approach to the predictive modeling of processes where there is a need to characterize distributions in time and space and by some identifying property. The succeeding chapters provide a specific and more elementary approach to modeling crystal size distributions, as well as the modeling the kinetics of crystal nucleation and growth rates. Other chapters discuss a wide range of system analysis and design considerations specific to crystallization for both the steady state and unsteady state. The final chapters illustrate the use of a population balance analysis to interpret data from both laboratory and process equipment. These chapters also explore a wide variety of particulate processes and systems for which the population balance analysis is useful. This book is of great value to graduate students with particulate systems course.

Download or read book Informatics in Control Automation and Robotics II written by Joaquim Filipe and published by Springer Science & Business Media. This book was released on 2007-06-02 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of the best papers presented at the 2nd International Conference on Informatics in Control, Automation and Robotics (ICINCO). ICINCO brought together researchers, engineers and practitioners interested in the application of informatics to Control, Automation and Robotics. The research papers focused on real world applications, covering three main themes: Intelligent Control Systems, Optimization, Robotics and Automation and Signal Processing, Systems Modeling and Control.

Download or read book Multi Objective Optimization Problems written by Fran Sérgio Lobato and published by Springer. This book was released on 2017-07-03 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is aimed at undergraduate and graduate students in applied mathematics or computer science, as a tool for solving real-world design problems. The present work covers fundamentals in multi-objective optimization and applications in mathematical and engineering system design using a new optimization strategy, namely the Self-Adaptive Multi-objective Optimization Differential Evolution (SA-MODE) algorithm. This strategy is proposed in order to reduce the number of evaluations of the objective function through dynamic update of canonical Differential Evolution parameters (population size, crossover probability and perturbation rate). The methodology is applied to solve mathematical functions considering test cases from the literature and various engineering systems design, such as cantilevered beam design, biochemical reactor, crystallization process, machine tool spindle design, rotary dryer design, among others.

Download or read book Detection and Management of Actuator Faults in Controlled Particulate Processes written by Arthi Giridhar and published by . This book was released on 2007 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2710 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dynamics and Control of Process Systems 2001 DYCOPS 6 written by George Stephanopoulos and published by Pergamon. This book was released on 2001 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings contains papers presented at the sixth IFAC Symposium on Dynamics and Control of Chemical Processes (DYCOPS 2001), which was held on Jejudo Island, Korea, on June 4-6, 2001. The triennial DYCOPS symposium is one of IFAC's highest-profile regular events, and has established an enviable reputation for quality. The reputation and coverage of DYCOPS ensures that these events always provide a comprehensive showcase of the best and latest research into all aspects of process control. DYCOPS-6 had as its theme "Bridging Engineering with Science," and explored how the process control community should react to wider developments in chemical engineering research, where molecular-level phenomena and product design as related to materials and biotechnology are becoming increasingly important. Featuring papers by many of the world's leading experts in process control, the Proceedings of DYCOPS-6 form an indispensable resource for process control engineers and for chemical engineers seeking to understand the latest developments in chemical process control. Altogether over 100 papers are presented, on topics such as batch process control, model predictive control, control of distillation columns, fault detection, and many others.

Download or read book Practical Design and Application of Model Predictive Control written by Nassim Khaled and published by Butterworth-Heinemann. This book was released on 2018-05-04 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Design and Application of Model Predictive Control is a self-learning resource on how to design, tune and deploy an MPC using MATLAB® and Simulink®. This reference is one of the most detailed publications on how to design and tune MPC controllers. Examples presented range from double-Mass spring system, ship heading and speed control, robustness analysis through Monte-Carlo simulations, photovoltaic optimal control, and energy management of power-split and air-handling control. Readers will also learn how to embed the designed MPC controller in a real-time platform such as Arduino®. The selected problems are nonlinear and challenging, and thus serve as an excellent experimental, dynamic system to show the reader the capability of MPC. The step-by-step solutions of the problems are thoroughly documented to allow the reader to easily replicate the results. Furthermore, the MATLAB® and Simulink® codes for the solutions are available for free download. Readers can connect with the authors through the dedicated website which includes additional free resources at www.practicalmpc.com. - Illustrates how to design, tune and deploy MPC for projects in a quick manner - Demonstrates a variety of applications that are solved using MATLAB® and Simulink® - Bridges the gap in providing a number of realistic problems with very hands-on training - Provides MATLAB® and Simulink® code solutions. This includes nonlinear plant models that the reader can use for other projects and research work - Presents application problems with solutions to help reinforce the information learned

Download or read book Process Dynamics Modeling and Control written by Babatunde Ayodeji Ogunnaike and published by Topics in Chemical Engineering. This book was released on 1994 with total page 1260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text offers a modern view of process control in the context of today's technology. It provides the standard material in a coherent presentation and uses a notation that is more consistent with the research literature in process control. Topics that are unique include a unified approach to model representations, process model formation and process identification, multivariable control, statistical quality control, and model-based control. This book is designed to be used as an introductory text for undergraduate courses in process dynamics and control. In addition to chemical engineering courses, the text would also be suitable for such courses taught in mechanical, nuclear, industrial, and metallurgical engineering departments. The material is organized so that modern concepts are presented to the student but details of the most advanced material are left to later chapters. The text material has been developed, refined, and classroom tested over the last 10-15 years at the University of Wisconsin and more recently at the University of Delaware. As part of the course at Wisconsin, a laboratory has been developed to allow the students hands-on experience with measurement instruments, real time computers, and experimental process dynamics and control problems.

Download or read book Introduction to Modeling and Control of Internal Combustion Engine Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal combustion engines still have a potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. These goals can be achieved with help of control systems. Modeling and Control of Internal Combustion Engines (ICE) addresses these issues by offering an introduction to cost-effective model-based control system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed in the text and selected feedforward and feedback control problems are discussed. The appendix contains a summary of the most important controller analysis and design methods, and a case study that analyzes a simplified idle-speed control problem. The book is written for students interested in the design of classical and novel ICE control systems.

Download or read book Book of Abstracts written by Institution of Chemical Engineers, The and published by . This book was released on 2005 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: CD-ROM contains conference manuscripts.

Download or read book Process Modelling and Simulation written by César de Prada and published by MDPI. This book was released on 2019-09-23 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since process models are nowadays ubiquitous in many applications, the challenges and alternatives related to their development, validation, and efficient use have become more apparent. In addition, the massive amounts of both offline and online data available today open the door for new applications and solutions. However, transforming data into useful models and information in the context of the process industry or of bio-systems requires specific approaches and considerations such as new modelling methodologies incorporating the complex, stochastic, hybrid and distributed nature of many processes in particular. The same can be said about the tools and software environments used to describe, code, and solve such models for their further exploitation. Going well beyond mere simulation tools, these advanced tools offer a software suite built around the models, facilitating tasks such as experiment design, parameter estimation, model initialization, validation, analysis, size reduction, discretization, optimization, distributed computation, co-simulation, etc. This Special Issue collects novel developments in these topics in order to address the challenges brought by the use of models in their different facets, and to reflect state of the art developments in methods, tools and industrial applications.