Download or read book Noise Characterization and Modeling of MOSFETs for RF IC Applications written by Chih-Hung Chen and published by . This book was released on 2002 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lastly, the design strategies of a low noise amplifier based on the developed noise models and extracted noise information are presented as a guide line to choose the device size and bias condition of the transistors. The impact of the model accuracy on the simulated noise performance of a two-stage low noise amplifier is also presented.

Download or read book CMOS RF Modeling Characterization and Applications written by M. Jamal Deen and published by World Scientific. This book was released on 2002 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS technology has now reached a state of evolution, in terms of both frequency and noise, where it is becoming a serious contender for radio frequency (RF) applications in the GHz range. Cutoff frequencies of about 50 GHz have been reported for 0.18 æm CMOS technology, and are expected to reach about 100 GHz when the feature size shrinks to 100 nm within a few years. This translates into CMOS circuit operating frequencies well into the GHz range, which covers the frequency range of many of today's popular wireless products, such as cell phones, GPS (Global Positioning System) and Bluetooth. Of course, the great interest in RF CMOS comes from the obvious advantages of CMOS technology in terms of production cost, high-level integration, and the ability to combine digital, analog and RF circuits on the same chip. This book discusses many of the challenges facing the CMOS RF circuit designer in terms of device modeling and characterization, which are crucial issues in circuit simulation and design.

Download or read book Modeling and Characterization of RF and Microwave Power FETs written by Peter Aaen and published by Cambridge University Press. This book was released on 2007-06-25 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive exposition of FET modeling, and is a must-have resource for seasoned professionals and new graduates in the RF and microwave power amplifier design and modeling community. In it, you will find descriptions of characterization and measurement techniques, analysis methods, and the simulator implementation, model verification and validation procedures that are needed to produce a transistor model that can be used with confidence by the circuit designer. Written by semiconductor industry professionals with many years' device modeling experience in LDMOS and III-V technologies, this was the first book to address the modeling requirements specific to high-power RF transistors. A technology-independent approach is described, addressing thermal effects, scaling issues, nonlinear modeling, and in-package matching networks. These are illustrated using the current market-leading high-power RF technology, LDMOS, as well as with III-V power devices.

Download or read book Wide Band and Noise Characterization of Various MOSFETS for Optimized Use in RF Circuits written by Mostafa Emam and published by . This book was released on 2010 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless, portable, and performance are becoming the keywords for both the consumer electronics and the telecommunication markets. These key requirements are very demanding on the circuit design and on the technology levels. In fact, the circuit design is no more separated from the technology. The passage from micro- to nano-electronics was accompanied by significant revolutionary enhancements and modifications of device modeling. In order to meet the new challenges of advanced applications, it is indispensable for the device model to approach from the device physics, as opposed to the empirical models known earlier. This leads, de facto, to a more complicated device model. As a result, a good circuit designer should coercively comprehend the device physics. A profound research is indeed compulsory in this gray area between the circuit design and the device characterization conventional areas.In this context, the work of this PhD thesis is devoted to provide the link between the device engineering/characterization domain and the circuit design domain, pronouncedly for RF applications. This is achieved through an elaborated research of already existing transistor structures (floating-body and body-tied) as well as new structures (graded channel). Different technologies such as bulk, partially- and fully-depleted SOI are also considered. Based on a complete flow (design of layout to on-wafer measurements), a detailed comparison of all transistors (in terms of dc, ac, RF, non-linear, RF noise, low voltage low power, and high temperature performances) is presented in order to render the RF circuit designer with adequate information for a successful RF product.

Download or read book MOSFET Modeling for Circuit Analysis and Design written by Carlos Galup-Montoro and published by World Scientific. This book was released on 2007 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book dedicated to the next generation of MOSFET models. Addressed to circuit designers with an in-depth treatment that appeals to device specialists, the book presents a fresh view of compact modeling, having completely abandoned the regional modeling approach.Both an overview of the basic physics theory required to build compact MOSFET models and a unified treatment of inversion-charge and surface-potential models are provided. The needs of digital, analog and RF designers as regards the availability of simple equations for circuit designs are taken into account. Compact expressions for hand analysis or for automatic synthesis, valid in all operating regions, are presented throughout the book. All the main expressions for computer simulation used in the new generation compact models are derived.Since designers in advanced technologies are increasingly concerned with fluctuations, the modeling of fluctuations is strongly emphasized. A unified approach for both space (matching) and time (noise) fluctuations is introduced.

