Download or read book NH3 Treatment Processes for the Removal of Ammonia from Municipal Wastewater written by Canada. Environment Canada and published by . This book was released on 2003 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual is an information source document to assist municipal engineers, managers and senior staff at municipal wastewater treatment plants in identifying and evaluating process options available to upgrade existing plants or to install at new plants for the enhanced removal of total ammonia-nitrogen. This reference manual provides a basic understanding of nitrification principles, alternative treatment process types and associated designs, operational requirements, technical considerations and associated costs. It focuses on technical methodologies to permit site-specific assessments and determinations of the most appropriate upgrade measure(s), such as optimization, retrofitting, expansion and/or new process installation.

Download or read book The Combined Sharon Anammox Process written by L. G. J. M. van Dongen and published by IWA Publishing. This book was released on 2001-09-30 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater treatment management, alongside many other industries, is seeking to attain a higher degree of sustainability for its processes by focusing on new technologies which minimise the consumption of resources or even recover them from the wastewater. Conventional removal of ammonium requires usually large amounts of energy for aeration and organic carbon for denitrification. This report focuses on making the nitrogen-removal process more sustainable. This can be achieved by a partial oxidation of ammonium to nitrite, after which the nitrate produced can be converted into nitrogen gas with the rest of ammonium under anoxic conditions. The treatment of nitrogen-rich water can be carried out beneficially by a combination of the Sharon process with the Anammox process. In this combined process less than 50% of the aeration energy is needed, no COD is required and an insignificant amount of sludge is produced. In this Report the potential of using this technology for the treatment of water arising from sludge treatment at a municipal wastewater treatment plant (WWTP) is evaluated and the results of the operation of the system are described in detail. This reject water contains a significant fraction of the N-load towards the wastewater treatment plant. The results are used in an economic evaluation of a potential full scale installation. The Combined Sharon/Anammox Process Report will provide an invaluable source of information for all those concerned with the efficient and sustainable treatment of wastewater including plant managers, process designers, consultants and researchers.

Download or read book A B processes Towards Energy Self sufficient Municipal Wastewater Treatment written by Yu Liu and published by IWA Publishing. This book was released on 2019-11-15 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principle of the conventional activated sludge (CAS) for municipal wastewater treatment is primarily based on biological oxidation by which organic matters are converted to biomass and carbon dioxide. After more than 100 years’ successful application, the CAS process is receiving increasing critiques on its high energy consumption and excessive sludge generation. Currently, almost all municipal wastewater treatment plants with the CAS as a core process are being operated in an energy-negative fashion. To tackle such challenging situations, there is a need to re-examine the present wastewater treatment philosophy by developing and adopting novel process configurations and emerging technologies. The solutions going forward should rely on the ways to improve direct energy recovery from wastewater, while minimizing in-plant energy consumption. This book begins with a critical overview of the energy situation and challenges in current municipal wastewater treatment plants, showing the necessity of the paradigm shift from removal to recovery in terms of energy and resource. As such, the concept of A-B process is discussed in detail in the book. It appears that various A-B process configurations are able to provide possible engineering solutions in which A-stage is primarily designed for COD capture with the aim for direct anaerobic treatment without producing excessive biosludge, while B-stage is designated for nitrogen removal. Making the wastewater treatment energy self-sustainable is obviously of global significance and eventually may become a game changer for the global market of the municipal wastewater reclamation technology. The principal audiences include practitioners, professionals, university researchers, undergraduate and postgraduate students who are interested and specialized in municipal wastewater treatment and process design, environmental engineering, and environmental biotechnology.

Download or read book Process Design Manual for Nitrogen Control written by United States. Environmental Protection Agency. Office of Technology Transfer and published by . This book was released on 1975 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Assessment of Treatment Plant Performance and Water Quality Data A Guide for Students Researchers and Practitioners written by Marcos von Sperling and published by IWA Publishing. This book was released on 2020-01-15 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basic principles for evaluating water quality and treatment plant performance in a clear, innovative and didactic way, using a combined approach that involves the interpretation of monitoring data associated with (i) the basic processes that take place in water bodies and in water and wastewater treatment plants and (ii) data management and statistical calculations to allow a deep interpretation of the data. This book is problem-oriented and works from practice to theory, covering most of the information you will need, such as (a) obtaining flow data and working with the concept of loading, (b) organizing sampling programmes and measurements, (c) connecting laboratory analysis to data management, (e) using numerical and graphical methods for describing monitoring data (descriptive statistics), (f) understanding and reporting removal efficiencies, (g) recognizing symmetry and asymmetry in monitoring data (normal and log-normal distributions), (h) evaluating compliance with targets and regulatory standards for effluents and water bodies, (i) making comparisons with the monitoring data (tests of hypothesis), (j) understanding the relationship between monitoring variables (correlation and regression analysis), (k) making water and mass balances, (l) understanding the different loading rates applied to treatment units, (m) learning the principles of reaction kinetics and reactor hydraulics and (n) performing calibration and verification of models. The major concepts are illustrated by 92 fully worked-out examples, which are supported by 75 freely-downloadable Excel spreadsheets. Each chapter concludes with a checklist for your report. If you are a student, researcher or practitioner planning to use or already using treatment plant and water quality monitoring data, then this book is for you! 75 Excel spreadsheets are available to download.

Download or read book Biogas from Waste and Renewable Resources written by Dieter Deublein and published by John Wiley & Sons. This book was released on 2008-04-18 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written as a practical introduction to biogas plant design and operation, this book fills a huge gap by presenting a systematic guide to this emerging technology -- information otherwise only available in poorly intelligible reports by US governmental and other official agencies. The author draws on teaching material from a university course as well as a wide variety of industrial biogas projects he has been involved with, thus combining didactical skill with real-life examples. Alongside biological and technical aspects of biogas generation, this timely work also looks at safety and legal aspects as well as environmental considerations.

Download or read book Sludge Reduction Technologies in Wastewater Treatment Plants written by Paola Foladori and published by IWA Publishing. This book was released on 2010-07-31 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sludge Reduction Technologies in Wastewater Treatment Plants is a review of the sludge reduction techniques integrated in wastewater treatment plants with detailed chapters on the most promising and most widespread techniques. The aim of the book is to update the international community on the current status of knowledge and techniques in the field of sludge reduction. It will provide a comprehensive understanding of the following issues in sludge reduction: principles of sludge reduction techniques; process configurations; potential performance; advantages and drawbacks; economics and energy consumption. This book will be essential reading for managers and technical staff of wastewater treatment plants as well as graduate students and post-graduate specialists.

Download or read book Rules Rules Rules Rules written by G. Bruce Doern and published by University of Toronto Press. This book was released on 2006-01-01 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rules, Rules, Rules, Rules considers various sectors where rule-making spans all or most of the four levels of jurisdiction - international, federal, provincial, and city or local - in areas such as food safety, investment and trade, forestry, drinking water, oil and gas, and emergency management.

Download or read book Bioelectrochemical Systems written by Korneel Rabaey and published by IWA Publishing. This book was released on 2009-12-01 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the context of wastewater treatment, Bioelectrochemical Systems (BESs) have gained considerable interest in the past few years, and several BES processes are on the brink of application to this area. This book, written by a large number of world experts in the different sub-topics, describes the different aspects and processes relevant to their development. Bioelectrochemical Systems (BESs) use micro-organisms to catalyze an oxidation and/or reduction reaction at an anodic and cathodic electrode respectively. Briefly, at an anode oxidation of organic and inorganic electron donors can occur. Prime examples of such electron donors are waste organics and sulfides. At the cathode, an electron acceptor such as oxygen or nitrate can be reduced. The anode and the cathode are connected through an electrical circuit. If electrical power is harvested from this circuit, the system is called a Microbial Fuel Cell; if electrical power is invested, the system is called a Microbial Electrolysis Cell. The overall framework of bio-energy and bio-fuels is discussed. A number of chapters discuss the basics – microbiology, microbial ecology, electrochemistry, technology and materials development. The book continues by highlighting the plurality of processes based on BES technology already in existence, going from wastewater based reactors to sediment based bio-batteries. The integration of BESs into existing water or process lines is discussed. Finally, an outlook is provided of how BES will fit within the emerging biorefinery area.

Download or read book Water Chemistry written by Patrick Brezonik and published by OUP USA. This book was released on 2011-03-22 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: It emphasizes that both equilibrium and kinetic processes are important in aquatic systems.

Download or read book Membrane Distillation written by Mohamed Khayet Souhaimi and published by Elsevier. This book was released on 2011-08-12 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern membrane engineering is critical to the development of process-intensification strategies and to the stimulation of industrial growth. Membrane Distillation (MD) is a broad reference that covers specific information on membranes available and methods for MD membrane preparation and characterization. The book offers an introduction to the terminology and fundamental concepts as well as a historical review of MD development. Commercial membranes used in MD as well as laboratory-made membranes, including emerging membranes, are described in detail and illustrated by a number of clear and instructive schematic drawings and images. - A comprehensive review on the development of MD membranes, MD modules, MD membrane characterization, MD configurations, applications in different areas and theoretical models - Introduction to the terminology and fundamental concepts associated with MD as well as an historical review of MD development - Description of commercial membranes used in MD as well as laboratory-made membranes, including emerging membranes

Download or read book Aerobic Granular Sludge written by S. Bathe and published by IWA Publishing. This book was released on 2005-03-31 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerobic Granular Sludge has recently received growing attention by researchers and technology developers, worldwide. Laboratory studies and preliminary field tests led to the conclusion that granular activated sludge can be readily established and profitably used in activated sludge plants, provided 'correct' process conditions are chosen. But what makes process conditions 'correct'? And what makes granules different from activated sludge flocs? Answers to these question are offered in Aerobic Granular Sludge. Major topics covered in this book include: Reasons and mechanism of aerobic granule formation Structure of the microbial population of aerobic granules Role, composition and physical properties of EPS Diffuse limitation and microbial activity within granules Physio-chemical characteristics Operation and application of granule reactors Scale-up aspects of granular sludge reactors, and case studies Aerobic Granular Sludge provides up-to-date information about a rapidly emerging new technology of biological treatment.

Download or read book Anaerobic Digestion Model No 1 ADM1 written by IWA Task Group for Mathematical Modelling of Anaerobic Digestion Processes and published by IWA Publishing. This book was released on 2002-02-01 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IWA Task Group for Mathematical Modelling of Anaerobic Digestion Processes was created with the aim to produce a generic model and common platform for dynamic simulations of a variety of anaerobic processes. This book presents the outcome of this undertaking and is the result of four years collaborative work by a number of international experts from various fields of anaerobic process technology. The purpose of this approach is to provide a unified basis for anaerobic digestion modelling. It is hoped this will promote increased application of modelling and simulation as a tool for research, design, operation and optimisation of anaerobic processes worldwide. This model was developed on the basis of the extensive but often disparate work in modelling and simulation of anaerobic digestion systems over the last twenty years. In developing ADM1, the Task Group have tried to establish common nomenclature, units and model structure, consistent with existing anaerobic modelling literature and the popular activated sludge models (See Activated Sludge Models ASM1, ASM2, ASM2d and ASM3, IWA Publishing, 2000, ISBN: 1900222248). As such, it is intended to promote widespread application of simulation from domestic (wastewater and sludge) treatment systems to specialised industrial applications. Outputs from the model include common process variables such gas flow and composition, pH, separate organic acids, and ammonium. The structure has been devised to encourage specific extensions or modifications where required, but still maintain a common platform. During development the model has been successfully tested on a range of systems from full-scale waste sludge digestion to laboratory-scale thermophilic high-rate UASB reactors. The model structure is presented in a readily applicable matrix format for implementation in many available differential equation solvers. It is expected that the model will be available as part of commercial wastewater simulation packages. ADM1 will be a valuable information source for practising engineers working in water treatment (both domestic and industrial) as well as academic researchers and students in Environmental Engineering and Science, Civil and Sanitary Engineering, Biotechnology, and Chemical and Process Engineering departments. Contents Introduction Nomenclature, State Variables and Expressions Biochemical Processes Physicochemical Processes Model Implementation in a Single Stage CSTR Suggested Biochemical Parameter Values, Sensitivity and Estimation Conclusions References Appendix A: Review of Parameters Appendix B: Supplementary Matrix Information Appendix C: Integration with the ASM Appendix D: Estimating Stoichiometric Coefficients for Fermentation Scientific & Technical Report No.13

Download or read book Activated Sludge Models written by The IWA Task Group on Mathematical Modelling for Design and Operation of Biological Wastewater Treatment and published by IWA Publishing. This book was released on 2000-05-31 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been produced to give a total overview of the Activated Sludge Model (ASM) family at the start of 2000 and to give the reader easy access to the different models in their original versions. It thus presents ASM1, ASM2, ASM2d and ASM3 together for the first time. Modelling of activated sludge processes has become a common part of the design and operation of wastewater treatment plants. Today models are being used in design, control, teaching and research. Contents ASM3: Introduction, Comparison of ASM1 and ASM3, ASM3: Definition of compounds in the model, ASM3: Definition of processes in the Model, ASM3: Stoichiometry, ASM3: Kinetics, Limitations of ASM3, Aspects of application of ASM3, ASM3C: A Carbon based model, Conclusion ASM 2d: Introduction, Conceptual Approach, ASM 2d, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Limitations, Conclusion ASM 2: Introduction, ASM 2, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Wastewater Characterization for Activated Sludge Processes, Calibration of the ASM 2, Model Limitations, Conclusion, Bibliography ASM 1: Introduction, Method of Model Presentation, Model Incorporating Carbon Oxidation Nitrification and Denitrification, Characterization of Wastewater and Estimation of Parameter Values, Typical Parameter Ranges, Default Values, and Effects of Environmental Factors, Assumptions, Restrictions and Constraints, Implementation of the Activated Sludge Model Scientific and Technical Report No.9

Download or read book Sustainable Treatment and Reuse of Municipal Wastewater written by Menahem Libhaber and published by IWA Publishing. This book was released on 2012-05-31 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many countries, especially in developing countries, many people are lacking access to water and sanitation services and this inadequate service is the main cause of diseases in these countries. Application of appropriate wastewater treatment technologies, which are effective, low cost (in investment and especially in operation and maintenance), simple to operate, proven technologies, is a key component in any strategy aimed at increasing the coverage of wastewater treatment. Sustainable Treatment and Reuse of Municipal Wastewater presents the concepts of appropriate technology for wastewater treatment and the issues of strategy and policy for increasing wastewater treatment coverage. The book focuses on the resolution of wastewater treatment and disposal problems in developing countries, however the concepts presented are valid and applicable anywhere and plants based on combined unit processes of appropriate technology can also be used in developed countries and provide to them the benefits described. Sustainable Treatment and Reuse of Municipal Wastewater presents the basic engineering design procedures to obtain high quality effluents by treatment plants based on simple, low cost and easy to operate processes. The main message of the book is the idea of the ability to combine unit processes to create a treatment plant based on a series of appropriate technology processes which jointly can generate any required effluent quality. A plant based on a combination of appropriate technology unit processes is still easy to operate and is usually of lower costs than conventional processes in terms of investment and certainly in operation and maintenance. Chapters in the book are organized in a practical and accessible way to: Demonstrate selected unit process of appropriate technology and provide the scientific basis, the equations and the parameters required to design the unit processes, with some innovations developed by the authors. Highlight design procedures for selected combined processes which are in use in developing countries. Propose an innovative Orderly Design Method (ODM), which is easy to follow by practicing engineers, using the equations and formulas developed, once the fundamentals of each unit and combined process have been established. Provide a numeric example for the basic design of each selected appropriate technology process for a city with a population of 20,000 using the ODM and an Excel program which will be provided to the readers for download from an online web page. This book is a valuable and practical resource for all wastewater treatment engineers in field and the operational managers of waste treatment facilities. Authors: Menahem Libhaber, PhD, Consulting Engineer to the World Bank and other institutions, Alvaro Orozco Jaramillo, MSc, Consulting Engineer to the World Bank, the Inter-American Development Bank, Biwater and other institutions in various countries.

Download or read book Domestic Wastewater Treatment in Developing Countries written by Duncan Mara and published by Routledge. This book was released on 2013-06-17 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Affordable and effective domestic wastewater treatment is a critical issue in public health and disease prevention around the world, particularly so in developing countries which often lack the financial and technical resources necessary for proper treatment facilities. This practical guide provides state-of-the-art coverage of methods for domestic wastewater treatment and provides a foundation to the practical design of wastewater treatment and re-use systems. The emphasis is on low-cost, low-energy, low-maintenance, high-performance 'natural' systems that contribute to environmental sustainability by producing effluents that can be safely and profitably used in agriculture for crop irrigation and/or in aquaculture, for fish and aquatic vegetable pond fertilization. Modern design methodologies, with worked design examples, are described for waste stabilization ponds, wastewater storage and treatment reservoirs; constructed wetlands, upflow anaerobic sludge blanket reactors, biofilters, aerated lagoons and oxidation ditches. This book is essential reading for engineers, academics and upper-level and graduate students in engineering, wastewater management and public health, and others interested in sustainable and cost-effective technologies for reducing wastewater-related diseases and environmental damage.

Download or read book Nitrification and Denitrification written by Ivan Zhu and published by BoD – Books on Demand. This book was released on 2017-07-05 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nitrification and denitrification are essential processes for aquatic ecological system and vital for human health. While ammonia is applied for disinfection together with chlorine to produce chloramine, excessive ammonia may cause nitrification and bacteria growth in water transmission pipeline. Since excessive discharge may cause eutrophication and deterioration of aquatic system, nitrate is regulated for wastewater discharge in sensitive areas. Further, nitrate needs to be monitored and controlled in drinking water treatment to protect against methemoglobinemia in bottle-fed infants.