Download or read book Non Linear Static and Cyclic Analysis of Steel Frames with Semi Rigid Connections written by Siu-Lai Chan and published by Elsevier. This book was released on 2000-05-19 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the discussion and studies of simple and efficient numerical procedures for large deflection and elasto-plastic analysis of steel frames under static and dynamic loading. In chapter 1, the basic fundamental behaviour and philosophy for design of structural steel is discussed, emphasising different modes of buckling and the inter-relationship between different types of analysis. In addition to this, different levels of refinement for non-linear analysis are described. An introduction is also given to the well-known P-&dgr; and P-&Dgr; effects. Chapter 2 presents the basic matrix method of analysis and gives several examples of linear analysis of semi-rigid pointed frames. It is evident from this that one must have a good understanding of first-order linear analysis before handling a second-order non-linear analysis. In chapter 3, the linearized bifurcation and second-order large deflection are compared and the detailed procedure for a second-order analysis based on the Newton-Raphson scheme is described. Chapter 4 introduces various solution schemes for tracing of post-buckling equilibrium paths and the Minimum Residual Displacement control method with arc-length load step control is employed for the post-buckling analysis of two and three dimensional structures. Chapter 5 addresses the non-linear behaviour and modelling of semi-rigid connections while several numerical functions for description of moment versus rotation curves of typical connection types are introduced. The scope of the work in chapter 6 covers semi-rigid connections and material yielding to the static analysis of steel frames. Chapter 7 studies the cyclic response of steel frames with semi-rigid joints and elastic material characteristics. In the last chapter the combined effects of semi-rigid connections and plastic hinges on steel frames under time-dependent loads are studied using a simple springs-in-series model. For computational effectiveness and efficiency, the concentrated plastic hinge concept is used throughout these studies.
Download or read book Advanced Analysis for Three Dimensional Semi Rigid Steel Frames subjected to Static and Dynamic Loadings written by Phu-Cuong Nguyen and published by GRIN Verlag. This book was released on 2023-05-26 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doctoral Thesis / Dissertation from the year 2014 in the subject Engineering - Civil Engineering, grade: 9, , course: Advanced Steel Structures, language: English, abstract: This dissertation presents three various advanced analysis approaches which can capture accurately and efficiently the ultimate strength and behavior of steel framed structures with nonlinear beam-to-column connections subjected to static and dynamic loadings. Three major sources of nonlinearity are considered in the analyses as follows: (1) material nonlinearity; (2) geometric nonlinearity; and (3) connection nonlinearity. Three types of nonlinear beam-column element formulation considering both geometric and material nonlinearities are coded into two nonlinear structural analysis programs: (1) Nonlinear Structural Analysis Program (NSAP) – 2-D plastic-zone finite element; (2) Practical Advanced Analysis Program (PAAP) – 3-D refined plastic-hinge element and 3-D plastic-fiber element. Three types of steel frames analyzed by the proposed program are: (1) rigid frames – beam-to-column connections are fully rigid; (2) linear semi-rigid frames – beam-to-column connections have constant stiffness; and (3) nonlinear semi-rigid frames – beam-to-column connections have continuously variable stiffness. Three types of analysis can be performed are: (1) nonlinear inelastic static analysis; (2) nonlinear elastic and inelastic time-history analysis; and (3) free vibration analysis. Three main resources of damping are taken into account in the proposed programs are: (1) hysteretic damping due to inelastic material; (2) structural viscous damping employing Rayleigh damping; (3) hysteretic damping due to nonlinear beam-to-column connections. Two computer programs are developed: (1) Nonlinear Structural Analysis Program (NSAP) – written in the C++ programming language; (2) Practical Advanced Analysis Program (PAAP) – written in the FORTRAN 77 programming language. They are verified for accuracy and computational efficiency by comparing predicted results with those generated by the commercial finite element analysis packages of ABAQUS and SAP2000, and other results available in the literature. Through several numerical examples, the proposed program (PAAP) proves to be a reliable and efficient tool for daily practice design in lieu of using costly and time-consuming commercial software.
Download or read book Development and Application of Nonlinear Dissipative Device in Structural Vibration Control written by Zheng Lu and published by MDPI. This book was released on 2018-08-21 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue " Development and Application of Nonlinear Dissipative Device in Structural Vibration Control" that was published in Applied Sciences
Download or read book Proceedings of AICCE 19 written by Fadzli Mohamed Nazri and published by Springer Nature. This book was released on 2019-11-28 with total page 1635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest research, innovations, and applications in the field of civil engineering, as presented by leading national and international academics, researchers, engineers, and postgraduate students at the AWAM International Conference on Civil Engineering 2019 (AICCE’19), held in Penang, Malaysia on August 21-22, 2019. The book covers highly diverse topics in the main fields of civil engineering, including structural and earthquake engineering, environmental engineering, geotechnical engineering, highway and transportation engineering, water resources engineering, and geomatic and construction management. In line with the conference theme, “Transforming the Nation for a Sustainable Tomorrow”, which relates to the United Nations’ 17 Global Goals for Sustainable Development, it highlights important elements in the planning and development stages to establish design standards beneficial to the environment and its surroundings. The contributions introduce numerous exciting ideas that spur novel research directions and foster multidisciplinary collaborations between various specialists in the field of civil engineering.
Download or read book Advances in Steel Structures written by S.L. Chan and published by Elsevier. This book was released on 2002-11-15 with total page 1276 pages. Available in PDF, EPUB and Kindle. Book excerpt: These two volumes of proceedings contain nine invited keynote papers and 130 contributed papers presented at the Third International Conference on Advances in Steel Structures (ICASS '02) held on 9-11 December 2002 in Hong Kong, China. The conference is a sequel to the First and the Second International Conferences on Advances in Steel Structures held in Hong Kong in December 1996 and 1999. The conference provides a forum for discussion and dissemination by researchers and designers of recent advances in the analysis, behaviour, design and construction of steel structures. Papers were contributed from over 18 countries around the world. They report current state-of-the art and point to future directions of structural steel research, covering a wide spectrum of topics including: beams and columns; connections; scaffolds and slender structures; cold-formed steel; composite construction; plates; shells; bridges; dynamics; impact mechanics; effects of welding; fatigue and fracture; fire performance; and analysis and design.
Download or read book Recent Advances in Computational Mechanics and Simulations written by Sandip Kumar Saha and published by Springer Nature. This book was released on 2020-11-23 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the 7th International Congress on Computational Mechanics and Simulation, held at IIT Mandi, India. The papers discuss the development of mathematical models representing physical phenomena and apply modern computing methods to analyze a broad range of applications including civil, offshore, aerospace, automotive, naval and nuclear structures. Special emphasis is given on simulation of structural response under extreme loading such as earthquake, blast etc. The book is of interest to researchers and academics from civil engineering, mechanical engineering, aerospace engineering, materials engineering/science, physics, mathematics and other disciplines.
Download or read book Advanced Analysis and Design of Steel Frames written by Gou-Qiang Li and published by John Wiley & Sons. This book was released on 2007-06-13 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel frames are used in many commercial high-rise buildings, as well as industrial structures, such as ore mines and oilrigs. Enabling construction of ever lighter and safer structures, steel frames have become an important topic for engineers. This book, split into two parts covering advanced analysis and advanced design of steel frames, guides the reader from a broad array of frame elements through to advanced design methods such as deterministic, reliability, and system reliability design approaches. This book connects reliability evaluation of structural systems to advanced analysis of steel frames, and ensures that the steel frame design described is founded on system reliability. Important features of the this book include: fundamental equations governing the elastic and elasto-plastic equilibrium of beam, sheer-beam, column, joint-panel, and brace elements for steel frames; analysis of elastic buckling, elasto-plastic capacity and earthquake-excited behaviour of steel frames; background knowledge of more precise analysis and safer design of steel frames against gravity and wind, as well as key discussions on seismic analysis. theoretical treatments, followed by numerous examples and applications; a review of the evolution of structural design approaches, and reliability-based advanced analysis, followed by the methods and procedures for how to establish practical design formula. Advanced Design and Analysis of Steel Frames provides students, researchers, and engineers with an integrated examination of this core civil and structural engineering topic. The logical treatment of both advanced analysis followed by advanced design makes this an invaluable reference tool, comprising of reviews, methods, procedures, examples, and applications of steel frames in one complete volume.
