Download or read book Nonlinear Finite Element Analysis of Steel Frame written by Nadia Ashikin Zainal Bahri and published by . This book was released on 2012 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Finite Element Analysis and Design of Metal Structures written by Ehab Ellobody and published by Elsevier. This book was released on 2013-09-05 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, engineers have used laboratory testing to investigate the behavior of metal structures and systems. These numerical models must be carefully developed, calibrated and validated against the available physical test results. They are commonly complex and very expensive. From concept to assembly, Finite Element Analysis and Design of Metal Structures provides civil and structural engineers with the concepts and procedures needed to build accurate numerical models without using expensive laboratory testing methods. Professionals and researchers will find Finite Element Analysis and Design of Metal Structures a valuable guide to finite elements in terms of its applications. - Presents design examples for metal tubular connections - Simplified review for general steps of finite element analysis - Commonly used linear and nonlinear analyses in finite element modeling - Realistic examples of concepts and procedures for Finite Element Analysis and Design

Download or read book Non Linear Static and Cyclic Analysis of Steel Frames with Semi Rigid Connections written by Siu-Lai Chan and published by Elsevier. This book was released on 2000-05-19 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the discussion and studies of simple and efficient numerical procedures for large deflection and elasto-plastic analysis of steel frames under static and dynamic loading. In chapter 1, the basic fundamental behaviour and philosophy for design of structural steel is discussed, emphasising different modes of buckling and the inter-relationship between different types of analysis. In addition to this, different levels of refinement for non-linear analysis are described. An introduction is also given to the well-known P-&dgr; and P-&Dgr; effects. Chapter 2 presents the basic matrix method of analysis and gives several examples of linear analysis of semi-rigid pointed frames. It is evident from this that one must have a good understanding of first-order linear analysis before handling a second-order non-linear analysis. In chapter 3, the linearized bifurcation and second-order large deflection are compared and the detailed procedure for a second-order analysis based on the Newton-Raphson scheme is described. Chapter 4 introduces various solution schemes for tracing of post-buckling equilibrium paths and the Minimum Residual Displacement control method with arc-length load step control is employed for the post-buckling analysis of two and three dimensional structures. Chapter 5 addresses the non-linear behaviour and modelling of semi-rigid connections while several numerical functions for description of moment versus rotation curves of typical connection types are introduced. The scope of the work in chapter 6 covers semi-rigid connections and material yielding to the static analysis of steel frames. Chapter 7 studies the cyclic response of steel frames with semi-rigid joints and elastic material characteristics. In the last chapter the combined effects of semi-rigid connections and plastic hinges on steel frames under time-dependent loads are studied using a simple springs-in-series model. For computational effectiveness and efficiency, the concentrated plastic hinge concept is used throughout these studies.

Download or read book Nonlinear Dynamic Finite Element Analysis of Steel Frames with Semi rigid Joints written by Ali Abolmaali and published by . This book was released on 1999 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Non linear Finite Element Analysis of Steel Frames in Fire Conditions written by Hassan A. Saab and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Steel Composite Structures written by and published by Research Publishing Service. This book was released on 2010 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nonlinear Finite Element Analysis of Composite and Reinforced Concrete Beams written by Xiaoshan Lin and published by Woodhead Publishing. This book was released on 2019-10-18 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Finite Element Analysis of Composite and Reinforced Concrete Beams presents advanced methods and techniques for the analysis of composite and FRP reinforced concrete beams. The title introduces detailed numerical modeling methods and the modeling of the structural behavior of composite beams, including critical interfacial bond-slip behavior. It covers a new family of composite beam elements developed by the authors. Other sections cover nonlinear finite element analysis procedures and the numerical modeling techniques used in commercial finite element software that will be of particular interest to engineers and researchers executing numerical simulations. - Gives advanced methods and techniques for the analysis of composite and fiber Reinforced Plastic (FRP) and reinforced concrete beams - Presents new composite beam elements developed by the authors - Introduces numerical techniques for the development of effective finite element models using commercial software - Discusses the critical issues encountered in structural analysis - Maintains a clear focus on advanced numerical modeling

Download or read book Nonlinear Finite Element Analysis and Adina written by K. J. Bathe and published by Elsevier. This book was released on 2014-05-23 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Finite Element Analysis and ADINA contains the proceedings of the Fourth ADINA Conference held at Massachusetts Institute of Technology on June 15-17, 1983. Separating the papers presented in the conference as chapters, this book first elucidates the use of ADINA for analysis of mines with explosive fills. Subsequent chapters explore the use of ADINA in soil mechanics; nonlinear shell analysis; analysis of bond between prestressed steel and concrete; determination and simulation of stable crack growth; offshore structures analysis; modeling of traveling-loads and time-dependent masses; and comparison of two slideline methods. Other notable applications of ADINA are also shown.

