Download or read book Heat Transfer 1994 written by G. F. Hewitt and published by CRC Press. This book was released on 1994 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Convective Heat Transfer written by I. Pop and published by Elsevier. This book was released on 2001-02-23 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in studying the phenomena of convective heat and mass transfer between an ambient fluid and a body which is immersed in it stems both from fundamental considerations, such as the development of better insights into the nature of the underlying physical processes which take place, and from practical considerations, such as the fact that these idealised configurations serve as a launching pad formodelling the analogous transfer processes in more realistic physical systems. Such idealised geometries also provide a test ground for checking the validity of theoreticalanalyses. Consequently, an immense research effort has been expended in exploring and understanding the convective heat and mass transfer processes between a fluid and submerged objects of various shapes. Among several geometries which have received considerable attention are plates, circular and elliptical cylinders, and spheres, although much information is also available for some other bodies, such ascorrugated surfaces or bodies of relatively complicated shapes. The book is a unified progress report which captures the spirit of the work in progress in boundary-layer heat transfer research and also identifies potential difficulties and areas for further study. In addition, this work provides new material on convective heat and mass transfer, as well as a fresh look at basic methods in heat transfer. Extensive references are included in order to stimulate further studies of the problems considered. A state-of-the-art picture of boundary-layer heat transfer today is presented by listing and commenting also upon the most recent successful efforts and identifying the needs for further research.

Download or read book Handbook of Numerical Heat Transfer written by W. J. Minkowycz and published by Wiley. This book was released on 2006-03-24 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A completely updated edition of the acclaimed single-volume reference for heat transfer and the thermal sciences This Second Edition of Handbook of Numerical Heat Transfer covers the basic equations for numerical method calculations regarding heat transfer problems and applies these to problems encountered in aerospace, nuclear power, chemical processes, electronic packaging, and other related areas of mechanical engineering. As with the first edition, this complete revision presents comprehensive but accessible coverage of the necessary formulations, numerical schemes, and innovative solution techniques for solving problems of heat and mass transfer and related fluid flows. Featuring contributions from some of the most prominent authorities in the field, articles are grouped by major sets of methods and functions, with the text describing new and improved, as well as standard, procedures. Handbook of Numerical Heat Transfer, Second Edition includes: * Updated coverage of parabolic systems, hyperbolic systems, integral-and integro-differential systems, Monte Carlo and perturbation methods, and inverse problems * Usable computer programs that allow quick applications to aerospace, chemical, nuclear, and electronic packaging industries * User-friendly nomenclature listings include all the symbols used in each chapter so that chapter-specific symbols are readily available

Download or read book Convection in Porous Media written by D.A. Nield and published by Springer Science & Business Media. This book was released on 2006-02-23 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonprofit organizations are suffering from the continuing economic downturn. Donations are decreasing while demand for services is growing, forcing these organizations to be increasingly efficient and effective with their funds. This book introduces the reader to the basic concepts of project management. It provides approaches and templates to help nonprofit managers quickly implement practices to help them manage their limited resources, both financial and volunteer. The book also provides a tool to help the project team determine which practices are most appropriate. The book explores how social media and other technology tools can be used to assist in the management of time-sensitive projects and shows how project portfolio management can be a tool to assist in communications with boards of directors and other governing entities. The project portfolio is a tool that development office managers can easily implement and adopt to facilitate resource assignment. Finally, the book offers three case studies of nonprofit projects that went awry and shows how project management would have assisted.

Download or read book Convection in Porous Media written by Donald A. Nield and published by Springer Science & Business Media. This book was released on 2012-11-30 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: Convection in Porous Media, 4th Edition, provides a user-friendly introduction to the subject, covering a wide range of topics, such as fibrous insulation, geological strata, and catalytic reactors. The presentation is self-contained, requiring only routine mathematics and the basic elements of fluid mechanics and heat transfer. The book will be of use not only to researchers and practicing engineers as a review and reference, but also to graduate students and others entering the field. The new edition features approximately 1,750 new references and covers current research in nanofluids, cellular porous materials, strong heterogeneity, pulsating flow, and more.