Download or read book Proceedings of the 4th Congr s International de G otechnique Ouvrages Structures written by Hoang-Hung Tran-Nguyen and published by Springer. This book was released on 2017-10-20 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume for the 4th international conference CIGOS 2017 (Congrès International de Géotechnique - Ouvrages - Structures) presents novel technologies, solutions and research advances, making it an excellent guide in civil engineering for researchers, students, and professional engineers alike. Since 2010, CIGOS has become a vital forum for international scientific exchange on civil engineering. It aims to promote beneficial economic partnerships and technology exchanges between enterprises, worldwide institutions and universities. Following the success of the last three CIGOS conferences (2010, 2013 and 2015), the 4th conference was held at Ho Chi Minh City University of Technology, Ho Chi Minh City (Saigon), Vietnam on 26 to 27 October 2017. The main scientific themes of CIGOS 2017 were focused on ‘New Challenges in Civil Engineering’.
Download or read book Futures in Mechanics of Structures and Materials written by Thiru Aravinthan and published by CRC Press. This book was released on 2008-11-20 with total page 915 pages. Available in PDF, EPUB and Kindle. Book excerpt: Futures in Mechanics of Structures and Materials is a collection of peer-reviewed papers presented at the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20, University of Southern Queensland, Toowoomba, Queensland, Australia, 2 - 5 December 2008) by academics, researchers and practicing engineers mainly from Austral
Download or read book Stability Design of Semi Rigid Frames written by W. F. Chen and published by John Wiley & Sons. This book was released on 1995-12-12 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semi-rigid steel frames are revolutionizing structural design. This book is a practical professional reference, covering analytical methods for the evaluation of connection flexibility and its influence on the stability of the entire framework. The methods range from a simplified member-by-member design approach to a more sophisticated computer-based advanced analysis and design approach.
Download or read book Improvement of Buildings Structural Quality by New Technologies written by Christian Schauer and published by CRC Press. This book was released on 2005-01-20 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Around 100 scientists from 21 countries contributed to the four years of assembled works contained in this volume. Launched in May 2000, the aims of this cooperative action were: * to develop, combine and disseminate new technical engineering technologies * to improve the quality of urban buildings * to propose new technical solutions to architects and planners * to reduce the disturbance caused by construction in urban areas and improve urban quality of life. This publication is the final report of COST C12, and includes datasheets of key information related to mixed building technology, structural integrity under exception actions, and urban design.
Download or read book Buildings and Structures under Extreme Loads written by Chiara Bedon and published by MDPI. This book was released on 2020-11-25 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exceptional loads on buildings and structures may have different causes, including high-strain dynamic effects due to natural hazards, man-made attacks, and accidents, as well as extreme operational conditions (severe temperature variations, humidity, etc.). All of these aspects can be critical for specific structural typologies and/or materials that are particularly sensitive to external conditions. In this regard, dedicated and refined methods are required for their design, analysis, and maintenance under the expected lifetime. There are major challenges related to the structural typology and material properties with respect to the key features of the imposed design load. Further issues can be derived from the need for risk mitigation or retrofit of existing structures as well as from the optimal and safe design of innovative materials/systems. Finally, in some cases, no appropriate design recommendations are available and, thus, experimental investigations can have a key role within the overall process. In this Special Issue, original research studies, review papers, and experimental and/or numerical investigations are presented for the structural performance assessment of buildings and structures under various extreme conditions that are of interest for design.
