Download or read book Nonlinear Crack Models for Nonmetallic Materials written by Alberto Carpinteri and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this volume a survey of the most relevant nonlinear crack models is provided, with the purpose of analyzing the nonlinear mechanical effects occurring at the tip of macrocracks in quasi-brittle materials - such as concrete, rocks, ceramics, polymers, high-strength metallic alloys - and in brittle-matrix fibre-reinforced composites. Such local effects, as, for example, plastic deformation, yielding, strain-hardening, strain-softening, mechanical damage, matrix microcracking, aggregate debonding, fibre bridging, fibre slippage, crazing, and so on, are properly described through different simplified models, representing the peculiarities of the phenomena involved. The models are introduced and described separately and then compared in the last part of the book. This volume will be of interest to students, professionals and researchers in the field of nonlinear fracture mechanics.
Download or read book IUTAM Symposium on Field Analyses for Determination of Material Parameters Experimental and Numerical Aspects written by P. Ståhle and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the IUTAM Symposium held in Abisko National Park, Kiruna, Sweden, July 31-August 4, 2000
Download or read book IUTAM Symposium on Size Effects on Material and Structural Behavior at Micron and Nano Scales written by Q. P. Sun and published by Springer Science & Business Media. This book was released on 2006-09-19 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a collection of twenty five written contributions by distinguished invited speakers from seven countries to the IUTAM Symposium on Size Effects on Material and Structural Behavior at Micron- and Nano-scales. Size effects on material and structural behaviors are of great interest to physicists, material scientists, and engineers who need to understand and model the mechanical behavior of solids especially at micron- and nano-scales.
Download or read book Delamination Behaviour of Composites written by Srinivasan Sridharan and published by Elsevier. This book was released on 2008-10-21 with total page 787 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such advantages as low weight compared to strength and toughness, laminated composites are now used in a wide range of applications. Their increasing use has underlined the need to understand their principal mode of failure, delamination. This important book reviews key research in understanding and preventing delamination. The first part of the book reviews general issues such as the role of fracture mechanics in understanding delamination, design issues and ways of testing delamination resistance. Part two describes techniques for detecting and characterising delamination such as piezoelectric sensors, the use of lamb waves and acoustic emission techniques. The next two sections of the book discuss ways of studying and modelling delamination behaviour. The final part of the book reviews research on delamination behaviour in particular conditions such as shell and sandwich structures, z-pin bridging and resin bonding. With its distinguished editor and international team of contributors, Delamination behaviour of composites is a standard reference for all those researching laminated composites and using them in such diverse applications as microelectronics, aerospace, marine, automotive and civil engineering. Reviews the role of fracture mechanics in understanding delamination, design issues and ways of testing delamination resistance Discuss ways of studying and modelling delamination behaviour A standard reference for all those researching laminated composites
Download or read book Atti del XVII Convegno Nazionale del Gruppo Italiano Frattura written by and published by Gruppo Italiano Frattura. This book was released on with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Self Consistent Methods for Composites written by S.K. Kanaun and published by Springer Science & Business Media. This book was released on 2008-05-20 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book is dedicated to the application of self-consistent methods to the solution of static and dynamic problems of the mechanics and physics of composite materials. The effective elastic, electric, dielectric, thermo-conductive and other properties of composite materials reinforced by ellipsoidal, spherical multi-layered inclusions, thin hard and soft inclusions, short fibers and unidirected multi-layered fibers are considered. The book contains many concrete results.
Download or read book Reanalysis of Structures written by Uri Kirsch and published by Springer Science & Business Media. This book was released on 2008-02-24 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with various computational procedures for multiple repeated analyses (reanalysis) of structures, and presents them in a unified approach. It meets the need for a general text covering the basic concepts and methods as well as recent developments in this area. To clarify the presentation, many illustrative examples and numerical results are demonstrated. Previous books on structural analysis do not cover most of the material presented here.
Download or read book IUTAM Symposium on Theoretical and Numerical Methods in Continuum Mechanics of Porous Materials written by Wolfgang Ehlers and published by Springer Science & Business Media. This book was released on 2001-01-31 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last decades, continuum mechanics of porous materials has achieved great attention, since it allows for the consideration of the volumetrically coupled behaviour of the solid matrix deformation and the pore-fluid flow. Naturally, applications of porous media models range from civil and environmental engineering, where, e. g. , geote- nical problems like the consolidation problem are of great interest, via mechanical engineering, where, e. g. , the description of sinter materials or polymeric and metallic foams is a typical problem, to chemical and biomechanical engineering, where, e. g. , the complex structure of l- ing tissues is studied. Although these applications are principally very different, they basically fall into the category of multiphase materials, which can be described, on the macroscale, within the framework of the well-founded Theory of Porous Media (TPM). With the increasing power of computer hardware together with the rapidly decreasing computational costs, numerical solutions of complex coupled problems became possible and have been seriously investigated. However, since the quality of the numerical solutions strongly depends on the quality of the underlying physical model together with the experimental and mathematical possibilities to successfully determine realistic material parameters, a successful treatment of porous materials requires a joint consideration of continuum mechanics, experimental mechanics and numerical methods. In addition, micromechanical - vestigations and homogenization techniques are very helpful to increase the phenomenological understanding of such media.
Download or read book Direct Methods for Solving the Boltzmann Equation and Study of Nonequilibrium Flows written by V.V. Aristov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with the methods of solving the nonlinear Boltz mann equation and of investigating its possibilities for describing some aerodynamic and physical problems. This monograph is a sequel to the book 'Numerical direct solutions of the kinetic Boltzmann equation' (in Russian) which was written with F. G. Tcheremissine and published by the Computing Center of the Russian Academy of Sciences some years ago. The main purposes of these two books are almost similar, namely, the study of nonequilibrium gas flows on the basis of direct integration of the kinetic equations. Nevertheless, there are some new aspects in the way this topic is treated in the present monograph. In particular, attention is paid to the advantages of the Boltzmann equation as a tool for considering nonequi librium, nonlinear processes. New fields of application of the Boltzmann equation are also described. Solutions of some problems are obtained with higher accuracy. Numerical procedures, such as parallel computing, are in vestigated for the first time. The structure and the contents of the present book have some com mon features with the monograph mentioned above, although there are new issues concerning the mathematical apparatus developed so that the Boltzmann equation can be applied for new physical problems. Because of this some chapters have been rewritten and checked again and some new chapters have been added.
Download or read book IUTAM Symposium on Evolutionary Methods in Mechanics written by Tadeusz Burczynski and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the IUTAM Symposium held in Cracow, Poland, 24-27 September 2002
Download or read book Variational and Quasi Variational Inequalities in Mechanics written by Alexander S. Kravchuk and published by Springer Science & Business Media. This book was released on 2007-09-04 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential aim of this book is to consider a wide set of problems arising in the mathematical modeling of mechanical systems under unilateral constraints. In these investigations elastic and non-elastic deformations, friction and adhesion phenomena are taken into account. All the necessary mathematical tools are given: local boundary value problem formulations, construction of variational equations and inequalities and their transition to minimization problems, existence and uniqueness theorems, and variational transformations (Friedrichs and Young-Fenchel-Moreau) to dual and saddle-point search problems.
Download or read book Functional Analysis written by Leonid P. Lebedev and published by Springer Science & Business Media. This book was released on 2006-04-29 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book started its life as a series of lectures given by the second author from the 1970’s onwards to students in their third and fourth years in the Department of Mechanics and Mathematics at Rostov State University. For these lectures there was also an audience of engineers and applied mechanicists who wished to understand the functional analysis used in contemporary research in their fields. These people were not so much interested in functional analysis itself as in its applications; they did not want to be told about functional analysis in its most abstract form, but wanted a guided tour through those parts of the analysis needed for their applications. The lecture notes evolved over the years as the first author started to make more formal typewritten versions incorporating new material. About 1990 the first author prepared an English version and submitted it to Kluwer Academic Publishers for inclusion in the series Solid Mechanics and its Applications. At that state the notes were divided into three long chapters covering linear and nonlinear analysis. As Series Editor, the third author started to edit them. The requirements of lecture notes and books are vastly different. A book has to be complete (in some sense), self contained, and able to be read without the help of an instructor.
Download or read book Elasticity written by J.R. Barber and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first edition of this book was published, there have been major improve- TM TM ments in symbolic mathematical languages such as Maple and Mathematica and this has opened up the possibility of solving considerably more complex and hence interesting and realistic elasticity problems as classroomexamples. It also enables the student to focus on the formulation of the problem (e. g. the appropriate governing equations and boundary conditions) rather than on the algebraic manipulations, with a consequent improvement in insight into the subject and in motivation. During the past 10 years I have developed files in Maple and Mathematica to facilitate this p- cess, notably electronic versions of the Tables in the present Chapters 19 and 20 and of the recurrence relations for generating spherical harmonics. One purpose of this new edition is to make this electronic material available to the reader through the Kluwer website www. elasticity. org. I hope that readers will make use of this resource and report back to me any aspects of the electronic material that could benefit from improvement or extension. Some hints about the use of this material are contained in Appendix A. Those who have never used Maple or Mathematica will find that it takes only a few hours of trial and error to learn how to write programs to solve boundary value problems in elasticity.
Download or read book IUTAM Symposium on Multiscale Modelling of Damage and Fracture Processes in Composite Materials written by Tomasz Sadowski and published by Springer Science & Business Media. This book was released on 2006-07-06 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating macroscopic properties with observations at lower levels, this book details advances in multiscale modelling and analysis pertaining to classes of composites which either have a wider range of relevant microstructural scales, such as metals, or do not have a very well-defined microstructure, e.g. cementitious or ceramic composites. The IUTAM symposia proceedings provide a platform for extensive further discussion and research.
Download or read book Structural Synthesis of Parallel Robots written by Grigore Gogu and published by Springer Science & Business Media. This book was released on 2009-05-01 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book of robotics presenting solutions of uncoupled and fully-isotropic parallel robotic manipulators and a method for their structural synthesis. Part 1 presents the methodology proposed for structural synthesis. Part 2 presents the various topologies of parallel robots generated by this systematic approach. Many solutions are presented here for the first time. The book will contribute to a widespread implementation of these solutions in industrial products.
Download or read book Boundary Integral Equations in Elasticity Theory written by A.M. Linkov and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: by the author to the English edition The book aims to present a powerful new tool of computational mechanics, complex variable boundary integral equations (CV-BIE). The book is conceived as a continuation of the classical monograph by N. I. Muskhelishvili into the computer era. Two years have passed since the Russian edition of the present book. We have seen growing interest in numerical simulation of media with internal structure, and have evidence of the potential of the new methods. The evidence was especially clear in problems relating to multiple grains, blocks, cracks, inclusions and voids. This prompted me, when preparing the English edition, to place more emphasis on such topics. The other change was inspired by Professor Graham Gladwell. It was he who urged me to abridge the chain of formulae and to increase the number of examples. Now the reader will find more examples showing the potential and advantages of the analysis. The first chapter of the book contains a simple exposition of the theory of real variable potentials, including the hypersingular potential and the hypersingular equations. This makes up for the absence of such exposition in current textbooks, and reveals important links between the real variable BIE and the complex variable counterparts. The chapter may also help readers who are learning or lecturing on the boundary element method.
Download or read book Optimal Control from Theory to Computer Programs written by Viorel Arnăutu and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to present the mathematical theory and the know-how to make computer programs for the numerical approximation of Optimal Control of PDE's. The computer programs are presented in a straightforward generic language. As a consequence they are well structured, clearly explained and can be translated easily into any high level programming language. Applications and corresponding numerical tests are also given and discussed. To our knowledge, this is the first book to put together mathematics and computer programs for Optimal Control in order to bridge the gap between mathematical abstract algorithms and concrete numerical ones. The text is addressed to students and graduates in Mathematics, Mechanics, Applied Mathematics, Numerical Software, Information Technology and Engineering. It can also be used for Master and Ph.D. programs.
