Download or read book Nonlinear Electromechanical Couplings written by G. A. Maugin and published by . This book was released on 1992-10-13 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers an updated and rigorous treatise on most manifestations of nonlinear electromechanical couplings in dielectric media with applications to piezoelectric and ferroelectric crystals, piezoelectric powders and solutions of electrodeformable macromolecules. Presents a variety of static and dynamic nonlinear effects which have important engineering applications. Contains an insight into the nonlinear behavior of such new substances as ceramics, powders and ferroelectrics. Rigorous mathematical treatment includes hyberbolic systems, asymptotic expansions, singular perturbations, convexity and soliton theory.
Download or read book Nonlinear Electromechanical Couplings written by Gérard A. Maugin and published by Manchester University Press. This book was released on 1992-01-01 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is concerned with (i) the formulation of nonlinear models of electrodeformable continua, essentially of the solid type, but with some slight incursion in the realm of fluid solutions (presenting a deformable solid-like microstructure), and (ii) the applied mathematical study of the numerous effects that arise in this framework. For the basics, it draws heavily on modern continuum mechanics (where great care is taken of both geometrical and physical nonlinearities) and the electrodynamics of continua cast in this modern framework which allows scietists to deal with electric fields of high intensity.
Download or read book ASME 67 VIBR 30 written by Daniel D. Kana and published by . This book was released on 1967 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to the Theory of Piezoelectricity written by Jiashi Yang and published by Springer Science & Business Media. This book was released on 2006-06-14 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on lecture notes for a graduate course that has been offered at University of Nebraska-Lincoln on and off since 1998. The course is intended to provide graduate students with the basic aspects of the continuum modeling of electroelastic interactions in solids. A concise treatment of linear, nonlinear, static and dynamic theories and problems is presented. The emphasis is on formulation and understanding of problems useful in device applications rather than solution techniques of mathematical problems. The mathematics used in the book is minimal. The book is suitable for a one-semester graduate course on electroelasticity. It can also be used as a reference for researchers. I would like to take this opportunity to thank UNL for a Maude Hammond Fling Faculty Research Fellowship in 2003 for the preparation of the first draft of this book. I also wish to thank Ms. Deborah Derrick of the College of Engineering and Technology at UNL for editing assistance with the book, and Professor David Y. Gao of Virginia Polytechnic Institute and State University for recommending this book to Kluwer for publication in the series of Advances in Mechanics and Mathematics. JSY Lincoln, Nebraska 2004 Preface Electroelastic materials exhibit electromechanical coupling. They experience mechanical deformations when placed in an electric field, and become electrically polarized under mechanical loads. Strictly speaking, piezoelectricity refers to linear electromechanical couplings only.
Download or read book Electromechanical Coupling and Nonlinear Effects in Kinetic Energy Harvesters written by Eoghan O'Riordan and published by . This book was released on 2016 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Mechanics of Complex Structures written by Holm Altenbach and published by Springer Nature. This book was released on 2021-07-29 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers different topics of nonlinear mechanics in complex structures, such as the appearance of new nonlinear phenomena and the behavior of finite-dimensional and distributed nonlinear systems, including numerous systems directly connected with important technological problems.
Download or read book Investigation and Optimisation of Kinetic Energy Harvesters with Nonlinear Electromechanical Coupling Mechanisms written by Andrii Sokolov and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electromechanical Coupling Theory Methodology and Applications for High Performance Microwave Equipment written by Baoyan Duan and published by John Wiley & Sons. This book was released on 2022-11-15 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromechanical Coupling Theory, Methodology and Applications for High-Performance Microwave Equipment Electromechanical Coupling Theory, Methodology, and Applications for High-Performance Microwave Equipment is an authoritative and up-to-date guide to the structural, mechanical, and electrical aspects of electromechanical coupling. Addressing control, electromagnetism, and structural engineering, this comprehensive reference covers the electromechanical coupling of high-performance microwave electronic equipment (MEE), such as antennas, radar, large radio telescopes, and telecommunication and navigation equipment. The book is divided into four main sections, beginning with an introduction to electromechanical coupling (EMC) theory and a detailed description of the multi-field coupling model (MFCM) and the influence mechanism (IM) of nonlinear factors of antenna-servo-feeder systems on performance. Subsequent sections discuss MFCM- and IM-based design methodology, EMC-based measurement and testing, computer software for coupling analysis and design of electronic equipment, and various engineering applications of EMC theory and the IM of typical electronic equipment. In addition, the book: Discusses information and data transfer in electromagnetic fields, mechanical and structural deformation fields, and temperature fields Explains how high-performance microwave electronic equipment differs from traditional mechanical equipment Addresses EMC-based and general design-vector based optimization of electronic equipment design Describes applications such as a gun-guided radar system for warships and a large-diameter antenna for moon exploration Includes evaluation criteria to validate MFCM/IM design theory and methodology Electromechanical Coupling Theory, Methodology, and Applications for High-Performance Microwave Equipment is essential reading for circuit designers, microwave engineers, researchers working with high-frequency microwave engineering, and engineers working with integrated circuits in radar, communications, IoT, antenna engineering, and remote sensing.
