Download or read book Nondestructive Evaluation of Metal Matrix Composites written by S. W. Schramm and published by . This book was released on 1985 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this program was to apply nondestructive evaluation (NDE) methods to identify potentially harmful casting defects in FP/magnesium composites; establish detectability and reproducibility limits of NDE applied to FP/magnesium composites; and establish relationships between casting defects and failure modes of FP/magnesium composites. The material investigated was ZE41A magnesium alloy reinforced with FP (aluminum oxide) fibers. The 27 coupons (four coupons each of five flaw types and seven coupons from a related program were evaluated using ultrasonic scanning, wave propagation velocity, and wave attenuation inspection techniques. The coupons evaluated were 12.7 cm (5 in.) long x 3.8 cm (1.5 in.) wide x 0.6 cm (0.25 in.) thick, with a fiber volume fraction of 0.50. After the detectability and reproducibility NDE inspections, tensile and/or bend specimens were machined from the parent coupons, strain gaged, and statically loaded to failure. Micrographs were made of the fracture surfaces for comparison with the NDE records. It was found that ultrasonic scanning using a 20 MHz compression wave, focused transducer operated in the pulse-echo mode generating an analog C-scan provided 100% detectability and reproducibility of the intentionally flawed coupons. Keywords: Metal matrix composites; Nondestructive testing; Nondestructive testing; Magnesium; Fiber reinforced composites; Castings; and Aluminum oxides.
Download or read book Nondestructive Evaluation of a Metal Matrix Composite written by William S. de Rosset and published by . This book was released on 2003 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nondestructive Evaluation Applied to Process Control of Composite Fabrication written by Gary W. Carriveau and published by . This book was released on 1994 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nondestructive Evaluation of a Metal Matrix Composite written by and published by . This book was released on 2003 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: Samples of aluminum metal matrix composites (AlMMCs) have been examined with nondestructive evaluation techniques. A literature search identified ultrasonic C-scans as one of the most promising techniques, and this approach was used along with an eddy-current based approach, Meandering Winding Magnetometer (MWM), that also had some potential usefulness for flaw detection. Samples with known flaws were first investigated to ascertain the sensitivity of the equipment. Subsequent tests were performed on samples obtained from the University of Delaware. The findings were that both ultrasonics and MWM could detect gross flaws (cracks, delaminations, lack of matrix infusion, etc.) but that more subtle defects such as fiber waviness could not be detected unequivocally. Since fiber volume content determines to a large extent the strength of that AlMMC, a quantitative relationship between fiber volume content and the sonic velocity was developed. It was also noted that as fiber volume content increased, the ultrasonic signal attenuation increased. High signal attenuation due to high fiber volume content in some of the earlier ultrasonic scans led to a misinterpretation of those scans that was subsequently corrected.
Download or read book Nondestructive Evaluation of Ceramic and Metal Matrix Composites for NASA s HITEMP and Enabling Propulsion Materials Programs written by and published by . This book was released on 1992 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nondestructive Evaluation of Damage in Metal Matrix Composite Materials written by David Allen Ulman and published by . This book was released on 1980 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nondestructive Evaluation of Damage in Metal Matrix Composites written by David A. Ulman and published by . This book was released on 1979 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: The basic objectives of this work were: to apply nondestructive evaluation techniques to metal matrix composites; to obtain base line data as to the ability of these techniques to locate, identify and quantify defects in these materials; to determine the effect of these defects on strength and stiffness; and to modify the techniques as required for application to specimens having geometries other than the flat tensile coupon. Several different nondestructive testing techniques have been considered for possible application to metal matrix composites. A description of these is given in the following pages. Some of these methods have been applied during the past year to Al/Fp fiber composites while others have been investigated in a preliminary fashion in order to determine potential problem areas that will need to be solved for proper application in the coming year.
Download or read book Nondestructive Evaluation of Metal Matrix Composites written by National Materials Advisory Board (U.S.). Committee on Nondestructive Evaluation of Metal Matrix Composites and published by National Academies. This book was released on 1983 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nondestructive Evaluation NDE and Material Properties IV written by Peter K. Liaw and published by Minerals, Metals, & Materials Society. This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of eight papers from a symposium held during the 1999 TMS Annual Meeting & Exhibition. Presentations develop and expand on the fundamental understanding of nondestructive evaluation signatures with microstructures and properties of structural materials, including advanced materials such as metal-matrix composites, polymer composites, ceramics, and aluminum-lithium alloys.
Download or read book Review of Progress in Quantitative Nondestructive Evaluation written by Donald O. Thompson and published by Springer Science & Business Media. This book was released on 1995 with total page 1286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nondestructive Evaluation of Ceramic and Metal Matrix Composites for NASA s HITEMP and Enabling Propulsion Materials Program written by Edward R. Generazio and published by . This book was released on 1992 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nondestructive Evaluation of Damage in SiC Al Metal Matrix Composite Using X ray Tomographic Microscopy written by Thomas M. Breunig and published by . This book was released on 1992 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cyclic Deformation Fracture and Nondestructive Evaluation of Advanced Materials written by Michael R. Mitchell and published by ASTM International. This book was released on 1994 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the initiation and growth of fatigue cracks and the fracture toughness of advanced materials such as silicon nitride, special alloys and steels, thermoplastics, and graphite-epoxy composites; and explains several non-destructive techniques to evaluate such materials for manufacturing defect
Download or read book Fatigue Damage Characterization of Titanium Metal Matrix Composites by Nondestructive Evaluation written by Kerry John Michaels and published by . This book was released on 1994 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nondestructive Evaluation and Material Properties III written by P. K. Liaw and published by Tms. This book was released on 1996 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume aims to develop a fundamental understanding in relating nondestructive evaluation (NDE) signatures with microstructures and materials properties of structural alloys, including advanced materials, such as metal-matrix, polymer-matrix and ceramic-matrix composites.
Download or read book Nondestructive Evaluation of Fiber FP Reinforced Metal Matrix Composites written by RL. Conner and published by . This book was released on 1988 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber FP is a continuous polycrystalline alumina fiber suited for reinforcement of metals, plastics, and ceramics. Fiber FP/metal composites are very attractive for weight and stiffness critical applications. In order for these materials to be accepted in the marketplace, quality control methods needed to be developed. In this study, we developed methods based on computed tomography (CT) and ultrasonic scanning to identify porosity, delamination, and other discontinuities in Fiber FP reinforced composites.
Download or read book Non destructive Evaluation of Elastic Property Degradation in Titanium Metal Matrix Composites During Fatigue Loading written by Jyh-Herng Shih and published by . This book was released on 1995 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: