Download or read book Aerobic Granular Sludge written by S. Bathe and published by IWA Publishing. This book was released on 2005-03-31 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerobic Granular Sludge has recently received growing attention by researchers and technology developers, worldwide. Laboratory studies and preliminary field tests led to the conclusion that granular activated sludge can be readily established and profitably used in activated sludge plants, provided 'correct' process conditions are chosen. But what makes process conditions 'correct'? And what makes granules different from activated sludge flocs? Answers to these question are offered in Aerobic Granular Sludge. Major topics covered in this book include: Reasons and mechanism of aerobic granule formation Structure of the microbial population of aerobic granules Role, composition and physical properties of EPS Diffuse limitation and microbial activity within granules Physio-chemical characteristics Operation and application of granule reactors Scale-up aspects of granular sludge reactors, and case studies Aerobic Granular Sludge provides up-to-date information about a rapidly emerging new technology of biological treatment.

Download or read book Nitrification denitrification of Wastewater Using a Single sludge System written by Adrian G. Smith and published by Environment Canada : obtained from Training and Technology Transfer Division (Water), Environmental Protection Service, Fisheries and Environment Canada. This book was released on 1978 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Full-scale nitrification-denitritication of wastewater was conducted at the Newmarket, Ontario, Water Pollution Control Plant (WPCP), where primary stage lime treatment for phosphorus removal was being applied. The object of this study was to see what degree of nitrification-denitrification could be maintained within a system with lime treatment. Experiments involved denitrification mixed liquor thickening, methanol dosing and supplementary iron salt addition for phosphorus removal. Constant high (above 200 ml/g) sludge volume index (SVI) was experienced in both the nitrification and combined nitrification denitrification units at Newmarket. This was thought to be caused by lime addition to the primary stage. Full nitrogen conversion and removal were disrupted by sludge chlorination for SVI control. Sorne limitations of the conventional facility were also found to affect nitrogen removal. Supplemental addition of ferrous sulphate, late in the program, to the aeration basin improved phosphorus removal and decreased SVI. Subsequent pilot plant studies were carried out at Brampton and Kleinburg. In these a split-return mode of operation was evaluated under more controlled conditions. The requirements for methanol as a carbon source, process solids distribution, and post-aeration were evaluated for nitrification-denitrification under liquid temperatures ranging from 10 ta 25°C. Denitrification solids thickening and thus improved nitrate removal was observed. Post-aeration proved necessary to maintain low effluent suspended solids, but did contribute dissolved oxygen to the denitrification tank contents.

Download or read book Process Design Manual for Nitrogen Control written by United States. Environmental Protection Agency. Office of Technology Transfer and published by . This book was released on 1975 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nitrification and Denitrification in the Activated Sludge Process written by Michael H. Gerardi and published by John Wiley & Sons. This book was released on 2002-01-09 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nitrification and Denitrification in the Activated Sludge Process, the first in a series on the microbiology of wastewater treatment, comprises the critical topics of cost-effective operation, permit compliance, process control, and troubleshooting in wastewater treatment plants. Avoiding the technical jargon, chemical equations, and kinetics that typically accompany such texts, Nitrification and Denitrification in the Activated Sludge Process directly addresses plant operators and technicians, providing necessary information for understanding the microbiology and biological conditions that occur in the treatment process. Of special interest to wastewater treatment plant operators are the bacteria that degrade nitrogenous wastes–the nitrifying bacteria–and the bacteria that degrade carbonaceous wastes–the cBOD-removing bacteria. Both groups of bacteria need to be routinely monitored and operational conditions favorably adjusted to ensure desired nitrification. Each chapter in this groundbreaking study offers a better understanding of the importance of nitrification and denitrification and the bacteria involved in these crucial processes. Chapters include: Organotrophs The Wastewater Nitrogen Cycle Nitrite Ion Accumulation Dissolved Oxygen Denitrifying Bacteria Gaseous End Products Free Molecular Oxygen The Occurrence of Denitrification

Download or read book Bioelectrochemical Systems written by Korneel Rabaey and published by IWA Publishing. This book was released on 2009-12-01 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the context of wastewater treatment, Bioelectrochemical Systems (BESs) have gained considerable interest in the past few years, and several BES processes are on the brink of application to this area. This book, written by a large number of world experts in the different sub-topics, describes the different aspects and processes relevant to their development. Bioelectrochemical Systems (BESs) use micro-organisms to catalyze an oxidation and/or reduction reaction at an anodic and cathodic electrode respectively. Briefly, at an anode oxidation of organic and inorganic electron donors can occur. Prime examples of such electron donors are waste organics and sulfides. At the cathode, an electron acceptor such as oxygen or nitrate can be reduced. The anode and the cathode are connected through an electrical circuit. If electrical power is harvested from this circuit, the system is called a Microbial Fuel Cell; if electrical power is invested, the system is called a Microbial Electrolysis Cell. The overall framework of bio-energy and bio-fuels is discussed. A number of chapters discuss the basics – microbiology, microbial ecology, electrochemistry, technology and materials development. The book continues by highlighting the plurality of processes based on BES technology already in existence, going from wastewater based reactors to sediment based bio-batteries. The integration of BESs into existing water or process lines is discussed. Finally, an outlook is provided of how BES will fit within the emerging biorefinery area.

Download or read book Nitrification denitrification of Wastewater Using a Single sludge System written by A. G. Smith and published by . This book was released on 1978 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes a full-scale evaluation of the split return mode for nitrification-denitrification of a combined domestic/ industrial wastewater. The investigation, which took place from July 1974 to December 1975 at the Ontario Ministry of the Environment's Ontario Experimental Facility at Brampton, followed pilot-studies at Kleinburg, Ontario. The evaluation investigated the effect of ferric chloride addition on phosphorous removal; the effect of solids retention times and sludge ages on nitrogen reactions at various temperatures; hydrogen peroxide addition and the use of a screen centrifuge on mixed liquor conditioning; as weIl as the suitability of the system for solids control and for maintenance of consistent nitrogen removal under different temperature conditions. It was concluded that the single-sludge, split-return system gave excellent nitrogen removal with minimal methanol application.

Download or read book The Combined Sharon Anammox Process written by L. G. J. M. van Dongen and published by IWA Publishing. This book was released on 2001-09-30 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater treatment management, alongside many other industries, is seeking to attain a higher degree of sustainability for its processes by focusing on new technologies which minimise the consumption of resources or even recover them from the wastewater. Conventional removal of ammonium requires usually large amounts of energy for aeration and organic carbon for denitrification. This report focuses on making the nitrogen-removal process more sustainable. This can be achieved by a partial oxidation of ammonium to nitrite, after which the nitrate produced can be converted into nitrogen gas with the rest of ammonium under anoxic conditions. The treatment of nitrogen-rich water can be carried out beneficially by a combination of the Sharon process with the Anammox process. In this combined process less than 50% of the aeration energy is needed, no COD is required and an insignificant amount of sludge is produced. In this Report the potential of using this technology for the treatment of water arising from sludge treatment at a municipal wastewater treatment plant (WWTP) is evaluated and the results of the operation of the system are described in detail. This reject water contains a significant fraction of the N-load towards the wastewater treatment plant. The results are used in an economic evaluation of a potential full scale installation. The Combined Sharon/Anammox Process Report will provide an invaluable source of information for all those concerned with the efficient and sustainable treatment of wastewater including plant managers, process designers, consultants and researchers.

Download or read book Manual Nitrogen Control written by and published by . This book was released on 1993 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Assessment of Treatment Plant Performance and Water Quality Data A Guide for Students Researchers and Practitioners written by Marcos von Sperling and published by IWA Publishing. This book was released on 2020-01-15 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basic principles for evaluating water quality and treatment plant performance in a clear, innovative and didactic way, using a combined approach that involves the interpretation of monitoring data associated with (i) the basic processes that take place in water bodies and in water and wastewater treatment plants and (ii) data management and statistical calculations to allow a deep interpretation of the data. This book is problem-oriented and works from practice to theory, covering most of the information you will need, such as (a) obtaining flow data and working with the concept of loading, (b) organizing sampling programmes and measurements, (c) connecting laboratory analysis to data management, (e) using numerical and graphical methods for describing monitoring data (descriptive statistics), (f) understanding and reporting removal efficiencies, (g) recognizing symmetry and asymmetry in monitoring data (normal and log-normal distributions), (h) evaluating compliance with targets and regulatory standards for effluents and water bodies, (i) making comparisons with the monitoring data (tests of hypothesis), (j) understanding the relationship between monitoring variables (correlation and regression analysis), (k) making water and mass balances, (l) understanding the different loading rates applied to treatment units, (m) learning the principles of reaction kinetics and reactor hydraulics and (n) performing calibration and verification of models. The major concepts are illustrated by 92 fully worked-out examples, which are supported by 75 freely-downloadable Excel spreadsheets. Each chapter concludes with a checklist for your report. If you are a student, researcher or practitioner planning to use or already using treatment plant and water quality monitoring data, then this book is for you! 75 Excel spreadsheets are available to download.

Download or read book Sludge Reduction Technologies in Wastewater Treatment Plants written by Paola Foladori and published by IWA Publishing. This book was released on 2010-07-31 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sludge Reduction Technologies in Wastewater Treatment Plants is a review of the sludge reduction techniques integrated in wastewater treatment plants with detailed chapters on the most promising and most widespread techniques. The aim of the book is to update the international community on the current status of knowledge and techniques in the field of sludge reduction. It will provide a comprehensive understanding of the following issues in sludge reduction: principles of sludge reduction techniques; process configurations; potential performance; advantages and drawbacks; economics and energy consumption. This book will be essential reading for managers and technical staff of wastewater treatment plants as well as graduate students and post-graduate specialists.

Download or read book Activated Sludge Models written by The IWA Task Group on Mathematical Modelling for Design and Operation of Biological Wastewater Treatment and published by IWA Publishing. This book was released on 2000-05-31 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been produced to give a total overview of the Activated Sludge Model (ASM) family at the start of 2000 and to give the reader easy access to the different models in their original versions. It thus presents ASM1, ASM2, ASM2d and ASM3 together for the first time. Modelling of activated sludge processes has become a common part of the design and operation of wastewater treatment plants. Today models are being used in design, control, teaching and research. Contents ASM3: Introduction, Comparison of ASM1 and ASM3, ASM3: Definition of compounds in the model, ASM3: Definition of processes in the Model, ASM3: Stoichiometry, ASM3: Kinetics, Limitations of ASM3, Aspects of application of ASM3, ASM3C: A Carbon based model, Conclusion ASM 2d: Introduction, Conceptual Approach, ASM 2d, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Limitations, Conclusion ASM 2: Introduction, ASM 2, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Wastewater Characterization for Activated Sludge Processes, Calibration of the ASM 2, Model Limitations, Conclusion, Bibliography ASM 1: Introduction, Method of Model Presentation, Model Incorporating Carbon Oxidation Nitrification and Denitrification, Characterization of Wastewater and Estimation of Parameter Values, Typical Parameter Ranges, Default Values, and Effects of Environmental Factors, Assumptions, Restrictions and Constraints, Implementation of the Activated Sludge Model Scientific and Technical Report No.9

Download or read book Process Design Manual for Nitrogen Control written by United States. Environmental Protection Agency. Office of Technology Transfer and published by . This book was released on 1975 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Activated Sludge and Aerobic Biofilm Reactors written by Marcos Von Sperling and published by IWA Publishing. This book was released on 2007-03-30 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated Sludge and Aerobic Biofilm Reactors is the fifth volume in the series Biological Wastewater Treatment. The first part of the book is devoted to the activated sludge process, covering the removal of organic matter, nitrogen and phosphorus.A detailed analysis of the biological reactor (aeration tank) and the final sedimentation tanks is provided. The second part of the book covers aerobic biofilm reactors, especially trickling filters, rotating biological contractors and submerged aerated biofilters. For all the systems, the book presents in a clear and informative way the main concepts, working principles, expected removal efficiencies, design criteria, design examples, construction aspects and operational guidelines. About the series: The series is based on a highly acclaimed set of best selling textbooks. This international version is comprised by six textbooks giving a state-of-the-art presentation of the science and technology of biological wastewater treatment. Other titles in the series are: Volume 1: Waste Stabilisation Ponds; Volume 2: Basic Principles of Wastewater Treatment; Volume 3: Waste Stabilization Ponds; Volume 4: Anaerobic Reactors; Volume 6: Sludge Treatment and Disposal

Download or read book Microbial Electrochemical Technologies written by Sonia M. Tiquia-Arashiro and published by CRC Press. This book was released on 2020-01-06 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book encompasses the most updated and recent account of research and implementation of Microbial Electrochemical Technologies (METs) from pioneers and experienced researchers in the field who have been working on the interface between electrochemistry and microbiology/biotechnology for many years. It provides a holistic view of the METs, detailing the functional mechanisms, operational configurations, influencing factors governing the reaction process and integration strategies. The book not only provides historical perspectives of the technology and its evolution over the years but also the most recent examples of up-scaling and near future commercialization, making it a must-read for researchers, students, industry practitioners and science enthusiasts. Key Features: Introduces novel technologies that can impact the future infrastructure at the water-energy nexus. Outlines methodologies development and application of microbial electrochemical technologies and details out the illustrations of microbial and electrochemical concepts. Reviews applications across a wide variety of scales, from power generation in the laboratory to approaches. Discusses techniques such as molecular biology and mathematical modeling; the future development of this promising technology; and the role of the system components for the implementation of bioelectrochemical technologies for practical utility. Explores key challenges for implementing these systems and compares them to similar renewable energy technologies, including their efficiency, scalability, system lifetimes, and reliability.

Download or read book Advanced Biological Treatment Processes written by Lawrence K. Wang and published by Springer Science & Business Media. This book was released on 2010-03-10 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past 30 years have seen the emergence of a growing desire worldwide that positive actions be taken to restore and protect the environment from the degrading effects of all forms of pollution—air, water, soil, and noise. Because pollution is a direct or indirect consequence of waste, the seemingly idealistic demand for “zero discharge” can be construed as an unrealistic demand for zero waste. However, as long as waste continues to exist, we can only attempt to abate the subsequent pollution by converting it to a less noxious form. Three major questions usually arise when a particular type of pollution has been identi?ed: (1) How serious is the pollution? (2) Is the technology to abate it available? and (3) Do the costs of abatement justify the degree of abatement achieved? This book is one of the volumes of the Handbook of Environmental Engineering series. The principal intention of this series is to help readers formulate answers to the last two questions above. The traditional approach of applying tried-and-true solutions to speci?c pollution problems has been a major contributing factor to the success of environmental en- neering, and has accounted in large measure for the establishment of a “methodology of pollution control. ” However, the realization of the ever-increasing complexity and interrelated nature of current environmental problems renders it imperative that intelligent planning of pollution abatement systems be undertaken.

Download or read book Treatise on Water Science written by and published by Newnes. This book was released on 2010-09-01 with total page 2131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water quality and management are of great significance globally, as the demand for clean, potable water far exceeds the availability. Water science research brings together the natural and applied sciences, engineering, chemistry, law and policy, and economics, and the Treatise on Water Science seeks to unite these areas through contributions from a global team of author-experts. The 4-volume set examines topics in depth, with an emphasis on innovative research and technologies for those working in applied areas. Published in partnership with and endorsed by the International Water Association (IWA), demonstrating the authority of the content Editor-in-Chief Peter Wilderer, a Stockholm Water Prize recipient, has assembled a world-class team of volume editors and contributing authors Topics related to water resource management, water quality and supply, and handling of wastewater are treated in depth

Download or read book Wastewater Treatment Plants written by Syed R. Qasim and published by Routledge. This book was released on 2017-11-22 with total page 1128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Step-by-step procedures for planning, design, construction and operation: * Health and environment * Process improvements * Stormwater and combined sewer control and treatment * Effluent disposal and reuse * Biosolids disposal and reuse * On-site treatment and disposal of small flows * Wastewater treatment plants should be designed so that the effluent standards and reuse objectives, and biosolids regulations can be met with reasonable ease and cost. The design should incorporate flexibility for dealing with seasonal changes, as well as long-term changes in wastewater quality and future regulations. Good planning and design, therefore, must be based on five major steps: characterization of the raw wastewater quality and effluent, pre-design studies to develop alternative processes and selection of final process train, detailed design of the selected alternative, contraction, and operation and maintenance of the completed facility. Engineers, scientists, and financial analysts must utilize principles from a wide range of disciplines: engineering, chemistry, microbiology, geology, architecture, and economics to carry out the responsibilities of designing a wastewater treatment plant. The objective of this book is to present the technical and nontechnical issues that are most commonly addressed in the planning and design reports for wastewater treatment facilities prepared by practicing engineers. Topics discussed include facility planning, process description, process selection logic, mass balance calculations, design calculations, and concepts for equipment sizing. Theory, design, operation and maintenance, trouble shooting, equipment selection and specifications are integrated for each treatment process. Thus delineation of such information for use by students and practicing engineers is the main purpose of this book.