Download or read book Noise Characterization and Modeling of InP InGaAs HBTs for RF Circuit Design written by Alex Huber and published by . This book was released on 2000 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Noise Analysis of Radio Frequency Circuits written by Amit Mehrotra and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Predicting noise in RF systems at the design stage is extremely important. This book concentrates on developing noise simulation techniques for RF circuits. The authors present a novel approach of performing noise analysis for RF circuits.

Download or read book RF Characterization and Modeling of MOSFET Power Amplifier in Wireless Communication written by Kenneth Kin Pun Tsui and published by . This book was released on 2003 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Noise in Devices and Circuits written by and published by . This book was released on 2003 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of CMOS RF Integrated Circuits and Systems written by Kiat Seng Yeo and published by World Scientific. This book was released on 2010 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the most comprehensive and in-depth coverage of the latest circuit design developments in RF CMOS technology. It is a practical and cutting-edge guide, packed with proven circuit techniques and innovative design methodologies for solving challenging problems associated with RF integrated circuits and systems. This invaluable resource features a collection of the finest design practices that may soon drive the system-on-chip revolution. Using this book's state-of-the-art design techniques, one can apply existing technologies in novel ways and to create new circuit designs for the future.

Download or read book BSIM Bulk MOSFET Model for IC Design Digital Analog RF and High Voltage written by Chenming Hu and published by Elsevier. This book was released on 2023-04-26 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: BSIM-Bulk MOSFET Model for IC Design - Digital, Analog, RF and High-Voltage provides in-depth knowledge of the internal operation of the model. The authors not only discuss the fundamental core of the model, but also provide details of the recent developments and new real-device effect models. In addition, the book covers the parameter extraction procedures, addressing geometrical scaling, temperatures, and more. There is also a dedicated chapter on extensive quality testing procedures and experimental results. This book discusses every aspect of the model in detail, and hence will be of significant use for the industry and academia. Those working in the semiconductor industry often run into a variety of problems like model non-convergence or non-physical simulation results. This is largely due to a limited understanding of the internal operations of the model as literature and technical manuals are insufficient. This also creates huge difficulty in developing their own IP models. Similarly, circuit designers and researcher across the globe need to know new features available to them so that the circuits can be more efficiently designed. - Reviews the latest advances in fabrication methods for metal chalcogenide-based biosensors - Discusses the parameters of biosensor devices to aid in materials selection - Provides readers with a look at the chemical and physical properties of reactive metals, noble metals, transition metals chalcogenides and their connection to biosensor device performance

Download or read book Compact Models for Integrated Circuit Design written by Samar K. Saha and published by CRC Press. This book was released on 2018-09-03 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Models for Integrated Circuit Design: Conventional Transistors and Beyond provides a modern treatise on compact models for circuit computer-aided design (CAD). Written by an author with more than 25 years of industry experience in semiconductor processes, devices, and circuit CAD, and more than 10 years of academic experience in teaching compact modeling courses, this first-of-its-kind book on compact SPICE models for very-large-scale-integrated (VLSI) chip design offers a balanced presentation of compact modeling crucial for addressing current modeling challenges and understanding new models for emerging devices. Starting from basic semiconductor physics and covering state-of-the-art device regimes from conventional micron to nanometer, this text: Presents industry standard models for bipolar-junction transistors (BJTs), metal-oxide-semiconductor (MOS) field-effect-transistors (FETs), FinFETs, and tunnel field-effect transistors (TFETs), along with statistical MOS models Discusses the major issue of process variability, which severely impacts device and circuit performance in advanced technologies and requires statistical compact models Promotes further research of the evolution and development of compact models for VLSI circuit design and analysis Supplies fundamental and practical knowledge necessary for efficient integrated circuit (IC) design using nanoscale devices Includes exercise problems at the end of each chapter and extensive references at the end of the book Compact Models for Integrated Circuit Design: Conventional Transistors and Beyond is intended for senior undergraduate and graduate courses in electrical and electronics engineering as well as for researchers and practitioners working in the area of electron devices. However, even those unfamiliar with semiconductor physics gain a solid grasp of compact modeling concepts from this book.