Download or read book Free Convective Heat Transfer written by Oleg G. Martynenko and published by Springer Science & Business Media. This book was released on 2005-12-06 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Free Convective Heat Transfer is a thorough survey of various kinds of free-convective flows and heat transfer. Reference data are accompanied by a large number of photographs originating from different optical visualization methods illustrating the different types of flow. The formulas derived from numerical and analytical investigations are valuable tools for engineering calculations. They are written in their most compact and general form in order to allow for an extensive range of different variants of boundary and initial conditions, which, in turn, leads to a wide applicability to different flow types. Some specific engineering problems are solved in the book as exemplary applications of these formulas.

Download or read book Buoyancy induced Flows and Transport written by Benjamin Gebhart and published by CRC Press. This book was released on 1988 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1974 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Transfer to Non Newtonian Fluids written by Aroon Shenoy and published by John Wiley & Sons. This book was released on 2018-03-12 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written with the idea of providing the fundamentals for those who are interested in the field of heat transfer to non-Newtonian fluids. It is well recognized that non-Newtonian fluids are encountered in a number of transport processes and estimation of the heat transfer characteristics in the presence of these fluids requires analysis of equations that are far more complex than those encountered for Newtonian fluids. A deliberate effort has been made to demonstrate the methods of simplification of the complex equations and to put forth analytical expressions for the various heat transfer situations in as vivid a manner as possible. The book covers a broad range of topics from forced, natural and mixed convection without and with porous media. Laminar as well as turbulent flow heat transfer to non-Newtonian fluids have been treated and the criterion for transition from laminar to turbulent flow for natural convection has been established. The heat transfer characteristics of non-Newtonian fluids from inelastic power-law fluids to viscoelastic second-order fluids and mildly elastic drag reducing fluids are covered. This book can serve the needs of undergraduates, graduates and industry personnel from the fields of chemical engineering, material science and engineering, mechanical engineering and polymer engineering.

Download or read book Physical and Computational Aspects of Convective Heat Transfer written by T. Cebeci and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is concerned with the transport of thermal energy in flows of practical significance. The temperature distributions which result from convective heat transfer, in contrast to those associated with radiation heat transfer and conduction in solids, are related to velocity characteristics and we have included sufficient information of momentum transfer to make the book self-contained. This is readily achieved because of the close relation ship between the equations which represent conservation of momentum and energy: it is very desirable since convective heat transfer involves flows with large temperature differences, where the equations are coupled through an equation of state, as well as flows with small temperature differences where the energy equation is dependent on the momentum equation but the momentum equation is assumed independent of the energy equation. The equations which represent the conservation of scalar properties, including thermal energy, species concentration and particle number density can be identical in form and solutions obtained in terms of one dependent variable can represent those of another. Thus, although the discussion and arguments of this book are expressed in terms of heat transfer, they are relevant to problems of mass and particle transport. Care is required, however, in making use of these analogies since, for example, identical boundary conditions are not usually achieved in practice and mass transfer can involve more than one dependent variable.

Download or read book Micropolar Fluids written by Grzegorz Lukaszewicz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micropolar fluids are fluids with microstructure. They belong to a class of fluids with nonsymmetric stress tensor that we shall call polar fluids, and include, as a special case, the well-established Navier-Stokes model of classical fluids that we shall call ordinary fluids. Physically, micropolar fluids may represent fluids consisting of rigid, randomly oriented (or spherical) particles suspended in a viscous medium, where the deformation of fluid particles is ignored. The model of micropolar fluids introduced in [65] by C. A. Eringen is worth studying as a very well balanced one. First, it is a well-founded and significant generalization of the classical Navier-Stokes model, covering, both in theory and applications, many more phenomena than the classical one. Moreover, it is elegant and not too complicated, in other words, man ageable to both mathematicians who study its theory and physicists and engineers who apply it. The main aim of this book is to present the theory of micropolar fluids, in particular its mathematical theory, to a wide range of readers. The book also presents two applications of micropolar fluids, one in the theory of lubrication and the other in the theory of porous media, as well as several exact solutions of particular problems and a numerical method. We took pains to make the presentation both clear and uniform.

