Download or read book Non logic Devices in Logic Processes written by Yanjun Ma and published by Springer. This book was released on 2017-03-29 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows readers how to design semiconductor devices using the most common and lowest cost logic CMOS processes. Readers will benefit from the author’s extensive, industrial experience and the practical approach he describes for designing efficiently semiconductor devices that typically have to be implemented using specialized processes that are expensive, time-consuming, and low-yield. The author presents an integrated picture of semiconductor device physics and manufacturing techniques, as well as numerous practical examples of device designs that are tried and true.
Download or read book Infochemistry written by Konrad Szacilowski and published by John Wiley & Sons. This book was released on 2012-04-25 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infochemistry: Information Processing at the Nanoscale, defines a new field of science, and describes the processes, systems and devices at the interface between chemistry and information sciences. The book is devoted to the application of molecular species and nanostructures to advanced information processing. It includes the design and synthesis of suitable materials and nanostructures, their characterization, and finally applications of molecular species and nanostructures for information storage and processing purposes. Divided into twelve chapters; the first three chapters serve as an introduction to the basic concepts of digital information processing, its development, limitations and finally introduces some alternative concepts for prospective technologies. Chapters four and five discuss traditional low-dimensional metals and semiconductors and carbon nanostructures respectively, while further chapters discuss Photoelectrochemical photocurrent switching and related phenomena and self-organization and self-assembly. Chapters eight, nine and ten discuss information processing at the molecular level, and eleven describes information processing in natural systems. The book concludes with a discussion of the future prospects for the field. Further topics: Traditional electronic device development is rapidly approaching a limit, so molecular scale information processing is critical in order to meet increasing demand for high computational power Characterizes chemical systems not according to their chemical nature, but according to their role as prospective information technology elements Covers the application of molecular species and nanostructures as molecular scale logic gates, switches, memories, and complex computing devices This book will be of particular interest to researchers in nanoelectronics, organic electronics, optoelectronics, chemistry and materials science.
Download or read book Spintronics Handbook Second Edition Spin Transport and Magnetism written by Evgeny Y. Tsymbal and published by CRC Press. This book was released on 2019-06-26 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spintronics Handbook, Second Edition offers an update on the single most comprehensive survey of the two intertwined fields of spintronics and magnetism, covering the diverse array of materials and structures, including silicon, organic semiconductors, carbon nanotubes, graphene, and engineered nanostructures. It focuses on seminal pioneering work, together with the latest in cutting-edge advances, notably extended discussion of two-dimensional materials beyond graphene, topological insulators, skyrmions, and molecular spintronics. The main sections cover physical phenomena, spin-dependent tunneling, control of spin and magnetism in semiconductors, and spin-based applications. Features: Presents the most comprehensive reference text for the overlapping fields of spintronics (spin transport) and magnetism. Covers the full spectrum of materials and structures, from silicon and organic semiconductors to carbon nanotubes, graphene, and engineered nanostructures. Extends coverage of two-dimensional materials beyond graphene, including molybdenum disulfide and study of their spin relaxation mechanisms Includes new dedicated chapters on cutting-edge topics such as spin-orbit torques, topological insulators, half metals, complex oxide materials and skyrmions. Discusses important emerging areas of spintronics with superconductors, spin-wave spintronics, benchmarking of spintronics devices, and theory and experimental approaches to molecular spintronics. Evgeny Tsymbal's research is focused on computational materials science aiming at the understanding of fundamental properties of advanced ferromagnetic and ferroelectric nanostructures and materials relevant to nanoelectronics and spintronics. He is a George Holmes University Distinguished Professor at the Department of Physics and Astronomy of the University of Nebraska-Lincoln (UNL), Director of the UNL’s Materials Research Science and Engineering Center (MRSEC), and Director of the multi-institutional Center for NanoFerroic Devices (CNFD). Igor Žutić received his Ph.D. in theoretical physics at the University of Minnesota. His work spans a range of topics from high-temperature superconductors and ferromagnetism that can get stronger as the temperature is increased, to prediction of various spin-based devices. He is a recipient of 2006 National Science Foundation CAREER Award, 2005 National Research Council/American Society for Engineering Education Postdoctoral Research Award, and the National Research Council Fellowship (2003-2005). His research is supported by the National Science Foundation, the Office of Naval Research, the Department of Energy, and the Airforce Office of Scientific Research.