Download or read book Proceedings of the Indian Structural Steel Conference 2020 Vol 1 written by Mahendrakumar Madhavan and published by Springer Nature. This book was released on 2023-08-16 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select peer-reviewed proceedings of the Indian Structural Steel Conference (ISSC 2020). The topics cover state-of-the-art and state-of-the-practice in structural engineering, and latest research in structural modeling and design. Novel analytical, computational and experimental techniques, proposal of new structural systems, innovative methods for maintenance, rehabilitation, and monitoring of existing structures, and investigation of the properties of engineering materials as related to structural behavior are presented in the book. This book will be very useful for structural engineers, researchers, and consultants interested in sustainable materials and steel construction.
Download or read book Design Fabrication and Economy of Metal Structures written by Károly Jármai and published by Springer Science & Business Media. This book was released on 2013-03-15 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: These are the proceedings of the International Conference on Design, Fabrication and Economy of Metal Structures held on 24-26 April 2013 in Miskolc, Hungary which contain 99 papers covering: Structural optimization Thin-walled structures Stability Fatigue Frames Fire Fabrication Welding technology Applications Steel-concrete composite Special problems The authors are from 23 different countries, ensuring that the themes covered are of worldwide interest and importance. The International Institute of Welding (IIW), the International Society of Structural and Multidisciplinary Optimization (ISSMO), the TÁMOP 4.2.1.B-10/2/KONV-2010-0001 project entitled “Increasing the quality of higher education through the development of research - development and innovation program at the University of Miskolc supported by the European Union, co-financed by the European Social Fund” and many other sponsors helped organizers to collect these valuable studies, the results of which will provoke discussion, and provide an important reference for civil and mechanical engineers, architects, researchers and structural designers and fabricators, as well as managers in a range of industries including building, transport, shipbuilding, aircraft, chemical and offshore engineering.
Download or read book Advances in Steel Structures ICASS 96 written by S.L. Chan and published by Elsevier. This book was released on 1996-12-06 with total page 1230 pages. Available in PDF, EPUB and Kindle. Book excerpt: These two volumes of proceedings contain 11 invited keynote papers and 172 contributed papers presented at the International Conference on Advances in Steel Structures held on 11-14 December 1996 in Hong Kong. The papers cover a wide spectrum of topics and have been contributed from over 20 countries around the world. The conference, the first ever of its kind in Hong Kong, provided a forum for discussion and dissemination by researchers and designers of recent advances in the analysis, behaviour, design and construction of steel structures. The papers in the proceedings report the current state-of-the-art and point to the future directions of structural steel research. Volume I contains 93 papers on the analysis, behaviour, design and construction of framed structures and bridges, with 90 papers in Volume II dealing with plates, shells, analysis, optimization and computer applications, dynamics and seismic design, fatigue, and soil-structure interaction.
Download or read book Steel and Composite Structures written by Y. C. Wang and published by Routledge. This book was released on 2018-05-08 with total page 1665 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 150 papers representing the most recent international research findings on steel and composite structures. Including steel constructions; buckling and stability; codes; composite; control; fatigue and fracture; fire; impact; joints; maintenance; plates and shells; retrofitting; seismic; space structures; steel; structural analysis; structural components and assemblies; thin-walled structures; vibrations, and wind. A special session is dedicated on codification. A valuable source of information to researchers and practitioners in the field of steel and composite structures.
Download or read book Smart Connection Systems written by Jong Wan Hu and published by CRC Press. This book was released on 2015-10-05 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces new smart connection systems which can be used in aseismic building design in order to control inter-story drifts and to reduce residual displacements. They are also utilized as damper devices and base isolators. The application of these systems to composite moment frame buildings will also be treated in the book. In addition,