Download or read book American Society of Composites 28th Technical Conference written by Charles Bakis and published by DEStech Publications, Inc. This book was released on 2013-11-01 with total page 1892 pages. Available in PDF, EPUB and Kindle. Book excerpt: New and unpublished U.S. and international research on multifunctional, active, biobased, SHM, self-healing composites -- from nanolevel to large structures New information on modeling, design, computational engineering, manufacturing, testing Applications to aircraft, bridges, concrete, medicine, body armor, wind energy This fully searchable CD-ROM contains 135 original research papers on all phases of composite materials. The document provides cutting edge research by US, Canadian, and Japanese authorities on matrix-based and fiber composites from design to damage analysis and detection. Major divisions of the work include: Structural Health Monitoring, Multifunctional Composites, Integrated Computational Materials Engineering, Interlaminar Testing, Analysis-Shell Structures, Thermoplastic Matrices, Analysis Non-classical Laminates, Bio-Based Composites, Electrical Properties, Dynamic Behavior, Damage/Failure, Compression-Testing, Active Composites, 3D Reinforcement, Dielectric Nanocomposites, Micromechanical Analysis, Processing, CM Reinforcement for Concrete, Environmental Effects, Phase-Transforming, Molecular Modeling, Impact.
Download or read book Control Of Imperfect Nonlinear Electromechanical Large Scale Systems From Dynamics To Hardware Implementation written by Frasca Mattia and published by World Scientific. This book was released on 2017-05-19 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on a class of uncertain systems that are called imperfect, and shows how much systems can regularly work if an appropriate control strategy is adopted. Along with some practical well studied examples, a formalization of the models for imperfect system is considered and a control strategy is proposed. Experimental case studies on electromechanical systems are also included. New concepts, experimental innovative circuits and laboratory details allow the reader to implement at low cost the outlined strategy. Emergent topics in nonlinear device realization are emphasized with the aim to allow researchers and students to perform experiments with large scale electromechanical systems. Moreover, the possibility of using imperfections and noise to generate nonlinear strange behavior is discussed.
Download or read book Nonlinear Wave Dynamics written by J. Engelbrecht and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the end of the twentieth century, nonlinear dynamics turned out to be one of the most challenging and stimulating ideas. Notions like bifurcations, attractors, chaos, fractals, etc. have proved to be useful in explaining the world around us, be it natural or artificial. However, much of our everyday understanding is still based on linearity, i. e. on the additivity and the proportionality. The larger the excitation, the larger the response-this seems to be carved in a stone tablet. The real world is not always reacting this way and the additivity is simply lost. The most convenient way to describe such a phenomenon is to use a mathematical term-nonlinearity. The importance of this notion, i. e. the importance of being nonlinear is nowadays more and more accepted not only by the scientific community but also globally. The recent success of nonlinear dynamics is heavily biased towards temporal characterization widely using nonlinear ordinary differential equations. Nonlinear spatio-temporal processes, i. e. nonlinear waves are seemingly much more complicated because they are described by nonlinear partial differential equations. The richness of the world may lead in this case to coherent structures like solitons, kinks, breathers, etc. which have been studied in detail. Their chaotic counterparts, however, are not so explicitly analysed yet. The wavebearing physical systems cover a wide range of phenomena involving physics, solid mechanics, hydrodynamics, biological structures, chemistry, etc.
Download or read book Nonlinear Theory of Electroelastic and Magnetoelastic Interactions written by Luis Dorfmann and published by Springer Science & Business Media. This book was released on 2014-02-06 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a unified theory on nonlinear electro-magnetomechanical interactions of soft materials capable of large elastic deformations. The authors include an overview of the basic principles of the classic theory of electromagnetism from the fundamental notions of point charges and magnetic dipoles through to distributions of charge and current in a non-deformable continuum, time-dependent electromagnetic fields and Maxwell’s equations. They summarize relevant theories of continuum mechanics, required to account for the deformability of material and present a constitutive framework for the nonlinear magneto-and electroelastic interactions in a highly deformable material. The equations contained in the book formulate and solve a variety of representative boundary-value problems for both nonlinear magnetoelasticity and electroelasticity.
Download or read book IUTAM IFToMM Symposium on Synthesis of Nonlinear Dynamical Systems written by E. Lavendelis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUT AM / IFToMM Symposium on Synthesis of Nonlinear Dynamical Systems, held in Riga, Latvia, 24-28 August 1998, was one of a series of IUTAM sponsored symposia which focus on the theory and application of methods of nonlinear dynamics in mechanics. The symposium follows eighteen symposia on Analysis and Synthesis of Nonlinear Mechanical Oscillatory Systems held at Riga Technical University from 1971 to 1991 and in 1996 (prof. E. Lavendelis and Prof. M. Zakrzhevsky). Early in the late fifties and sixties Prof. J. G. Panovko organised several successful conferences in Riga on Nonlinear Oscillations. The participants in all these conferences and symposia (except 1996) were only from the ex-Soviet Union. This symposium, organised by the Institute of Mechanics of Riga Technical University, brought together scientists active in different fields of nonlinear dynamics. Selected scientists from 14 countries represented a wide range of expertise in' mechanics, from pure theoreticians to people primarily oriented towards application of nonlinear and chaotic dynamics and nonlinear oscillations. The goal of the symposium was to stimulate development of the theory of strongly nonlinear dynamical systems and its new applications in the fields of applied mechanics, engineering and other branches of science and technology.