Download or read book Low Frequency Noise in Advanced MOS Devices written by Martin Haartman and published by Springer Science & Business Media. This book was released on 2007-08-23 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an introduction to noise, describing fundamental noise sources and basic circuit analysis, discussing characterization of low-frequency noise and offering practical advice that bridges concepts of noise theory and modelling, characterization, CMOS technology and circuits. The text offers the latest research, reviewing the most recent publications and conference presentations. The book concludes with an introduction to noise in analog/RF circuits and describes how low-frequency noise can affect these circuits.

Download or read book Characterization Methods for Submicron MOSFETs written by Hisham Haddara and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is true that the Metal-Oxide-Semiconductor Field-Eeffect Transistor (MOSFET) is a key component in modern microelectronics. It is also true that there is a lack of comprehensive books on MOSFET characterization in gen eral. However there is more than that as to the motivation and reasons behind writing this book. During the last decade, device physicists, researchers and engineers have been continuously faced with new elements which made the task of MOSFET characterization more and more crucial as well as difficult. The progressive miniaturization of devices has caused several phenomena to emerge and modify the performance of scaled-down MOSFETs. Localized degradation induced by hot carrier injection and Random Telegraph Signal (RTS) noise generated by individual traps are examples of these phenomena. Therefore, it was inevitable to develop new models and new characterization methods or at least adapt the existing ones to cope with the special nature of these new phenomena. The need for more deep and extensive characterization of MOSFET param eters has further increased as the applications of this device have gained ground in many new fields in which its performance has become more and more sensi tive to the properties of its Si - Si0 interface. MOS transistors have crossed 2 the borders of high speed electronics where they operate at GHz frequencies. Moreover, MOSFETs are now widely employed in the subthreshold regime in neural circuits and biomedical applications.

Download or read book MOSFET Modeling BSIM3 User s Guide written by Yuhua Cheng and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circuit simulation is essential in integrated circuit design, and the accuracy of circuit simulation depends on the accuracy of the transistor model. BSIM3v3 (BSIM for Berkeley Short-channel IGFET Model) has been selected as the first MOSFET model for standardization by the Compact Model Council, a consortium of leading companies in semiconductor and design tools. In the next few years, many fabless and integrated semiconductor companies are expected to switch from dozens of other MOSFET models to BSIM3. This will require many device engineers and most circuit designers to learn the basics of BSIM3. MOSFET Modeling & BSIM3 User's Guide explains the detailed physical effects that are important in modeling MOSFETs, and presents the derivations of compact model expressions so that users can understand the physical meaning of the model equations and parameters. It is the first book devoted to BSIM3. It treats the BSIM3 model in detail as used in digital, analog and RF circuit design. It covers the complete set of models, i.e., I-V model, capacitance model, noise model, parasitics model, substrate current model, temperature effect model and non quasi-static model. MOSFET Modeling & BSIM3 User's Guide not only addresses the device modeling issues but also provides a user's guide to the device or circuit design engineers who use the BSIM3 model in digital/analog circuit design, RF modeling, statistical modeling, and technology prediction. This book is written for circuit designers and device engineers, as well as device scientists worldwide. It is also suitable as a reference for graduate courses and courses in circuit design or device modelling. Furthermore, it can be used as a textbook for industry courses devoted to BSIM3. MOSFET Modeling & BSIM3 User's Guide is comprehensive and practical. It is balanced between the background information and advanced discussion of BSIM3. It is helpful to experts and students alike.

Download or read book High Frequency MOSFET Modeling for RF Applications written by Xiaodong Jin and published by . This book was released on 2001 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Compact Modeling written by Gennady Gildenblat and published by Springer Science & Business Media. This book was released on 2010-06-22 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of the recent texts on compact modeling are limited to a particular class of semiconductor devices and do not provide comprehensive coverage of the field. Having a single comprehensive reference for the compact models of most commonly used semiconductor devices (both active and passive) represents a significant advantage for the reader. Indeed, several kinds of semiconductor devices are routinely encountered in a single IC design or in a single modeling support group. Compact Modeling includes mostly the material that after several years of IC design applications has been found both theoretically sound and practically significant. Assigning the individual chapters to the groups responsible for the definitive work on the subject assures the highest possible degree of expertise on each of the covered models.