Download or read book Laminar Flow Analysis written by David F. Rogers and published by Cambridge University Press. This book was released on 1992-10-30 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major thrust of this book is to present a technique of analysis that aids the formulation, understanding, and solution of problems of viscous flow. The intent is to avoid providing a "canned" program to solve a problem, offering instead a way to recognize the underlying physical, mathematical, and modeling concepts inherent in the solutions. The reader must first choose a mathematical model and derive governing equations based on realistic assumptions, or become aware of the limitations and assumptions associated with existing models. An appropriate solution technique is then selected. The solution technique may be either analytical or numerical. Computer-aided analysis algorithms supplement the classical analyses. The book begins by deriving the Navier-Stokes equation for a viscous compressible variable property fluid. The second chapter considers exact solutions of the incompressible hydrodynamic boundary layer equations solved with and without mass transfer at the wall. Forced convection, free convection, and the compressible laminar boundary layer are discussed in the remaining chapters. The text unifies the various topics by tracing a logical progression from simple to complex governing differential equations and boundary conditions. Numerical, parametric, and directed analysis problems are included at the end of each chapter.

Download or read book Modern Aspects of Electrochemistry No 6 written by J. O'M. Bockris and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the evolution of electrochemistry away from concern with the physical chemistry of solutions to its more fruitful goal in the study of the widespread consequences of the transfer of electric charges across interphases has come to fruition. The turning of technology away from an onward rush, regardless, to progress which takes into account repercussions of techno logical activity on the environment, and the consequent need for a reduction and then termination of the injection of CO into 2 the atmosphere (greenhouse effect), together with a reckoning with air and water pollution in general, ensures a long-term need for advances in a basic knowledge of electrochemical systems, an increased technological use of which seems to arise from the environmental necessities. But a mighty change in attitude needs to spread among electro chemists (indeed, among all surface chemists) concerning the terms and level in which their field is discussed. The treatment of charge transfer reactions has often been made too vaguely, in terms, it seemed, of atom transfer, with the electron-transfer step, the essence of electrochemistry, an implied accompaniment to the transfer of ions across electrical double layers. The treatment has been in terms of classical mechanics, only tenable while inadequate questions were asked concerning the behavior of the electron in the interfacial transfer. No process demands a more exclusively quantal discussion than does electron transfer.

Download or read book A Method for Predicting Thermal Response in Sandwich Panels written by P. J. Kendall and published by . This book was released on 1963 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study was undertaken to develop and demonstrate the validity of an analytical model for predicting the transient temperature response in honeycomb sandwich panels subjected to variable heat loads on one or both faces. A one-dimensional analysis was developed which employs the ordinary heat balance considering heat transfer through the panel by conduction, convection, and radiation. The finite (forward) difference technique is employed for solving the heat balance equations. Honeycomb panels of various materials, cell shapes, and dimensions were subjected to a variety of heat loads and their thermal responses were recorded. The predicted thermal responses for these panels, obtained with the analytical model, were in good agreement with the test data. (Author).

Download or read book Data Science in Engineering and Management written by Zdzislaw Polkowski and published by CRC Press. This book was released on 2021-12-31 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings insight into data science and offers applications and implementation strategies. It includes current developments and future directions and covers the concept of data science along with its origins. It focuses on the mechanisms of extracting data along with classifications, architectural concepts, and business intelligence with predictive analysis. Data Science in Engineering and Management: Applications, New Developments, and Future Trends introduces the concept of data science, its use, and its origins, as well as presenting recent trends, highlighting future developments; discussing problems and offering solutions. It provides an overview of applications on data linked to engineering and management perspectives and also covers how data scientists, analysts, and program managers who are interested in productivity and improving their business can do so by incorporating a data science workflow effectively. This book is useful to researchers involved in data science and can be a reference for future research. It is also suitable as supporting material for undergraduate and graduate-level courses in related engineering disciplines.

Download or read book Heat Transfer Handbook written by Adrian Bejan and published by John Wiley & Sons. This book was released on 2003-06-30 with total page 1496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chapters contributed by thirty world-renown experts. * Covers all aspects of heat transfer, including micro-scale and heat transfer in electronic equipment. * An associated Web site offers computer formulations on thermophysical properties that provide the most up-to-date values.

Download or read book Bubbles Drops and Particles in Non Newtonian Fluids written by R.P. Chhabra and published by CRC Press. This book was released on 2006-07-25 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bubbles, Drops, and Particles in Non-Newtonian Fluids, Second Edition continues to provide thorough coverage of the scientific foundations and the latest advances in particle motion in non-Newtonian media. The book demonstrates how dynamic behavior of single particles can yield useful information for modeling transport processes in complex multipha