Download or read book Continuum Mechanics Volume III written by José Merodio and published by EOLSS Publications. This book was released on 2011-11-30 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of continuum mechanics is to predict the response of a body that is under the action of external and/or internal influences, i.e. to capture and describe different mechanisms associated with the motion of a body that is under the action of loading. A body in continuum mechanics is considered to be matter continuously distributed in space. Hence, no attention is given to the microscopic (atomic) structure of real materials although non-classical generalized theories of continuum mechanics are able to deal with the mesoscopic structure of matter (i.e. defects, cracks, dispersive lengths, ...). Matter occupies space in time and the response of a body in continuum mechanics is restricted to the Newtonian space-time of classical mechanics in this volume. Einstein’s theory of relativity is not considered. In the classical sense, loading is considered as any action that changes the motion of the body. This includes, for instance, a change in temperature or a force applied. By introducing the concept of configurational forces a load may also be considered as a force that drives a change in the material space, for example the opening of a crack. Continuum mechanics refers to field descriptions of phenomena that are usually modeled by partial differential equations and, from a mathematical point of view, require non-standard knowledge of non-simple technicalities. One purpose in this volume has been to present the different subjects in a self-contained way for a general audience. The organization of the volume is as follows. Mathematically, to predict the response of a body it is necessary to formulate boundary value problems governed by balance laws. The theme of the volume, that is an overview of the subject, has been written with this idea in mind for beginners in the topic. Chapter 1 is an introduction to continuum mechanics based on a one-dimensional framework in which, simultaneously, a more detailed organization of the chapters of this volume is given. A one-dimensional approach to continuum mechanics in some aspects maybe misleading since the analysis is oversimplified. Nevertheless, it allows us to introduce the subject through the early basic steps of the continuum analysis for a general audience. Chapters 3, 4 and 5 are devoted to the mathematical setting of continuum analysis: kinematics, balance laws and thermodynamics, respectively. Chapters 6 and 7 are devoted to constitutive equations. Chapters 8 and 9 deal with different issues in the context of linear elastostatics and linear elastodynamics and waves, respectively, for solids. Linear Elasticity is a classical and central theory of continuum mechanics. Chapter 10 deals with fluids while chapter 11 analyzes the coupled theory of thermoelasticity. Chapter 12 deals with nonlinear elasticity and its role in the continuum framework. Chapters 13 and 14 are dedicated to different applications of solid and fluid mechanics, respectively. The rest of the chapters involve some advanced topics. Chapter 15 is dedicated to turbulence, one of the main challenges in fluid mechanics. Chapter 16 deals with electro-magneto active materials (a coupled theory). Chapter 17 deals with specific ideas of soft matter and chapter 18 deals with configurational forces. In chapter 19, constitutive equations are introduced in a general (implicit) form. Well-posedness (existence, time of existence, uniqueness, continuity) of the equations of the mechanics of continua is an important topic which involves sophisticated mathematical machinery. Chapter 20 presents different analyses related to these topics. Continuum Mechanics is an interdisciplinary subject that attracts the attention of engineers, mathematicians, physicists, etc., working in many different disciplines from a purely scientific environment to industrial applications including biology, materials science, engineering, and many other subjects.
Download or read book Nanocantilever Beams written by Ioana Voiculescu and published by CRC Press. This book was released on 2015-12-23 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the fabrication and applications of cantilever beams with nanoscale dimensions. Nanometer-size mechanical structures show exceptional properties generated by their reduced dimensions. These properties enable new sensing concepts and transduction mechanisms that will allow the enhancement of the performance of devices to their f
Download or read book Transducers and Arrays for Underwater Sound written by Charles Sherman and published by Springer Science & Business Media. This book was released on 2007-01-05 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most comprehensive book on electroacoustic transducers and arrays for underwater sound Includes transducer modeling techniques and transducer designs that are currently in use Includes discussion and analysis of array interaction and nonlinear effects in transducers Contains extensive data in figures and tables needed in transducer and array design Written at a level that will be useful to students as well as to practicing engineers and scientists
Download or read book Generalized Models and Non classical Approaches in Complex Materials 1 written by Holm Altenbach and published by Springer. This book was released on 2018-03-24 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first of 2 special volumes dedicated to the memory of Gérard Maugin. Including 40 papers that reflect his vast field of scientific activity, the contributions discuss non-standard methods (generalized model) to demonstrate the wide range of subjects that were covered by this exceptional scientific leader. The topics range from micromechanical basics to engineering applications, focusing on new models and applications of well-known models to new problems. They include micro–macro aspects, computational endeavors, options for identifying constitutive equations, and old problems with incorrect or non-satisfying solutions based on the classical continua assumptions.
