Download or read book Next Generation Micro Nano Systems written by Pietro Vincenzini and published by Trans Tech Publications Ltd. This book was released on 2012-09-11 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 15 peer-reviewed papers collected here together offer a plenitude of up-to-date information on “Next Generation Micro/Nano Systems”. Volume is indexed by Thomson Reuters CPCI-S (WoS). The papers are conveniently arranged into: Chapter 1: Physical, Chemical and Optical MEMS, Chapter 2: Radiofrequency MEMS, Chapter 3: Micro/Nano Fluidics.

Download or read book Next Generation Micro Nano Systems written by and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 15 peer-reviewed papers collected here together offer a plenitude of up-to-date information on "Next Generation Micro/Nano Systems". The papers are conveniently arranged into: Chapter 1: Physical, Chemical and Optical MEMS, Chapter 2: Radiofrequency MEMS, Chapter 3: Micro/Nano Fluidics.

Download or read book Silk based Drug Delivery Systems written by Elia Bari and published by Royal Society of Chemistry. This book was released on 2020-10-07 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering spider silk and silk worm cocoons, the editors elucidate the extraction, structure and properties of silk sericin and silk fibroin.

Download or read book Engineering of Micro Nano Biosystems written by Gregory Barbillon and published by Springer. This book was released on 2019-08-02 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This tutorial book offers an in-depth overview of the fundamental principles of micro/nano technologies and devices related to sensing, actuation and diagnosis in fluidics and biosystems. Research in the MEMS/NEMS and lab-on-chip fields has seen rapid growth in both academic and industrial domains, as these biodevices and systems are increasingly replacing traditional large size diagnostic tools. This book is unique in describing not only the devices and technologies but also the basic principles of their operation. The comprehensive description of the fabrication, packaging and principles of micro/nano biosystems presented in this book offers guidance for researchers designing and implementing these biosystems across diverse fields including medical, pharmaceutical and biological sciences. The book provides a detailed overview of the fundamental mechanical, optical, electrical and magnetic principles involved, together with the technologies required for the design, fabrication and characterization of micro/nano fluidic systems and bio-devices. Written by a collaborative team from France and Korea, the book is suitable for academics, researchers, advanced level students and industrial manufacturers.

Download or read book Nanoscale Devices Materials and Biological Systems written by M. Cahay and published by . This book was released on 2005 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanotechnology in Herbal Medicine written by Sabu Thomas and published by Elsevier. This book was released on 2023-07-13 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology in Herbal Medicine: Applications and Innovations details how nanomaterials can be utilized to improve the therapeutic mechanisms and key properties of herbal drugs. This book guides the reader through the preparation, properties, applications, benefits and challenges of herbal nanoformulations, helping them solve fundamental and applied problems in the area of novel herbal medicines and drug delivery systems. Herbal drugs play a large role in traditional medicines, which are actively used by many cultures across the globe for the treatment of various illnesses and injuries. Despite their widespread use, herbal medicines may lead to possible health risks due to the lack of information on the chemical composition and permitted dosage. Covers a range of nanomaterial types for use in herbal medicine, including polymeric, metallic, carbon-based and magnetic nanoparticles, as well as dendrimers, liposomes, nanogels, and more Explores the variety of biomedical applications for herbal nanoformulations, such as in cancer therapy, cardiovascular disease and wound healing Weighs up the advantages and disadvantages of using nanotechnology in herbal medicine, with a focus on toxicological impact

Download or read book Micro and Nanosystems for Biotechnology written by J. Christopher Love and published by John Wiley & Sons. This book was released on 2016-03-07 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing their emerging capabilities, this volume provides a strong foundation for an understanding of how micro- and nanotechnologies used in biomedical research have evolved from concepts to working platforms. Volume editor Christopher Love has assembled here a highly interdisciplinary group of authors with backgrounds ranging from chemical engineering right up to materials science to reflect how the intersection of ideas from biology with engineering disciplines has spurred on innovations. In fact, a number of the basic technologies described are reaching the market to advance the discovery and development of biopharmaceuticals. The first part of the book focuses on microsystems for single-cell analysis, examining tools and techniques used to isolate cells from a range of biological samples, while the second part is dedicated to tiny technologies for modulating biological systems at the scale of individual cells, tissues or whole organisms. New tools are described which have a great potential for (pre)clinical development of interventions in a range of illnesses, such as cancer and neurological diseases. Besides describing the promising applications, the authors also highlight the ongoing challenges and opportunities in the field.

Download or read book Japan Research and Development Policy Handbook Volume 1 Strategic Information and Programs written by IBP USA and published by Lulu.com. This book was released on 2007-05 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2011 Updated Reprint. Updated Annually. Japan Research & Development Policy Handbook

Download or read book Micro Nanorobotic Manipulation Systems and Their Applications written by Toshio Fukuda and published by Springer Science & Business Media. This book was released on 2013-02-28 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro/Nano Robotics and Automation technologies have rapidly grown associated with the growth of Micro and Nanotechnologies. This book presents a summary of fundamentals in micro-nano scale engineering and the current state of the art of these technologies. “Micro-Nanorobotic Manipulation Systems and their Applications” introduces these advanced technologies from the basics and applications aspects of Micro/Nano-Robotics and Automation from the prospective micro/nano-scale manipulation. The book is organized in 9 chapters including an overview chapter of Micro/Nanorobotics and Automation technology from the historical view and important related research works. Further chapters are devoted to the physics of micro-nano fields as well as to material and science, microscopes, fabrication technology, importance of biological cell, and control techniques. Furthermore important examples, applications and a concise summary of Micro-Nanorobotics and Automation technologies are given.

Download or read book Micro Nano Technology Systems for Biomedical Applications written by Chih-Ming Ho and published by Oxford University Press. This book was released on 2010-03-25 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: In daily life, we are accustomed to working with length scales of feet or meters, but the building blocks from which our bodies are constructed are many orders of magnitude smaller. The technologies that are being developed to intervene at these minute scales have the potential to improve human health and significantly enrich our lives. Revolutionary micro/nano technology platforms have led to dramatic advances in sample preparation, analysis and cell culture. From the 1990s through to the very beginning of the twenty-first century, the focus was on the development of manufacturing technologies. Through elegant design and sophisticated fabrication, the micro- to nano-scale manipulation of fluids and particles has become routine. Since then, it has become possible to control molecular interactions at device surfaces, and optical manipulation, imaging and sensing techniques can also be incorporated. Micro/nano technology platforms are already being used to study and direct biological processes at the cellular and sub-cellular level, and to detect disease with greater sensitivity and specificity. The challenges and excitement in the near future will be in engineering these sophisticated, multifunctional devices to seamlessly interface with complex biological systems. Providing a clear guide that moves from molecules through devices to systems, this book reviews fundamental aspects of microfluidic devices, including fabrication, surface property control, pressure-driven and electrokinetic flow, and functions such as fluid mixing, particle sorting and molecular separations. The integration of optical and plasmonic imaging, optoelectronic tweezers for single particle manipulation, and optical and electrical signal transduction methods for biosensing are shown to provide extraordinary capabilities for bioanalytical and biomedical applications. These represent key areas of research that will lead to the next generation of micro/nano-based systems. Anyone working in this fast-changing field will benefit from this comprehensive review of the latest thinking, while researchers will find much to inspire and direct their work.

Download or read book Advanced Materials and Technologies for Micro Nano Devices Sensors and Actuators written by Evgeni Gusev and published by Springer. This book was released on 2010-03-03 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: A NATO Advanced Research Workshop (ARW) entitled “Advanced Materials and Technologies for Micro/Nano Devices, Sensors and Actuators” was held in St. Petersburg, Russia, from June 29 to July 2, 2009. The main goal of the Workshop was to examine (at a fundamental level) the very complex scientific issues that pertain to the use of micro- and nano-electromechanical systems (MEMS and NEMS), devices and technologies in next generation commercial and defen- related applications. Micro- and nano-electromechanical systems represent rather broad and diverse technological areas, such as optical systems (micromirrors, waveguides, optical sensors, integrated subsystems), life sciences and lab equipment (micropumps, membranes, lab-on-chip, membranes, microfluidics), sensors (bio-sensors, chemical sensors, gas-phase sensors, sensors integrated with electronics) and RF applications for signal transmission (variable capacitors, tunable filters and antennas, switches, resonators). From a scientific viewpoint, this is a very multi-disciplinary field, including micro- and nano-mechanics (such as stresses in structural materials), electronic effects (e. g. charge transfer), general electrostatics, materials science, surface chemistry, interface science, (nano)tribology, and optics. It is obvious that in order to overcome the problems surrounding next-generation MEMS/NEMS devices and applications it is necessary to tackle them from different angles: theoreticians need to speak with mechanical engineers, and device engineers and modelers to listen to surface physicists. It was therefore one of the main objectives of the workshop to bring together a multidisciplinary team of distinguished researchers.

Download or read book Advanced Non Thermal Power Generation Systems written by Yatish T. Shah and published by CRC Press. This book was released on 2023-11-08 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Generally, sources for power generation are broken down into two categories: thermal and non-thermal. Thermal sources for power generation include combustion, geothermal, solar, nuclear, and waste heat, which essentially provide heat as a means for power generation. This book examines non-thermal (mechanical, electrochemical, nanoscale self-powered, and hybrid) sources of power generation and emphasizes recent advances in distributed power generation systems. Key Features Details recent advances made in wind power, including onshore, offshore, fixed and floating platform, and air wind energy systems, and offers detailed assessments of progress Covers advances in generation of hydropower, exploring dam hydropower, novel wave energy converters, and novel systems and turbines for hydrokinetic energy conversion to power Examines all types of fuel cells and their multi-functional roles, along with hybrid fuel cell systems in complete detail Explores advances in the development of self-powered nanogenerators for use in portable, wearable, and implantable power electronics Focuses on technologies with the best commercial possibilities and provides perspectives on future challenges that need to be solved This book will be of value to all researchers in academia, industry, and government interested in pursuing power generation technologies and seeking a comprehensive understanding of available and emerging non-thermal power generation sources. Readers who are interested in learning about thermal power generation sources can find it in the author’s companion text Advanced Power Generation Systems: Thermal Sources (2023).

Download or read book Handbook of Micromechanics and Nanomechanics written by Shaofan Li and published by CRC Press. This book was released on 2016-04-19 with total page 1256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest developments and applications of micromechanics and nanomechanics. It particularly focuses on some recent applications and impact areas of micromechanics and nanomechanics that have not been discussed in traditional micromechanics and nanomechanics books on metamaterials, micromechanics of ferroelectric/piezoelectric,

Download or read book Biomimicry Materials and Applications written by Inamuddin and published by John Wiley & Sons. This book was released on 2023-09-13 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: BIOMIMICRY MATERIALS AND APPLICATIONS Since the concept of biomimetics was first developed in 1950, the practical applications of biomimetic materials have created a revolution from biotechnology to medicine and most industrial domains, and are the future of commercial work in nearly all fields. Biomimetic materials are basically synthetic materials or man-made materials which can mimic or copy the properties of natural materials. Scientists have created a revolution by mimicking natural polymers through semi-synthetic or fully synthetic methods. There are different methods to mimic a material, such as copying form and shape, copying the process, and finally mimicking at an ecosystem level. This book comprises a detailed description of the materials used to synthesize and form biomimetic materials. It describes the materials in a way that will be far more convenient and easier to understand. The editors have compiled the book so that it can be used in all areas of research, and it shows the properties, preparations, and applications of biomimetic materials currently being used. Readers of this volume will find that: It introduces the synthesis and formation of biomimetic materials; Provides a thorough overview of many industrial applications, such as textiles, management of plant disease detection, and various applications of electroactive polymers; Presents ideas on sustainability and how biomimicry fits within that arena; Deliberates the importance of biomimicry in novel materials. Audience This is a useful guide for engineers, researchers, and students who work on the synthesis, properties, and applications of existing biomimetic materials in academia and industrial settings.

Download or read book A Handbook of Artificial Intelligence in Drug Delivery written by Anil K. Philip and published by Academic Press. This book was released on 2023-03-27 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Handbook of Artificial Intelligence in Drug Delivery explores the use of Artificial Intelligence (AI) in drug delivery strategies. The book covers pharmaceutical AI and drug discovery challenges, Artificial Intelligence tools for drug research, AI enabled intelligent drug delivery systems and next generation novel therapeutics, broad utility of AI for designing novel micro/nanosystems for drug delivery, AI driven personalized medicine and Gene therapy, 3D Organ printing and tissue engineering, Advanced nanosystems based on AI principles (nanorobots, nanomachines), opportunities and challenges using artificial intelligence in ADME/Tox in drug development, commercialization and regulatory perspectives, ethics in AI, and more. This book will be useful to academic and industrial researchers interested in drug delivery, chemical biology, computational chemistry, medicinal chemistry and bioinformatics. The massive time and costs investments in drug research and development necessitate application of more innovative techniques and smart strategies. Focuses on the use of Artificial Intelligence in drug delivery strategies and future impacts Provides insights into how artificial intelligence can be effectively used for the development of advanced drug delivery systems Written by experts in the field of advanced drug delivery systems and digital health

Download or read book Small Business in a Global Economy written by Scott L. Newbert and published by Bloomsbury Publishing USA. This book was released on 2015-05-05 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: This informative set analyzes the dynamics involved with creating, growing, and managing small businesses amid different geographic, institutional, and political environments. This two-volume work explores the behavior and decision making of small companies; their business strategies for launch, growth, and survival; and their contribution to the larger global economy. Utilizing information and data gleaned from proven entrepreneurs and small business operations, this reference provides insight into the political, environmental, and competitive forces that support and impede small business ownership, and offers strategies for navigating them. Written by leading researchers from around the world, the set presents a broad view of the small business sector, focusing on conception, ownership, financing, and growth strategies. A look at external factors features the impact of political and environmental influences; extant regulations affecting small firms; and programs for promoting this sector. The first volume takes a micro view of the small business phenomenon, profiling the owner and the skills necessary to be successful. The second volume utilizes a macro approach, focusing on the operational concerns of and the environment factors bearing upon small businesses.

Download or read book Micromanufacturing and Nanotechnology written by Nitaigour P. Mahalik and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing and Nanotechnology is an emerging technological infrastructure and process that involves manufacturing of products and systems at the micro and nano scale levels. Development of micro and nano scale products and systems are underway due to the reason that they are faster, accurate and less expensive. Moreover, the basic functional units of such systems possesses remarkable mechanical, electronic and chemical properties compared to the macro-scale counterparts. Since this infrastructure has already become the prefered choice for the design and development of next generation products and systems it is now necessary to disseminate the conceptual and practical phenomenological know-how in a broader context. This book incorporates a selection of research and development papers. Its scope is the history and background, underlynig design methodology, application domains and recent developments.