Download or read book Nanoelectronics and Information Technology written by Rainer Waser and published by John Wiley & Sons. This book was released on 2012-05-29 with total page 1041 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fachlich auf höchstem Niveau, visuell überzeugend und durchgängig farbig illustriert: Das ist die neue Auflage der praxisbewährten Einführung in spezialisierte elektronische Materialien und Bauelemente aus der Informationstechnologie. Über ein Drittel des Inhalts ist neu, alle anderen Beiträge wurden gründlich überarbeitet und aktualisiert.
Download or read book Official Gazette of the United States Patent and Trademark Office written by and published by . This book was released on 2002 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design for Embedded Image Processing on FPGAs written by Donald G. Bailey and published by John Wiley & Sons. This book was released on 2011-06-13 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr Donald Bailey starts with introductory material considering the problem of embedded image processing, and how some of the issues may be solved using parallel hardware solutions. Field programmable gate arrays (FPGAs) are introduced as a technology that provides flexible, fine-grained hardware that can readily exploit parallelism within many image processing algorithms. A brief review of FPGA programming languages provides the link between a software mindset normally associated with image processing algorithms, and the hardware mindset required for efficient utilization of a parallel hardware design. The design process for implementing an image processing algorithm on an FPGA is compared with that for a conventional software implementation, with the key differences highlighted. Particular attention is given to the techniques for mapping an algorithm onto an FPGA implementation, considering timing, memory bandwidth and resource constraints, and efficient hardware computational techniques. Extensive coverage is given of a range of low and intermediate level image processing operations, discussing efficient implementations and how these may vary according to the application. The techniques are illustrated with several example applications or case studies from projects or applications he has been involved with. Issues such as interfacing between the FPGA and peripheral devices are covered briefly, as is designing the system in such a way that it can be more readily debugged and tuned. Provides a bridge between algorithms and hardware Demonstrates how to avoid many of the potential pitfalls Offers practical recommendations and solutions Illustrates several real-world applications and case studies Allows those with software backgrounds to understand efficient hardware implementation Design for Embedded Image Processing on FPGAs is ideal for researchers and engineers in the vision or image processing industry, who are looking at smart sensors, machine vision, and robotic vision, as well as FPGA developers and application engineers. The book can also be used by graduate students studying imaging systems, computer engineering, digital design, circuit design, or computer science. It can also be used as supplementary text for courses in advanced digital design, algorithm and hardware implementation, and digital signal processing and applications. Companion website for the book: www.wiley.com/go/bailey/fpga
Download or read book Nanomagnetic and Spintronic Devices for Energy Efficient Memory and Computing written by Jayasimha Atulasimha and published by John Wiley & Sons. This book was released on 2016-03-07 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomagnetic and spintronic computing devices are strong contenders for future replacements of CMOS. This is an important and rapidly evolving area with the semiconductor industry investing significantly in the study of nanomagnetic phenomena and in developing strategies to pinpoint and regulate nanomagnetic reliably with a high degree of energy efficiency. This timely book explores the recent and on-going research into nanomagnetic-based technology. Key features: Detailed background material and comprehensive descriptions of the current state-of-the-art research on each topic. Focuses on direct applications to devices that have potential to replace CMOS devices for computing applications such as memory, logic and higher order information processing. Discusses spin-based devices where the spin degree of freedom of charge carriers are exploited for device operation and ultimately information processing. Describes magnet switching methodologies to minimize energy dissipation. Comprehensive bibliographies included for each chapter enabling readers to conduct further research in this field. Written by internationally recognized experts, this book provides an overview of a rapidly burgeoning field for electronic device engineers, field-based applied physicists, material scientists and nanotechnologists. Furthermore, its clear and concise form equips readers with the basic understanding required to comprehend the present stage of development and to be able to contribute to future development. Nanomagnetic and Spintronic Devices for Energy-Efficient Memory and Computing is also an indispensable resource for students and researchers interested in computer hardware, device physics and circuits design.
Download or read book Process Tomography written by M S Beck and published by Butterworth-Heinemann. This book was released on 2012-12-02 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by international experts in this field, the book describes the principles of, and presents case studies for, the wide range of tomographic imaging techniques that can be used in the process industries. It includes sufficient introductory material to this multi-disciplinary subject in order that readers from a variety of backgrounds will be able to fully understand the fundamental principles and features of the sensors and image reconstruction techniques needed for process tomography.
Download or read book Computer Literature Bibliography 1946 1963 written by W. W. Youden and published by . This book was released on 1965 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic RAM written by Muzaffer A. Siddiqi and published by CRC Press. This book was released on 2012-12-19 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of their widespread use in mainframes, PCs, and mobile audio and video devices, DRAMs are being manufactured in ever increasing volume, both in stand-alone and in embedded form as part of a system on chip. Due to the optimum design of their components—access transistor, storage capacitor, and peripherals—DRAMs are the cheapest and densest semiconductor memory currently available. As a result, most of DRAM structure research and development focuses on the technology used for its constituent components and their interconnections. However, only a few books are available on semiconductor memories in general and fewer on DRAMs. Dynamic RAM: Technology Advancements provides a holistic view of the DRAM technology with a systematic description of the advancements in the field since the 1970s, and an analysis of future challenges. Topics Include: DRAM cells of all types, including planar, three-dimensional (3-D) trench or stacked, COB or CUB, vertical, and mechanically robust cells using advanced transistors and storage capacitors Advancements in transistor technology for the RCAT, SCAT, FinFET, BT FinFET, Saddle and advanced recess type, and storage capacitor realizations How sub 100 nm trench DRAM technologies and sub 50 nm stacked DRAM technologies and related topics may lead to new research Various types of leakages and power consumption reduction methods in active and sleep mode Various types of SAs and yield enhancement techniques employing ECC and redundancy A worthwhile addition to semiconductor memory research, academicians and researchers interested in the design and optimization of high-density and cost-efficient DRAMs may also find it useful as part of a graduate-level course.
Download or read book Instrument and Automation Engineers Handbook written by Bela G. Liptak and published by CRC Press. This book was released on 2022-08-31 with total page 3560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Instrument and Automation Engineers’ Handbook (IAEH) is the Number 1 process automation handbook in the world. The two volumes in this greatly expanded Fifth Edition deal with measurement devices and analyzers. Volume one, Measurement and Safety, covers safety sensors and the detectors of physical properties, while volume two, Analysis and Analysis, describes the measurement of such analytical properties as composition. Complete with 245 alphabetized chapters and a thorough index for quick access to specific information, the IAEH, Fifth Edition is a must-have reference for instrument and automation engineers working in the chemical, oil/gas, pharmaceutical, pollution, energy, plastics, paper, wastewater, food, etc. industries.
Download or read book Measurement and Safety written by Béla G. Lipták and published by CRC Press. This book was released on 2016-11-25 with total page 2226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is dedicated to the next generation of automation engineers working in the fields of measurement, control, and safety, describing the sensors and detectors used in the measurement of process variables.
Download or read book Progress in Optics written by Emil Wolf and published by Elsevier. This book was released on 1961 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in Optics Volume 40.
Download or read book ULSI Process Integration III written by Electrochemical Society. Meeting and published by The Electrochemical Society. This book was released on 2003 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductor Technology ISTC 2001 written by Ming Yang and published by . This book was released on 2001 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon Compatible Materials Processes and Technologies for Advanced Integrated Circuits and Emerging Applications written by F. Roozeboom and published by The Electrochemical Society. This book was released on 2011-04-25 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of ECS Transactions covers emerging materials, process and technology options for large-area silicon wafers to enhance advanced IC performance or to enable revolutionary device structures with entirely new functionalities. Topics : high-mobility channel materials, (e.g. strained Si/Ge, compound semiconductors and graphene), high-performance gate stacks and low-resistivity junctions and contacts on new, Si-compatible materials; new materials and processes for 3-D (TSV) integration ; synthesis of nano-structures including wires, pores and membranes of Si-compatible materials; novel MEMS/NEMS structures and their integration with the mainstream Si-IC technology.
Download or read book Process Control written by Béla G. Lipták and published by Butterworth-Heinemann. This book was released on 2013-10-02 with total page 1580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrument Engineers' Handbook, Third Edition: Process Control provides information pertinent to control hardware, including transmitters, controllers, control valves, displays, and computer systems. This book presents the control theory and shows how the unit processes of distillation and chemical reaction should be controlled. Organized into eight chapters, this edition begins with an overview of the method needed for the state-of-the-art practice of process control. This text then examines the relative merits of digital and analog displays and computers. Other chapters consider the basic industrial annunciators and other alarm systems, which consist of multiple individual alarm points that are connected to a trouble contact, a logic module, and a visual indicator. This book discusses as well the data loggers available for process control applications. The final chapter deals with the various pump control systems, the features and designs of variable-speed drives, and the metering pumps. This book is a valuable resource for engineers.