Download or read book Why Do Nonlinear Finite Element Analysis written by A. M. Prior and published by . This book was released on 1998 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Finite Element Analysis and Design of Steel and Steel Concrete Composite Bridges written by Ehab Ellobody and published by Butterworth-Heinemann. This book was released on 2014-05-30 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, bridge engineers and researchers are increasingly turning to the finite element method for the design of Steel and Steel-Concrete Composite Bridges. However, the complexity of the method has made the transition slow. Based on twenty years of experience, Finite Element Analysis and Design of Steel and Steel-Concrete Composite Bridges provides structural engineers and researchers with detailed modeling techniques for creating robust design models. The book's seven chapters begin with an overview of the various forms of modern steel and steel–concrete composite bridges as well as current design codes. This is followed by self-contained chapters concerning: nonlinear material behavior of the bridge components, applied loads and stability of steel and steel–concrete composite bridges, and design of steel and steel–concrete composite bridge components. - Constitutive models for construction materials including material non-linearity and geometric non-linearity - The mechanical approach including problem setup, strain energy, external energy and potential energy), mathematics behind the method - Commonly available finite elements codes for the design of steel bridges - Explains how the design information from Finite Element Analysis is incorporated into Building information models to obtain quantity information, cost analysis

Download or read book Advanced Analysis for Three Dimensional Semi Rigid Steel Frames subjected to Static and Dynamic Loadings written by Phu-Cuong Nguyen and published by GRIN Verlag. This book was released on 2023-05-26 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doctoral Thesis / Dissertation from the year 2014 in the subject Engineering - Civil Engineering, grade: 9, , course: Advanced Steel Structures, language: English, abstract: This dissertation presents three various advanced analysis approaches which can capture accurately and efficiently the ultimate strength and behavior of steel framed structures with nonlinear beam-to-column connections subjected to static and dynamic loadings. Three major sources of nonlinearity are considered in the analyses as follows: (1) material nonlinearity; (2) geometric nonlinearity; and (3) connection nonlinearity. Three types of nonlinear beam-column element formulation considering both geometric and material nonlinearities are coded into two nonlinear structural analysis programs: (1) Nonlinear Structural Analysis Program (NSAP) – 2-D plastic-zone finite element; (2) Practical Advanced Analysis Program (PAAP) – 3-D refined plastic-hinge element and 3-D plastic-fiber element. Three types of steel frames analyzed by the proposed program are: (1) rigid frames – beam-to-column connections are fully rigid; (2) linear semi-rigid frames – beam-to-column connections have constant stiffness; and (3) nonlinear semi-rigid frames – beam-to-column connections have continuously variable stiffness. Three types of analysis can be performed are: (1) nonlinear inelastic static analysis; (2) nonlinear elastic and inelastic time-history analysis; and (3) free vibration analysis. Three main resources of damping are taken into account in the proposed programs are: (1) hysteretic damping due to inelastic material; (2) structural viscous damping employing Rayleigh damping; (3) hysteretic damping due to nonlinear beam-to-column connections. Two computer programs are developed: (1) Nonlinear Structural Analysis Program (NSAP) – written in the C++ programming language; (2) Practical Advanced Analysis Program (PAAP) – written in the FORTRAN 77 programming language. They are verified for accuracy and computational efficiency by comparing predicted results with those generated by the commercial finite element analysis packages of ABAQUS and SAP2000, and other results available in the literature. Through several numerical examples, the proposed program (PAAP) proves to be a reliable and efficient tool for daily practice design in lieu of using costly and time-consuming commercial software.

Download or read book Advanced Analysis of Steel Frames written by W.F. Chen and published by CRC Press. This book was released on 2018-01-18 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of the limit state approach to design in recent years has focused particular attention on two basic requirements: accurate information regarding the behavior of structures throughout the entire range of loading up to the ultimate strength, and simple practical procedures to enable engineers to assess this behavior. This book satisfies these requirements by providing practical analysis methods for the design of steel frames. The book contains a wide range of second-order analyses: from elastic to inelastic, rigid to semi-rigid connections, and simple plastic hinge method to sophisticated plastic-zone method. Computer programs for each analysis are provided in the form of a floppy disk for easy implementation. Sample problems are described and user's manuals are well documented for each program developed in the book.

Download or read book Finite Element Analysis for Building Assessment written by Paulo B. Lourenço and published by Taylor & Francis. This book was released on 2022-05-24 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Existing structures represent a heterogeneous category in the global built environment as often characterized by the presence of archaic materials, damage and disconnections, uncommon construction techniques and subsequent interventions throughout the building history. In this scenario, the common linear elastic analysis approach adopted for new buildings is incapable of an accurate estimation of structural capacity, leading to overconservative results, invasive structural strengthening, added intervention costs, excessive interference to building users and possible losses in terms of aesthetics or heritage values. For a rational and sustainable use of the resources, this book deals with advanced numerical simulations, adopting a practical approach to introduce the fundamentals of Finite Element Method, nonlinear solution procedures and constitutive material models. Recommended material properties for masonry, timber, reinforced concrete, iron and steel are discussed according to experimental evidence, building standards and codes of practice. The examples examined throughout the book and in the conclusive chapter support the analyst’s decision-making process toward a safe and efficient use of finite element analysis. Written primarily for practicing engineers, the book is of value to students in engineering and technical architecture with solid knowledge in the field of continuum mechanics and structural design.

Download or read book Nonlinear Finite Element Analysis of Solids and Structures written by René de Borst and published by John Wiley & Sons. This book was released on 2012-07-25 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Built upon the two original books by Mike Crisfield and their own lecture notes, renowned scientist René de Borst and his team offer a thoroughly updated yet condensed edition that retains and builds upon the excellent reputation and appeal amongst students and engineers alike for which Crisfield's first edition is acclaimed. Together with numerous additions and updates, the new authors have retained the core content of the original publication, while bringing an improved focus on new developments and ideas. This edition offers the latest insights in non-linear finite element technology, including non-linear solution strategies, computational plasticity, damage mechanics, time-dependent effects, hyperelasticity and large-strain elasto-plasticity. The authors' integrated and consistent style and unrivalled engineering approach assures this book's unique position within the computational mechanics literature. Key features: Combines the two previous volumes into one heavily revised text with obsolete material removed, an improved layout and updated references and notations Extensive new material on more recent developments in computational mechanics Easily readable, engineering oriented, with no more details in the main text than necessary to understand the concepts. Pseudo-code throughout makes the link between theory and algorithms, and the actual implementation. Accompanied by a website (www.wiley.com/go/deborst) with a Python code, based on the pseudo-code within the book and suitable for solving small-size problems. Non-linear Finite Element Analysis of Solids and Structures, 2nd Edition is an essential reference for practising engineers and researchers that can also be used as a text for undergraduate and graduate students within computational mechanics.

Download or read book Nonlinear Static Analysis of Three dimensional Steel Frames written by James Graham Orbison and published by . This book was released on 1982 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Finite Element Analysis of Prestressed Concrete Structures Using Post Tensioning Steel written by Yu Huang and published by Cambridge Scholars Publishing. This book was released on 2020-05-28 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the theory and applications of finite element (FE) modeling of post-tensioned (PT) concrete structures, and provides the updated MATLAB code (as of 2019). The challenge of modeling PT prestressed concrete structures lies in the treatment of the interface between the concrete and prestressing tendons. Using MATLAB, this study develops an innovative nonlinear FE formulation which incorporates contact techniques and engineering elements to considerably reduce the need of computational power. This FE formulation has the ability to simulate different PT frame systems with fully bonded, fully unbonded or partially bonded tendons, as well as actual sliding behavior and frictional effects in the tendons. It also allows for the accurate simulation of anchor seating loss.

Download or read book Analysis of Monotonic and Cyclic Stability of Steel Frame Subassemblages written by Donald Woodrow White and published by . This book was released on 1988 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: