Download or read book Nonlinear Kalman Filter for Multi Sensor Navigation of Unmanned Aerial Vehicles written by Jean-Philippe Condomines and published by Elsevier. This book was released on 2018-11-14 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Kalman Filter for Multi-Sensor Navigation of Unmanned Aerial Vehicles covers state estimation development approaches for Mini-UAV. The book focuses on Kalman filtering technics for UAV design, proposing a new design methodology and case study related to inertial navigation systems for drones. Both simulation and real experiment results are presented, thus showing new and promising perspectives. - Gives a state estimation development approach for mini-UAVs - Explains Kalman filtering techniques - Introduce a new design method for unmanned aerial vehicles - Introduce cases relating to the inertial navigation system of drones
Download or read book Robotic Manipulators and Vehicles written by Gerasimos Rigatos and published by Springer. This book was released on 2018-05-24 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph addresses problems of: • nonlinear control, estimation and filtering for robotic manipulators (multi-degree-of freedom rigid-link robots, flexible-link robots, underactuated, redundant and cooperating manipulators and closed-chain robotic mechanisms); and• nonlinear control, estimation and filtering for autonomous robotic vehicles operating on the ground, in the air, and on and under water, independently and in cooperating groups. The book is a thorough treatment of the entire range of applications of robotic manipulators and autonomous vehicles. The nonlinear control and estimation methods it develops can be used generically, being suitable for a wide range of robotic systems. Such methods can improve robustness, precision and fault-tolerance in robotic manipulators and vehicles at the same time as enabling the reliable functioning of these systems under variable conditions, model uncertainty and external perturbations.
Download or read book Multi Robot Systems written by Toshiyuki Yasuda and published by BoD – Books on Demand. This book was released on 2011-01-30 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of 29 excellent works and comprised of three sections: task oriented approach, bio inspired approach, and modeling/design. In the first section, applications on formation, localization/mapping, and planning are introduced. The second section is on behavior-based approach by means of artificial intelligence techniques. The last section includes research articles on development of architectures and control systems.
Download or read book Multi Sensor Information Fusion written by Xue-Bo Jin and published by MDPI. This book was released on 2020-03-23 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes papers from the section “Multisensor Information Fusion”, from Sensors between 2018 to 2019. It focuses on the latest research results of current multi-sensor fusion technologies and represents the latest research trends, including traditional information fusion technologies, estimation and filtering, and the latest research, artificial intelligence involving deep learning.
Download or read book Handbook of Research on Advancements in Robotics and Mechatronics written by Habib, Maki K. and published by IGI Global. This book was released on 2014-12-31 with total page 1123 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of mechatronics integrates modern engineering science and technologies with new ways of thinking, enhancing the design of products and manufacturing processes. This synergy enables the creation and evolution of new intelligent human-oriented machines. The Handbook of Research on Advancements in Robotics and Mechatronics presents new findings, practices, technological innovations, and theoretical perspectives on the the latest advancements in the field of mechanical engineering. This book is of great use to engineers and scientists, students, researchers, and practitioners looking to develop autonomous and smart products and systems for meeting todays challenges.
Download or read book Advances in Guidance Navigation and Control written by Liang Yan and published by Springer Nature. This book was released on 2023-02-10 with total page 7455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features the latest theoretical results and techniques in the field of guidance, navigation, and control (GNC) of vehicles and aircrafts. It covers a wide range of topics, including but not limited to, intelligent computing communication and control; new methods of navigation, estimation and tracking; control of multiple moving objects; manned and autonomous unmanned systems; guidance, navigation and control of miniature aircraft; and sensor systems for guidance, navigation and control etc. Presenting recent advances in the form of illustrations, tables, and text, it also provides detailed information of a number of the studies, to offer readers insights for their own research. In addition, the book addresses fundamental concepts and studies in the development of GNC, making it a valuable resource for both beginners and researchers wanting to further their understanding of guidance, navigation, and control.
Download or read book Advances in Aerospace Guidance Navigation and Control written by Bogusław Dołęga and published by Springer. This book was released on 2017-12-15 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first three CEAS (Counsil of European Aerospace Societies) Specialist Conferences on Guidance, Navigation and Control (CEAS EuroGNC) were held in Munich, Germany in 2011, in Delft, Netherlands in 2013 and in Toulouse, France in 2017. The Warsaw University of Technology (WUT) and the Rzeszow University of Technology (RzUT) accepted the challenge of jointly organizing the 4th edition. The conference aims to promote scientific and technical excellence in the fields of Guidance, Navigation and Control (GNC) in aerospace and other fields of technology. The Conference joins together the industry with the academia research. This book covers four main topics: Guidance and Control, Control Theory Application, Navigation, UAV Control and Dynamic. The papers included focus on the most advanced and actual topics in guidance, navigation and control research areas: · Control theory, analysis, and design · ; Novel navigation, estimation, and tracking methods · Aircraft, spacecraft, missile and UAV guidance, navigation, and control · Flight testing and experimental results · Intelligent control in aerospace applications · Aerospace robotics and unmanned/autonomous systems · Sensor systems for guidance, navigation and control · Guidance, navigation, and control concepts in air traffic control systems For the 4th CEAS Specialist Conference on Guidance, Navigation and Control the International Technical Committee established a formal review process. Each paper was reviewed in compliance with good journal practices by independent and anonymous reviewers. At the end of the review process papers were selected for publication in this book.
Download or read book Aerial Manipulation written by Matko Orsag and published by Springer. This book was released on 2017-09-19 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a thorough treatment of the rapidly growing area of aerial manipulation. It details all the design steps required for the modeling and control of unmanned aerial vehicles (UAV) equipped with robotic manipulators. Starting with the physical basics of rigid-body kinematics, the book gives an in-depth presentation of local and global coordinates, together with the representation of orientation and motion in fixed- and moving-coordinate systems. Coverage of the kinematics and dynamics of unmanned aerial vehicles is developed in a succession of popular UAV configurations for multirotor systems. Such an arrangement, supported by frequent examples and end-of-chapter exercises, leads the reader from simple to more complex UAV configurations. Propulsion-system aerodynamics, essential in UAV design, is analyzed through blade-element and momentum theories, analysis which is followed by a description of drag and ground-aerodynamic effects. The central part of the book is dedicated to aerial-manipulator kinematics, dynamics, and control. Based on foundations laid in the opening chapters, this portion of the book is a structured presentation of Newton–Euler dynamic modeling that results in forward and backward equations in both fixed- and moving-coordinate systems. The Lagrange–Euler approach is applied to expand the model further, providing formalisms to model the variable moment of inertia later used to analyze the dynamics of aerial manipulators in contact with the environment. Using knowledge from sensor data, insights are presented into the ways in which linear, robust, and adaptive control techniques can be applied in aerial manipulation so as to tackle the real-world problems faced by scholars and engineers in the design and implementation of aerial robotics systems. The book is completed by path and trajectory planning with vision-based examples for tracking and manipulation.
Download or read book State Estimation for Robotics written by Timothy D. Barfoot and published by Cambridge University Press. This book was released on 2017-07-31 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern look at state estimation, targeted at students and practitioners of robotics, with emphasis on three-dimensional applications.
Download or read book Intelligent Industrial Systems Modeling Automation and Adaptive Behavior written by Rigatos, Gerasimos and published by IGI Global. This book was released on 2010-06-30 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, there has been growing interest in industrial systems, especially in robotic manipulators and mobile robot systems. As the cost of robots goes down and become more compact, the number of industrial applications of robotic systems increases. Moreover, there is need to design industrial systems with intelligence, autonomous decision making capabilities, and self-diagnosing properties. Intelligent Industrial Systems: Modeling, Automation and Adaptive Behavior analyzes current trends in industrial systems design, such as intelligent, industrial, and mobile robotics, complex electromechanical systems, fault diagnosis and avoidance of critical conditions, optimization, and adaptive behavior. This book discusses examples from major areas of research for engineers and researchers, providing an extensive background on robotics and industrial systems with intelligence, autonomy, and adaptive behavior giving emphasis to industrial systems design.
Download or read book Intelligent Renewable Energy Systems written by Gerasimos Rigatos and published by Springer. This book was released on 2016-08-06 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focused on renewable energy systems and the development of information and communication technologies (ICTs) for their integration in smart grids, this book presents recent advances and methods that help to ensure that power generation from renewable sources remains stable, that power losses are minimized, and that the reliable functioning of these power generation units is maintained. The book highlights key topics and technologies for renewable energy systems including the intelligent control of power generators, power electronics that connect renewable power generation units to the grid, and fault diagnosis for power generators and power electronics. In particular, the following topics are addressed: • Modeling and control of power generators (PMSGs, DFIGs); • Modeling and control of power electronics (converters, inverters); • Modeling and fault diagnosis of the transmission and distribution Grid; and • Modelling and control of distributed power generation units (interconnected synchronous generators or photovoltaic units). Because of the above coverage, members of the wider engineering community will find that the nonlinear control and estimation methods presented provide essential insights into the functioning of renewable energy power systems, while the academic community will find the book a valuable textbook for undergraduate or graduate courses on renewable energy systems.
Download or read book Intelligent Autonomous Systems 14 written by Weidong Chen and published by Springer. This book was released on 2017-02-10 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest research advances, innovations, and visions in the field of robotics as presented by leading researchers, engineers, and practitioners from around the world at the 14th International Conference on Intelligent Autonomous Systems (IAS-14), held in Shanghai, China in July 2016. The contributions amply demonstrate that robots, machines and systems are rapidly achieving intelligence and autonomy, attaining more and more capabilities such as mobility and manipulation, sensing and perception, reasoning, and decision-making. They cover a wide range of research results and applications, and particular attention is paid to the emerging role of autonomous robots and intelligent systems in industrial production, which reflects their maturity and robustness. The contributions were selected by means of a rigorous peer-review process and highlight many exciting and visionary ideas that will further galvanize the research community and spur novel research directions. The series of biennial IAS conferences, which began in 1986, represents a premiere event in the field of robotics.
Download or read book Proceedings of 2023 7th Chinese Conference on Swarm Intelligence and Cooperative Control written by Jianglong Yu and published by Springer Nature. This book was released on with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intelligent Unmanned Air Vehicles Communications for Public Safety Networks written by Zeeshan Kaleem and published by Springer Nature. This book was released on 2022-05-06 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the potential use cases and intelligent technologies, UAV layered architectures, research findings, experimental results, and standardization for intelligent UAV communications for public safety networks. This book will cover the conventional non-intelligent and intelligent solutions specifically targeting UAV communications for public safety networks. Moreover, reconfigurable intelligent surface (RIS) has recently attracted researchers and academician attention because its ability improves the propagation environment and enhances communication quality by intelligently reflecting the received signals. Leveraging intelligence into RIS-assisted UAV communications will meet the requirements of the intelligent, green, and sustainable 5G and beyond cellular networks, which makes it a potential candidate to overcome the inherent drawbacks of legacy wireless systems. The topics covered in this book will be of interest to both the professionals and students. 3D UAV placements schemes, trajectory design, interference management schemes, reinforcement learning solutions for more intelligent and trained solutions, joint UAV trajectory and RIS's passive beamforming design, and various other related topics of readers' interest are presented in detail.
Download or read book Unmanned Aircraft Systems written by Ella Atkins and published by John Wiley & Sons. This book was released on 2017-01-17 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: UNMANNED AIRCRAF T SYSTEMS UNMANNED AIRCRAF T SYSTEMS An unmanned aircraft system (UAS), sometimes called a drone, is an aircraft without a human pilot on board ??? instead, the UAS can be controlled by an operator station on the ground or may be autonomous in operation. UAS are capable of addressing a broad range of applications in diverse, complex environments. Traditionally employed in mainly military applications, recent regulatory changes around the world are leading to an explosion of interest and wide-ranging new applications for UAS in civil airspace. Covering the design, development, operation, and mission profiles of unmanned aircraft systems, this single, comprehensive volume forms a complete, stand-alone reference on the topic. The volume integrates with the online Wiley Encyclopedia of Aerospace Engineering, providing many new and updated articles for existing subscribers to that work. The chapters cover the following items: Airframe configurations and design (launch systems, power generation, propulsion) Operations (missions, integration issues, and airspace access) Coordination (multivehicle cooperation and human oversight) With contributions from leading experts, this volume is intended to be a valuable addition, and a useful resource, for aerospace manufacturers and suppliers, governmental and industrial aerospace research establishments, airline and aviation industries, university engineering and science departments, and industry analysts, consultants, and researchers.
Download or read book Automotive Informatics and Communicative Systems Principles in Vehicular Networks and Data Exchange written by Guo, Huaqun and published by IGI Global. This book was released on 2009-04-30 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances the understanding of management methods, information technology, and their joint application in business processes.
